Used Gastronomy Resolution for sale (1,142)

Condition: used, This listing is for a Agilent BioTek 405TS Microplate Washer. The unit is in full working condition and is ready for immediate release. Supplied with: (2) 4 Litre waste bottles Microplate Holder The BioTek 405TS Microplate Washer 405TSRSQ is a top-tier instrument designed to streamline the washing process for various assay types, particularly in cell-based assays, microsphere assays, and ELISA applications. Here’s a detailed overview of its key features and specifications: Key Features: Patented Verify Technology: This innovative feature automatically checks for any blockages in the manifold tubes before initiating a wash cycle, ensuring that each wash is effective and reliable, minimizing the risk of failed assays. Ultrasonic Advantage: This functionality automatically cleans any blocked manifold tubes, helping to prevent clogging and ensuring consistent performance across multiple wash cycles. Kfsdpfexxx H Dex Ah Usa High-Resolution Touch Screen User Interface: The intuitive interface allows for easy setup and control of washing processes for both 96- and 384-well microplates, enhancing usability and flexibility. Dual-Action Manifold: This feature enables independent control and positioning of the aspirate and dispense sections, allowing for precise liquid handling and optimized washing techniques. Optimized Cell Washing: Designed for gentle washing of loosely adherent monolayers, the washer operates at low flow rates with angled dispensing to protect delicate cell structures during the wash process. Biomagnetic Separation and Vacuum Filtration: These optional enhancements provide advanced washing capabilities, expanding the versatility of the instrument for various applications. Specifications: Wash Volume: Configurable from 25 to 3000 μL per well, accommodating a wide range of assay requirements. Microplate Types: Compatible with 96- and 384-well plates, including both low profile and standard height, as well as solid and filter bottom options. Fluid Pump Type: Utilizes a diaphragm pump, ensuring consistent fluid delivery and performance. Instrument Control: Managed through a local touch-screen computer software interface, simplifying operation and customization of wash protocols. Number of Reagents: Capable of handling 1 to 4 reagents, allowing for complex washing and assay procedures.

Condition: new, Year of construction: 2025, The ERBA vibratory finishing bell TAM 220 is ideally suited for surface processing of very small, thin, or delicate parts, while also being capable of handling movable and heavy parts such as chains. It is equipped with a frequency converter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to the speed control, the machine offers the desired precision and is particularly well-suited for very long processing times without process intervention. Technical data: - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm Kodex Ebyyopfx Ah Usfa Prices are net plus the currently applicable statutory VAT and shipping costs. The pictures may show the machine including accessories, which are available optionally and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations are conducted via telecommunications (e-mail, telephone, messaging portal). In the first step, we will send you a non-binding offer, in which we will also inform you of our general terms and conditions including legal notice and your right of withdrawal, before any purchase/contract is concluded.

Condition: new, TC 205 x 1000 Center height: 205 mm Swing diameter over bed: 410 mm center width: 1000 mm bed width: 260 mm spindle nose: DIN 55029 (Camlock) 9, size 6 Kfodpfsir If Dox Ah Uea traverse path cross slide: 220 mm travel top slide: 125 mm spindle bore: 52,5 mm Spindle speeds: 20 - 3000 min-1 Speed control: Stepless Mechanical preload stages: 2 motor power: 3,75 kW coolant pump: 0,13 kW longitudinal feeds Z: 0,05 - 1,7 mm/rev face feeds X: 0,025 - 0,85 mm/rev Whitworth threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 - 14.0 mm Diametrical threads: (21) 8 - 44 DP Module thread: (18) 0.3 - 3.5 MP Quill diameter: 52 mm Internal taper quill: MK 4 quill stroke: 150 mm dimensions: 2270 x 1120 x 1900 mm Weight, approx.: 1500 kg Features: - Machine tool accuracy according to DIN 8605 - Infinitely variable speed control ( 2 preload stages ) - Fine balanced main spindle - Stable machine bed with hardened and ground guides - Monolithic cast iron base - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge Scope of delivery: - 3-axis digital display (resolution 0.005 mm) - 3-jaw lathe chuck - Quick-change tool holder with four cassettes - High splash guard rear wall and integrated LED tray light - Chip tray can be pulled out to the front - Slipping clutch - Fixed steady rest with ball bearing inserts - Travelling steady rest - Micrometer bed stop - Machine shoes (1 set of 6) - Two emergency stop buttons - Foot pedal with double braking device ( mechanical and electrical ) - Limit switch secured chuck protection, rotating steel holder protection and cover of the leading and traction spindle according to the European safety standards CE - Coolant device - 2 fixed center punches - Reducing sleeve for main spindle - Operating tool - Operating tool in tool box - Operating manual with spare parts list

Condition: used, Year of construction: 2011, Used Machine Year of manufacture: 2011 WEBER LCE-2-1350 (DK) Compact Wide Belt Sander with two sanding belts, suitable for calibration, veneer, and intermediate lacquer sanding. Features a constant working height and is equipped as follows: Sanding Units: Contact Roller Unit · Grooved steel contact roller Ø 210 mm for precise calibration · Mechanical adjustment of the contact roller for grit compensation · Pneumatic lifting of the contact roller Combination Unit · Grooved rubber contact roller Ø 130 mm, 60 Shore hardness - mechanical adjustment for grit compensation · Pneumatic lifting of the contact roller · Electronically controlled sanding pad with ISA-System 22/22 ISA (Intelligent Sanding Pressure Adjustment) · Patented segmented pressure beam system with full tolerance compensation Kodpfxex Hll Eo Ah Usfa · Pressure shoe width: 22 mm (movable longitudinally and laterally) · Universal lamella with pinpoint actuation suitable for all sanding applications (no need to change sanding lamella between veneer and solid wood sanding) · Tolerance compensation: +/- 1 mm ISA-Control · High-resolution workpiece detection with a switching roller per pressure shoe · Free feeding of complex part shapes – multiple feeding with minimal lateral spacing · Sanding intensity individually adjustable at all edges · Sanding pressure adjustable via pressure regulator · Feed-controlled infeed and outfeed Drive · Sanding belt speed from 2–18 m/s for high material removal rates · Wear-free DC braking · Self-tensioning belt drive Belt Control · Automatic compensation of unequal sanding belt edge lengths · Optical, contactless, and self-cleaning sanding belt detection on the belt change side · Fine adjustment of oscillation on the belt change side · Belt run-off switches left and right Operator Terminal ‘SIEMENS’ MP 177 6” · Graphical user interface via 6” color display · Program memory for 18 programs · Parameter settings available via program Overthickness Protection · Safety bar at machine infeed with the following functions: · Automatic lifting of contact roller and segmented pressure beam · Feed shutoff Workpiece Feed · Rubber-coated and spring-loaded pressure rollers before and after the sanding station · Secure workpiece transport with multiple feeding ensured by pressure lamella with tolerance compensation · High-quality transport belt made of natural rubber · Infinitely variable feed speeds for calibration and fine sanding · 400 mm table extension at both infeed and outfeed with rollers Technical Specifications · Working width: 1350 mm · Sanding unit drive (frequency controlled): 1 x 15.0 kW Availability: Approx. April 2026 Location: Heidelberg

Year of construction: 2018, operating hours: 31,241 h, condition: like new (used), machine/vehicle number: IntNr231416, CNC-DMG Gildemeister MULTISPRINT 36 / SWISSTYPE machining up to 170 mm turning length Year of manufacture: 2018 Operating hours: 47,548 Machining time: 31,241 Status: October 2025 Control: Fanuc 30i B Maximum flexibility of the MULTISPRINT thanks to its modularity and Y-axes on every spindle position. Use of driven tools on all spindle positions. Y-axis available on all spindle positions as standard. SWISSTYPEkit for short and long turning up to 170 mm length. Chuck or bar machining: bars from 4 to ø 36 mm, chuck parts up to ø 50 mm. Double rear and off-center machining possible. Machine type: Multi-spindle automatic lathe SWISSTYPE machining: up to 170 mm turning length Control: FANUC Series 30i Maximum flexibility thanks to modularity and Y-axes on all spindle positions Use of driven tools on all spindle positions Machining: bars from Ø 4 – 36 mm, chuck parts up to Ø 50 mm Double rear and off-center machining possible Performance Data Feature Value Max. workpiece diameter 36 mm Max. workpiece length 170 mm Max. bar capacity 36 mm Travel (X / Y / Z) 50 / 100 / 170 mm Main spindles Number: 6 C-axes (angular resolution): 0.002° Cross slides: 6 × (X-/Y-axis) Travel Z1–Z6: 170 mm (with SWISSTYPE-Kit) Max. bar capacity: Ø 40 mm Spindle speed: up to 7,500 rpm Drive power (100% duty cycle): 3 kW Torque (100% duty cycle): 32 Nm Drum indexing time: 0.65 s Counter spindles / Pick-up spindles Quantity: 2 (C-axes with X-/Y-/Z-axis) Through bore: Ø 40 mm Spindle speed: 7,500 rpm Drive power: 3 kW Torque: 32 Nm Travel (Z7–Z8): 410 mm Travel (X7–X8 / Y7–Y8): 277 / 312 mm Rapid traverse speed: 40 m/min Tool holders on cross slides Max. number of tools: 3 Spindle speed: 3,900 / 8,000 rpm Drive power (100% duty cycle): 0.9 kW Torque (100% duty cycle): 5.8 / 2.9 / 1.7 Nm Travel (X1–X6 / Y1–Y6): 50 / 100 mm Rapid traverse speed: 20 m/min Slides for rear machining Spindle speed (U7–U8): 3,900 / 8,000 rpm Drive power: 0.9 kW Torque: 5.8 / 2.9 / 1.7 Nm Control display: 15" color monitor (×2) Clamping system: Hainbuch TOPlus 40 quick-change collet chuck Hinged belt chip conveyor with lift pump High-pressure oil system (filters 50 / 25 µm, pumps 5 / 12 MPa) Various tool holders Fire extinguishing system Bar loading magazine (surface loader design) Workpiece loading system Kfedpox Hh Trjfx Ah Uea The machine is fully functional both electrically and mechanically and can be inspected under power by appointment. Subject to technical changes and errors and prior sale!

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Kfodjx Exatopfx Ah Uoa Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: good (used), Year of construction: 2002, Offered here is a used CNC cylindrical grinding machine from the manufacturer Kellenberger, featuring a swiveling B-axis. The machine is currently powered and can be inspected on site. It will be loaded onto a truck free of charge. Manufacturer: Kellenberger Model: Kel-Vista UR 175 Kedex E D Euepfx Ah Ujfa Year of construction: 2002 Control: GE Fanuc Series 21i-T Technical specifications: Key data: Center height: 175 mm Center distance: 1000 mm Grinding length: 1000 mm Workpiece diameter: 349 mm Intermediate unit: Rotating part with automatic indexing, division 2.5° Swivel range: -210°...+10° Workpiece spindle head: Swivel range: -10°...+100° Spindle speed: 8 - 800 rpm Internal taper: Morse taper 5 Guaranteed roundness for chuck work: 1 µm Workpiece weight for between-center grinding: 100 kg Tailstock: Taper: Morse taper 4 Quill stroke: 48 mm Grinding head UR: Left: 400 mm Right: 300 mm Internal grinding attachment: Mounting bore for high-performance internal grinding spindle: 80 mm Lower table (Z-axis): Center distance: 1000 mm Travel max.: 1150 mm Max. speed: 12 m/min Max. resolution: 0.1 µm Upper table: Center distance 1000 mm: 0°-6° With workpiece length under 800 mm: 0°-9° Grinding slide (X-axis): Travel: 320 mm Speed: 6 m/min Max. resolution: 0.1 µm Machine weight: 3,500 kg

Condition: new, Year of construction: 2025, Machine type: BPT 1000 Manufacturer: ERBA Power kW: 2 x 5.5 kW Total volume: 1,000 l Description: Kjdpfx Asx Ebrvsh Usfa The BPT 1000 long trough vibratory finishing machine from ERBA, equipped with dual motors, is ideally suited for ball burnishing or processing heavy workpieces. Thanks to its two powerful motors, it is capable of moving even particularly heavy processing media and provides sufficient pressure on the workpieces. The unit features a durable, hot-cast polyurethane lining. Discharge or separation is carried out via bottom discharge (manual/pneumatic). Insertable dividers allow the work container to be partitioned into sections for individual processing of parts. The machine is equipped with an electrical control cabinet and can optionally be fitted with a fully automatic PLC process control. Motor speed can be continuously adjusted using a frequency converter (optional). The stated price is net, plus the currently applicable statutory VAT and freight costs. The images may show the system including accessories, which are optionally available and subject to additional charges. The quoted price refers to the base machine only. The images are sample photos; the actual appearance and size may differ from those shown. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for extrajudicial online dispute resolution (ODR platform). This offer serves exclusively as a presentation of our products. Contract negotiations take place via telecommunications (email, telephone, messaging portal). As the first step, we will send you a non-binding offer, which will include our general terms and conditions with legal notice and information on your right of withdrawal, before any purchase or contract is concluded.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, machine/vehicle number: DT1UE18105029734, This Rational Ultra Vent hood for Rational combi steamers, including a connection kit, fits the CMP and SCC 61/101 electric combi steamers from 2011 to present (index H+I). The hood has been tested in our in-house workshop and is fully functional. The recommended retail price for this Ultra Vent hood is €3,696 net. The stated price is net, plus 19% VAT. Kfedowd Ixcepfx Ah Usa Service: We are happy to connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We are happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, or Pro. Our used appliance service for you: • 6-month warranty on all electrical parts • Professional overhaul/inspection & expert cleaning • Tested & fully functional - or your money back • Flexible shipping or pickup • Expert advice - before and after purchase • Provision of operating instructions, wiring diagrams, and spare parts • Tested according to DGUV V3 This Ultra Vent hood features patented condensation technology, which captures and traps vapors and fumes. Complex installation measures for exhaust ventilation are a thing of the past. An external connection is completely eliminated. Installation is simple and can even be retrofitted. Technical specifications: • W x D x H: approx. 854 x 1226 x 470 mm • Power supply: 230 V / Hz: 50-60 • Weight: approx. 55 kg • Serial number: DT1UE18105029734 • Year of manufacture: 2018 Condition: used, fully functional Shipping: • Delivery or pickup upon request • Worldwide shipping upon request • Shipping to islands or mountain stations only upon request Do you have questions, require advice, or would you like to view something in person? You can reach us by phone during our opening hours: Monday-Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m.

Condition: used, mileage: 9,231 km, power: 120 kW (163.15 HP), first registration: 09/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, loading space length: 2,566 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0935. 4438382 ----EQUIPMENT * Airbag: Thorax and pelvis side airbag for passenger * Airbag: Thorax and pelvis side airbag for driver * Towing capacity: 2,500 kg * Seats: Double passenger seat * Brake assist, active * Electric parking brake * HOLD function * Wooden floor (cargo area) * Interior lining for cargo area up to roof height - wood * LED lighting strip in cargo area * Cargo securing rail system * Navigation accessory: Live Traffic Information * Navigation * Package: Winter package - Heated driver and passenger seat - Heated windshield washer nozzles - Heated steering wheel * Tire pressure monitoring - front and rear axles (wireless) * Rear view camera, high-resolution, with guide lines * Rear door: double rear doors, opening up to side wall * Seat: Adjustable seat cushion depth for driver * Blind spot assist * Full partition with 1 window * Traffic sign assist Ksdswmz Dwspfx Ah Uofa * Electronic Stability Program (ADAPTIVE ESP) with integrated anti-lock braking system (ABS) - Traction control (ASR) - Electronic brakeforce distribution (EBV) - Brake assist (BAS) * Wiring for trailer socket - electrical wiring for trailer power supply - without towbar control unit * ATTENTION ASSIST * Storage: Front cup holder * Screw-in tow hook front/rear * Passenger airbag * Driver airbag * Exterior mirrors electrically adjustable and heated * Outside temperature display * Battery: buffer battery for start-up * Battery: AGM battery 12 V / 92 Ah * Fastening points in roof frame * Hill-start assist * Third brake light * Adaptive brake lights * Comfort overhead control unit * Diesel particulate filter * Electronic tachometer * Headlight assist * Electric window lifts driver/passenger * Alternator 14 V/250 A * Alternator management * Speed limit 210 km/h * Transmission: 9G-TRONIC * Weight variant 2,800 kg * Seat belt warning for driver/passenger seat * Lockable glove compartment lid * Side cargo area lining * Regulated air conditioning (Tempmatic) * Instrument cluster with pixel-matrix display - operated via multifunction steering wheel buttons - Analog gauges for speedometer and tachometer or fuel level and coolant temperature - High-quality pixel-matrix display in white and red between the large analog gauges * Comfort driver's seat * Comfort closing * Communication module (LTE) for digital services * Headrests * Large fuel tank, approx. 70 liters * Paint: solid color * Steering wheel adjustable in height and reach * Headlight range adjustment * Mercedes-Benz emergency call system communication module (LTE) for digital services including breakdown management * Multifunction steering wheel * Interior lighting in passenger compartment * Navigation: pre-installation * Fog lights * Upholstery: Fabric Caluma black * Radio/Telematics, Audio 10 * Radio: Digital Radio DAB * Radio: Radio generation 2 * Electromechanical power steering * Seat: Lumbar support driver seat * Seats: Driver seat Plus * Active lane keeping assist * Start-stop function * 12V socket * Cruise control * Full partition * Pre-installation for Remote Services Plus * Immobilizer * All-around heat-insulating glass * Central locking with remote control * Registered as commercial vehicle ... and much more. ----The vehicle has not been reconditioned! Nationwide delivery available at an additional cost. Errors and prior sale excepted. We are happy to accept your vehicle in trade. Financing/leasing possible with no down payment! Do you have questions? We ar

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Kfjdpfx Aex A Imzjh Usa Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: used, Year of construction: 2006, Technical details: grinding diameter: 5-55 mm grinding length: 500 mm total power requirement: 44 kW -- Intended use and general information -- Fully automated external and surface grinding of synchronous rings Kfodpfxovg Thie Ah Uea Centre height: 200 mm Grinding length: 500 mm Grinding wheel arrangement: right, 30° angled Grinding wheel dimensions: 600 x 30 x 203.2 mm Drive power: 7 kW X/Z axis drive: ball screw Travel speed: 0.01 - 10,000 mm/min. Resolution: 1 µm Concentricity of workpiece spindle: < 1 µm Workpiece changing system: Fanuc robot Control: Siemens Sinumerik 840-D Machine weight: 7,000 kg Centre height: 200 mm Grinding length: 500 mm *

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,840 h, functionality: fully functional, grinding length: 1,600 mm, grinding width: 600 mm, feed length X-axis: 1,700 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, grinding wheel diameter: 400 mm, distance table to spindle center: 950 mm, table length: 1,600 mm, table width: 600 mm, grinding wheel width: 30 mm, overall weight: 8,000 kg, grinding spindle motor power: 15,000 W, Equipment: documentation/manual, rotational speed infinitely variable, CNC surface grinder BLOHM Planomat 616 HP TECHNICAL CHARACTERISTICS : Year of manufacturing : 2015 CNC control : SIEMENS 840D SL Maximum grinding lenght x width : 1600 x 600 [mm] Stroke X axis (table movement) : 1700 [mm] Min. Stroke speed X axis : 30 [mm/min] Max. Stroke speed X axis : 30000 [mm/min] Resolution X axis : 0.001 [mm] Stroke Y axis (vertical movement) : 800 [mm] Min. Stroke speed Y axis : 4 [mm/min] Max. Stroke speed Y axis : 6000 [mm/min] Resolution Y axis : 0.001 [mm] Course axe Z (transverse movement) : 560 [mm] Min. Stroke speed Z axis : 4 [mm/min] Max. Stroke speed Z axis : 6000 [mm/min] Resolution Z axis : 0.001 [mm] Min. distance spindle nose / table : 150 [mm] Max. distance spindle nose / table : 950 [mm] Grinding spindle motor power : 15 [kW] Max. diameter grinding wheel : 400 [mm] Max. grinding wheel width : 30 [mm] Grinding wheel bore : 127 [mm] Dimensions of magnetic plate : 1600 x 600 [mm] Machine dimensions : 5450 x 3560 x 2800 [mm] Supply voltage : 400 [V] Number of hours under power: 6840 [h] Ksdpjx H Ruxjfx Ah Uofa Weight : 8000 [Kg] EQUIPMENT INCLUDED: x1 coolant tank + paper filtration system DGS type SBF150/650 x1 oil mist extractor (2000 m3/h) SARA type UC 2 SD/S3 x1 1600*600 [mm] electromagnetic clamping plate SAV type B-243.70 - 1600 x 600 - 13 x1 lifting dressing device for peripheral, side and profile dressing x5 grinding wheel flanges x15 grinding wheels Ø400 [mm] x1 wheel balancing bench x1 set of manuals + CD Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to the brands okamoto , jones shipman , jung , favretto , studer see also cylindrical grinder , lathe , machining centre , milling machine

Condition: new, Year of construction: 2025, Machine Type: Turbo 8 Manufacturer: ERBA Power (kW): 0.37 Total Volume: 8 liters Description: The ERBA Turbo 8 is an entry-level centrifugal machine designed for deburring, smoothing, and polishing small to medium-sized workpieces in a short process time. The machine features a digital process timer and a digital speed display. The plate speed can be adjusted via frequency converter. The Turbo 8 is available in both dry and wet versions. The listed price is net, plus the statutory VAT applicable at the time of sale, and shipping costs. The images may show the system including optional accessories, which are available separately and subject to additional charges. The stated price refers to the base machine only. Sample photos are shown; actual appearance and dimensions may vary from those depicted. If you are interested, we look forward to hearing from you. We are happy to provide you with individual, non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Kfedpjx Ebqlofx Ah Uja This offer is for online presentation purposes only. Contract negotiation takes place via telecommunication (email, phone, messaging portal). In the first step, we will provide you with a non-binding offer, which will also include our general terms and conditions with legal notice and information on the right of withdrawal, before any purchase or contract is concluded.

Condition: used, CITIZEN CINCOM M-16 is a CNC automatic lathe engineered for precision, high accuracy and reliable operation. It features a total of 13 axes, max. turning diameter 16 mm, turning length 200 mm and internal spindle diameter 20 mm; main and counter spindles up to 12,000 rpm, driven tools up to 8,000 rpm; C‑axis resolution 0.001°. Key specs: spindle motor 2.2 kW, total power required 8 kVA, machine weight approx. 2,900 kg, overall dimensions L2450×W1320×H1700 mm; revolver turret with 10 tools. Built for high-precision production, it achieves tight tolerances and suits automotive, watchmaking, machine tool, aerospace and medical applications. Kedex Hfm Aepfx Ah Usfa

Condition: new, input voltage: 400 V, total width: 1,200 mm, GAS STOVE – BARTSCHER 6 Burners + Electric Oven | BRAND NEW | NEVER USED For sale: a brand new, never used professional gas stove from the renowned brand Bartscher. Ideal for restaurants, bakeries, fast-food outlets, and all professional kitchens. ✅ Key Features: 6 high-performance gas burners Integrated electric oven with large capacity Kedpfxsx Aip Ds Ah Ujfa Stainless steel construction – durable and easy to clean Professional build quality for continuous operation Perfect for all types of commercial gastronomy Original Bartscher product known for long-lasting performance Condition: NEW

Condition: good (used), Unikon UN-ECO Tray washer Serial: M96231 Stainless tray washer, max tray width 480mm x max tray height 350mm, overall length 2540mm, hot water, recirculation pump with tank and filter, 3Ph Kfjdpfxev Rglps Ah Usa

Condition: ready for operation (used), Year of construction: 2023, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Kjdpfx Ajx Ih A Neh Ujfa

Condition: good (used), Year of construction: 1999, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 650341, Year 1999 with Fanuc 18 TB – 3 axes XZB Marposs E30/E20 Country of manufacture: Switzerland Voltage: 400V/50Hz/3ph Dimensions: 410 x 220 x 190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° B axis, resolution 0.1'': R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° to (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper: MT5 Reducing sleeve: MT5/MT4 Short external taper fitting: DIN 55026 / Size 5 Permissible torque: 160 Nm Guaranteed roundness for chuck work Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper fitting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Grinding wheel data (max. speed) Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR Grinding Head Power: 9.2 kW / 12.5 HP Wheel mounting, left max.: Ø 500 x 80 mm Right, additional max.: Ø 400 x 63 mm Kjdpfx Ajw T Tb Hsh Ujfa Internal grinding device: spindle HJN 828 Lower table (Z axis) Distance between centers: 1000 mm Max. travel: 1150 mm Max. speed: 15 m/min Max. resolution: 0.1 µm Upper table Distance between centers: 1000 mm / swivel 0° to 9° Grinding carriage (X axis) Max. travel: 320 mm Max. speed: 7.5 m/min Max. resolution: 0.1 µm Pneumatics Min. connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max. connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Unless otherwise stated, technical data is provided without engagement and may be subject to errors or omissions.

Condition: new, Year of construction: 2025, Machine type: EVP 30 Manufacturer: ERBA Power kW: 0.95 Total volume: 30 l Description: The ERBA EVP 30 vibratory finishing machine is ideal for processing small workpieces or for use as an entry-level or pilot plant. It features a flat processing bowl bottom without separation. Emptying or separation is performed via the bottom discharge (manual or pneumatic). The motor speed can be infinitely adjusted via a frequency inverter (optional). The system can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and long service life, which is also based on the hot-cast polyurethane lining of the processing bowl. Prices are net, plus the current statutory VAT and freight costs. The images may show the machine including accessories which are optionally available and subject to an additional charge. If interested, we look forward to hearing from you. We are happy to offer you advice without obligation. Kfsdpfx Ahex Ebmyo Uea The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, telephone, messaging platform). In the first step, we will send you a non-binding offer, which will also inform you of our general terms and conditions with legal notice and your right of withdrawal, before a purchase/contract is concluded.

Year of construction: 2008, condition: good (used), Doyon FC2E Pizza oven Kfodsualy Espfx Ah Usa Serial: 7092 2008, Jet air bake pizza oven, conveyor dimensions 900mm W x 1000mm L, variable speed, adjustable temperature control, mobile, 3Ph

Condition: excellent (used), Year of construction: 2001, operating hours: 4,500 h, functionality: unexamined, machine/vehicle number: 090119, Manufacturing origin CE - Germany Voltage 400V Netweight 7500 kg Custom position 8458.91 20 Dimensions 2,9 x 2,3 x 2,3 m. 29731 hrs - work 4500h rs TECHNICAL DATA AXES Maximum travel X-axis 400 mm Maximum travel Y-axis 300 mm Maximum travel Z1-axis 475 mm Maximum travel Z2-axis 475 mm Relative positions B-axis 0,0001 – 360° Relative Position C1/C2-axis 0,0001 – 360° WORKPIECE Maximum cubic dimensions 80x80x80 mm Maximum weight 5 kg TURRET Number of stations 24 Number of controlled stations 18 Number of steady stations 6 Maximum tool attachment (round) Ø 20 mm Maximum tool attachment (square) 16x16 mm (20x20) Maximum trajectory of turret above tool’s point 500 mm Rotation speed of live tools 1-9000 min-1 SPINDLE Maximum rotation speed 6000 min-1 Maximum bars diameter Ø 42 mm Maximum forced chuck clamping 140 mm BARS MACHINING Maximum bar length for bar’s feed 1000 mm Maximum piece size for the bar taker Ø42 x Long.100 mm Maximum diameter of taker’s collets 42 mm Pulling and pressure force of clamping cylinder 20000N FEEDS X-axis advance force abt.895 daN Y-axis advance force abt.895 daN Z1-axis advance force abt.895 daN Z2-axis advance force abt.895 daN Fast moves axes X/Y/Z 20 m/min Motor’s torque of tool control 2,4 Nm Spindle S1 / Spindle S2 70Nm COOLING (values only as indication) Capacity of pump submerged inside chips conveyor 10 l/min for abt. 4,5 bar 80 l/min 3,2 bar 150 l/min 0,7 bar Capacity of overpressure pump inside conveyor 10 l/min 13,2 bar 50 l/min 9 bar 90 l/min 1 bar Lubricating coolant volume inside conveyor abt.134 L. Coolant volume inside cooling aggregate 45 L. NUMERIC CONTROL Siemens 840D MACHINING PRECISION Resolution axes X/Y/Z 0,1 µm Resolution axe B 0,0001° Resolution axe C 0,0001° Kfsdpfjht Hg Dsx Ah Uea Positioning precision 5 µm Repeatability 0,6 µm Maximum error on workpiece’s concentricity 0,5 µm ELECTRIC Spindle 1 / Spindle 2 (at 100%) 11 kW Spindle 1 / Spindle 2 (at 40 %) 15 kW Advance motors axes X/Y/Z1/Z2 1,3 kW Axis B 1,3 kW Tool control 2,3 kW Hydraulic pump 7,5 kW Hydraulic back movement 0,75 kW Cooling aggregate fan 1 / 2 0,18 kW Circulation pump of cooling aggregate 1,1 kW Compressor of cooling aggregate 2,2 kW Chips ejector 0,25 kW Emulsion pump 1 1,1 kW Emulsion pump 2 2,2 kW Operation tension 400 V Network frequency 50Hz (60option) Control tension 24V DC Absorbed power 35 kW Nominal current 63A Connecting réseau TM / TT / IT PNEUMATIC Maximum operation pressure 10 bar Normal operation pressure 6 bar Minimal operation pressure 5 bar Air output env. 150 L/min Valves tension 24V DC Oil-mist lubrication tank capacity 12 L Quality level 2 selon Pneurop6611 NOISE LEVEL Normal use 78—80 dB errors and omissions excepted-data given without obligation Inventory no.2321018, machine equipped with : Chip conveyor Preparation for bar feeder Tool holders : 6 fixed drills ER32 8 turning tool holders 5 live tool holders ER32 4 live tool holders ER25 6 live tool holders ER20

Condition: refurbished (used), Year of construction: 2004, machine/vehicle number: 350735, Manufacturing origin Swiss Voltage 380/50/3 Netweight 1570 kg Custom position 8458.1120 Dimensions 1830x1260x1700 mm TECHNICAL DATA Capacities Max. turning diameter Ø 270 mm Max. swing over carriage Ø 115 mm Centre height over carriage 60 mm Turning length B32 265 mm Headstock A2-4 Spindle for Schaublin collets W20 / W25 / F38 / B32 Spindle speed, continuous 50 - 5'000 min-1 Spindle inner diameter (without chuck key) 39 mm Max. bar passage in collet W20 14,5 mm Max. bar passage in automatic chuck 32 mm Max. recommended turning diameter 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar 1'150 daN Cross slide Cross travel, X axis 180 mm Kfsdpfx Ahjhr Rtns Usa Resolution, X-axis (at radius) 0,0005 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 20 x 5 mm Longitudinal travel, Z axis 390 mm Resolution, Z axis 0.001 mm AC motor drive, continuous / intermittent torque 4 / 14 Nm Ball screw, diameter x pitch Ø 32 x 5 mm Feed rates Working feeds, X and Z axis, stepless 0 - 5 m/min Rapid feeds, X and Z axis 8 m/min Feed forces, X / Z axis, continuous 503 / 503 daN Tooling system: Revolver Standardised tool holder attachment VDI 20 Number of tool stations 8 Number of live tool stations 4 AC motor drive, continuous / intermittent 0.55 / 1.1 kW Spindle speed, stepless 30 - 5'000 min-1 Max. tool cross-section 16 x 16 mm Integrated coolant and indexing in both directions yes Cooling Tank capacity 55 L Pump capacity 10 L/min Pressure 1.7 bar Pneumatic tailstock Taper of the spindle sleeve Morse 3 Spindle outer diameter 45 mm Spindle stroke 70 mm Adjustable contact force 25 - 260 daN Tip height from ground 1'162 mm errors and omissions excepted data gived without obligation

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Kedpfxjw Ucyuo Ah Usfa Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Ksdpfx Asw T Sn Ejh Usfa Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.