Used Grinder for sale (1,345)

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h Godsv Srguspfx Aadsin • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Godjx Hgvljpfx Aadein Width: 1820 mm Depth: 1540 mm Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Accessories: Coolant system Magnet chuck mounted on the table (650 × 250 mm)

Condition: used, Year of construction: 1999, Grinding wheel diameter: max. 100 mm Speed: 3,500–7,500 rpm Power supply: 400 V, 50 Hz, 5 A Power input: 1.5 kW Fuse: 16 A Control voltage: 230 V Operating voltage: 3 x 400 V / 230 V Frequency: 50 Hz Total electrical power: approx. 1.5 kW Upper and lower grinding spindle Power: 1.1 kW at 2,800 rpm Grinding spindle speed: Upper grinding spindle: 5,800 rpm Lower grinding spindle: 5,800 rpm Speed control: 50% – 130%, approx. 3,000 – 8,000 rpm Grinding spindle rotation direction: right Max. grinding wheel diameter (upper): 100 mm Max. grinding wheel diameter (lower): 100 mm Clamping and travel ranges: Indexing head with taper holder: SK40 Grinding slide stroke: 190 mm Max. cutter length from face of indexing head at 6° clamping angle: 145 mm Max. cutter length from face of indexing head at 15° clamping angle: 165 mm Max. cutter length from face of indexing head without presetting: 210 mm Max. cutter diameter: 63 mm Cross adjustment: 100 mm Vertical adjustment: 325 mm Motorized adjustment via push button Giedpfoyfpdbox Aaden Manual adjustment via handwheel Longitudinal adjustment of lower grinding spindle: 5 mm Rotational movement of indexing head carrier: 0–3° Swivel movement of indexing head clamping and clearance angle: 63° Axial adjustment of indexing head: 100 mm Cut-off spindle: 360 mm Including HITACHI profile projector and various collets in different sizes and holders Technical data: Weight: approx. 600 kg Dimensions (L x W x H): approx. 880 x 680 x 1800 mm

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm Giodpfewq Ea Rox Aaden - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Location: ex stock 54634 Bitburg - available immediately -

Condition: ready for operation (used), Grinder, Shredder, Moditec G2 ACPS, Used machine Manufacturer : Moditec Type : G2 SACP Gijdpfx Aasyh H Imsden Overall dimensions : 1400 x 485 x 1500 mm Weight : 340 kg Year : 1995 Electrical data : 400 V ; 1.8 kW Feeding hopper : 420 x 340 mm

Condition: ready for operation (used), Grinder, shredder, Moditec G3S ACP, used machine Gisdsyh D E Nepfx Aaden Manufacturer: Moditec Type: G3S ACP Overall dimensions: 1400 x 480 x 1560 mm Weight: 330 kg Year: 2003 Electrical data: 400 V; 2.2 kW Hopper size: 500 x 350 mm

Condition: ready for operation (used), Grinder, shredder, Moditec G3S ACP, used machine Godpfjyh D Eijx Aadjin Manufacturer: Moditec Type: G3S ACP Overall dimensions: 1400 x 480 x 1560 mm Weight: 330 kg Year: 2003 Electrical data: 400 V; 2.2 kW Hopper size: 500 x 350 mm

Condition: excellent (used), Jung JF 625 surface grinder in very good condition. The machine enables precise surface machining. Sturdy construction and reliable operation. Ideal for workshops of all sizes. Safe loading on our side. Gjdpfx Ajya Izzoadjin Short video showing the machine in operation: ?si=JufmHYi6Q27ELJXR Technical data: Grinding width: 250 mm Grinding length: 600 mm Magnetic table: 250x600 mm Max. table to spindle height: 500 mm Grinding wheel size: 300x30x76.2 mm Machine weight: 2500 kg

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Sale only within Germany Control System: Siemens Sinumerik Software: Haas Software 7.3 Number of Axes: 6 (X, X3, Y, Z, C, A) Grinding Spindle: - Continuously variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece Spindle: - Up to 1,000 rpm - Centre height 175 mm - Clamping collet 3409 - Taper mount SK50 - Through bore Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 arcseconds - Input increment 0.001° Workpiece Support: Linear axis X3 with bushing holder Feed Drives: - Linear axes with ball screw spindles - Direct length measurement with 0.0001 mm resolution Workpiece Dimensions (Drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Max. workpiece weight 2.5 kg Chain Magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Max. workpiece weight 1.5 kg Stack Magazine: - Preparation for stack magazine for indexable inserts Measuring System CCD Area Camera: - Indexing and positioning of tools by coolant channel (from Ø0.8 mm) - Measurement of opening angle - Indexing of multi-groove drilling and reaming tools Renishaw Probe: - Touch-off for workpiece length/tool tip - Scanning of groove pitch - Positioning in coolant channel bore at tool tip Electrical Connection: - 63A main fuse - Mains voltage 400V - Frequency 50 Hz - Control voltage 24V - Rated power 21 kW Weight: 8 t Including: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft und Bauer extinguishing system - Extraction unit: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Pressure plate ----- Operating Procedure – For Drills: - Manual loading of chain magazine outside machine enclosure - Automated workpiece handling system - Automatic collet chuck clamping - Workpiece positioning in the working area - Workpiece machining - Automatic return of workpieces onto powered conveyor belt Gisdpfx Aaswpqkredon Operating Procedure – For Solid Carbide Indexable Inserts: - Manual loading of stack magazine inside working area - Automated workpiece handling system - Automatic clamping with special clamping fixture - Workpiece positioning in the working area - Workpiece machining - Automatic return of processed workpieces onto storage system Drill Grinding: - Grinding of flute profile - Grinding of cutting edge - Grinding of circumference profile - Grinding of relief chamfer - Grinding of periphery chamfer - Cylindrical grinding Indexable Insert Grinding: - Grinding of support face and pin ----- Two additional identical machines are also available for sale!

Condition: ready for operation (used), Year of construction: 2004, operating hours: 78,000 h, functionality: fully functional, machine/vehicle number: 216028, Sale only within Germany Gjdpfxsx Hwyho Aadjin CNC Grinding Center UW I D With 5 controlled axes: X, Y, Z, A, B And fully automatic grinding wheel changer Control system: NUM 1050 M with PC Center height: 195 mm Max. tool diameter: 250 mm Grinding table X-axis Longitudinal travel: 625 mm Usable table area: 900 mm x 185 mm Cross slide Z-axis Cross travel: 305 mm Vertical slide Y-axis Vertical stroke: 305 mm Grinding head B-axis Swivels 240° Grinding wheel mount: HSK-C50 Spindle speed: 2,000 – 23,000 rpm Workpiece carrier A-axis Mount: ISO 50 Max. speed: 600 rpm A, X, Y, Z axes with direct measurement system B-axis with indirect measurement system Renishaw 3D measuring probe permanently mounted on grinding head Grinding wheel changer with 8 stations incl. 4 additional coolant nozzles Additional CNC-controlled slide unit (W-axis) Longitudinal travel: 380 mm Hydraulic vertical stroke: 40 mm Mounted on the grinding table For use with steady rest or tailstock 78,000 spindle hours 105,000 power-on hours Includes Kraft+Bauer fire extinguishing system Note: Another identical machine is also available for sale.

Condition: good (used), Metabo belt sander UR 33/2S, 400 Volt, 2800 rpm Gisdpfx Aajx Rt D Redsn

Condition: good (used), pneumatic angle grinder, Flex, grinding wheel, cut-off grinder, cut-off grinding machine, angle grinder -Max. discs: Ø 178 mm -Speed: max. 8500 rpm Giodpob A Intjfx Aaden -Number: 74 angle grinders available Price: per piece -Weight: 4 kg/piece

Year of construction: 1986, condition: excellent (used), I sell Profile Grinding Machine Reckmann LM 161. Grinder in very good condition, little used. Godpfx Aeuyg Rnoadsin

Year of construction: 2022, condition: as good as new (ex-display), Can be attached to wheel loaders and various implement carriers as well as McConnel Robocut or other tracked mowers Standard with hydraulic swivelling device via 2 heavy hydraulic cylinders (constant speed in both directions) Controlled via remote control of the carrier vehicle Gijdpfx Aokvnaweadjn HEAVY-DUTY piston motor with freewheel and pressure relief valve for safe milling at the load limit Hydraulic motor optimally matched to the milling unit Large swivel range enables wide-ranging work without awkward manoeuvring Flexible working even in areas difficult to access HARDOX milling wheel ergonomically shaped for a large cutting depth Maintenance-friendly design Hydraulic hoses as standard Hydraulic requirements: 1x supply line, 1x pressure-free return line, 1x pressure-free leakage oil line to tank

Condition: used, functionality: fully functional, machine/vehicle number: 18783, We offer a double bench grinder, which is still in good condition. - With base frame Gjdpfx Ajx A A H Njadjin - Electric motor 220V / 50Hz - P1 1100W, P2 800W, 3000 rpm If you have any further questions or are interested, we are at your disposal.

Condition: new, Year of construction: 2026, OSTERBERGER KSBP 2500 Universal Brand new combined universal long-belt sander - brushing machine - polishing machine in portal construction. Sanding length and width can be customized according to customer requirements, also available with two sanding belts in parallel for two workstations, allowing for pre-sanding and finishing without changing the belt, as well as a brush and polishing head with automatic longitudinal adjustment to the left and right. The machine is suitable for coarse and fine sanding, structuring (brushing), polishing, and high-gloss polishing of a wide variety of surfaces including painted workpieces, natural workpieces, and various metal sheets made of stainless steel, aluminum, brass, copper, bronze, and various plastics. Combined long-belt sanding machine with brushing and polishing unit for workpieces up to 650 mm in height: - Motorized movement of the brushing and polishing unit from left to right and back - Manual movement of the support table forwards and backwards - Motorized adjustment of the support table up and down Worktable size: 2,500 x 1,000 mm (other sizes available upon request) Sanding belt dimensions: 8,200 mm x 150 mm Drive power of brushing and polishing unit: 3 kW Gijdpfxoyhzkpe Aadjn Drive power of sanding belt unit: 3 kW Dimensions approx. 4,200 x 1,600 x H 2,100 mm Weight approx. 1,000 kg

Condition: excellent (used), Year of construction: 1988, TECHNICAL DATA. Gisdswwkacopfx Aadsn Max. clamping length: 90 mm Tool clamping height with tapered shank: 50 mm Tool clamping height with straight shank: 45 mm Max. helix angle: 45° Number of clamping positions: 1 to 99 Max. slide travel: 550 mm Max. grinding wheel diameter: 350 mm Min. grinding wheel diameter: 150 mm Grinding wheel speed (variable): up to 2700 rpm Swivel range of grinding spindle axis: 0° to 15° Grinding slide feed rate (variable): 0.05 to 16 mm/min (with 3rd and 4th axis: 0.05 to 8 mm/min) Workpiece spindle taper: ISO Taper No. 40 Grinding Wheel Data CBN and diamond cup grinding wheel: Ø200 mm → Min. DFF: 66 (3rd axis), 76 (4th axis) Ø250 mm → Min. DFF: 16 (3rd axis), 26 (4th axis) CBN-ES cone grinding wheel: Ø200 mm → Min. DFF: 50 (3rd axis), 60 (4th axis) Ø250 mm → Min. DFF: 0 (3rd axis), 10 (4th axis)

Condition: excellent (used), Catalogue number 7733 Gisdpfx Aaeya Hm Nsdsn TECHNICAL DATA - Belt width: 150mm - Oscillation - Vertical oscillation movement - 2 rotation speeds - Work table: 1180x370mm - Work table adjustment: up/down, front/back and at an angle - Motor: 3kW - Platen - for precise grinding - With fan - Effective sanding length on belt: 700mm - Top/bottom milling cutters for edge chamfering - Extraction port diameter: 70mm - Dimensions (L/W/H): 1550/1400/1300mm - Weight: 490kg ADVANTAGES – with oscillation – with platen – with fan – includes milling cutters for edge processing/chamfering – for both curvilinear and straight sanding – unpainted – used machine, in very good condition Net price: 7500 PLN Net price: 1780 EUR (based on exchange rate 4.2 EUR) (Prices may vary with greater rate fluctuations)

Year of construction: 1964, condition: used, grinding length 160 x 400 mm Gisdpfx Asx Ik Uujaden mechanical ja weight of the machine ca. 0,5 t

Condition: used, Year of construction: 1992, total height: 2,000 mm, total length: 2,800 mm, total width: 2,100 mm, Empty weight: 4.000 kg Price: On request - Year: 1992 - Documentation available: No - CE certificate present: No - Serial number: 4100027 - Drive system: Conventional Giedpfx Aaex E U E Eeden - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 460 - Z-axis travel [mm]: 500 - Table width [mm]: 1000 - Table depth [mm]: 400 - Magnet width [mm]: 1010 - Magnet depth [mm]: 410 - Max. grinding wheel diameter [mm]: 355 - Max. grinding wheel thickness [mm]: 100 - Options: External cooling, Filter system, Digital readout - Transport dimensions: 2800mm x 2100mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, STUDER S 40-2 is a Cylindrical grinder designed for precision, high accuracy and reliability. Working capacities: centre height 175 mm, distance between centres 650 mm, max longitudinal travel 700 mm; wheels Ø400 mm (width 80/40 mm) bore 127 mm; workpiece max 130 kg; hydraulic cross travel 300 mm; wheelhead swivel 180°; table angle 12°. Main specs: wheel speeds 6 steps 1500–2400 t/min (35 m/s); work spindle stepless 60–600 t/min, rotatable 0–90°; wheel motor 3 kW, work spindle motor 1 kW; 3×400 V 50 Hz; total 13 kVA; weight ≈3100 kg; dims 2150×2000×1800 mm. Accessories: 2‑axis DRO, internal grinding attachment, magnetic chuck Ø150 mm, paper filtration, flanges, lamp, balancing arbor, safety device. Achieves tight tolerances; suited to automotive, aerospace, tooling and medical sectors Gedpfx Aajx S N D Aedjin

Condition: used, Year of construction: 2004, functionality: fully functional, Dismantling and loading by the seller. Transport by the buyer. Sale only within the EU. Gisdpfx Aoydaqisadon

Condition: used, Year of construction: 2003, max. grinding diameter 5-50 mm grinding length 350 mm workpiece length 50-300 mm diameter 5-50 mm current capacity 70 kVA weight of the machine ca. 9 t dimensions of the machine ca. 3300x2950x2400 m Power supply: 400 V/50 Hz Power: 70 kVA Fuse protection: 3X125A Conductor cross-section: 5X25 mm² Cu Workpiece diameter: ? 5-? 50 Workpiece length: 50-300 - Manual loading and unloading - External fully automatic loading device - Workpiece spindle stock fixed on grinding table Workpiece spindle unit: Dimensions: ? 135 x 400 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Drive: with HF motor Special mount: Junker standard collar ?75 mm Max. speed: 6000 min. -1 Tailstock: Longitudinal adjustment: manual Turning center: Junker standard collar ? 48 mm (?75 mm) Grinding table: Feed: Z-axis Grinding headstock: Feed: X-axis Horizontal swivel: B-axis HF grinding spindle unit I, II, III Dimensions: ? 165 x 350 mm Flange: ? 190 mm Standard collar: ? 127 mm Lubrication: Permanent grease lubrication Bearing seal: With sealing air Gsdsyan R Nopfx Aadsin Drive: 8 kW Balancing: Electronic Speed max. 8800 min -1 Grinding wheel I, II, III Type: Borazine (CBN) ceramic bonded Diameter: ? 350 mm Bore: ? 127 mm Coating width: max. 5 mm (standard) Peripheral speed: max. 140 m/s

Condition: excellent (used), Knife grinder REFORM with tilting magnet mm 3.200x150 Gjdeyhai Tepfx Aadoin

Condition: excellent (used), Automatic circular knife grinder Göckel model RB2 Gedpsx Hp Rrofx Aadsin