Used Horizontal Boring Mill for sale (17,375)

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Blodpox T Ddysfx Aaasf Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Blodpfeu Dahnjx Aaaef Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, total height: 2,450 mm, total length: 4,000 mm, total width: 2,000 mm, Empty weight: 6.300 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.0 - Number of axes [pcs.]: 3 - Spindle diameter [mm]: 75 - Table length [mm]: 1000 - Table width [mm: 800 - X-axis travel [mm]: 800 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 100 - Drilling capacity [mm]: 600 - Tool holder: ISO40 - Min. spindle speed [rpm]: 12.5 - Max. spindle speed [rpm]: 1000 - Options: Digital readout - └ Type of digital readout: Sony - Transport dimensions: 4000mm x 2000mm x 2450mm (l x w x h) Bledpfxowr Drhe Aaasf - Transport weight [kg]: 6300kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, table load: 5,000 kg, spindle diameter: 110 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 3,000 rpm, table length: 1,500 mm, table width: 1,200 mm, travel distance W-axis: 550 mm, overall weight: 22,500 kg, year of last overhaul: 2025, MICROMILL Table Type Boring Mill HBM 4 Control: Heidenhain iTNC 530 Tool Changer: 60 stations Tool Holder: SK 50 Chip Conveyor Spindle run time: 9,700 hours For further machine data, see data sheet Documentation available In 2025: - Geometric inspection carried out - Glass scale replaced - Spindle head guide refurbished Machine still under power and in production 16-ton overhead crane available for disassembly Bedoyutfuspfx Aaaelf

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, spindle diameter: 130 mm, spindle speed (max.): 2,000 rpm, TECHNICAL DETAILS Bsdpfx Aaeyvtrfsaslf Travel X-axis: 2,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,600 mm W-axis: 600 mm W-travel (quill extension): 900 mm Boring diameter: 800 mm Spindle diameter: 130 mm Spindle speed: 10 - 2,000 rpm Max. torque at boring spindle: 3,150 Nm Table load capacity: 8,000 kg Table size: 2,000 x 1,600 mm Clamping area: 1,800 x 2,000 mm T-slot width: 28 mm T-slot distance: 160 mm Rapid traverse X-axis: 2,500 mm/min Rapid traverse Z-axis: 2,500 mm/min Feed W-axis: 2,500 mm/min Feed Y-axis: 2,500 mm/min Rapid movement W-axis: 3,150 mm/min Rapid movement Y-axis: 5,000 mm/min Facing slide travel: 320 mm Max. torque at facing slide: 5,300 Nm Max. facing diameter: 1,400 mm MACHINE DETAILS Control: Heidenhain 430 Tool holder: ISO 50 Drive power – spindle motor: 15 - 30 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 4,000 x 4,000 mm Machine weight approx.: 40 t

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Bledpfxeygk Drj Aaasf Longitudinal Travel: 700mm Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Bljdpophl Ecofx Aaajf Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: good (used), Year of construction: 1972, functionality: fully functional, x- travel: 290 mm y-travel: 170 mm Blodpfxeyyx N Rs Aaasf z-travel: 310 mm Milling spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40-2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 mm dimensions: 1066 x 1048 x 1330 mm

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 500 mm z-travel 400 mm table-size 900 x 530 mm control Heidenhain TNC 355 tool adaptor ISO 40 | | turning speed range 40- 4000 U/min rapid speed 5 / 6 m/min feed speeds 2 - 3000 | mm/min | Bjdpfsyxr Hmjx Aaaolf power requirement 6 kW table load 350 kg dimensions 2,6 x 1,8 x 2,2 m weight 2,6 t Univers. milling machine 3 axis - external electric handweel - housing - universal head

Condition: good (used), NC horizontal boring mill with point-to-point control HEIDENHAIN TNC 124 Year of manufacture: 1982 / retrofitted with control in 1997 Bedpfx Aaoyxp D Nsaolf Spindle diameter: 150 mm Spindle taper: ISO 50 Travel distances: X-axis, table (cross): 3000 mm Y-axis, spindle head (vertical): 2000 mm W-axis, quill travel: 1100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), NC plate boring mill with point-to-point and linear HEIDENHAIN TNC 124 control Year of manufacture: 1975 / retrofitted with CNC control in 1997 Spindle diameter: 130 mm Spindle taper: ISO 50 T-slot clamping surface: 6000 x 3000 mm Travel distances: X-axis, table (cross): 6000 mm Bledpfeyxp Dpex Aaaef Y-axis, spindle head (vertical): 3000 mm W-axis, quill travel: 1100 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 1965, For technical data, see images. Bljdeyvtm Nepfx Aaasf

Condition: used, Webster Bennett 48 Inch Elevating Rail CNC Vertical Borer. Serial Number 6644-1 Bjdpfoymc Ipjx Aaaelf Chuck manual 48 inch, supplied with jaws Hydraulic turret Fanuc 18i -T Control. Swarf conveyor Air conditioning Unit on Electrical Panel. 1250mm (approx. ) under tool to table.

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 770 mm z-travel 805 mm Control Heidenhain iTNC 530 spindle tunring speed 16.000 U/min spindle drive 25/32 kW torque 159/206 Nm tool taper HSK-A 63 number of tool places 40 Pos. size of pallet 400 x 400 mm numbers of pallets 2 auto power on hours ca. 38.013 Blsdpfxjx Ik Tqe Aaaef spindle hours ca. 17.871 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Interchangeable inserts - Chip conveyor - Internal coolant system - Tool cleaning system - Tool length measuring device - Laser measuring system for tool monitoring, Blum - Compressed air supply through the spindle center - Cleaning gun - Blow gun - Electronic handwheel, Heidenhain HR 520 - Decentralized work area extraction, 800 m³/h Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the Bledpfx Aoxtfz Doaaof scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window Blodpfx Aaoxcp R Ujajf - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 1989, Immediately available from training center: Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of manufacture: 1989 Table: 1250 x 250 mm Table load capacity: 1250 kg Blsdoyykw Hjpfx Aaasf Travel X/Y/Z: 700 / 400 / 500 mm Heidenhain 3-axis digital readout SK 40 Spindle speeds: 55 – 2800 rpm Feeds: 10 – 630 mm/min, stepless Vertical head Horizontal milling device Drive power: 6.3 kW Weight: 2.5 t Offered at EUR 2,000 – plus VAT, ex location

Condition: defective spare-parts repository (used), Year of construction: 1980, Machine: Type: BFT 90/3at Manufacturer: UNION Year of manufacture: 1980 Control: NC control, HEIDENHAIN TNC 131 Electrical cabinet: by Reliance Machine group: Table-type boring mill Customs tariff number: 84592100 Technical data: Spindle diameter: 102 mm X-axis travel: 1000 mm Y-axis travel: 1250 mm Z-axis travel: 1600 mm Tool holder: ISO 50 DIN 2048 Spindle stroke: 710 mm Spindle speeds: 8 – 1600 rpm Table size: 1000 x 1120 mm Table rotation: 360° Max. workpiece weight: 2,500 kg Feed ranges: 0.8 – 2,000 mm/min Rapid traverse: 3.15 m/min Feed force: 16,000 N Spindle motor: 11 kW Total power requirement: 23 kW Machine weight: approx. 9.3 t Space requirement: approx. 5.3 x 3.8 x 3.14 m Special features and notes: Electronic issue: There is an electronic problem (control board needs to be replaced). The price has been adjusted accordingly (€10,500.00) to account for the necessary repair work. The HEIDENHAIN contouring control and the mechanical components of the machine are in good condition. Inspection is possible by appointment to assess the machine's condition and the extent of the electronic issue. For further technical details, please refer to the attached data sheet. Bjdpfx Aaeygarleaolf Important information: All information is subject to confirmation, prior sale, errors, and availability. Technical data and all information provided are non-binding and only for orientation purposes. Contact: If interested or to arrange a viewing, please send a message or make an appointment. Disclaimer: The item is sold as described. Returns, warranty, and guarantee are excluded. The buyer agrees that the item is purchased in its current condition, "as seen," with no right of return. No liability is assumed for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above-mentioned terms and conditions.

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m Bsdpsu Idp Djfx Aaaslf weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: good (used), Year of construction: 2007, control 840 D x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Blodpfx Aaswzyp Uoaef Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. Bedpfxevr Stuo Aaaolf This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Bljdpfx Aajqa Txqsajf Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, spindle diameter 140 mm x-travel 6000 mm y-travel 2400 mm w-axis . mm Bedpfx Aeywcmboaaolf ram: horizontal adjustment . mm ram: diameter 300 mm spindle taper ISO 50 turning speeds 3,15-800 U/min rotary table: 2250x2250 mm table travel longitudinal 1600 mm rotary table: 2250x2250 mm table travel longitudinal 1600 mm Optional worktop Optional: 2 Collet boring tables The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 90 mm x-travel 1250 mm y-travel 1120 mm z-travel 1400 mm w-axis 710 mm spindle turning speed range 28 - 1400(x18) U/min tool adaptor MT 5 Table dimensions 1000 x 1120 mm Facing head, 3 axis digital read out, Bljdpfx Aeyuqg Noaajf spindle support and tailstock.

Condition: used, spindle diameter 125 mm spindle travel 1000 mm Bodpfsyuql Eex Aaajlf column movement horizontal 7000 mm headstock - vertical 2500 mm/min cross travel column 450 mm taper ISO ISO 50 P.D.B. total power requirement 25 kW