Used Gildemeister Nef for sale (236)

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Turret w/8 stations Control: Siemens Sinumerik 840 C Cgodpoy Hppzofx Ahvow Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510 Control: Siemens 840 D with Shop - Turn Year of manufacture: 2004 Travel X / Z: 300 / 1050 mm Turret: 12 stations Cgedpfx Ahey N S E Revsw Tool holder: VDI 40 Spindle speed up to: 3,500 rpm Bar capacity: 90 mm Quill travel: 150 mm Tailstock Coolant pressure: 20 bar Chuck size: 315 mm Spindle hours approx.: 14,000 * Batch sizes of 0 - 5 have been produced on the machine * Programming was carried out directly at the machine

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 68,921 h, functionality: not functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, spindle speed (max.): 2,800 rpm, overall weight: 3,200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control system: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 – 2,800 rpm Gear stages: 3 Maximum swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder type: C Tailstock quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m Note: Csdpfx Aey Hr U Hjhvsgw The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of supply: 1 used Gildemeister NEF 500 Plus cycle lathe Condition: The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH

Condition: used, GILDEMEISTER GM35 AC MULTISPINDLE LATHE WITH PIETRO CUCCHI LOADER Cgodpfjwrpb Ijx Ahvjw We can offer a lathe and loader overhauled as new with CE certificate

Condition: new, Lathe completely overhauled, both electrically and mechanically, restored to like-new condition with repainting. Replacement of the electrical cabinet with a Siemens Series 1500 PLC. Overhead control panel. Replacement of cables and microswitches. Overhaul of the main motor. Replacement of the leaking lubrication oil pump. Replacement of the tool cooling pump. Check of the door closing system with an electromechanical system. Pneumatic unit. Loader interface. End-of-bar position 1. Replacement of all bearings. Overhaul of carriages. Cjdpfx Aod Hza Iohvsgw Replacement of camshafts. Replacement of all lubrication distributors. Replacement of working and threading clutches. Pneumatic tailstock. Fixed and rotating front chucks. Diameter variation 20. CE certification with attached documents.

Condition: new, Year of construction: 2024, Gildemeister 42ACF: is an automatic multi-spindle lathe designed to meet the demands of high-efficiency production. This model stands out for its versatility, capable of machining workpieces up to 42 mm in size with equal ease and precision. The 42ACF lathe offers a number of features that make it particularly easy to use. These include intuitive programming via a SIEMENS operator panel that makes it easy to set and change spindle rpm, cycle time and threading speed. Technical data: ● Number of spindles: 6 ● Maximum bar diameter: 42 [mm] ● Hexagonal wrench: 36 [mm] ● Cross bars : 4 (pos.1-2-4-5) ● Maximum feed length : 130 [mm] ● Main spindle speeds : 400- 4000 [rpm] without threading ● Travel time: 1-1.5 [s] ● Cycle time: 2 to 90 [s] ● Power: 22 [KW] Cedpfxerpniqs Ahvsgw The Gildemeister 42ACF, on the other hand, is a multi-spindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: new, TECHNICAL DATA: - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 Cgodpfoq Nzl Tsx Ahvsw DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: like new (used), Lathe completely overhauled from an electrical and mechanical point of view as new with painting Cedpfewit Elsx Ahvsgw

Condition: new, Year of construction: 2024, Gildemeister 20ACN allows, again via SIEMENS operator panel, to set and change spindle rpm, cycle time and thread speed easily. It can machine workpieces up to 25 mm in size with equal ease and precision. It offers the possibility of mounting NC slides. Position 6 consists of: NC parting slide and NC take-up slide, NC take-up spindle with variable rpm, with synchronization and stop. The NC take-up spindle, specifically programmed, has the option of becoming a C-axis. Technical data: - Max. round bar diameter mm 20 / 25 - Max. square bar diameter mm 17 - Bar pusher mm 100 / 125 - Front spindle stroke mm 86 - Longitudinal guide block stroke mm 50 - Radial slide stroke mm 42 / CNC 50 - Axial slide stroke mm 50 / CNC 56 - CNC cutting stroke mm 42 - CNC pickup slide stroke mm 42 - CNC Pickup Spindle Stroke mm 100 - Continuous spindle speed rpm rpm 420 - 5,000 Cjdpfxouqh Ihs Ahvjgw - Rapid traverse times s 0.5 - 0.7 - Main drive power 11 kW / CNC 15 kW - Installation area without bar guide mm 4,000 x 1,900 - Net weight kg 5,500 The Gildemeister 20AC, on the other hand, is a multispindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: used, Year of construction: 2007, Technical details: turning diameter: 325 mm turning length: 600 mm total power requirement: 35 kW spindle drive: 25 kW spindle turning speed range: 5000 U/min Csdpfx Aevgb Epshvogw speeds of tool: 4500 U/min rapid traverse X-axis: 60 m/min diverse toolholders: VDI 40 rapid traverse Z-axis: 45 m/min weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3,5 x 2,5 x 2,1 m Machine with SIEMENS 840 D control power line with shopturn - C and Y-axis, driven tools - bar loader IRCO ILS-RBK - coolant device with coolant throough revolving head - Revolver - counter spindle - chip conveyor - collet clamping - part catcher *

Condition: used, Year of construction: 2011, Technical details: Cgodpfx Ahsyz Sdqovjw weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center from the manufacturer DMG, type CTX beta 800, built in 2009. Available immediately. The machine is in good condition and fully functional. Technically sound and ready for immediate use. Technical data: Machine type: CNC turning center Manufacturer: DMG Type: CTX beta 800 Cedpfoyq Hq Nsx Ahvogw Year of manufacture: 2009 Control: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer support technically sound and fully functional Inspection under power possible by arrangement Service and maintenance reports available large accessory package powered tools from WTO further documentation and images available upon request If interested, please write or call. Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: used, Year of construction: 2003, Technical details: Csdpfxjyzyuds Ahvogw weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Codpfsza D Rfex Ahvjgw Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Spindle bore: 79mm C-axis Number of work stations: 12 Cgodpfxovuqm So Ahvew Videos available!!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 315357, turning diameter over cross slide: 420 mm, turning length: 1,000 mm, turning diameter: 600 mm, spindle speed (max.): 3,200 rpm, controller model: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over cross-slide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main Spindle Speed range: 16 – 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool Turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N Codpfx Aheyxmurjvjgw MACHINE DETAILS CNC control: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Floor space required: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck (Model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Condition: excellent (used), Year of construction: 2007, For sale: CNC LATHE GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, sub-spindle TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all stations driven) - Max spindle speed: 5000 rpm - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter X-axis = 320mm - Max turning length Z-axis = 600mm - High-pressure coolant system - Hydraulic 3-jaw chuck 250mm on the main spindle - Hydraulic 3-jaw chuck 200mm on the sub-spindle - Main spindle through-hole (bore diameter 77mm) - Parts catcher - Chip conveyor Cgedpfx Ahoy Rbz Devjw - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for operation. Stal-Com company has been dealing with the sale, service, and training on DMG group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Every machine can be inspected in operation, as we also provide CNC machining services. After purchasing a machine from us, we offer operator training as well as on-site production setup. We have long-term cooperation with many companies to whom we supply additional machine tools.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment • Tool holders (as shown in pictures) will follow • Tailstock will follow Csdpfx Ahex Stlqovjgw Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, Equipment: bar feeder, chip conveyor, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Maximum power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Rapid traverse (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Rapid traverse (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on hours: 85,620 h Operating hours: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Central lubrication - Hand-held control unit Codpfoy Dr S Hex Ahvogw - Documentation available

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,585 mm, turning diameter: 300 mm, controller model: Siemens 840D Powerline, number of slots in tool magazine: 120, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning length: 1,585 mm Turning diameter: 300 mm Tool magazine capacity: 120 positions MACHINE DETAILS Control: Siemens 840D Powerline EQUIPMENT Sub spindle C-axis Hollow clamping device (diameter 68 mm) on main spindle, left Measuring device with probe Cedsy Dqtiepfx Ahvogw Oil mist separator

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm Cgodpoxa Epbjfx Ahvjw - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Cjdpfx Ahsv Epzvevogw Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Diameter of the bearing in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Cgodpfx Asymmdbohvew Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) Cgedpfx Asin Ub Tshvsw - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Cjdpfx Ahjxf Hlbsvegw Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000