Used Horizontal Wrapping Machine for sale (66,058)

Condition: reconditioned (used), QUASER MV204 CNC Vertical Machining Centre Year 2016 Control FANUC 31i-B Table size 700 x 1400 mm Table load 1800 kg Travels XYZ 1270 x 700 x 610 mm Spindle nose to table 150 - 750 mm Spindle speeds to 12000 rpm Spindle taper BT 40 Spindle motor TBC Number of tools 30 ATC Rapid traverse X, Y, Z 36 m/min Weight 10100 kg Bedpfxszzymko Adhslp Supplied with: Swarf Conveyor, Spindle Chiller, Filtermist FX7002, Tooling Package. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27001 Machine Serial Number: 113L160588 Cost: £34,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2016, operating hours: 36,629 h, functionality: fully functional, machine/vehicle number: 196091, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 560 mm, feed length Y-axis: 560 mm, feed length Z-axis: 625 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Okuma, controller model: OSP-P300M, workpiece weight (max.): 400 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,420 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 9,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 22,704 h, coolant supply: 50 bar, spindle motor power: 26,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a used Okuma MB-4000H, a 4-axis CNC horizontal machining center, manufactured in 2016 (produced in June 2016), in good condition. Manufacturer: Okuma Model: MB-4000H Serial number: 196091 Year of manufacture: 2016 Condition: used, good condition Key specifications: - CNC control: Okuma OSP-P300M Bede Ad Rclspfx Adholp - X/Y/Z travels: 560 / 560 / 625 mm - 2 pallets, 400 x 400 mm, with automatic pallet changer - Maximum pallet load: 400 kg - B-axis: NC table with 0.001° indexing - Spindle: BT40, 15,000 rpm, power 26 / 18.5 kW (30 min / continuous) - Rapid traverse rates X/Y/Z: 60 m/min - Automatic tool changer with 60 positions - Coolant through spindle with high-pressure pump - Tool wear/breakage monitoring probe - Power supply: 400 V - 3-phase - 50 Hz, 42 kVA - Approximate weight: 9,500 kg; approximate footprint: 2,420 x 4,700 x 2,650 mm Machine hours recorded (09/29/2026): - CNC on: 45,737 h - Operating: 36,629 h - Cutting time: 17,380 h - Spindle active: 22,704 h Accessories, tools, and tool holders: to be agreed upon. Complete technical data sheet with photos available upon request. Available for viewing by appointment. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, BENHIL 8380 Butter Filling and Wrapping machine for 250gr Current Format | IN STOCK Benhil 8380 Butter Filling and Wrapping Machine Machine Benhil 8380 Capacity up to 80 packets/min (4.800 p/h) Pack size 250 gram Dimensions 100mm x 75mm x 35mm Product Butter, margarine, etc. Wrap material Aluminium foil or parchment paper in reels. Weight 2.000 kg (gross) Dimensions Approx. 200 x 150 x 200 cm (l x w x h) Electricity 2,2 kW Condition ‘’as is’’ Good Condition (Complete) Bledpfx Aszbg Eujdhjp Price fully refurbished: Ask for Quote

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Bedpeyw H Rkefx Adhelp Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Blodoy Iwdpopfx Adhep Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Type W 320 AZ – 6 Year of manufacture 1995 Bsdpfxj Aa Iibj Adhjlp Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10160, travel distance X-axis: 800 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 805 mm, rapid traverse X-axis: 38 m/min, rapid traverse Y-axis: 38 m/min, rapid traverse Z-axis: 38 m/min, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 17,000 kg, number of slots in tool magazine: 180, tool length: 600 mm, tool diameter: 250 mm, tool weight: 35,000 g, STARRAG HECKERT CWK 500 Horizontal Machining Center - Tool holder: HSK A 100 - Min. distance from the front edge of the working spindle to the center of the pallet: 150 mm - Min. distance from the center of the working spindle to the top edge of the pallet: 100 mm - Max. permissible height of workpiece and clamping devices for changing the work area: 900 mm - Workpiece side (pallet) with hole grid according to DIN 55201, clamping surface: 500 x 500 mm - Max. load per pallet (centered): 800 kg - Guide bore diameter: 20 H6 - Centering bore diameter: 50 H6 - Number of mounting threads: 23 x M12 Bjdj Afnc Ejpfx Adhelp - Distance of the guide bore to the center of the table: diameter 200 +- 0.013 mm - Interference circle diameter: 800 mm - Max. table rotation: 18 rpm - Automatic pallet changer - Pallet changer with rotating setup station - max. pallet change time: 10 sec - Pallet change time with clamping hydraulics: min. 12 sec - Feeds: X/Y/Z axis: continuously adjustable working feed range: 1 - 38,000 mm/min - Working spindle diameter in the front bearing: 100 mm - Max. tool diameter with free neighboring positions: 250 mm - Max. tool diameter for bridge tools: 500 mm - Max. tool diameter with occupied neighboring positions: 125 mm - Tool overhang length: 600 mm - Max. tool weight: 35 kg - Average tool weight with full occupancy: 10 kg - Max. imbalance in the tool magazine: 100 kg - Number of pallets: 2 With Balluff system, technical documentation, with RENISHAW 3D measuring probe, including 30 HSK 100 tool holders, mostly equipped with tools. Transport: The machine can most likely be transported on a truck with a width of up to 3000 mm. FCA D-01445 Radebeul - loaded onto a truck

Condition: excellent (used), Year of construction: 2004, Year 2004 With 8 station Fastem pallet loading system with tombs Tooling & manuals 12,000rpm 40 ATC DIN40 / Renishaw probing Pallet size 400mm x 400mm Bedpfx Adozxr Twoholp

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Bjdpfx Asyrf I Aodhslp Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, travel distance X-axis: 8,500 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 320 mm, nominal power (apparent): 8 kVA, workpiece length (max.): 8,500 mm, total height: 3,100 mm, total length: 11,500 mm, total width: 3,000 mm, rotational speed (max.): 15,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 15,000 rpm, spindle motor power: 5,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, Elumatec SBZ 130 CNC 3-axis steel processing center, TOP condition Processes steel, stainless steel, aluminum, PVC, etc. The machine can mill, drill, tap, cut, and notch. All machining operations are performed while the profile is stationary. 8-position tool changer on a turret. Max. milling cutter diameter: 80 mm Blsdpsziy Idofx Adhop Max. disc cutter diameter: 200 mm Tools and accessories, including special wrenches, as shown in the picture. Tool holder: BT 30 Max. machining length: 850 cm, with stringer-side machining: 838 cm, y-axis: 48 cm, z-axis: 320 cm Year of manufacture: 2010, spindle speed: 15,000 rpm, spindle power: 5.5 kW Weight: approx. 6 tons. Includes laser and partition, protective mat, machining accuracy: x-axis, y-axis, z-axis +/- 0.1 mm Air consumption: approx. 75 liters, with spray nozzles. Inspection is possible by appointment. The machine is located in 91629 Weihenzell.

Year of construction: 2011, condition: good (used), Pallet wrapper, stretch wrapping machine for pallets, Strema, H 1300 – used: Price ex works: €2,950 (net), including loading! Unit 2: Manufacturer: Strema Bljdpfx Adez Sd A Djhep Type: H1300 Year of manufacture: 2011 Machine number: 23655 Turntable diameter: approx. 1.60 m The unit is installed in the floor of the hall, so no ramp or similar is required. Column height: approx. 2.70 m 3 x 400 V, N, PE, 50 Hz, 1.3 kW Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Bledpfxeywicvo Adhsp

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 255179729, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, nominal power (apparent): 74 kVA, torque: 525 Nm, controller manufacturer: Mazak, controller model: 640M, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 1,500 kg, total height: 3,200 mm, total length: 6,400 mm, total width: 2,600 mm, table width: 630 mm, table length: 630 mm, table load: 1,500 kg, overall weight: 19,700 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, spindle nose: BT 50, number of spindles: 1, number of slots in tool magazine: 80, mount diameter: 50 mm, tool length: 500 mm, tool diameter: 420 mm, tool weight: 30,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, TECHNICAL DETAILS Operating condition Condition: fully functional Inspection: possible under power after prior arrangement Table and swivel axis Table design: swivel axis Division of swivel axis: 1/360° Machine dimensions Length: approx. 6,400 mm Blodpfxjz R A Ibe Adhep Width: approx. 2,600 mm Height: approx. 3,200 mm Coolant system Tank volume: approx. 800–900 l Tank length: 1,800 mm Tank width: 800 mm Tank height: 650 mm Pallets Number of pallets: 2 pcs. Pallet dimensions: 630 × 630 mm EQUIPMENT Tool holders External coolant drum filter tank Renishaw MP10 measuring probe system Grid frame in front of the machine, partially mobile 2 pallets, 630 × 630 mm

Condition: used, Wenzel RS 1012 CNC 3D Coordinate Measuring Machine The Wenzel RS 1012 is a CNC 3D coordinate measuring machine (CMM) with a horizontal arm design, intended for the precise measurement of medium to large-sized workpieces such as components and assemblies. The machine concept is based on a stable cast iron or granite base plate serving as a measuring table, with a guide system attached to the side, which allows for open loading from three sides. Technical Key Components & Specifications Machine Type: Horizontal Arm 3D Coordinate Measuring Machine (CMM) Manufacturer: WENZEL Präzision GmbH Model / Year of Manufacture: RS 1012 / 2002 Serial Number: 023116 Measuring Volume (X/Y/Z): 2,000 mm × 1,000 mm × 1,200 mm Probing System: Renishaw PHC10-3 PLUS (interface/controller for motorized rotary/swivel head PH10) Design: Horizontal Arm Measuring Machine (Column Measuring Machine) with integrated base plate Measuring Accuracy (MPE): 15.0 μm + (L / 45.0 mm, total maximum length measuring error in the measuring range is approximately 50.0 micrometers) Sensor System (Standard Configuration): Delivery without PC Key Features of the RS Series Bedjzz Hywepfx Adhelp High Flexibility: The machine generally does not require a special foundation and can be flexibly integrated into existing production and laboratory spaces. Unrestricted Accessibility: Due to the side-mounted guide of the horizontal arm, the measuring table is freely accessible, which facilitates the loading of heavy workpieces by crane or forklift. Multisensor Technology: In addition to tactile probing systems (such as the TP20), the series can often be equipped with optical line lasers or scanning sensors by the manufacturer. "One-stop shop: We would be happy to offer you suitable financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Bledsz Inapopfx Adhop Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: good (used), Year of construction: 2017, functionality: fully functional, Brüninghaus / Fromm / Siat WS 165 NOW pallet wrapper in fully functional condition, manufactured in 2017: Turntable diameter: 165 cm Overall height: 241 cm Pallet height: 210 cm Pallet weight: 2,000 kg Bsdpfxezpv Igs Adhslp The access ramp can be attached at the front, left, or right. The WS 165 NOW can be programmed with 10 different programs for individual products and pallets. The machine has 5 different operating modes: - Automatic mode, upward only, as well as up and down - Automatic mode, upward only, as well as up and down with a pause for a pallet top sheet - Manual mode The motor cover (see picture) is only loosely placed and is not attached. Shipping via a freight forwarder is possible after consultation. #8553

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Bjdpfx Adez Inavohslp Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Bedpfe Aax U Iex Adholp Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, and fully functional – ready for operation. ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Kombinat “Fritz Heckert” • Weight: approx. 1,700 kg • Work table: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1800 rpm • Power supply: 3x380 V / 50 Hz • Power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse 25 A • Mechanical and automatic feeds in all axes ✔ Equipment: • Robust machine vice on the table • Work light • Cooling system • Complete control panel with adjustment wheels and feeds ✔ Advantages: • Very stable, heavy-duty construction (1.7 tons) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for its durable machines • Fully functional and complete – ready for immediate use • 1000 mm table – allows for machining of larger parts This machine is reliable; it is not a lightweight, cheaply made Chinese product – it is a classic from a time when equipment was built to last. Bjdpsz Slfmjfx Adholp

Condition: excellent (used), Year of construction: 2014, operating hours: 56,100 h, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840 D sl, table width: 500 mm, table length: 400 mm, table load: 500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,310 h, spindle nose: HSK-A 63, number of slots in tool magazine: 42, Equipment: chip conveyor, Horizontal Machining Center We offer you: Manufacturer: Starrag Heckert Model: HEC 400 D Year of manufacture: 2014 Control system: Siemens 840D sl Operate Technical Specifications: Travel ranges: X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 680 mm Main spindle: Speed range: 8,000 rpm Tool holder: HSK-A 63 NC swivel rotary table: Number of tables: 2 Table clamping surface: 400 x 500 mm Max. table load: 500 kg Tool changer: Number of tool positions: 42 Operating hours: approx. 56,100 h Spindle hours: approx. 5,310 h Blodpfx Ads Agr Nhjhep Technical Features & Accessories: - IKZ - Paper belt filter - Chip conveyor - 2 pallets There are 3 identical machines available. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Camam horizontal and vertical double mortising machine Blsdpfx As Ahgp Aedhop

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2018 Machine No.: 2080519 Control: Siemens SINUMERIK Machine type: CNC horizontal twin-spindle machining center Country of origin: Germany Technical Data Bjdpfx Adjzypmqehelp Working travels: X-axis: 600 mm Y-axis: 600 mm Z-axis: approx. 400–500 mm* Number of machining spindles: 2 Spindle arrangement: horizontal, twin spindle Spindle distance: 600 mm Maximum spindle speed: 17,500 rpm Tool holder: HSK-A63 Spindle power: up to 2 x 35 kW* Spindle torque: up to 2 x 80 Nm* Rapid traverse X/Y/Z: up to 100 m/min* Automatic tool changer: Yes Tool magazine: up to 84 positions / 2 x 42 tools* NC rotary/swivel workholding system Automatic workpiece changing/loading system Automation / Equipment Industrial robot for automatic loading and unloading Complete safety enclosure Automatic workpiece handling system NC-controlled rotary/swivel workholding Twin-spindle simultaneous machining Automatic tool changer KNOLL coolant filtration system High-pressure coolant system Chip evacuation system Central coolant supply Siemens operator panel CE marking Electrical Data Operating voltage: 3/PE / 400 V / 50 Hz Full-load current: 190 A Pre-fuse: 200 A Pneumatic pressure: 7.0 bar Air consumption: 1.0 Nm³/min Electrical diagram No.: 205-000-20678-97 Weight Machine weight: approx. 16,000 kg Nameplate specification: 160 kN Description SW BAW06-22 CNC horizontal twin-spindle machining center, manufactured in 2018. The machine is designed for highly productive simultaneous machining with two horizontal machining spindles. Equipped with Siemens SINUMERIK CNC control, HSK-A63 spindle interface, high-speed spindles up to 17,500 rpm, automatic tool changing system and NC-controlled rotary/swivel workholding. The machine is integrated into an automated production cell with industrial robot for automatic workpiece loading and unloading. The machine is additionally equipped with a KNOLL coolant filtration system, high-pressure coolant supply, chip management system and complete safety guarding. Made in Germany.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25SFERA08, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Bodpfx Ajz Ipdcodhelp Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Condition: used, Year of construction: 2016, machine/vehicle number: 405329, Submitting a bid obligates you to collect the item on time, no later than December 23, 2026! Bledpfxe Agvque Adhep Auction of a Beck MP 240X! Note: Accessories are sold as is, without warranty. The following applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. Bodpfx Aoz Adt Rsdhslp The machine can be viewed while powered on by prior arrangement.