Used Hitachi Zw 250 for sale (99)

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. Isdpfjwf Aftjx Apnjib 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Condition: good (used), Year of construction: 2000, functionality: fully functional, operating hours: 10,000 h, travel distance X-axis: 680 mm, travel distance Y-axis: 680 mm, travel distance Z-axis: 680 mm, number of slots in tool magazine: 60, table width: 500 mm, torque: 237 Nm, nominal power (apparent): 25 kVA, rapid traverse X-axis: 45 m/min, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, Horizontal machining center Hitachi Seiki HS 500 offered by user due to production change. The machine was exclusively used for specialized tasks (medical technology) and primarily machined aluminum and stainless steel. The condition is excellent for its age, with approximately 10,000 cycle hours and 27,000 power-on hours. Control: Sigma (Fanuc), 2 pallets, 500 x 500 mm. Iijdpfx Asvnl Dropnob Technical data see PDF. Inspection under power is possible. Clamping devices are not included with the machine! Loading with the overhead crane is possible!

Condition: refurbished (used), functionality: fully functional, Year of construction: 2026, machine/vehicle number: Hitachi HPV102HW, Rebuilt Hitachi HPV102HW main pump complete with gearbox and pilot pump. Service exchange unit. New parts: - Bearings - Cylinder blocks and valve plates - Head cover - Drive shafts - Seal kit Regulators are for Hitachi Zaxis 180W and Zaxis 210W. Also suitable for: Hitachi Zaxis 200, Zaxis 210, Zaxis 250, Zaxis 280 Iisdpoyg Ip Ssfx Apnsb Hitachi EX215, EX255, EX285 Hitachi EX200-5, EX220-5, EX250-5

Condition: used, Year of construction: 2012, Operational condition machines. Ask for specification and details. Iodoywi Apepfx Apnoib 2 units available!

Condition: used, Year of construction: 1999, turning diameter 450 mm turning length 380 mm control FANUC Iedpfxovanvno Apnsib

Year of construction: 2003, condition: excellent (used), EMC Mains filter Make Hitachi for frequency inverter Iedpjgrhimefx Apnsib Filter for FFFB - SJ300- 750/900 HF,L 300,100 HF further data,see picture 3 x 220 Ampere length 1000 mm width 300 mm height 190 mm

Condition: like new (used), functionality: fully functional, operating hours: 300 h, FIAT HITACHI BULLDOZER MODEL FD175, EX-MILITARY Operating hours: approx. 300 to 900 Year: from 1997 to 1999 Weight: 17,000 kg Engine: FIAT 8365 T with 123 kW Iiodpoy Ifnisfx Apnob EQUIPPED WITH DOUBLE BLADE, ROPS AND RIPPER MULTIPLE UNITS AVAILABLE CAN BE RE-REGISTERED WITH MILITARY DOCUMENTATION.

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter Drive Controller Combivert -Type: SJ200-005NFE2 -Power: 0.55 kW -Number: 1x frequency converter available -Dimensions: 120/80/H130 mm Iodpfx Ast Sbagopnoib -Weight: 0.8 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 Isdpfedtcrqox Apnsib -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive -Tool changing positions: 80 -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Weight: 860 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, servo controller, control system, converter, PLC control system, inverter, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter inverter -Type: WL200-004SFE -Power: 0.4 kW -Number: 2x inverters available -Price: per piece -Dimensions: 120/70/H130 mm Isdpjxt Hdasfx Apnjib -Weight: 0.7 kg/pc.

Condition: used, Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm Iiedpfx Asdwc I Sepnob -Weight: 0.6 kg

Condition: used, PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki Iijdpfxedryd Es Apneb -Control: FANUC -Dimensions: 400/310/H100 mm -Weight: 3.8 kg

Condition: not inspected (used), Year of construction: 1989, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, Manufacturer: Hitachi Seiko Ltd., Japan Type: H-DS02N Year of manufacture: 1989 X-axis: approx. 200–400 mm Y-axis: approx. 150–300 mm Z-axis: approx. 150–250 mm Table size: ~300×200 – 500×300 mm Max. workpiece weight: 200–500 kg Type: transistor EDM generator Max. current: ~30–100 A Iedpey D Nccsfx Apnsib Pulse control: analog / early digital Achievable surface finish: Ra ~0.8–3 µm Operationality uncertain

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: VM40027E, Selling for spare parts 2 CNC milling machines Hitachi Seiki VM40II and VM50. Iijded Tf Npepfx Apnob

Condition: used, Year of construction: 1997, machine/vehicle number: 50048, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table length: 510 mm, table width: 1,120 mm, X-axis - 760mm, Y-axis - 510mm, Z-axis - 510mm. Table size 1120x510mm. CNC control - Seicos A10M Iiodpfxjvm Uvbe Apnsb

Condition: used, Year of construction: 1997, machine/vehicle number: VM40027E, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 8,000 rpm, X-axis - 500mm, Y-axis - 550mm, Z-axis - 400mm. Speed 8000 rpm. CNC control - Seicos MYII Iiodpfx Aevm Utmepnsb

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm Iisdpfx Apeir E Syjnjb -Weight: 10.3 kg

Condition: good (used), Hitachi starter motor -Voltage: 12 V -Type: S114-443 Iiedpeb A R Utofx Apnsb -Teeth: 8 -Weight: 5 kg

Condition: used, Year of construction: 2021, operating hours: 11,213 h, Internal vehicle no.: MK300022 Ijdpfx Aeym H R Ispnsib German vehicle Available immediately at our yard in Kaufungen - Kassel For more information, contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HITACHI ZX210LC-6 crawler excavator Year of manufacture: 2021 11,213 hours 23.1 tonnes Subject to errors and prior sale We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, color: other, Year of construction: 2007, operating hours: 7,514 h, Power internal combustion engine: 187 HP (138 kW) GVW: 11.500 kg Make of engine: ISUZU Lifting capacity: 6.500 kg CE mark: yes Serial number: HCM81U00T00030124 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   Ijdpfxer Epvio Apnoib We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: ready for operation (used), Fanuc A20BF card, used, good condition, 100% functional Iiedpfxei D U Egj Apnjb

Condition: ready for operation (used), Hitachi Seiki tool turret 5-fold , Ø 50 cm , mounting plate: 235 x 345 mm , Ø hole for tool holders: 40 mm ,used, normal signs of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Isdpfei Ea Nmsx Apnoib

Condition: used, fuel type: diesel, first registration: 06/2014, Year of construction: 2014, operating hours: 2,900 h, Excavator Hitachi ZX33U-5A CLR – 2,900 operating hours – air conditioning – CW 5 – quick coupler system and auxiliary lines – total weight 3,320 kg – = Further Information = Model year: 2014 Drive: Track Unladen weight: 3,320 kg Please contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm. Ijdpfx Asw A Thmspnoib

Condition: used, first registration: 01/2021, Brand: Hitachi Model: ZX65USB Year of manufacture: 2021 Operating hours: approx. 2,000 h Number of keys: 1 3 buckets included (40/80/160) 1 demolition hammer included Quick coupler Operating weight: 6.16 t, Transport length: 5.79 m, Transport width: 2 m, Transport height: 2.54 m Digging bucket capacity: 0.24 m³, Undercarriage: SL, Track width: 400 mm, Boom: MB, Reach: 6.56 m, Digging depth: 4.12 m, Breakout force: 41.1 kN, Bucket width: 0.5 m, ZAXIS Series, Engine manufacturer: Yanmar, Engine type: 4TNV98C, Engine power: 41.2 kW, Displacement: 3.318 l, RPM at max. torque: 1,300 rpm, Torque at RPM range: 230.9 Nm, Number of cylinders: 4, Cylinder bore x stroke: 98x110 mm, Emission Stage V, Operator cabin: ROPS, Dozer blade, Diesel particulate filter, Overload warning, Air conditioning, 400 mm rubber pads, 1,850 mm arm, C-piping, Special paint finish RAL5015 (Sky Blue), Henle Hydraulic Quick Coupler serial no. 212153, Henle grading bucket. Fully functional, ready for immediate use. Now including demolition hammer! Sale exclusively to commercial customers, warranty excluded. Errors and prior sale excepted. Iisdpoyud Dnsfx Apnsb

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table width: 1,000 mm, table length: 450 mm, TECHNICAL DETAILS Travel Paths Iiodpfow A Rtmjx Apnob X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Spindle and Tool Tool holder: ISO 40 Number of tool positions in magazine: 30 Spindle speeds – stepless: 0 – 12,000 rpm Table Pallet size: 1,000 x 450 mm Feeds Feed rate stepless: 0 – 30,000 mm/min Rapid traverse: 30 m/min Control: Fanuc 18 M MACHINE DETAILS Electrical Data Total connected load: 32 kVA Total power requirement: 15 kW Dimensions & Weight Machine weight approx.: 6.5 t Required floor space approx.: 3.5 x 2.5 x 2.4 m