Used Gathering Tower for sale (543)

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system External dimensions: Height 10,000 mm Width 1,600 mm Depth 2,680 mm 45/90 beams with 250 kg payload each in the clear usable dimensions: W = 1,250 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Dkedpfx Agervkrfs Rok Start of the service opening at 865 mm above the top floor, then 850 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surfaces cleaned, signs of wear and minor deformations possible Performance data Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 Volt Additional extras: Manual lift door Subject to errors, technical changes, and deviations from the photos. Images of a similar machine. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system External dimensions: Height 9,500 mm Width 2,200 mm Depth 2,700 mm 58 beams, each with a payload of 190 kg with clear usable dimensions: W = 1,850 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Start of the access opening 900 mm above the top floor, then 850 mm high Dkodpfx Agodnlkhj Rek Color: GRAY/BLUE, beams sendzimier-galvanized Surfaces cleaned, signs of wear possible Performance data Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.25 kW / 400 volts More Extras: Manual lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 2 identical machines available Dkodpfx Aednh R Hsg Rsk External dimensions: Height 4340 mm Width 3270 mm Depth 1680 mm 26 supports, each with a payload of 250 kg In the clear usable dimensions: H = 215 mm W = 2730 mm D = 620 mm Chain pitch 254 mm Intermediate shelves are available for 0 support sets, allowing a payload of 120 kg per usable level. Intermediate shelves can be manufactured upon request. Storage table at a height of 900 mm above the top of the machine - V2A steel worktop cover Color: gray / gray, Surface cleaned, signs of wear and minor deformations possible Drive motor power: 2 x 1.5 kW / 400 Volt Subject to errors, technical changes, or deviations in detail in the illustrations. Photos of a similar machine. Assembly currently mainly in Germany, Austria, and some neighboring countries.

Condition: reconditioned (used), Currently, two identical machines are still available. Mechanically redesigned machine with new LTG StoreControl L control system. External dimensions: Height 5,200 mm (adjustment possible for an additional charge) Width 1,600 mm Depth 2,800 mm 38 beams, each with a payload of 250 kg with clear usable dimensions: W = 1,300 mm D = 825 mm Dsdpfx Agjd Hxpvo Rekk H from 55 to 750 mm Total machine load capacity up to 2 x 10,000 kg Start of the access opening at 875 mm above the top floor, then 875 mm high Color: GRAY/BLUE, beams are sendzimier-galvanized, surfaces cleaned, signs of wear may occur. Performance data: Vertical drive 1 x 3.5 kW / 400 Volt Horizontal drive 1 x 0.75 kW / 400 Volt Subject to errors, technical changes, and deviations from the photos. Delivery and installation currently primarily in Germany, Austria, and several neighboring countries.

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Dkodpfednfdlox Ag Rek Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system Currently 6 identical machines available Dkodpfod Sphijx Ag Rek External dimensions: Height 4889 mm Width 2785 mm Depth 2810 mm Total machine load capacity up to 2 x 15,000 kg 63 beams with center bar for up to 400 kg load each In the clear usable dimensions: W = 2460 mm D = 825 mm Usable height up to 55 to 750 mm Start of the service opening 875 mm above the top floor, then 875 mm high Motor ratings Vertical drive 6 kW / 400 volts Horizontal drive 0.55 kW / 400 volts Color: gray/blue Surface cleaned, signs of wear possible Subject to change Errors and technical changes or deviations in details in photos, delivery, and assembly currently mainly in Germany, Austria, and several neighboring countries

Condition: ready for operation (used), Year of construction: 2019, An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible. Djdpjwrrrcofx Ag Rjkk

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Dodsxv Au Tspfx Ag Rekk

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Kemper CleanAirTower - CleanAirTower room air purification Energy-efficient room ventilation based on the displacement ventilation principle for welding fumes in production halls Application area: - For production and storage halls with high dust loads - Workshops where local extraction is not possible - As a supplement to local extraction systems - Environments with changing sources of dust/fume Benefits/Features: - Effective energy capture through Pinball method and Tornado principle - Low risk from foreign objects - Reduced heating costs due to air recirculation and distribution - Long filter service life through optimized airflow - High safety due to dust disposal without contamination - Cost-effective installation, also retrofittable, as no ducting is required - New head element retrofittable to existing systems Dedpfx Agswthbvs Rjkk - Safe transport and easy installation via crane lugs - KEMPER-Cloud connection via mobile network Technical data: * max. volumetric flow: 6,000 m³/h * filter area: 60 m² * motor power: 5.5 kW * supply voltage: 3 x 400 V, 50 Hz * control voltage: 24 V DC * rated current: 11.0 A * sound pressure level: 72 dB(A) * compressed air connection: 5 - 6 bar * dimensions (W x H): 1,172 x 3,622 mm * weight: approx. 666 kg

Condition: good (used), Year of construction: 2016, Year of production: 2016 Voltage: 400 V / 50 Hz Motor power: 2 x 3 kW Air volume: 10.000 m3/h Filter area: 76 m2 Number of filters: 4 pieces Djdpfxjixtlre Ag Rokk Max. pressure: 2800 Pa Size: 2050 x 1515 x 2910 mm Weight: ca. 980 kg

Condition: excellent (used), Year of construction: 2019, Year of production: 2019 Voltage: 400 V / 50 Hz Motor power: 2 x 4 kW Air volume: 15.000 m3/h Filter area: 160 m2/4 Max. pressure: 2800 Pa Size (L x w x H): 2060 x 1515 x 3310 Weight: 1200 kg Dodpsvq Ncwefx Ag Rokk

Condition: used, Year of construction: 2016, Perfect binding line Kolbus KM 610 Year: 2016-2018 Consisting of Gathering machine Kolbus ZU 832.A Year: 2016 Description: - Hand feeding station - Horizontal feeder(s): 15 - ATC thickness control - Optical sheet control - Air center: Backer VariAir - Set up element - Reject gate for incomplete products: AS 842.A - Transfer into the binder Perfect binder Kolbus KM 610.A Year: 2016 Description: - Automatic setting - Co-Pilot with touch screen - Book measuring table: MT 600.A - Kolbus AFS 702.W, excl. license. (remote diagnostics) - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.B - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson smelting unit - Kolbus XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Stream cover feeder: SAL 610.A - Scoring station: 4 x - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Conveyor tower Front cutter Kolbus FA 650 Year: 2018 Description: - TFT Touch screen - Throughfeed Three knife trimmer Kolbus HD 143.P Year: 2016 Description: - Co-Pilot with touchscreen - Right hand infeed - Cut counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 18 Book stacker Kolbus KL 501 Year: 2016 Description: - Co-Pilot with touchscreen - Delivery to the right - Straight delivery Dodpfxoyybqko Ag Rskk Palletiser Kolbus PL 771.E Year: 2018 Description: - Automatic setting - Blocking station: SR 501 stack-aliner - Turning device - Pallet dispenser - Slip sheet feeder - Pallet delivery station

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable Djdpfx Agjxuad Ao Rjkk - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011

Condition: ready for operation (used), Year of construction: 1993, Machine number 135 Built in 1993 Size max 510 x 290 x 65 mm min 125 x 100 x 3 mm Book block thickness max 65 mm Dksdpfx Agsxykdqs Rjk min 3 mm Speed max 10.000 c/h Equipment: • 24 stations gather • book bloc feeder • endsheet tipping unit • 32 Clamps • milling and roughening station • hotmelt spine glue station • hotmelt side glue station • cold spine glue station • Kolbus HL Premelter • Nordson Premelter • Nordson Premelter • Slauterback Premelter • stream Cover Feeder • 2 pressing stations • laydown delivery • Cooling Tower • Kolbus Transport Conveyor w/ All Associated Conveyors • Controls • Large Assortment of Spare Parts

Condition: good (used), Year of construction: 2004, functionality: fully functional, Equipment gathering machine • 6 stations • gatherer Ferag • reject unit • 2 jogging elements perfect binder • perfect binder Publica KM 410 • copilot with touch screen • 40 clamps • infeed incl. coupling with ZU • 2 milling stations • strip milling head • 4 spine preparation stations • hotmelt spine gluing unit • 2nd hotmelt spine gluing unit • hotmelt side gluing unit • 3 premelters • stream cover feeder SAL 411 • cover scoring 4 lines • 2 pressing stations • straight delivery • lay down device • quality control with individual product rejection conveyor system • length ca. 50 m • drying tower XAF • intermediate delivery • belt control cabinet TS.E three knife trimmer • three knife trimmer HD 152.P • right hand infeed with pre stacker • copilot with touch screen • cutting tables • knife adjustment device • 2 sets of knives Dsdsrf U Iiopfx Ag Rskk compensating stacker • compensating stacker CB 16 • counting device • delivery right

Condition: ready for operation (used), Year of construction: 2006, Built in 2006 Size max 320 x 510 x 70 mm Speed max 15.000 c/h Gatherer 18 stacions ZU 841 - Optical sheet control: SignalLynx - ATC thikness control 1 Reject AS 841 Perfectbinder - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Base for 1st spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - Base for side glue system - Hotmelt side glue unit, interchangeable Dkedpjx Np Szjfx Ag Rjk - Premelter for side glue unit: LH 375.A - Stream cover feeder: SAL 411.C - Scoring station max: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE - Transport system, length (approx) 50 meters - Conveyor tower Ambaflex - Reject unit Three knife trimmer Kolbus HD 152P - counter: 14,367 mio—only!!! - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Stacker - Rima Stacker 3310 ( Kolbus XRS 130) - Rima Statik device 110

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: Dksdet Rmhaepfx Ag Rok - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2017, Year: 2017 (November) Condition: perfect Counter condition: only 1.5 M - Inspection possible - Available - immediatley Configuration: - 2 x Tower DSC 10/60 - 1 x stitching and folding unit DBM 600 - 1 x front trimmer DBM 600T - 1 x long delivery - 1 x jogger Technical Specification - Duplo DSC 10/60 (gathering towers) - Paper Size and Media - Minimum size: approx. 120 × 148 mm - Maximum size: approx. 350 × 500 mm - (up to 350 × 610 mm for some versions) - Paper weight: - standard: approx. 52–300 g/m² - coated paper: approx. 79–300 g/m² - Media types: loose sheets, folded sheets, cross-folded sheets Capacity and Performance - Bin capacity: approx. 60–65 mm per station - Collating speed: up to 9,000–10,000 sets/hour (depending on configuration) - Inline production speed: approx. 4,000–5,000 booklets/hour Feeding and Transport System - vacuum belt feeding with air separation (Air Management System) - Error detection: double sheet detection, missing sheet detection, paper jam detection - Additional features: automatic calibration for different paper types Technical Specification - Duplo DBM-600 / DBM-600T (Stitching & Folding Unit – 600i Booklet System) - Paper Size and Media - Sheet size (min.): approx. 105 × 170 mm - Sheet size (max.): approx. 356 × 508 mm - (up to 230 × 610 mm for long sheets) - Supported formats: - A4, A3, B4, B5, Letter, Legal (various orientations) Capacity and Performance - Production speed: up to 5,200 booklets/hour - 2-up production speed: up to 9,000 booklets/hour (with trimmer) - Folding capacity: up to 30 sheets (80 gsm) - Stitching capacity: up to 50 sheets (80 gsm) - (approx. 5 mm thickness, depending on paper) - Maximum booklet thickness: approx. 6 mm (≈120 pages) Stitching System - Number of heads: 2 standard (optional 4 stitching heads – not included) - Stitch types: saddle stitching, side stitching, corner stitching - stitch & fold / fold only - Stitch head type: Hohner 43/6S - Stitch distance (1-up): approx. 60–320 mm Booklet Formats - Finished booklet size (1-up): - max: approx. 350 × 254 mm - min: approx. 120 × 75 mm - Untrimmed booklet size: - max: approx. 356 × 254 mm Trimming Unit - Duplo DBM-600T - Face trimming (standard): - adjustable trim range - head & foot trimming - 2-up processing capability - trim range: approx. 2–60 mm Folding System - Type: automatic roller folding system - Adjustment: fine tuning from approx. 0.1 mm Control and Automation - Control system: PC-controlled interface - graphical user interface (GUI) - Automation features: fully automatic setup, job memory and recall Dsdpoyxf Nujfx Ag Rjkk - quick changeover between jobs Electrical and Physical Data - Power supply: 220–240 V, 50/60 Hz - Power consumption: - DBM-600: approx. 465 W - DBM-600T: approx. 645 W - Dimensions (DBM-600): approx. 1848 × 929 × 1227 mm - Weight (DBM-600): approx. 377 kg

Condition: excellent (used), Year of construction: 2005, operating hours: 66 h, functionality: fully functional, machine/vehicle number: MMFE 965122, Perfect binding line Acoro A5, 28-station gathering machine type 1571, tensioning element + handfeeding unit, 2x vacuum pumps, in-house blow air, reject gate type 1572 NN19204 FE 965122 for incomplete products, spiral raceway type 3641 MMFFE 965122/025, transfer unit to perfect binder type 3635 MMFE 965122 prepared for book block feeder, 20-clamp Acoro A5, main milling station, pre-stations with roughening and notching, hotmelt spine and side glue, spine glue premelter c80, side glue premelter, PUR spine glue, PUR premelter, gauzing station, pile cover feeder, scoring station, double nipping station, laydown onto conveyor system. Solema drying tower one up and one down, total drying conveyor length approx. 40 m. Reject gate, Merit-S three-knife trimmer right-hand infeed machine number 358465/361275, Uno compensating book stacker machine number 15340411 NNN 33114. Djdpox Rym Esfx Ag Rjkk

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps Dkjdsvg Ad Tspfx Ag Rsk - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: good (used), Year of construction: 2006, Horizon Stichliner SL5500: Dodpfxsvmfxgs Ag Rskk Gathering towers VAC 60a+m+m+m ST40, Horizon ASF 30, SPF 30 Trimmer HTC 30 Counter reading only 14.2 million

Condition: used, Year of construction: 2007, (2007) Matsuura HPlus 300 PC11 CNC Horizontal Pallet Changing Machining Centre With Matsuura G-Tech 30i Contro Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=560mm, 'Z'=500mm, 'B'=0-360° (0.001° Increment). Distance Spindle Nose To Table 80-640 mm. Rapid Traverse 'XYZ'=60,000mm/min, 'B'=100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT 40. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950 (2007). Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). Dsdpfx Aoyw Thceg Rekk With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Quantity Of Pallets With Tombstones, Spin Window, Hand Wheel, Signal Tower, Full Manuals, Tool Holders, Back Up CD/USB & Maintenance Records. New Spindle 18 Months ago at a cost of £20,000. Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice).

Condition: excellent (used), Year of construction: 2019, Ref:11075 . 2022 Horizon Stitchliner Mark III Only 8.35 million books made! Latest generation, fully automatic setting Sheet Collating and Saddle Stitched Booklet System. Features: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Dedpfxjywlifj Ag Rskk Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: Simple, fast set-ups by non-specialist finishing operators Works from flat-sheet 4-page sections No need to pre-fold Integrated automatic set-up 3-knife trimmer High quality books with sharp spine definition Comprising: 12 station (1 x VAC 600Ha + 1 x VAC 600Hm) 6 station tower suction collators with touch-screen control, double- and miss-sheet control. ST-40 stacker to Accumulator/Folder ACF-40 with double gate-fold to; SPF-40 Saddle stitcher with 4 x Hohner 43/6S stitching heads to; HTS-40 Three knife trimmer unit with centre cut PK-30 Kicker Shingle delivery belt.

Year of construction: 2011, condition: used, Card gluer Kolbus KK 841 Year: 2011 Hotmelt glue unit: Nordson Problue 4 Dodpfx Ageyyb Sbs Rskk Compatable with Kolbus gatherer: ZU 841.B

Condition: used, Year of construction: 2014, 2014 Citizen M32-Vlll 15 Axis CNC Sliding Headstock Automatic Lathe With Iemca Boss 338-HD/R 37LL Barfeeder - With Cool Blaster CB510 high Pressure Coolant System, Tooling In Machine, Parts Catcher, Absolent A.mist10S Mist Extraction Unit, Nobel Fire Suppression Unit, Signal Tower & Manuals. Iemca Boss 338-HD 37LL Bar Feeder Length 4,600mm, S/No. 021522NA06 (2015). Max Machining Ø32mm. Max Machining Length 320mm(1/Chucking) . Max Front Drilling Ø12mm. Max Front Tapping M10. Through Spindle Ø36mm. Max Main Spindle Speed ​​8,000rpm (Motor 3.7/7.5kW). Max. Drilling Diameter For The Gang Rotary Tool Ø8mm. Max. Tapping Diameter For The Gang Rotary Tool M6. Spindle Speed Of The Gang Rotary Tool 6,000rpm (1kW Motor). Max. Drilling Diameter For The Turret Rotary Tool Ø10mm. Max. Tapping Diameter For The Turret Rotary Tool M8. Spindle Speed Of The Turret Rotary Tool 6,000rpm (0.75/1.5kW Motor). Max. Drilling Diameter For The Back Spindle Ø10mm. Max. Tapping Diameter For The Back Spindle M10. Back Spindle Speed 8,000rpm (2.2/3.7kW Motor). Max. Drilling Diameter For The Back Tool Post Rotary Tool Ø8mm. Max. Tapping Diameter For The Back Tool Post Rotary Tool M6. Spindle Speed Of The Back Tool Post Rotary Tool (1kW Motor). Max. Chuck Diameter Of The Back Spindle Ø32mm. Max. Protrusion Length Of The Back Spindle Workpiece 65mm. Max. Protrusion Length 145mm. Number Of Tools To Be Mounted 31+ α. Gang Tool Post 5. Gang Rotary Tool 4. Gang B Axis Rotary Tool 3. Number Of Turret Station 10. Back Tool Post 9. Tool Dimension Tool (Gang Tool Post) 16 x 16mm. Sleeve φ25.4mm. Chuck And Bushing Main Spindle Collet Chuck FC081-M, Back Spindle Collet Chuck FC081-M-K, Guide Bushing FG531-M. Rapid Feed Rate All Axes (Except ‘X2 & Y2’) 32m/min, ‘X2’ Axis 18m/min, ‘Y2’ Axis 8m/min, ‘Y3’ Axis 32m/min. Centre Height 1,150mm. Input Power Capacity 20kVA. Weight 3,650kg. S/No.P30498 (2014). Dodpfsyx H A Nsx Ag Rjkk