Used Hsm V Press 605 for sale (63)

Condition: defective spare-parts repository (used), Year of construction: 2013, Manufacturer: HSM Tip: HL 4010 Li Year of construction: 2013 The equipment is incomplete and is sold as a part Fault: Hydraulic pump missing Control is missing Power supply unit missing Iedpeur Ravjfx Afhebb

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Price ex works: only €2,950 (net) Manufacturer: HSM Type: 225.1 VL Year of manufacture: 1999 Ijdpfx Afozbygfohsbb Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Condition: good Available: from Q4/2026 Location: Hamburg

Condition: ready for operation (used), Year of construction: 2003, Baling press Hsm 500.2 vl Fourfold wire tying of bales Bale dimensions (L x W x H, mm): 1200 x 800 x 1000 - 1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Filling opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Iedpfx Asra Ak Eofhsbb Power supply (V): 400 (three-phase) Vertical baler Hsm V press 500.2 VL Year of manufacture: 2004-2008 Price: 3,500 EUR Transport height: 2600 mm

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Ibedoyuyg Sspfx Afhjb Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, pressing force: 4 t, bale length: 500 mm, bale width: 700 mm, bale height: 450 mm, bale weight: 50 kg, HSM 45 VL – Technical Data Ibedpfxswuk Nrj Afheb Feature Value Pressing force approx. 44 kN (4.5 tonnes) Motor power / Power supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Idle cycle time approx. 23 seconds Throughput (theoretical) approx. 38 m³/h (3–6 bales/hour) Press chamber (W × D × H) 700 × 500 × 940 mm Feed opening (W × H) 700 × 600 mm Max. bale size (W × D × H) 700 × 500 × 450 mm Bale weight approx. 30–50 kg Machine dimensions (W × D × H) 840 × 720 × 2085 mm Feed height 500 mm Machine weight approx. 374 kg

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler Ibjdpfora Nrmjx Afheb pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: ready for operation (used), Baler Hsm vk 42/1200 fully automatic Pressure force: 42 tons Beam dimensions: 700 x 800 x 600 - 1200 mm Beam weight: approx. 450 kg Press length approx. 7 meters Iodera Nrxspfx Afhebb press weight approx. 6000 kg tying 4 x wire automatically

Condition: ready for operation (used), Manufacturer: HSM Model: VL 155.2 Dimensions (WxDxH): 1450 x 926 x 2400 mm Pressure: 16 t Filling opening: 1100 - 590 mm Filling space - 1100 - 700 x 1130 mm Bale size: 1100x700x950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Drive power: 4 kW Rated current: 8.5A Binding: 4-fold vertically Vertical capacity: 4 - 8 bales/hour Ibjdpfx Afjv Ai Tgshsb Machine weight: 940 kg Year 2001-2005

Condition: excellent (used), Year of construction: 2021, operating hours: 1,118 h, functionality: fully functional, HSM baling press, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Operating hours: 1118 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: Iodpfxezvluvj Afhsbb All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Ibsdszuy Aropfx Afheb Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2017, operating hours: 432 h, functionality: fully functional, HSM baling press, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Ibodpfx Afszt N Afehob Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Year of construction: 1987, condition: used, Press force: 10t, loading aperture dimensions X/Y: 580mm/900mm, bale width/height: 500mm/600mm, bale weight depending on material: approx. 100kg, motor power: 6.8kW, Control system: Siemens SIMATIC S5-100U. Machine dimensions X/Y/Z: 4700mm/1000mm/1540mm, weight: approx. 1200kg. The machine has been overhauled and is in good condition. Documentation available. An on-site inspection is possible. Iedpfx Aszybumofhsbb

Condition: used, Year of construction: 2013, Manufacturer: HSM Type: HL 4010 Li Ibodjzxzxcspfx Afhob Year of manufacture: 2013 Pressing force: 40 t

Condition: used, Year of construction: 2018, Bale press and performance data Pressing force: 480 kN Specific pressing force: 58 N/cm² Drive power (motor): 11 kW Voltage/frequency: 400 V / 50 Hz (three-phase) Cycle time in idle mode: 35 seconds Theoretical throughput in idle mode: 32.81 m³/h [1] Bale and loading dimensions Maximum bale weight: up to 420–430 kg (depending on material and density) Iodpozxzw Ejfx Afhjbb Bale dimensions (L x W x H): 1200 x 1100 x 750 mm Feed opening (W x L): 1020 x 900 mm (ideal for large boxes) Binding method: manual, with 4-fold wire wrapping Net weight of the machine: 5900 kg (5.9 tons)

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2015 Pressing force: 40 t Iedpszxzv Uofx Afhsbb

Condition: used, Manufacturer: HSM Type: HL 4010 Re Ibedpfx Aozxqr Eefhob Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Year of construction: 2015, Manufacturer: HSM Type: HL 4010 Re Ibsdpezxqpdofx Afhsb Year of manufacture: 2015 Pressing force: 40 t

Condition: used, Manufacturer: HSM Type: HL 4010 Re Iedpfxezxqnms Afhebb Year of manufacture: 2014 Pressing force: 40 t

Condition: used, Manufacturer: HSM Type: HL 4010 Re Year of manufacture: 2015 Ibjdpfxozxqmio Afhob Pressing force: 40 t

Condition: used, Year of construction: 2014, Manufacturer: HSM Isdpjzxqkzjfx Afhebb Type: HL 4010 Re Year of manufacture: 2014 Pressing force: 40 t

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: 6215.101.00001B, pressing force: 12 t, Our HSM 12 Gigant is in its element wherever bulky cardboard, plastic films, or other materials need to be compacted. Thanks to the extremely large loading opening, the device can be filled simply and conveniently. The result is compact bales that are easy to transport. And if the press is urgently needed in another area of the company – not a problem: Thanks to its 4 wheels, it can be used anywhere and at any time. Iedpow Az E Tefx Afhsbb

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: Powerline FA 500.3, HSM Powerline 500.3 The flagship model of the HSM Powerline high-performance document shredder series. This powerhouse is perfectly suited for shredding large quantities of documents in archives or central shredding facilities. Premium materials and HSM’s proven high manufacturing standards, "Made in Germany," ensure that the machine is safe and built to last. Specification Application: Archives / Central Offices Cutting type: Particle cut Cut width: 3.9 mm Particle length: 40 mm Security level (DIN 66399): E-3 | F-1 | O-3 | P-4 | T-4 Sheet capacity, 80 g/m²: 180 – 200 Cutting speed: 210 mm/s Throughput: 340 kg/h Drive power: 7.5 kW Voltage / Frequency: 400 V / 50 Hz Feed width: 500 mm Collection volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg Colour: Anthracite, Iron Grey, Light Grey Ibedpfxoy Anvro Afhsb Media to be shredded: Paper, staples and paper clips, credit cards, CDs/DVDs, USB sticks, crumpled paper, floppy disks, computer files

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of one bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Ibsdpfx Afsra Dddjhsb Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features large loading opening for cardboard option for automatic feeding (e.g., with a conveyor) manual wire tying (4 wires) pallet lock and hydraulic door for bale removal Advantages of this press large bales – fewer transports high crushing force designed for continuous operation Available model years: 2017-2020

Condition: ready for operation (used), Year of construction: 2012, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Year of manufacture: 2012 Isdpfox D U N Sox Afhobb

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 530001846, pressing force: 70 t, filling opening width: 1,020 mm, filling opening length: 900 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 600 kg, total width: 2,060 mm, total height: 2,394 mm, total length: 5,992 mm, type of input current: three-phase, input voltage: 400 V, input current: 19 A, overall weight: 7,500 kg, warranty duration: 3 months, noise level: 70 dB, pressure: 58 bar, transport height: 2,400 mm, pressure (max.): 70 bar, opening width: 1,020 mm, empty load weight: 7,500 kg, year of last overhaul: 2026, volume flow: 43 m³/h, operating pressure: 70 bar, transport width: 2,066 mm, transport length: 5,992 mm, protection type (IP code): IP54, input frequency: 50 Hz, tank capacity: 123 l, stroke length: 1,500 mm, Equipment: documentation/manual, FOR SALE: HSM HL 7009 Li hydraulic baling press Manufacturer: HSM Pressen GmbH, Germany Single-chamber horizontal baling press for waste, used Suitable for compacting/baling paper, plastics, PET bottles, municipal waste, etc. In the case of paper, suitable for logistical packaging for paper mills = waste valorization Pressing force: 70 tons (compaction ratio approx. 6:1) Motor: 11 kW, 3x400 V Overall dimensions of the machine/press: 580 × 290 × 300 cm (L × W × H) Bale dimensions: 120 × 110 × 110 cm (L × W × H), 1.5 m3, 650 kg, 1 bale = 1 pallet Bales can be stacked on top of each other Automatic bale ejection system onto pallets Easy bale tying with 4 strands of iron wire Machine/press weight: 7400 kg Ibjdpfx Aszmu Umefhob Year of manufacture: 2017 Both left-hand and right-hand models are available for optimal placement in the facility. The machine has been inspected and serviced, is leak-free, regularly maintained, and ready for use. 3-month warranty. Invoice provided, price excludes VAT. Transport: - Loading included in the price - Personal collection at Moravec 41, Žďár nad Sázavou district - Alternatively, truck transport can be arranged.