Used Heidelberg Speedmaster for sale (281)

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 551198, paper width (min.): 400 mm, paper width (max.): 720 mm, paper height (min.): 480 mm, paper height (max.): 1,020 mm, Equipment: documentation/manual, ▪ Preset Plus feeder, ultrasonic + side-lay double-sheet detection ▪ AutoPlate Pro automatic plate changing ▪ Sheetfed Control (CAN-Bus), decentralised drive control ▪ Automatic blanket washing + Tandem Wash-up ▪ Prinect Press Center console, remote inking, Wallscreen ▪ Alcolor dampening, Alcolor Vario, IPA kit ▪ Sheet travel monitoring sensors ▪ CombiStar CANopen (temperature, alcohol, pH) ▪ Inpress Control ×2 with inline register correction ▪ Preset Plus delivery, direct-drive suction-belt sheet brake ▪ Remote-controlled oscillating rollers Fpodpfxo Ahqlco Aanjp ▪ PowerStar AP 500 Duo + CleanStar Compact ▪ StaticStar Compact antistatic ▪ AirStar Pro, ScrollStar compressor, UPS

Condition: used, Year of construction: 2010, 530 x 740 mm (20×29″) approx. 176 million prints Fedsp Ugwtspfx Aanjpp PressCenter AxisControl Alcolor Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 antistatic device scale feeder powder device, available at short-notice

Condition: good (used), Year of construction: 2000, functionality: fully functional, Heidelberg Speedmaster SM 74-5 P 2 3 – Year of manufacture: 2000 – CP2000 5-color sheetfed offset printing press – fully functional For sale: a Heidelberg Speedmaster SM 74-5 from the year 2000. Fpsdpfx Aas Ai Ei Rsnjp Machine data * Manufacturer: Heidelberger Druckmaschinen AG * Model: Speedmaster SM 74-5 P2 3 * Year of manufacture: 2000 * CP2000 * Autoplate * Water cooling * Number of printing units: 5 * Control system: CP2000 * Print counter: approx. 95 million impressions * Condition: fully functional * Origin: Made in Germany Technical specifications * Maximum sheet format: approx. 520 × 740 mm * Minimum sheet format: approx. 210 × 280 mm * Maximum printing speed: up to 15,000 sheets/hour, depending on model and print job * Material thickness: typically approx. 0.04–0.60 mm

Condition: used, Year of construction: 2004, offer consists of: 6-buckle folder Heidelberg Stahlfolder BUH-56/6/4 Fodpfo Ai Sdpjx Aanepp stream delivery 6 buckles 2 knifes + 1 buckle 1 knife Equipment: - flat pile feeder - weight: 2.267kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), machine/vehicle number: CUTSTAR74/274, type of input current: three-phase, input voltage: 400 V, For sale: Heidelberg CutStar XL 75, an industrial roll-to-sheet feeding and cutting system designed for integration with Heidelberg Speedmaster XL 75 sheetfed offset printing presses. The CutStar system enables printing materials to be fed directly from rolls, automatically cut into individual sheets, and transferred to the printing press. Fpedjz Ny A Hspfx Aanop This solution allows printing companies to use roll-fed materials in sheetfed offset production, helping to optimize material costs and improve production efficiency. The system is offered together with a Corona Plasma Plus surface treatment unit. Technical Specifications * Manufacturer: Heidelberg / Bielomatik Leuze GmbH + Co. KG * Model: CutStar XL 75 * Machine type: Roll-to-sheet feeder and cutter * Year of manufacture: 2011 * Serial number: CUTSTAR74/274 * Power supply: 3 × 400 V * Frequency: 50 Hz * Rated current: 52 A * Connected load: 40 kVA * Supply fuse protection: 100 A * Control voltage: AC 230 V / DC 24 V Included Equipment * Heidelberg CutStar XL 75 roll-to-sheet feeding and cutting system * Corona Plasma Plus surface treatment unit * Electrical control cabinets * Associated components and accessories shown in the photographs Operating History and Condition The system was previously installed on a Heidelberg Speedmaster XL 75 printing press with over 200 million impressions. The equipment was fully operational and in very good technical condition before dismantling. The entire system was professionally dismantled by Heidelberg Polska technicians, ensuring proper disassembly and preparation for transportation. The equipment is currently dismantled, secured, and stored in our warehouse on transport pallets. Due to its dismantled condition, a live operational demonstration is not currently possible. Additional photographs and technical information can be provided upon request.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. Fodpez It Sksfx Aanjpp A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: good (used), Year of construction: 1998, functionality: fully functional, Manufacturer: Heidelberg Model: Speedmaster 102-8-P Year of manufacture: 1998 Prints: 359 million Equipment: - CP Tronic control console - CPC 1-04 color control system - Alcolor dampening system - Autoplate plate changing system Additional features: - Automatic blanket washing system - Autoregister - Electronic double sheet detection - Electronic side guide control - High-pile delivery - Sheet de-curler - Anti-static system Fpodezd R Hgopfx Aansp - Steel sheets in the feeder and delivery - Super Blue configuration - Technotrans cooling and circulation system - Weko powder spraying device Maximum format: 720 × 1,020 mm Machine type: Sheetfed offset printing press Machine model: 8-color perfecting press

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,860 mm, total width: 1,850 mm, Two-color offset printing press Fpodpezwhbbofx Aanop Heidelberg Speedmaster 52-2 Year of manufacture: 1998 Number of impressions: 63 million Equipment: Heidelberg CPTronic Heidelberg suction head with lifting/dragging suction grippers Heidelberg Autoplate with Heidelberg register system Alcolor dampening system Numbering and embossing unit Interface adapter for connecting external devices Largest sheet size: 37 x 52 cm Smallest sheet size: 10.50 x 14.50 cm Max. printing area: 36 x 52 cm Max. printing speed: 15,000 sheets/hour

Condition: used, Year of construction: 2015, color channels: 5 (Weiß und Clear/Transparent), counter reading (black): 1,325,420, counter reading (color): 2,950,007, Equipment: raster image processor, We are offering this used Heidelberg / Ricoh Pro C7100X, manufactured in 2015. Fedpfxe Aiiy Hj Aanjpp Manufacturer: Heidelberg / Ricoh Model: Linoprint Pro C7100X Year of manufacture: 2015 Condition: Used Includes a 5th color and additional colors, white and clear (transparent). As can be seen in the pictures, it includes Fiery, a large-capacity feeder, a stack output, etc., EFI Color Profiler, etc. It can be inspected at any time. It is covered by a maintenance contract. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 540029, Heidelberg Speedmaster 70 x 100 cm Fodpfjzd R Hyox Aanspp - 4 colors - Format: 70 x 100 cm - Approximately 400 million impressions - Serial number: 540029 - CP Tronic - CPC 1.04 - Alcolor dampening system - Autoplate - Preset - Cocking - Fully automatic washing systems - 2/2 reversal (perfector) - Decurler - Powder spray unit

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 626963, Heidelberg - SM 74-2 H Number of copies produced 74.077.397 Year of Production -2003 Max-Sheet Size 530 × 740 mm (20.87 × 29.13 in) -- 2/0—1/1 Max.printing Speed 13000 /h CP 2000 Center, AutoPlate system, Dampening rollers Alcolor Automatic Wash rollers and Cylinder Fjdpfx Aasz Nz S Asnspp Ink Fountain-Ink zone motor Electric equipment- 50Hz 380 V Pull Lay control-Electronic Powder spray-Alphathronic 200 Circulation and cooling ---Dampening Baldwin Device Available immediately

Condition: excellent (used), Year of construction: 2014, Heidelberg XL75-4+LX Anicolor, ref. 3023 Year 2014 IR + hot air drying Extended delivery length: 160 cm 185 million impressions Maximum sheet size: 607 x 750 mm Non-Stop feeder Non-Stop delivery In very good condition!!!! Fodpfxjzrp Thj Aanjpp

Condition: used, Year of construction: 2008, machine/vehicle number: FJ.DKSA-000171, Submitting a bid obligates you to collect the item by December 23, 2026! TECHNICAL DETAILS Vertical feeders: 5 Horizontal feeders: 2 Saddle stitching station Fodpfxj Agvrke Aanjpp Loop stitch heads: 4 Flat stitch heads: 4 Trimming Trimming: 3-sided Separator: Present Serial number 1: FJ.DKA0-000209 Serial number 2: FJ.4931200/01C Serial number 3: GSA-0648 Serial number 4: GSA-0642 Serial number 5: GSA-0644 Serial number 6: GSA-0643 Serial number 7: GSA-06639 Serial number 8: FJ.4933200/01C Serial number 9: GSA-0411 Serial number 10: GSA-0412 Serial number 11: FJ.DKAH+000170 Serial number 12: FJ.4910800/03A Serial number 13: GSA-0208 Serial number 14: FJ.DKAB000209 Serial number 15: FJ.DKSA EQUIPMENT 5 Heidelberg vertical feeders 2 Heidelberg horizontal feeders Heidelberg CHU 450 turn-over feeder Heidelberg KUS 400 thickness control unit / length measuring device Heidelberg saddle stitching station with loop stitch and flat stitch heads Heidelberg TR 450 overflow table Heidelberg ST 450 trimmer for 3-sided trimming with separator Heidelberg CHA cross feeder Note: Accessories are offered without warranty. The principle applies: “Item sold as is.” The prospective buyer must verify the completeness of the item on-site.

Condition: excellent (used), Year of construction: 2008, operating hours: 123 h, Varnishing tower (chambered coater system) Axis control CP2000 control center with remote control for color zones, color ducts, as well as circumferential, side, and diagonal registration with job memory card and touch screen Alcolor film dampening system with circulation and cooling Ink temperature control Autoplate automatic plate changing system Automatic ink roller cleaning system Automatic blanket and impression cylinder cleaning system Powder sprayer IR dryer Extended extended delivery Fodpozlqdujfx Aanspp Standard accessories

Condition: used, Year of construction: 2015, functionality: fully functional, Heidelberg SBD | 64x90cm ・Fully Refurbished 2015 ・Very Good Used CMI Cylinder ・2 Foil Rewind ・4 Zone Heated Aluminium Drop-In Plate ・Automatic Impression ・Touchpad Operation System ・Excellent Used Machine Fsdpfxsyzgl Ae Aanspp *Very clean, well maintained and serviced* LOCATED IN THE UK | AVAILABLE IMMEDIATELY

Condition: excellent (used), Year of construction: 2016, Ref: 11070 . 2016 ‘Heidelberg’ Stahl TH82/644-PFH Folding Machine High performance all buckle folding machine with auto setting (no sound hoods). Comprising: • PFH82 pallet loading pile feeder designed for medium to high run lengths with low operator strain, laser guided positioning of the stack, double wheel suction head for wide format sheets. Max. pile height 1.2 metres. • Digital microprocessor control with self-learning function for signature length & spacing with run monitoring, total and batch counter with memory. • Touchscreen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. Fedpfx Ajyk H H Rjanepp • Setting adjustments can be made outside the machine ‘on the fly’. • VSA 56 vertical stacking delivery. Including compressor, tools, spares & manuals. Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 52cm with 4 plates, perforating/scoring shafts Gate fold attachment Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 000163, color channels: CMYK, paper weight (min.): 45 g/m², paper weight (max.): 80 g/m², total length: 16,000 mm, total width: 3,500 mm, total height: 4,500 mm, space requirement length: 20,000 mm, space requirement width: 6,000 mm, space requirement height: 6,000 mm, year of last overhaul: 2020, type of input current: three-phase, input voltage: 380 V, cutting length (max.): 630 mm, section length (max.): 1,000 mm, Equipment: documentation/manual, kitap,jurnal,gazet çap enjam.Sagatda nominal25000 şertli önüm.(maksimal 35000 çenli)tizlik.wertikal gurnama çap guraly 4+4CMYK. Jf35 epleýjili,63sm kesiji,üç görnüş epleýiş,doly işjeñ ýagdaýda.Rulon oturtma iki rulonly.4+4 CMYK Fpsdpfxjz A Uz Ae Aansp

Condition: excellent (used), Year of construction: 1998, operating hours: 61,000,000 h, functionality: fully functional, machine/vehicle number: 201810, color channels: 2, paper weight (min.): 50 g/m², paper weight (max.): 280 g/m², paper width (min.): 520 mm, total length: 290 mm, total width: 190 mm, total height: 170 mm, space requirement width: 300 mm, space requirement height: 220 mm, counter reading (black): 61,000,000, counter reading (color): 61,000,000, year of last overhaul: 2025, type of input current: three-phase, input voltage: 380 V, Equipment: documentation/manual, Heidelberg Speedmaster SM 52-2-P offset printing press for sale, manufactured in 1998, currently in daily production and available for inspection and live demonstration. Configuration * 2 printing units + perfecting device (1/1 or 2/0) * Maximum sheet size: 370 × 520 mm * Total impressions: 60,956,393 * AutoPlate semi-automatic plate changing system * Heidelberg Alcolor dampening system * Technotrans refrigeration unit for the dampening solution * Continuous feeder * Electronic side lays * CP Tronic control console * Automatic ink key presetting from the CP Tronic console * FullWash automatic washing system for the plate cylinders and ink rollers (blanket washing unit not installed) * Replaced cylinders Technical Condition * The press is currently in daily production and can be inspected while running. * Original Heidelberg ink and dampening rollers were replaced approximately 2 years ago (invoice available). * The machine runs perfectly and produces commercial print jobs every day. * Sold complete with a Plate Punch & Bender. Automatic Washing Systems Fsdpfx Aaezrr U Uonopp The press is equipped with automatic washing systems for: * Impression and transfer cylinders; * Ink rollers. The blanket washing units are not installed. Documentation * Original purchase invoice available. * Original Heidelberg manuals and tools. * Original electrical diagrams. Terms of Sale * VAT invoice will be issued. * Dismantling, loading and transportation are the buyer’s responsibility. Ideal for Printing * Flyers * Brochures * Business cards * Folders * Forms * Labels * Commercial print jobs * High-quality promotional materials This press is an excellent choice for print shops looking for a reliable Heidelberg offset press with low operating and maintenance costs. Price €17,500 (VAT included).

Condition: ready for operation (used), Year of construction: 1985, operating hours: 88 h, Heidelberg Speedmaster 102 FPP - 1985 year model - 88 millions impression Technical Specifications Color Capacity: 5 colors. Fjdpfx Ajyarbleanjpp Perfecting Configuration: The "PP" designation indicates a double-perfecting capability, typically allowing for 5/0, 1/4, or 2/3 printing configurations (printing on both sides of the sheet in a single pass). Maximum Sheet Size: 720 x 1,020 mm (approx. 28 x 40 inches). Minimum Sheet Size: 280 x 420 mm (straight printing) or 400 x 420 mm (perfecting). Production Speed: Up to 13,000 sheets per hour. Alcolor Dampening: A continuous film dampening system for consistent ink-water balance. CPC 1.02: The Control Press Center for remote ink and register control. High Pile Delivery: Standard for high-volume commercial production. Powder sprayer Weko

Condition: excellent (used), Year of construction: 2016, operating hours: 170 h, Size 72 x 102 cm, Presscenter, Wallscreen, program-controlled washup system for rollers, Preset Plus feeder, Preset Plus delivery, Autoplate, blanket and impression cylinders, chambered ducter blade coating unit, non-stop feeder, extended delivery X3, Heidelberg IR dryer, UV dryer at the end of the press, anti-static system in feeder and delivery, Heidelberg Cleanstar, Weko AP 500 powder spray system, Airstar Pro, machine is elevated 500 mm. Machine no.: 551581, impressions: 165 million. Fedpfo Agnifox Aanjpp

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 207817, Anicolor Printing Thickness: 0,6mm +Version CP 2000: Touch Screen Console Straight Machine Alcolor Vario Dampening Grafix Alphatronic 200: Powder Sprayer Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Automatic Blanket Washing Device Fpedpfxov Rm Evj Aansp Technotrans Cooling Device Semi Automatic Plate Change Watercooled Press Ink. Temperature Control Impression Account: 100 Mio. Fully Cleaned

Condition: excellent (used), Year of construction: 2020, operating hours: 96 h, Size 72 x 102 cm, Presscenter XL 3, Axis control, Wallscreen, Autoplate Pro, Preset Plus feeder, Preset Plus delivery, Program-controlled washup for ink, blanket, and impression cylinders, Non-stop feeder, Intercom, Double sheet detector, Extended delivery X2, IR dryer, water-cooled, Heidelberg Cleanstar, Weko AP 500 powder spray, Anti-static system in feeder and delivery, Airstar Pro, Chambered doctor blade coating unit, Machine is elevated 500 mm. Machine no.: 552120, Impressions: 98 million. Fsdpfx Aas Agnh Nsnjpp

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Fsdpfx Aasy Hixvenopp Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: used, Sheet size: 104.8-381x149.2-520.7mm, inside dimensions of the chase: 362x476.3mm, required floor space: 255 Fsdpfx Aaj Aiu S Uonepp

Condition: used, machine/vehicle number: 95832, Equipment: compressor, Stahl KD 78/4 folding machine (KD 78/4-KTL-PD-T) with 4 folding pockets and attachments on 2 sides. Pallet feeder PD 78-T. Equipped with horizontal press delivery system SBP 46.D + MKE.D and roller delivery system. Max. paper width 78 cm. Machine from an active printing company, CE certified, Made in Germany. Available for pickup in Ghent, viewing possible. Fodpo Ahg Ryofx Aanjpp