Used Hitachi Eh 1100 for sale (154)

Condition: used, Year of construction: 2015, bucket 3,8 m weight 17700 kg Ident-Nr. HFLNEC50C00000210 lifting capacity 184.2 kN work height max. 2.97 m mm Hodpfxow Syfpo Ag Nofn

Condition: used, fuel type: diesel, Year of construction: 2014, operating hours: 8,429 h, Empty weight: 14.300 kg Make of engine: Isuzu Hfodpfx Agsxai Rie Njn Track width: 50 cm Dipper / stick length: 250 cm Please contact Kristoff Van Havere for more information - Hydraulic quick hitch CW30 - Bucket 1800mm - Piping for hammer and sorting grab - Grease system - Rubber pads 500 mm

Condition: good (used), power: 296 kW (402.45 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 6,670 h, Equipment: air conditioning, Technical information Track width: 75 cm AdBlue system: Yes Make of engine: VE-6WG1XBSA-03 Empty weight: 52.200 kg Functional Bucket capacity: 2 m³ Hfodpfow Nmtbjx Ag Njn CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HCMJAQ53P00070055 Other information Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 12,1x3,8x3,7 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2016, operating hours: 11,000 h, Serial number: HCMDDN50J0006xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19936 Specifications: Certified until: October 2025 Model year: 2016 Operating hours: Approximately 11,000 hours Power: 197 kW Weight: 31,600 kg Chassis: See pictures New chains Leica GPS Engcon Tiltrotator S70 quick release Sanding bucket Excavator bucket Webasto Central lubrication Additional work light Rotor beam LED bar Rear camera Radio/CD Hjdpfx Agsv U R U Ae Njfn Air conditioning/AC Description: Hitachi ZX300 crawler excavator from 2016. This excavator is equipped with Leica GPS, two buckets, and Engcon tilt, as well as new chains. It is certified and ready for immediate operation. The machine can be delivered at short notice. Hours: 11000 Total Weight: 31600 Kw: 197

Condition: used, Year of construction: 2016, operating hours: 9,743 h, 2016 | Hitachi ZX870-5G with quickcoupler and 2 buckets | Used Tracked Excavator | 9743 hours 📍Location: France, Marignane 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 165000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 69 inspection points 66 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very good general condition of the excavator. Only the access steps have been removed. The turret rotation stop exhibits some latency. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39481 Equippo" is commonly used when looking up more details online. Hedpfoxax Nzsx Ag Nsfn 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, fuel type: diesel, first registration: 06/2014, Year of construction: 2014, operating hours: 2,900 h, Excavator Hitachi ZX33U-5A CLR – 2,900 operating hours – air conditioning – CW 5 – quick coupler system and auxiliary lines – total weight 3,320 kg – = Further Information = Model year: 2014 Drive: Track Unladen weight: 3,320 kg Hjdpfjw A Thmex Ag Nefn Please contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.

Condition: new, functionality: fully functional, fuel type: diesel, color: original, operation weight: 25,300 kg, Year of construction: 2023, operating hours: 120 h, Mini excavator with technical equipment attached, short tail, blade, hydr. HS03 quick coupler, pricing without attachments Hjdpjq R Rkgofx Ag Njfn Price for export on request, immediately available

Condition: like new (used), Demolition, civil engineering, and special construction excavator with teledipper attachment. High, forward-moving cabin for a good overview during loading. Extra counterweight: 1-ton HD boom, 3200mm Bekamax central lubrication system, teledipper with clamshell grab with a capacity of up to 1300 liters and associated camera system. New price: €600,000 with receipts! All verifiable! Hjdpfx Agjw S Iyho Nofn

Condition: good (used), power: 210 kW (285.52 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 10,320 h, Equipment: air conditioning, Technical information Track width: 60 cm AdBlue system: Yes Make of engine: AQ-6HK1X Empty weight: 35.600 kg Functional Bucket capacity: 1,81 m³ Hsdpfxsw Nmr Rj Ag Nefn CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: HCMDDQ5XH00030379 Other information EPA Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,5x2,99x3,6 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2019, operating hours: 5,630 h, Serial number: HCMDBS5XC006001xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20196 Specifications: Certified to Model year: 2019 Hours: Approximately 5,630 Power: 128 kW Net weight: 20,800 kg Hodpfx Aswdu D Eog Njfn Belt width: Approx. 60 cm Machine width: Approx. 275 cm Undercarriage: See pictures Quick release: Gjerstad S70 Buckets: Sanding bucket and digging bucket Rotor tilt Leica GPS system Central grease Hammer hydraulics Rear view camera Additional work light Radio/CD Air conditioning / AC Description:Hitachi ZX190LC crawler excavator from 2019 with approximately 5,630 hours.The machine is delivered with both a sanding bucket and a digging bucket , a tiltrotator , and Leica GPS .The machine is equipped with central grease, hammer hydraulics and a reversing camera.Ready for delivery at short notice. Hours: 5630 Own weight: 20800 Total Weight: 20800 Width: 275 Kw: 128 Model: ZX190 LC-6

Condition: ready for operation (used), Fanuc A20BF card, used, good condition, 100% functional Hfjdpei D U Egefx Ag Non

Condition: ready for operation (used), Year of construction: 2002, operating hours: 725 h, functionality: limited functionality, machine/vehicle number: HSS40050, spindle speed (min.): 3,100 rpm, spindle speed (max.): 14,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates the buyer to collect the item by 26/09/2025. TECHNICAL DETAILS Spindle fault: The spindle is malfunctioning and currently only runs stably above approximately 3,100 rpm. The cause may be either a wiring issue in the control system or an internal fault in the spindle at lower speeds. Stable spindle speed from: 3,100 rpm Max. spindle speed: 14,000 rpm MACHINE DETAILS Operating hours (Machining): 725 h Operating hours (Cutting): 478 h Hfedpfxjxal Rle Ag Non EQUIPMENT - FANUC control with SEICOS interface - Twin pallet changer - Machine table adjustable in 1° increments

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Good working condition. Hfsdpfxsxnpw Ee Ag Non Please check out our other listings as well.

Condition: ready for operation (used), functionality: fully functional, power: 198.58 kW (269.99 HP), fuel type: diesel, empty load weight: 42,000 kg, Year of construction: 1987, operating hours: 13,800 h, machine/vehicle number: 16300999, Machine in working condition. Simple design with no electronic circuit boards (increased safety). Rock bucket: 850 mm. Earth bucket: 1750 litres. Total width: 3.30 m. Weight: 42 tonnes. Arm: 2.6 m. Functional, no repairs required. No oil leaks or smoke. Contact by phone in French, or by email in your language. Hsdpfexb Dhrjx Ag Nsfn

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC Lathe Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Spindle bore: 52 mm Hsdpfxov T Uf Aj Ag Nofn Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Machine without tailstock. Machine can be demonstrated under power. In good condition, complete machine documentation is available. For further information, see data sheets.

Condition: used, Hitachi 300A DT-NP 3 VT - without additional accessories - shipping possible at an extra charge Hfedpfxexb S Utj Ag Nsn

Condition: used, Year of construction: 1996, turning diameter 320 mm turning length 1100 mm Hodew N Hicepfx Ag Nefn control Fanuc

Condition: used, fuel type: diesel, Year of construction: 2014, operating hours: 12,624 h, Empty weight: 40.000 kg Production country: NL Hfjdjwhih Tepfx Ag Non Please contact Kristoff Van Havere for more information

Condition: used, Year of construction: 2015, operating hours: 2,600 h, CE mark: yes Please contact ATS Norway for more information Please provide reference number upon request: 21350 Specifications: 2015 model 2600 hours Weight: 22300 kg 122 kW Hjdjxdhxmjpfx Ag Nsfn Certified until 09/26 Belt width: 60 cm Machine width: 300 cm App-controlled webasto Camera Central lubrication Tooth tray Sanding bucket Rotor tilt Chassis (see pictures) Air conditioning/ac Ready for delivery   Description: 2015 Hitachi ZX210LC with 2 buckets for sale. The excavator has run for 2006 hours. Certified until 09/2026. Ready for delivery. Hours: 2600 Own weight: 22300 Year controlled: Yes Year controlled until: 09/26 Width: 250 Length: 1272 Kw: 122 CE: Yes Model: ZX210LC

Condition: repair required (used), functionality: limited functionality, A used Ink Jet Printer suitable for parts or repair - unit does power up - see error messages in the pictures attached Hfjdpfxjt Amk Ee Ag Non

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Hsdpov T Un Defx Ag Nefn Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Machine documentation is available.

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm Hjdpfxovanvne Ag Njfn control FANUC

Condition: used, Year of construction: 2000, turning diameter 450 mm turning length 380 mm control Seicos total power requirement 11 kW weight of the machine ca. 4,6 t CNC lathe Hitachi Seiki Hfsdpow N Hh Sefx Ag Nsn HT 20 Year of construction 2000 Control Seicos Turning diameter 450 mm Turning length 380 mm travel range X 215mm Z 400 mm

Condition: used, color: other, Year of construction: 2007, operating hours: 7,514 h, Power internal combustion engine: 187 HP (138 kW) GVW: 11.500 kg Make of engine: ISUZU Lifting capacity: 6.500 kg CE mark: yes Serial number: HCM81U00T00030124 Hodpfxjr Epvis Ag Nofn Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control: CNC path control with color screen SEIKOS 16 M TECHNICAL SPECIFICATIONS Working area: X-axis (table traverse): 680 mm Y-axis (spindle head vertical): 680 mm Z-axis (column longitudinal): 680 mm Pallet clamping surface: 500 x 500 mm Drive power (50% DC/continuous): 25/22 kW Speed range (2 stages): 60 – 12,000 rpm Tool holder DIN 69871: A 40 Tool changer (chain magazine) Number of magazine positions: 60 Max. tool diameter: 95/160 mm Chip-to-chip time: 3.8 sec EQUIPMENT/ACCESSORIES - Full enclosure with sliding door, electrically interlocked, incl. work area lighting - 2-way pallet changer - Automatic tool changer ATC 60 - Chip conveyor - Coolant system with 3 pumps, 100 l tank - Coolant supply via spindle collar approx. 25/40 bar Hfsdpfx Agew Ud U Tj Nsn - Work area washdown - Broken drill detection (controllable via G-code) - Tool measurement (controllable via G-code) - Electronic handwheel - 2 additional pallets - Table with 1° indexing - Spindle electronically positionable - Installation elements - Documentation