Used Hyundai Hl 770 for sale (164)

Condition: new, Year of construction: 2022, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Ltedpfxjxhbiaj Ah Usa Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 145A - New vehicle - Crawler excavator - Track drive - Rubber tracks - Without attachments - Radio - Operating hours: 16.9 - Engine 100 kW - Camera - Central lubrication system Errors and prior sale excepted. Internal vehicle number: W63 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: excellent (used), Year of construction: 2019, Control Siemens 828D shop mill Travel paths X/Y/Z 1,400/660/635 mm Lsdpfx Ahsv E Skme Uota Spindle speed 15,000 rpm Tool magazine for 30 tools HSK A-63 IKZ Renishaw measuring probe Chip conveyor

Condition: used, Year of construction: 2023, operating hours: 619 h, load capacity: 5,000 kg, lifting height: 5,962 mm, free lift: 1,617 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, empty load weight: 8,402 kg, total length: 3,040 mm, drive type: Elektro, construction width: 1,424 mm, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Front tire type: Superelastic Front tire size: 28x12.5-15 9.75 Rear tire type: Superelastic Rear tire size: 23x9-10 6.50F Battery voltage: 80V Battery capacity: 930Ah Battery manufacturer: IBV Battery year of manufacture: 2023 Fork positioner, Fork positioner Kaup 4.8T410Z Serial no. 891802 Fork positioner fully extended: 1980 mm fork spacing (AK/AK), fully retracted: 540 mm fork spacing (AK/AK) Heater, full cabin, Rear blue spot, fingertip control, full cabin with heater, discharge indicator with counter, LED lighting Ljdpjvdvrxofx Ah Ujta

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 24000 Spindle motor power 33/25 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 1000 mm Z-Axis Rapid Traverse 50 m/min X-Axis Rapid Traverse 50 m/min Y-Axis Movement 560 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 450 mm Ltodjx D Ezxopfx Ah Uea Table Table load 800 kg Tools Number of index 24 This 5-axis Hyundai Wia Hi-MOLD 560/5A vertical machining centre was manufactured in 2014. It features a table size of 1,250×600 mm, a maximum load capacity of 800 kg, and a high-speed spindle with 24,000 RPM and 33 kW power. The machine offers rapid feed rates of 50 m/min in all axes and a quick tool change time of 5.5 seconds. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia Hi-MOLD 560/5A machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2019, operating hours: 6,090 h, Year of manufacture: 2019 Drive: Wheel Empty weight: 19.000 kg Lodpex Hgqpofx Ah Ujta Dimensions (LxBxH): 876 x 250 x 342 cm Digging depth: 5.9 m

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse Ltsdsw Dcdyjpfx Ah Uea • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: new, Year of construction: 2023, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai HX 220AL - New vehicle - Crawler excavator - Track drive - Without attachments Ltsdpfx Ahexhbhvo Uja - Radio - Operating hours: 15.7 - Engine: 129 kW - Camera - Central lubrication system Subject to errors and prior sale. Internal vehicle number: W64 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Ledpowv Hq Isfx Ah Uota Chip conveyor

Condition: used, Year of construction: 2018, operating hours: 3,240 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, empty load weight: 3,950 kg, total length: 3,330 mm, drive type: Elektro, construction width: 1,120 mm, Electric 4-wheel forklift Ltjdpfx Aevdvrroh Uea Load center: 500 Mast type: Triplex Front tires type: Superelastic Front tires size: 200/50-10 Rear tires Type: Superelastic Rear tires Size: 16x6-8 Battery Volt: 48V Battery Ah: 750Ah Battery manufacturer: IBV Battery year of construction: 2018 Sideshifter, integrated sideshift 55C-A609 K1801187R3-046 Front work lights,

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 23500 Ltjdpox D N R Rjfx Ah Usa Main Drive Spindle speed range 8000 Spindle motor power 22 kw Number of axis 3 Movement X-Axis Movement 2450 mm Y-Axis Movement 950 mm Z-Axis Movement 850 mm Table Outer length 2700 mm Outer width 950 mm Table load 4500 Tools Slots in storage 30 This 3-axis Hyundai Wia F 960M vertical machining center was manufactured in 2014. It features a large table size of 2700 x 950mm, capable of handling loads up to 4500kg. Equipped with a 22 kW spindle power and a maximum speed of 8000 RPM, it includes a 30-position tool magazine. If you are looking to get high-quality milling capabilities, consider the Hyundai Wia F 960M machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2012, operating hours: 5,925 h, Serial number: hhih0604cc000xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20243 Specifications: - 2012 model - 5925 Hours - 24060 kg - 107 kW - Machine width: 310 cm - Track width: 70 cm - Track controls - Rear hatch does not lock - Chassis should be replaced - Loose track plates - Gps - Excavator bucket - Hydraulic cleaning bucket can be included for an additional charge - Lights - Radio - Air conditioning/ac - Ready to deliver Description: We have a 2012 Hyundai Robex 235LCR-9 w/ Excavator bucket and gps for sale. The chassis should be replaced and the side hatch does not lock. Other than that, the machine works as it should according to the owner. But some additional costs must be considered. A hydraulic cleaning bucket can also be included for an additional charge. Ready to deliver Hours: 5925 Own weight: 24060 Ltedpsxdux Tefx Ah Uoa Total Weight: 24060 Width: 310 Kw: 107 Model: Robex 235LCR-9 m/ Graveskuffe og gps

Condition: new, Year of construction: 2025, machine/vehicle number: 20250605009, fuel type: diesel, motor manufacturer: Hyundai DP222LC, General information Field of application: Construction Weights Empty weight: 6.185 kg Functional Generator capacity: 825 kVA CE mark: yes Other information Fuel consumption: 119 Liter / Hour at 75% Load Ltsdoxivr Eopfx Ah Uea Generator: Leroy Somer TAL-A49 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1090 l Transport dimensions (LxWxH): 4,808x1,95x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP222LC / Doosan DP222LC

Condition: used, Year of construction: 2021, operating hours: 548 h, Equipment: all wheel drive, PLEASE NOTE: Vehicle location is 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be arranged in advance without exception. Hyundai Robex 35 Z-9A - Incl. tilting bucket - Rubber tracks - Radio - Operating hours: 867 Subject to errors and prior sale. Internal vehicle number: W12 Ltodpfx Aoxiunxsh Uja

Condition: used, mileage: 158,000 km, power: 110 kW (149.56 HP), first registration: 01/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,500 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Quick & easy contact with our sales advisor. Attention!!! Sale preferably to commercial customers. Internal ID Number: [ 2989 ] ----Optional add-ons: * 12–64 month warranty (valid throughout the EU) * New inspection * New TÜV & emissions test (AU) * Nationwide delivery * Financing available, also with no down payment * Reversing camera/tow bar can be retrofitted on request! ----Vehicle highlights: * 19% VAT deductible * German vehicle * Regularly serviced * 2nd owner * Euro 5 emissions standard * High roof + long wheelbase (L2-H2) * Air conditioning * Cruise control * Towing capacity = 3,000 kg * Ready for immediate use Further equipment: Overhead storage compartment in cab, driver airbag, exterior mirrors with integrated indicators, 100 Ah battery, 105 Ah battery, on-board computer, brake pad wear indicator, driver assistance system: emergency braking assist, windscreen with upper band filter, 130 A alternator, rear wing doors (opening angle 180 degrees), body/build: standard high-roof van, black radiator grille, cargo partition wall without window, steering column (steering wheel) adjustable in height and reach, engine 2.5 L – 110 kW CRDi CAT, radio preparation, 2 speakers, wheelbase 3,435 mm, tyre repair kit, particulate filter, low emissions compliant with Euro 5, right-side sliding door (cargo/passenger compartment), front and rear mud flaps, driver’s seat height adjustable, seat cover/upholstery: fabric/artificial leather, seats in cab: dual passenger seat, start/stop system, 3 x 12V sockets in cab, electronic immobiliser, central locking with remote control, permissible gross weight 3.5 t Looking for leasing or financing? We offer attractive deals – also possible with no down payment! Please feel free to contact us. Contact: Phone: E-mail: Lodpewzrdqofx Ah Uota Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typographical mistakes, and prior sale excepted. The binding condition of the vehicle is defined exclusively in the purchase contract on site or through written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Condition: ready for operation (used), travel distance Z-axis: 635 mm, feed length X-axis: 1,060 mm, feed length Y-axis: 510 mm, controller manufacturer: Fanuc, total height: 2,800 mm, total length: 3,000 mm, total width: 2,400 mm, empty load weight: 7,000 kg, rotational speed of tool magazine (max.): 10,000 rpm, met koeling door spindel met spaantransportband met Kitagawa 4e as Ltsdpsxadmrefx Ah Usa Table dimensions: 1200 x 500 mm Admission in spindle (ISO): BT 40 Power on the spindle: 15 kW Toolchanger: yes Number of toolholders: 30 positions

Condition: ready for operation (used), Year of construction: 2014, General Data Machine weight 18000 kg Main Drive Spindle speed range 20000 Number of axis 5 Movement X-Axis Movement 650 mm X-Axis Rapid Traverse 50 m/min Y-Axis Movement 765 mm Y-Axis Rapid Traverse 50 m/min Z-Axis Movement 510 mm Z-Axis Rapid Traverse 50 m/min Table Table load 500 kg Tools Slots in storage 30 This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine. Application Types Milling Lodpex D Ez Ejfx Ah Usta

Year of construction: 2016, operating hours: 9,234 h, condition: good (used), machine/vehicle number: HHKHK901AG0000036, A/c Cab - monoboom - check security valves - hammerlines - rear camera - std. bucket Ledpfen D Hx Sox Ah Ujta

Condition: new, Year of construction: 2025, machine/vehicle number: 20241119012, fuel type: diesel, motor manufacturer: Hyundai P086TI, General information Field of application: Construction Weights Empty weight: 2.364 kg Functional Generator capacity: 220 kVA Ltodpsxl N Rasfx Ah Uea CE mark: yes Other information Fuel consumption: 31.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44M Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 224 l Transport dimensions (LxWxH): 3,51x1,13x1,75 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, Year of construction: 2023, Equipment: all wheel drive, ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance. Hyundai HX 235A LCR - New vehicle - Crawler excavator - Crawler drive - Without attachments - Radio - Operating hours: 18 - Engine: 129 kW - Camera - Central lubrication system Errors and prior sale excepted. Ledpfx Aoxhbitjh Ueta Internal vehicle number: W61 ATTENTION: VEHICLE LOCATION IS 66793 Saarwellingen. Viewings are only possible to a limited extent. Collection dates must be agreed upon in advance.

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 42,000 m/min, rapid traverse Y-axis: 42,000 m/min, rapid traverse Z-axis: 42,000 m/min, controller manufacturer: FANUC, controller model: i-Series, BRAND: HYUNDAI-WIA MODEL: F-600D CATEGORY: VERTICAL MACHINING CENTERS (ROTARY PALLET SYSTEM) YEAR OF MANUFACTURE: 2018 CNC CONTROL: FANUC i-SERIES MACHINE WEIGHT: 10,000 kg MACHINE DIMENSIONS: Length: 3,904 mm, Width: 3,970 mm, Height: 3,080 mm Spindle Spindle taper: ISO 40 Spindle speed: 8,000 rpm Spindle motor power (continuous/30 min): 15/18.5 kW Working Capacities X axis: 800 mm Y axis: 600 mm Z axis: 600 mm Distance spindle - table surface: 200 - 800 mm Distance between column and spindle center: 690 mm Table Table dimensions: 2 x (900 x 650 mm) Number of tables: 2 Table load capacity: 2 x 500 kg Table change time: 8.5 sec Feedrates Rapid feedrate (X/Y axes): 42,000 mm/min Rapid feedrate (Z axis): 42,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 30 stations Max tool diameter (adjacent/non-adjacent): Ø 90 / Ø 150 mm Max tool length: 300 mm Max tool weight: 8 kg Accessories Ltsdpfjxxl Egsx Ah Uja Chip conveyor Coolant collecting tank with pumps High-pressure coolant pump through spindle line Spindle line air conditioner Manuals, electrical schematics, and CE Declaration This model stands out among those you have provided as a Vertical Machining Center equipped with a Rotopallet system (two independent tables) and a very high rapid traverse rate of 42,000 mm/min.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,619 h, General Data Machine weight 10000 kg Control Unit Brand FANUC Model 21i MB Main Drive Lsdpox D R Htofx Ah Usta Spindle speed range 80 - 12000 Spindle motor power 11/7.5 kW Tool taper NT 40 Number of axis 3 Movement X-Axis Movement 800 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 42 m/min Table Outer length 2 x 900 mm Outer width 2 x 650 mm Min distance between vertical spindle and table 200 mm Max distance between vertical spindle and table 800 mm Table load 2 x 400 kg Tools Max weight 8 kg Max tool diameter 90 mm Max tool length 300 mm This 3-axis Hyundai Kia Hi-V600D vertical machining center was manufactured in 2011. Ideal for precision machining tasks, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Hyundai Kia Hi-V600D machine we have for sale. Contact us for more information. Application Types Milling

Condition: new, Year of construction: 2025, machine/vehicle number: 20250501001, fuel type: diesel, motor manufacturer: Hyundai P086TI-1, General information Field of application: Construction Weights Empty weight: 2.035 kg Functional Generator capacity: 165 kVA CE mark: yes Other information Fuel consumption: 26.7 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A44J Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Lsdsw Sc Dujpfx Ah Uota Water tank volume: 185 l Transport dimensions (LxWxH): 3,308x1,13x1,8 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P086TI-1 / Doosan P086TI-1

Condition: new, Year of construction: 2022, Equipment: all wheel drive, ATTENTION: Vehicle location is 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance. Hyundai Robex 35 Z-9A - New machine - Without attachments - Rubber tracks Ltedpfxexiul Re Ah Usa - Radio - Operating hours: 8 Subject to errors and prior sale. Internal vehicle number: W36 ATTENTION: Vehicle location is 66793 Saarwellingen. Inspections are only possible to a limited extent. Collection appointments must be arranged in advance.

Condition: new, Year of construction: 2025, machine/vehicle number: 20250320030, fuel type: diesel, motor manufacturer: Hyundai P126TI-II, General information Field of application: Construction Weights Empty weight: 3.254 kg Functional Generator capacity: 330 kVA Ledpjuq U Smsfx Ah Uota Other information Fuel consumption: 47 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 480 l Transport dimensions (LxWxH): 3,938x1,3x2,01 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai P126TI-II / Doosan P126TI-II

Condition: new, Year of construction: 2025, machine/vehicle number: 20250405005, fuel type: diesel, motor manufacturer: Hyundai DP158LC, General information Field of application: Construction Weights Empty weight: 4.600 kg Functional Generator capacity: 510 kVA Ltsdpjw Alurofx Ah Uea CE mark: yes Other information Fuel consumption: 72.9 Liter / Hour at 75% Load Generator: Leroy Somer TALA473B Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 775 l Transport dimensions (LxWxH): 4,008x1,8x2,35 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information Doosan is acquired by Hyundai infracore since 2021 what results in Hyundai brand name on all plates. Engines have remained the same. Hyundai DP158LC / Doosan DP158LC