Used Hitachi Zx170W 3 for sale (139)

Condition: used, Year of construction: 1998, Technical details: x-travel: 560 mm y-travel: 450 mm z-travel: 450 mm table surface area: 760 x 410 mm turning speed range: 8.000 U/min Vertical Processing Centre * Redpfx Ajwvblgoh Ueck

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal power input: 620 W -Mains connection: 230 V -Drill -div. drills Redpsb A Hxujfx Ah Ueck -Suitcase -Weight: 5.5 kg

Condition: used, Year of construction: 2018, operating hours: 9,577 h, Mono boom, stick approx. 3200 mm, hydraulic quick coupler system / CW 45 HG from 2019, trenching bucket approx. 1400 mm wide, grab and hammer line, 800 mm track pads, air conditioning, LED headlights, 3 cameras, Freshfilter Multibox, prepared for Topcon 3D, machine may have advertising decals and/or lettering. Our offer does not generally include new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops. The vehicle may be equipped with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. Rjdpsxa Tkmofx Ah Ujck We are happy to prepare a financing or leasing offer for this unit. Please contact us!

Condition: used, operating hours: 22,327 h, Fiat-Hitachi Fh 220 | Used Tracked Excavator | 22327 hours 📍Location: Germany, Meppen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 15000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 37 approved ✅ 19 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Heavily used machine. Air conditioning not available. Windshield wiper is defective. Ventilation of the hydraulic oil is defective. Operating hour meter is defective; no reliable information available. Track shoes can be cut at an additional cost to reduce transport width. The year of construction is unknown and cannot be verified. The operation manual states 1980 or 1990, but this cannot be confirmed. The operating hour meter is from another machine, the displayed hours are incorrect. The machine has possibly between 20,000 and 30,000 hours. The cabin has been replaced and is not original. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39638 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Redpfxex N Have Ah Uock ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Fanuc A20BF card, used, good condition, 100% functional Rodsi D U Egspfx Ah Ujck

Condition: good (used), power: 210 kW (285.52 HP), fuel type: diesel, color: orange, Year of construction: 2017, operating hours: 10,292 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: AQ-6HK1X Empty weight: 35.600 kg Functional Bucket capacity: 2 m³ CE mark: yes Redpfx Ahjx Am H Ho Ueck Condition Technical condition: good Visual appearance: good Identification Serial number: HCMDDQ50L00080121 Other information EPA Marked: yes Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,4x3,6x3,3 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 1999, total height: 2,000 mm, total length: 3,000 mm, total width: 1,800 mm, Empty weight: 4.000 kg Price: On request Driven tools included Barfeeder included - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HT23372E - Drive system: CNC - Control system brand: Yasnac - Power [kW]: 15.0 - Centre height [mm]: 230 - Swing over bed [mm]: 450 - Distance between centres [mm]: 380 - Spindle bore [mm]: 59 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 5000 - Options: Bar feeder, Live tools - Transport dimensions: 3000mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg Rodpfxowqf I Uj Ah Usck - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W Rodpfx Ajir E Syjh Usck -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg

Condition: used, Year of construction: 2022, operating hours: 1,304 h, Serial number: HCMDEQ50E0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20257 Specifications: - 2022 model - Certified to: 02/26 - 1304 hours (will increase slightly) - 8770 kg - 42.4 kW - Machine width: 229 cm Rcodpfswi R I Dex Ah Usk - Blade - Extra hydraulics - Central lubrication - Undercarriage (see pictures) - Service agreement - Rototilt - Cleaning bucket - ​​Excavating bucket - ​​Narrow bucket - ​​Roadliners - MIG 2 levers - S50 attachment - Extra lights - Air conditioning/ac - Radio - Ready for delivery Description: We have a 2022 Hitachi zx85us-6 excavator w/ rototilt, cleaning bucket, digging bucket, narrow bucket for sale. The machine is well maintained and in good condition. It is on service agreement as of today. Ready for delivery. Hours: 1304 Total Weight: 8770 Year controlled: Yes Year controlled until: 02/26 Width: 229 Kw: 42.4

Condition: used, Year of construction: 2022, operating hours: 5,510 h, 2022 | Hitachi ZX250 LCN-7 with Oilquick OQ-80 | Used Tracked Excavator | 5510 hours 📍Location: Germany, Düsseldorf 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 97400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Rsdpfx Aex Nyf Seh Uock 👷‍♂️ Inspected by an independent expert 61 inspection points 58 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Very well maintained excavator. Clean, without leaks. Strong engine and pump performance. No worrying noises and no smoke observed. Minor play on the boom pin. The grapple shown on pictures is not included. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40200 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Hitachi Seiki tool turret 5-fold , Ø 50 cm , mounting plate: 235 x 345 mm , Ø hole for tool holders: 40 mm ,used, normal signs of use, 100% functional, scope of delivery according to photos ATTENTION: Please ask charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Rcsdpfx Aji Ea Nmoh Uek

Condition: used, fuel type: diesel, Year of construction: 2016, operating hours: 9,957 h, Drive: Wheel Please contact Kristoff Van Havere for more information - Mechanical quick hitch Lehnhoff MS10 Redpfxjx Hnt Ee Ah Ujck - Auxiliary piping for hammer and sorting grab - 2 piece boom

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC lathe, HITACHI SEIKI, type HT 23-RIII, year 2000 SEICOS L MULTI DIALOG control system. Maximum turning diameter: 450 mm Maximum turning length: 630 mm Tool turret with 12 positions VDI 40 Chuck diameter: 250 mm Spindle bore: 78 mm Spindle speeds: 30-4000 rpm Rapid traverse: X and Z 30 m/min Chip conveyor. For further information, see data sheets. The machine is in good condition and can be demonstrated under power. Redpov T Un Djfx Ah Usck Machine documentation is available.

Condition: good (used), Hitachi starter motor -Voltage: 12 V Rcsdjb A R Utepfx Ah Ujk -Type: S114-443 -Teeth: 8 -Weight: 5 kg

Condition: used, Year of construction: 2021, Serial number: hcmdeq50j0009xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20012 Specifications: 2021 model 1100 hours (doesn't matter) 42.2 kW 8730 kg Machine width: 232 cm Additional hydraulics Central lubrication Track steering Rodpfx Aev U S Tysh Ujck Engcon proportional tiltrotator Undercarriage in good condition Multi-X coupling on hydraulics Webasto Taillight rig on the solder Sanding tray Tiltrotator with clamp Air conditioning Radio Toolbox Ready for delivery Description:We have a 2021 Hitachi ZX85US-6 tiltrotator excavator with grapple and sanding bucket for sale.According to the owner, According to the owner, it was taken out 6 months ago in 2022. According to the owner, everything works as it should. The machine has few hours.Service is carried out by the owner.The machine is ready for delivery. Own weight: 8730 Model: zx85us-6 gravemaskin m/ rototilt med klype og pusseskuffe

Condition: used, Year of construction: 2019, operating hours: 1,248 h, Equipment: ABS, Hitachi ZX 60 * Dead weight 5.99 t. * Transport length 5.79 m. * Transport width 2 m. * Transport height 2.55 m. * Bucket capacity min. 0.22 m³ * Bucket capacity max. 0.24 m³ * Track width 400 mm. * Driver protection KbR. * 2 x proportional control * Powertilt with Lehnhoff system * Air conditioning * ZLG 6265KG Rsdpfxeulll Te Ah Uock * Engine 40,5 KW 55 PS * Blade support

Condition: used, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Rcodpsumy Apjfx Ah Uok Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Condition: good (used), power: 66 kW (89.73 HP), fuel type: diesel, color: orange, Year of construction: 2007, operating hours: 9,900 h, Technical information Track width: 60 cm Empty weight: 14.300 kg Make of engine: CC-4BG1T Functional CE mark: yes Rjdpfxjxx Hz Ne Ah Ueck Condition Technical condition: good Visual appearance: good Identification Serial number: HCMBAC00T00074284 Other information EPA Marked: yes Dipper / stick length: 260 cm Emission level: Stage IIIA / Tier III Delivery terms: EXW Transport dimensions (LxWxH): 7,4x2,6x3,1 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. Rodpfx Aswf Afteh Ueck 1. Headstock with chuck. 1. X and Z axis motors. 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Condition: used, Year of construction: 2008, operating hours: 1,895 h, machine/vehicle number: HCM1M500K00001112, mast type: telescopic, fuel type: diesel, color: orange, Drivetrain Drive: Track Weights Empty weight: 8.140 kg Rcedpfjx Dqphjx Ah Uek Functional Lifting capacity: 250 kg Working height: 1.590 cm Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 1260 m Max swing of platform in degrees: 180 Rental currency: EUR Production country: JP Additional information Please contact Sales Department for more information

Condition: used, Year of construction: 2018, operating hours: 6,549 h, CE mark: yes Serial number: Product ID Number: HCMDBS5XC0060xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21258 Specifications : 2018 model. 6549 hours. 128.4 kW. Net weight: 20800 kg. Additional hydraulics. Central lubrication. Rear view camera. Bunkering pump. Excavator bucket. Encon Rototilt. Belt width: 60 cm. Machine width: 280 cm. CE marked. Certified: yes. Watch video. Description : The drawer that comes with the machine is not included in the sale. It comes with a digging tray and Engco rototilt. A sanding bucket can be included for an additional price. Rjdpjw Upc Ajfx Ah Ujck Delivery is arranged. Hours: 6549 Own weight: 20800 Total Weight: 20800 CE: Yes Model: ZX 190 LC-6 med Engcon rototilt og graveskuffe.

Year of construction: 1991, condition: ready for operation (used), Additional Equipment Various Accessories This HITACHI SEIKI HT 20SII was manufactured in 1991. A horizontal turning machine featuring a turning diameter of 200 mm and a turning length of 400 mm. It includes a Multi-Seiki control system and various accessories. Consider the opportunity to buy this HITACHI SEIKI HT 20SII horizontal turning machine. Contact us for more information. Application Types Turning Rjdpfjx D Rxvox Ah Uock

Condition: used, Year of construction: 2022, total length: 4,985 mm, drive type: Diesel, construction width: 1,650 mm, Wheel loader Redpfx Ajumy Avoh Usck Technical condition: New Front tires type: Pneumatic Front tires Size: 12.5/80 Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Bulk material bucket, pallet forks

Condition: good (used), power: 197 kW (267.85 HP), fuel type: diesel, color: orange, Year of construction: 2018, operating hours: 5,300 h, Equipment: air conditioning, Technical information Track width: 80 cm AdBlue system: Yes Make of engine: AQ-6HK1X Empty weight: 31.600 kg Functional Bucket capacity: 2 m³ CE mark: yes Rjdpfx Aexxpfkjh Usck Condition Technical condition: good Visual appearance: good Identification Serial number: HCMDN5XC00020362 Other information EPA Marked: yes Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,7x3,4x3,3 Production country: NL Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC Lathe Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Rjdov T Uf Aopfx Ah Uock Spindle bore: 52 mm Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Machine without tailstock. Machine can be demonstrated under power. In good condition, complete machine documentation is available. For further information, see data sheets.