Used Horizontal Drill for sale (10,458)

Condition: excellent (used), Year of construction: 2009, operating hours: 7,700 h, functionality: fully functional, mileage: 7,700 km, overall weight: 5,050 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 5,050 kg, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, adjustable chassis, all wheel drive, hydraulics, low noise, rubber tracks, MGC.pl – professional sales and service of VERMEER machines! We specialize in the sale and service of professional VERMEER horizontal directional drilling rigs. We provide expert technical advice, assistance in selecting the right equipment, and service support. We also offer other VERMEER drilling rig models. VERMEER NAVIGATOR D20x22 SERIES II – 2009 VERMEER NAVIGATOR D9X13 SERIES II - 2012 VERMEER D24x40A - 2003 We offer for sale a professional VERMEER D20x22 II NAVIGATOR horizontal directional drilling rig from 2009, manufactured in the United States. The machine comes from its first and only owner, who has used it continuously since it was new until the cessation of their business operations. We have a flushing system available for this DRILLING RIG, which is not included in the PRICE. Engine - Model: Kubota 3800 Turbo - Type: Turbocharged diesel engine - Power: 62 kW / 83 hp, approximately 84 hp - Maximum idle speed: 2400 rpm - Engine oil capacity with filter: 8.5 l - Fuel tank: 95 l Drilling parameters - Maximum spindle torque: 2983 Nm - Maximum spindle rotation speed: 205 rpm - Thrust force: approximately 89 kN / 9.07 t - Pull force: approximately 89 kN / 9.07 t - Minimum bore diameter: 9 cm - Carriage travel speed – fast range: 41 m/min - Carriage travel speed – slow range: 27 m/min - Automatic rod feeder: yes Drill rods - Type: Vermeer Firestick® I - Single rod length: 3 m - Rod diameter: 52 mm - Single rod weight: 27 kg - Minimum bending radius: 31 m - Rod magazine capacity: 107 m total length Flushing and hydraulic system - Maximum flushing pump capacity: 95 l/min - Maximum flushing pressure: 52 bar - Hydraulic oil tank capacity: 87 l Dimensions, weight, and travel - Maximum length: 541 cm - Transport length: 508 cm - Width: 119 cm - Height: 193 cm - Catalog weight: 4808 kg - Maximum travel speed: approximately 4 km/h EQUIPMENT Hydraulic drilling system Track-type undercarriage Operator station with seat Drill rod magazine Hydraulic drilling mast Pjdpe Ad I Husfx Abujrc Anchoring and stabilization system Control system for working functions Design adapted for professional trenchless operations APPLICATION The VERMEER D20x22 II drilling rig is used for: Construction of fiber optic and telecommunications networks Installation of water supply systems Construction of gas networks Laying of power cables Installation of pressure sewer systems Construction of culverts under roads and railway tracks Implementation of infrastructure projects using trenchless methods GREATEST ADVANTAGES OF THE OFFERED MACHINE 1 OWNER SINCE NEW – the machine remained in the hands of one company throughout its service life. SALE DUE TO CESSATION OF BUSINESS – the previous owner has ceased operating the business. INSPECTION REPORT: The machine has been tested for various functions and is fully operational. There are no leaks. The engine runs smoothly, both when warm and cold. The hydraulic system also has no significant play or leaks. The stated price is net and applies to export and for companies. A substantial discount is possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Prodpfxozhx D Uj Abuec Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine Predpfx Abeyub Azeuoc with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: excellent (used), Year of construction: 2012, operating hours: 5,656 h, functionality: fully functional, overall weight: 2,800 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 2,800 kg, fuel: diesel, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, hydraulics, low noise, rubber tracks, An authorized SUBARU dealer in Łaziska Górne has a Vermeer D9x13 Series 2 horizontal directional drilling rig from 2012 for sale, with 5650 operating hours. We specialize in importing and selling these Vermeer and Ditch Witch drilling rigs. The machine is on-site, has been inspected, and is ready for operation. Technical specifications of the Vermeer D9x13 Series 2: Engine: Kubota V1505T Diesel, turbocharged Engine power: 47 HP / 35 kW Push/pull force: 40 kN / 9000 lbs Maximum torque: 1763 Nm Spindle speed: up to 220 rpm Maximum carriage speed: 42.7 m/min Drilling fluid pump: 34.1 l/min or 56.8 l/min, depending on the version Maximum drilling fluid pressure: 51.7 bar Psdpfxjzumt Rj Abuorc Drilling fluid tank on the machine: 94.6 l Drill rods: Vermeer Firestick, length 1.8 m, diameter 42 mm Machine length: 3.80 m Transport width: 0.90 m Maximum working width: 1.08 m Height: 1.75 m Weight with drill rods: approximately 2860 kg Additionally available: We also have a small Ditch Witch FT5 drilling fluid pump/mixer from 2021, which is a great match for this model and provides a practical set for small and medium-sized drilling projects. Ditch Witch FT5 – key data: Year of manufacture: 2021 Tank capacity: approximately 757 liters / 200 gallons Maximum flow to the drilling rig: approximately 68 l/min Engine: Honda GX160, gasoline Engine power: approximately 5.4 HP Dimensions: approximately 185 × 81 × 136 cm Weight: approximately 182 kg Option to purchase the drilling rig alone or as a set with the Ditch Witch FT5 drilling fluid pump. The stated price is net and applies to export and business customers. A significant discount is possible for individual customers – Please contact us directly by phone to get your best price.

Condition: used, Sicma brand double horizontal drilling and oscillating machine with 3 drilling spindles and 1 oscillating spindle, used. Pjdpfxezxg Ive Abuerc

Condition: used, SIPA horizontal drilling machine Prsdpszvm Iqofx Abujc

Condition: used, Offered is a horizontal boring machine. Equipped with a rotary clamping table with T-slots, horizontal boring and milling spindle head, large vertical faceplate with clamping slots, mechanical control levers and handwheels, as well as an additional clamping surface with T-slots. Inspection possible by arrangement. Podpj Afpk Djfx Abuerc

Condition: used, Horizontal drilling machine with 4 spindles Prsdpfjzxg Dqox Abuec

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, STANGO Paper drill Drill heads 4 Min / Max 40 - 250 mm Drill diameter 2 - 10 mm Drill dept 60 mm Price under request Available immediately Psdpfs Agr N Tsx Abuerc More pictures and video is available.

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down Psdpfozr I H Tsx Abusrc - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 1970, condition: ready for operation (used), A horizontal boring and milling machine Scharmann is available. Spindle sleeve diameter: 120mm, travel X/Y/W: 1600mm/1600mm/600mm, speed: 1000rpm, table dimensions X/Y/Z: approx. 1200mm/1400mm, max. table load: 6000kg, column diameter: 220mm, table rotation: 360°, rapid traverse: 380mm/min, feed: 2400mm/min. Machine dimensions X/Y/Z: approx. 4500mm/2600mm/3000mm, weight: approx. 17000kg. Dokumentation vorhanden. An on-site inspection is possible. Prsdjxyk Tlopfx Abuoc

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Prsdpfx Aozwfqysbuoc

Year of construction: 2000, condition: used, machine/vehicle number: 001119, SECOND-HAND MULTIPLE HORIZONTAL AND VERTICAL DRILLING MACHINE COMEC MOD. FOV/3+CA - CE RULES - N. 2 horizontal boring units - N. 1 Vertical boring unit - Automatic loader - Volt. 415/50 - S/N 001119 - Year 2000 Prsdpfjqmi Epsx Abuec

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available. Prsdpfx Abot Hkh Ajusc

Year of construction: 1995, condition: like new (used), table height adjustment engine power 2.2 kW 2800 rpm Prsdpfx Ajg E Uqrobujc 2 suction connections, 100 mm power supply 400V

Condition: used, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Year of manufacture: 2014 Colour: Grey Empty weight: 6.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 Podpfx Ao Af Uu Uebuorc - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Door interlock switches, Safety light curtain, Bumper guard, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 300 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - Table length [mm]: 5200 - Table width [mm]: 1300 - Working range X [mm]: 6350 - Working range Y [mm]: 1300 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 7033 - Y-axis maximum stroke [mm]: 1940 - Z-axis maximum stroke [mm]: 475 - Voltage [V]: 400 - Current consumption [A]: 64 - Installed length [mm]: 11000 - Installed width [mm]: 3900 - Installed height [mm]: 3000 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, A versatile horizontal end borer that can be used for a variety of drilling operations in solid wood furniture components. Optionally the machine can be equipped with a tilting table. -3hp motor - 2800rpm -Drilling unit advancement via hydrocheck unit. -Drilling head with 5 drills which can be rotated through 360 degrees. -Drill interaxis 3 x 32mm ctres / 3 x 20mm ctres. -Max drilling depth 70mm. -Drill connection M10 Podpfjymnk Nox Abusrc -Height of drill head and drilling depth adjustable via screws with Siko mechanical digital readouts. -Table with adjustable reference fence adjustable to 45 degrees with pneumatic workpiece clamp. -CE safety protections

Condition: good (used), Year of construction: 2006, CNC machining center - horizontal Manufacturer: HELLER Machine model: MCH 250 Control: Siemens 840 D – Powerline Year of construction: 2006 TECHNICAL DATA - X-axis mm 800 - Y-axis mm 800 - Z-axis mm 800 Travel range along the center of the table, X-axis mm +400 to -400 Travel range vertically above the pallet clamping surface, Y-axis mm +120 to +920 Travel range transversely to the center of the table, Z-axis mm +150 to +950 Feed forces - X-axis at ED S3 – 40% N 15000 - Y-axis at ED S3 – 40% N 15000 - Z-axis at ED S3 – 40% N 17500 Speeds - Feed rate in X, Y and Z axes mm/min 1-50000 - Rapid traverse speed mm/min 50000 - Acceleration in X, Y and Z axes m/s² 4.0 - B-axis (360 x 1° rotary table) max. speed 1/min 25 Rotary table - Division degrees 360 x 1 - max. permissible clamping weight daN 800 - Max. tangential moment Nm 20000 - max. tipping moment Nm 18000 Spindle - Speed range 1/min 45 – 6000 - Tool holder DIN 69893 HSK 100 Form A - Motor Three-phase spindle motor - Drive power max. at the spindle at ED S1 - 100% kW 40 -- at ED S6 - 40% kW 60 -- at ED S6 - 25% kW 70 --- from speed 1/min 500 - Torque max. at the spindle at ED S1 - 100% Nm 765 -- at ED S6 - 40% Nm 1145 -- at ED S6 - 25% Nm 1340 -- up to speed 1/min 500 Tool magazine - Magazine type Rack - Magazine places incl. 2 x 7 setup positions 405 places - Magazine places for max. tool diameter 23 places Pallet changing device - Pallet size mm 630 x 630 - Workpiece dimensions: Swiveling diameter in the working area x height mm Ø900 x 1000 - Pallet changing accuracy in X, Y and Z axes mm 0.01 - Pallet changing time at 500 (800) daN s 12 (14) - Rotary storage RSP 4-fold - Pallets in the system, number 6 EQUIPMENT FEATURES + Coolant system ++ with vacuum rotary filter - high pressure 50 bar (Knoll VRF 250) ++ Coolant tank capacity l 1500 ++ Coolant pump 3 bar flow rate l/min 170 ++ Coolant pump 2 bar flow rate l/min 40 ++ High-pressure pump 70 bar flow rate l/min 22 + Chip removal ++ Conveyor spirals in the machine bed number 2 ++ Diameter mm 160 ++ Transverse chip conveyor ++ Conveyor speed m/min 1.5 ++ Discharge height mm 1200 + Rotary storage RSP 4-fold + Pallets in the system, number 6 Prjdpfx Aj Agvffjbujc + Integrated tool monitoring IPM + Drill breakage control + Measuring probe Renishaw + Status lamp 3 colors + Remote diagnostics via modem Machine weight daN 19000 Space requirement basic machine L x W x H approx. m 6.3 x 4.9 x 4.0 Power requirement basic machine kVA 85 Maximum power requirement (including all options) kVA 131 Subject to changes and errors in technical data and specifications.

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Pedez Iarqopfx Abujrc Type BS 65 Spindle diameter 65 mm Table dimensions approx. 600 x 1000 mm X / Y / Z = 1000 / 800 / 650 mm

Condition: new, Year of construction: 2025, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, workpiece length (max.): 60 mm, number of axes: 3, controller manufacturer: ISAC, actuation type: electric, overall weight: 2,750 kg, Equipment: CE marking, documentation/manual, GO! 1300M CNC DRILLING MACHINE Pjdpfxjy Nyypj Abuorc OPD201001 HSD Spindle Motor 5,5 kW - ER32(Manual) OPD201100 HSD Boring Unit - 17 Tools Capacity OPA0032 AES Wop CAD/CAM Program OPA0710 HSK F63 ER32 Tool Holder OPD201900 Go! Seaway Packaging System OPD201831 GO! HMI - English Interface

Condition: excellent (used), Year of construction: 1987, max tool diameter: 16mm max hole depth: 160mm max milling length: 160mm front/rear drilling apparatus adjustment working table dimensions: 620x280mm Predpfx Ajqwdxxebuoc table rotation angle: +20˚ adjustment of table up/down and sideways material pressure motor power: 1,5kW dimensions L/W/H: 1100x650x1200mm weight: 280kg

Condition: excellent (used), Year of construction: 2019, 2019 Starrag NB251 CNC Blisk Horizontal 5 Axis Simultaneous Machining Centre With Siemens 840D Control Maximum Blisk Ø750mm. Axis Travel 'X'=700mm, 'Y'=400mm, 'Z'=400mm, 'A'=360° (Endless), 'B'=± 87°. Rapid Traverse 'X'=62m/min, 'Y'=62m/min, 'Z'=62m/min, 'A'=200rpm, 'B'=60rpm. Maximum Spindle Speed 18,000rpm (28kW Motor), Torque at 100% Duty 181Nm. Spindle Taper HSK-A63. 62 Position ATC. Maximum Tool Ø150mm, Maximum Tool Length 250mm, Maximum Tool Weight 6.5kg. Tool Change Time Double Gripper 8sec. S/No. 8404 (2019). Pjdpfxez Dg Tao Abusrc With Knoll Through Coolant Paper Filtration System, Knoll 450-K1 Chip Conveyor, Blum Laser Tool Setter, Renishaw Spindle Probes, Starrag Chiller Unit, Wash Gun, Swarf Bin, Handwheel & Manuals. Overall Dimensions L5,000 x W3,260 x H3,200mm. Weight 12,000kg.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Travel ranges: X = 1000 mm, Y = 850 mm, Z = 950 mm Podpfxoz Ri I Uo Abuorc Horizontal milling and drilling operations Multi-sided machining in conjunction with a rotary table as the 4th axis Dual pallet changer, 2 x 630 x 630 mm 100-position tool changer, automatic workpiece measuring probe Glass scales in all axes, laser tool measurement SK 40 with 10,000 rpm and 40 bar internal coolant

Condition: refurbished (used), Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Pedpfjzlbrvjx Abusrc Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Prodpfx Ajxwaz Hebuec