Used Gmx 250 for sale (10,119)

Condition: new, TECHNICAL DATA: - Floor area: 20,000 x 15,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: Chipboard 38 mm P6 untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the stated grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing - Flooring - Fastening materials PRICES: Variant I: Floor area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,711.50 net, plus shipping and VAT. Variant II: Floor area: 50 m² | Dimensions: 5,000 x 10,000 mm | €4,756.00 net, plus shipping and VAT. Variant III: Floor area: 75 m² | Dimensions: 5,000 x 15,000 mm | €6,659.80 net, plus shipping and VAT. Variant IV: Floor area: 100 m² | Dimensions: 5,000 x 20,000 mm | €8,662.00 net, plus shipping and VAT. Variant V: Floor area: 100 m² | Dimensions: 10,000 x 10,000 mm | €8,381.70 net, plus shipping and VAT. Variant VI: Floor area: 150 m² | Dimensions: 10,000 x 15,000 mm | €12,162.50 net, plus shipping and VAT. Variant VII: Floor area: 200 m² | Dimensions: 10,000 x 20,000 mm | €15,136.80 net, plus shipping and VAT. Variant VIII: Floor area: 300 m² | Dimensions: 20,000 x 15,000 mm | €22,782.72 net, plus shipping and VAT. Further variants available Optional accessories: - Handrail - Flush wall connection - Staircase Isdpfjxph A Aex Addjtb - Transfer station - Collision protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM PLANNING & MANUFACTURING This platform system is an example from our standard range. Of course, we design and build your mezzanine platform precisely to your operational requirements – adapted to surface area, load capacity, installation height and intended area of use. Our planning department will provide you with a customized, non-binding quotation based on your specifications. Whether new construction, extension or modernization of existing systems – we support you with comprehensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at an extra charge. Additional costs depend on the delivery location and consignment size and can be requested from us on an individual basis. PAYMENT TERMS Payment terms will be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 16,000 x 20,000 mm [other options available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard, P6 raw/white - Load capacity: 250 kg Itodpfxoxpg R So Addob - Colour: RAL of your choice - Condition: new Scope of delivery: - Supports - Main and secondary beams - Cross bracing - Floor decking - Fastening materials PRICES: Variant I: Base area: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus shipping and VAT Variant II: Base area: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus shipping and VAT Variant III: Base area: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus shipping and VAT Variant IV: Base area: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus shipping and VAT Variant V: Base area: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus shipping and VAT Variant VI: Base area: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus shipping and VAT Variant VII: Base area: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus shipping and VAT Variant VIII: Base area: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus shipping and VAT Variant IX: Base area: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus shipping and VAT Variant X: Base area: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus shipping and VAT Variant XI: Base area: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus shipping and VAT Variant XII: Base area: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus shipping and VAT Variant XIII: Base area: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus shipping and VAT Other configurations available. Optional accessories: - Guardrails - Flush wall connection - Staircase - Transfer station - Impact protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is just an example from our standard product range. We will of course develop and manufacture your warehouse mezzanine precisely according to your operational requirements – tailored to area, load capacity, installation height, and intended application. TRANSPORT & INSTALLATION We are happy to assist with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional charge. The extra costs depend on the delivery location and shipment volume, and can be inquired individually. PAYMENT TERMS Payment terms are to be agreed upon when placing the order. The price is a unit/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ✅ Four advantages – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Optional accessories: - Safety railings - Flush wall connection Iodpfxexmkuio Addetb - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other configurations available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm Itsdpfxexmkk Rs Addob - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Color: RAL color of your choice - Condition: new The mezzanine platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor covering - Fastening materials PRICES: Version I: Base area: 30 m² | Area: 5,000 x 6,000 mm | €3,400.00 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Area: 5,000 x 12,000 mm | €6,008.00 net, plus shipping costs and VAT. Version III: Base area: 60 m² | Area: 10,000 x 6,000 mm | €6,043.20 net, plus shipping costs and VAT. Version IV: Base area: 90 m² | Area: 5,000 x 18,000 mm | €8,512.54 net, plus shipping costs and VAT. Version V: Base area: 120 m² | Area: 5,000 x 24,000 mm | €11,154.85 net, plus shipping costs and VAT. Version VI: Base area: 180 m² | Area: 10,000 x 18,000 mm | €15,343.02 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Area: 10,000 x 24,000 mm | €20,081.60 net, plus shipping costs and VAT. Further configurations available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements—tailored to the area, load capacity, overall height, and intended application. Based on your specifications, our planning department will prepare a customized, non-binding offer. Whether new construction, extension, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at additional cost. Extra charges depend on the delivery location and the size of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms to be arranged in case of order. The price is per unit/net price as stated in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please contact us if you have any questions. ✅ Four times the success – The cornerstones of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, type of input current: three-phase, overall weight: 1,000 kg, input frequency: 50 Hz, nominal power (apparent): 250 kVA, type of output current: three-phase, Equipment: type plate available,

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Itedpfotwdviox Addjb Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Itsdpfowav R Sjx Addob Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Itjdpfx Adjvzqyfodsb Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: ready for operation (used), Technical characteristics Power and Motors Power: 1.5 Kw Overall dimensions Lenght: 560 mm Width: 730 mm Height: 410 mm Isdpfx Adetv Tkysdjtb

Condition: used, The press is extremely stable thanks to its heavy steel construction, which is fully welded. The working surface of the press can be easily raised and lowered to any position by means of a hydraulic actuator. Additional tools are available and your own tools can be adapted. Specification: Tonnage: 250 T Year: 1991 Isdpfxougtv Ij Addotb If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Iedpfevzkylex Addstb Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Iedpfjhktq Ajx Addotb Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection

Condition: used, Year of construction: 1995, functionality: fully functional, We will be selling our finger jointing line at the end of 2025/beginning of 2026, starting from the vacuum destacker (photo 1) up to the finger joint press including the cross-cut saw (photo 11), with only the defect cross-cut saw not for sale. Itedpfx Adsw Uf Tkedob Finger jointing line, model HK 250 L, year 1995 (see photo 7), with upgrades in 2013: control system and finger joint press were replaced. Glue application is performed using the bottom-mixing method with glue rollers (see photo 6). The control system for the entire line and the press was renewed by Somako. Production with this line will continue until the end of 2025, therefore it can be inspected in operation at any time. The price depends on whether the entire line or only parts of it are purchased. Individual components can also be sold as spare parts.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, frame height: 7,500 mm, shelf length: 25,300 mm, support length: 2,700 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, Itjdpfx Aev Uqwdoddob each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: new, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance Isdjwbp Erepfx Addstb – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Swing Diameter: 650 mm Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK Iedpfx Asx N A Dwoddotb

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, controller model: Cybelec DNC 1200, bending force (max.): 250 t, working width: 3,550 mm, distance between stands: 3,000 mm, overall weight: 18,500 kg, TECHNICAL DETAILS Press force: 250 t Bending length: 3,550 mm Distance between uprights: 3,000 mm MACHINE DETAILS Controlled axes: y1, y2, x, r, z1, z2, back gauge tilt Control unit: Cybelec DNC 1200 Dimensions & weight Footprint (L x W x H): approx. 4,300 x 2,750 x 3,750 mm Machine weight: approx. 18,500 kg EQUIPMENT Two-hand foot switch Lasersafe Fisseler Hydraulic tool clamping top and bottom Die shifting Hydraulic crowning Iedpfx Aex I Ebisddotb Support arms 1 set of upper and lower tools Safety guard

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 199479, clamping force: 250 kN, screw diameter: 30 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 270U 250-170 injection moulding machine. Fitted with a Selogica controller. This machine is the four tie bar variant with good size platens for maximum versatility from a small clamp machine. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Itodpox U Ax Eofx Addjb Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Please note that the video shown is of a near identical machine previously refurbished by STV Machinery. It’s a good example of what can be expected once this machine is fully refurbished by our team.

Condition: refurbished (used), operating hours: 22,000 h, In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free with a 3 month (parts only) warranty. Ijdpfel Tnz Ejx Addjtb Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we'll do the rest.

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Isdpovvn Icofx Addetb

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM Iodpfxjp T Ulzs Addstb SPINDLE NOSE A2-8 SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,950 mm, total length: 6,000 mm, total width: 3,800 mm, table width: 900 mm, table length: 3,100 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, overall weight: 25,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, X-axis travel: 2500 mm Y-axis travel: 920 mm Z-axis travel: 820 mm Table size: 3100 x 900 mm Spindle nose: SK/ISO40 Spindle speeds: 20 - 18.000 rpm Toolchanger: 30 pockets Controller: Heidenhain iTNC 530 Itsdpfx Adjyac Tlsdeb Featured with: - Chipconveyor - Cooling through spindle 40 Bar - ISO40 tools - Machine manuals Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm Machine weight: 25.000 kg

Condition: used, maximum load weight: 30,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2011, next inspection (TÜV): 11/2026, loading space length: 13,450 mm, loading space width: 2,500 mm, loading space height: 2,660 mm, total width: 2,600 mm, Year of construction: 2011, Information in English: 3-axle HEIWO refrigerated semi-trailer 1340 x 250 x 265 cm | Carrier Maxima | Lifting axle | Steering axle | Excellent condition Body: Refrigerated/freezer insulated, suitable for flowers, plants, vegetables, fruit, foodstuffs Chassis manufacturer: H.T.F. Body manufacturer: HEIWO Cooling unit: Carrier Maxima 1300 (diesel and electric) Reefer hours: 1,216 hours Tail lift: Not fitted, but prepped for easy installation Isdpfx Adjyamkzedstb First registration: 19-07-2011 Technical inspection valid until: 20-11-2026 Internal dimensions (LxWxH): 1340 x 250 x 265 cm Unladen weight: 8,640 kg (without cooling unit) Payload: 30,360 kg GVW: 39,000 kg Suspension: Air suspension Axle configuration: 3 axles Axle brand: SAF axles with disc brakes Steering axle: Yes, 3rd axle mechanically steered (Tridec) Lifting axle: Yes, 1st axle Tyre size: 385/55 R22.5 Rear axle 1: left outer profile: 60%, right outer profile: 60% Rear axle 2: left outer profile: 80%, right outer profile: 80% Rear axle 3: left outer profile: 50%, right outer profile: 80% Extras: Carrier Maxima 1300 (diesel and electric), 3rd axle is mechanically steered (Tridec), 1st axle is a lifting axle, SAF axles with disc brakes, chassis is galvanized and completely rust-free, fully insulated cargo box, central lubrication system, aluminum floor, 3x ceiling rails, 1x horizontal load securing rail, stainless steel kick-plates in box, LED interior lighting, completely new rear bumper with new lighting, rims are 1 year old, very good tires all round, immediately available and ready for use with no extra costs. EXEMPLARY SEMI-TRAILER - IMMEDIATELY AVAILABLE AND READY FOR USE Refrigeration unit: Carrier Further specifications: - Kerb weight: 8,640 kg - Tyre size | First axle: 385/55 R22.5 - Tyre tread depth inner left | First axle: 60% - Tyre tread depth inner right | First axle: 60% - Max axle load | First axle: 9,000 kg - Tyre size | Second axle: 385/55 R22.5 - Tyre size | Third axle: 385/55 R22.5 - Tyre tread depth inner left | Second axle: 80% - Tyre tread depth inner left | Third axle: 80% - Tyre tread depth inner right | Second axle: 80% - Tyre tread depth inner right | Third axle: 50% - Max axle load | Second axle: 9,000 kg - Max axle load | Third axle: 9,000 kg - Price on request: Yes - Position | First axle: Rear - Brake type | First axle: Disc brakes - Suspension | First axle: Air suspension - Lifting axle | First axle: Yes - Position | Second axle: Rear - Position | Third axle: Rear - Brake type | Second axle: Disc brakes - Brake type | Third axle: Disc brakes - Suspension | Second axle: Air suspension - Suspension | Third axle: Air suspension Additional features: - Rear doors - Central lubrication - Steering axle - Lifting axle - Stainless steel side kick-plates - Aluminum floor - LED interior lighting - Rims 1 year old - Very good tires all round Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance regarding costs and procedures for your country. Location | Maasdijk (NL) – 140 km from the border, 20 km from Rotterdam The Hague Airport Disclaimer: Specifications subject to change, prior sale and errors excepted.

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 1114.3705-24, Used CNC Lathe Make: Boehringer Type: VDF 250Cm Year of Manufacture: 1997 VDF Boehringer 250C The machine has the following features: 1000mm turning length No tailstock Driven tools Special indexing chuck Siemens 840C control system The Boehringer VDF 250Cm is a CNC lathe designed for machining chucked parts. It is characterized by its robust construction and precise machining capabilities. Technical Specifications (Model Year 1997) Working Area: Swing over Bed: 550 mm Swing over Cross Slide: 480 mm X-Axis Travel: 405 mm Z-Axis Travel: 1,099 mm Maximum Turning Length: 1,000 mm (None) Tailstock: Tool Turret: Number of Positions: 12 Tool Holder: VDI 50 DIN 69880 Live Tools: YES Spindle: Spindle Head Size: 8 DIN 55026 Spindle Bore: 103 mm Max. Chuck Diameter: 315 mm Max. Drive Power (50% Duty Cycle): 53 kW Max. Torque: 780 Nm Speed Range: 30–3,000 rpm Feeds: Automatic Feeds: 1–10,000 mm/min Rapid traverse speed: 10 m/min (X and Z axes) Max. feed force: 15 kN Dimensions and weight: Machine dimensions (L × W × H): approx. 5,400 × 3,200 × 2,400 mm Machine weight: approx. 11,000 kg Equipment: Pivoting control panel Hydraulic system from HYDROKRAFT Coolant system with 600 l tank, max. pump pressure 5.5 bar, flow rate 60 l/min, pump power 1.1 kW Chip conveyor with 325 l tank capacity, right-hand discharge 3-jaw power chuck Oil mist extraction Control cabinet with cooling unit and temperature controller from RITTAL Control system: SIEMENS SINUMERIK 840 C Variants and Differences There are various variants of the VDF 250 series, such as the VDF 250 CU, which can be equipped with different control systems (e.g., PHILIPS B2T) and technical specifications. Some models feature driven tools and a tailstock, while others are designed as pure chuck-type lathes without a tailstock. Conclusion Itodpfx Aswlap Aoddsb The Boehringer VDF 250 Cm is a versatile CNC lathe characterized by its stability and precision. With its robust construction and extensive features, it is ideally suited for machining chucked parts in a variety of production environments.

Condition: new, Year of construction: 2025, capacity Ø 140 - 250 mm sawing motor 30 kW hydraulic motor 5,5 kW Saw Feeding Servo 3 KW Siemens Material Feeding Motor 3 KW Siemens Saw speed 30-80 rpm /min Isdpjt Hytbefx Addstb saw-blade dia. Ø750 x 3,8 x 3,2 x 80 mm cutting range min. 1000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 3500 x 8000 mm Saw speed 30-80 rpm / U pro min weight of the machine ca. 9000 kg GERD WOLFF GLS-250 High-performance circular Saw From 10 to 250 Millimeters round material, within seconds, they cut steal ofall kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.