Used Hyundai Robex 210 Lc 7 for sale (148)

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, table width: 500 mm, table length: 1,200 mm, Spindle speed 10.000 Rpm Coolant tank with IKZ 20 bar Chip conveyor X - Travel: 1060mm Y - Travel: 510mm Z - Travel: 635mm Table Length: 1200mm Table Width: 500mm Feed rate X-Axis: 20000mm/min. Feed rate Y-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 10000Rpm ATC / revolver: 24 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 2915mm Width: 2361mm Lrodpfx Ahexdxhro Seu Height: 2800mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2012, operating hours: 12,000 h, travel distance X-axis: 1,060 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 32i – MODEL A, total height: 2,835 mm, total width: 2,670 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 7,700 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 2,800 mm, number of axes: 3, This 3-axis Hyundai Wia F500 was manufactured in 2012. It features a table size of 1,000 × 450 mm and a maximum table load of 600 kg. The spindle speed can reach up to 10,000 rpm, with a continuous power output of 15 kW. If you are looking to get high-quality machining capabilities, consider the Hyundai Wia F500 vertical machining centre we have for sale. Contact us for further details. Control Unit: FANUC Series 32i – MODEL AVoltage: 380 V (3Ø)Frequency: 50 HzRated Power: 23 kVAFull Load Current: 35 AControl Voltage: AC 110 V / DC 24 VSpindle Taper: BT40Spindle Speed Range: Up to 10000 rpmSpindle Power Output (Continuous): 15/11 kW (20/15 HP)Spindle Power Output (Maximum): 20/15 kW (25/20 HP)Spindle Torque (Continuous): 286/143 NmSpindle Drive: Direct Drive (Direct Coupled)Distance from Table to Spindle Nose: 130–650 mmDistance from Column to Spindle Center: 475 mmRapid Traverse (X/Y/Z): 32 / 32 / 32 m/minTool Changer: 30-PositionTool Holder: BT40Maximum Tool Diameter: 90 / 150 mmMaximum Tool Length: 300 mmMaximum Tool Weight: 8 kgTool Change Time (T-T): 1.8 secTool Change Time (C-C): 5.9 secInternal Coolant Pressure: 20 barCoolant Tank Capacity: 300 LLubrication Tank Capacity: 2.6 LHydraulic Tank Capacity: 11 LAir Consumption: 250 l/minPower Requirement: Over 25 kVAOperating Hours: Approx. 12000 hSpare Spindle (Optional, not included)Approx. 105 Tools (Optional, not included) Technical Specification Taper Size BT 40 Through-spindle Coolant Yes Lredpfx Aszimp Ush Sou

Condition: like new (used), Year of construction: 2021, AUTOMATIC PALLET CHANGER Usable pallet dimensions mm2 x 650 x 400 Maximum permitted load on pallet kg2 x 250 TRAVELS AND FEEDS X axis mm 520 Y axis mm 400 Z axis mm 330 Rapid traverse X, Y mm/min 56,000 Rapid traverse Z mm/min 56,000 Working feedrate mm/min 1 ÷ 20,000 DIRECT DRIVE MOTOR SPINDLE Tool taper and shank BT30 Spindle speed rpm 12,000 Spindle motor power 30 min/continuous kW 7.5/5.5 TOOL MAGAZINE Umbrella-type tool magazine capacity 24 Maximum tool diameter mm 80/100 Maximum tool length mm 200 Ljdpfx Ahsyiu Duo Ssru Fixed position tool selection

Condition: used, mileage: 118,000 km, power: 125 kW (169.95 HP), first registration: 04/2016, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 9, total length: 6,195 mm, total width: 2,038 mm, total height: 2,673 mm, Equipment: air conditioning, central locking, navigation system, For sale is a well-maintained Hyundai H 350 touring bus with the globally popular 2.2-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6 standard * 1st owner * M1 passenger car registration Equipment: * Touring bus * 8 + 1 seats, conversion by Vogelsitze GmbH including reclining function (see pictures) * Ventilation at the seats * Kitchen including storage compartments * Automatic climate control front + rear * Rear view camera * Cruise control * Lane keeping assist * Electrically extendable step * LED daytime running lights * Roof window * Sliding windows left and right * Multifunction steering wheel * Heated exterior mirrors * Electric exterior mirrors * Electric windows * Central locking * and more... Technical data: Permissible total weight: 3500 KG * Unladen weight: approx. 2820 KG * Payload: 680 KG * Towing capacity: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer license plates (5-day / customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally prepared and hygienically cleaned! The special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior. * If necessary, paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, this includes new fluids, filters and other expenses that you shouldn't have to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We are pleased to have aroused your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found at Lrsdpfx Ahezal Aio Ssu

Condition: used, Equipment: air conditioning, Year of manufacture: 2019 Year of construction: 2019 Operating hours: 5.590 Lrjdsy Nwz Dopfx Ah Ssu Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Digging depth: 5.25 m

Condition: used, fuel type: diesel, Equipment: air conditioning, Year of construction: 2020 Operating hours: 5.710 Drive: Wheel Empty weight: 14.000 kg Dimensions (LxBxH): 769 x 250 x 314 cm Engine type: Cummins Cummins QSB6.7 Lrjdpfx Ajzb Nansh Sou Digging depth: 5.25 m Bucket volume: 0.27 m^3

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 240 mm, travel distance Z-axis: 430 mm, overall weight: 4,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik, number of axes: 2, This complete automated production cell includes two Hyundai HIT-200C CNC lathes and a FANUC M-20iA industrial robot with a ROBOTOWER automatic loading and unloading system. Each lathe offers a maximum turning diameter of 340 mm and a maximum turning length of 420 mm. The complete cell is designed for automated serial production, especially for larger production batches. Contact us for further details regarding this production cell. • 2 x Hyundai HIT-200C CNC Lathes • Year of manufacture: 2003 • CNC control: Siemens Sinumerik • Maximum turning diameter: 340 mm • Maximum turning length: 420 mm • X-axis travel: 240 mm • Z-axis travel: 430 mm • Spindle nose: A2-8 • Spindle bore: 80 mm • Hydraulic chuck: 10" • Machine weight: approx. 4,500 kg each • Rigid and dimensionally stable construction • Capable of maintaining IT6 tolerance class Additional Equipment / Automation • FANUC M-20iA industrial robot, year 2014 • ROBOTOWER automatic loading and finished-part unloading station • Automatic handling of raw and finished parts • Set of robot grippers • Operating manuals • CE documentation • Complete production cell suitable for serial production, especially for batches of 500 parts or more • Robot and loading/unloading system in very good condition • LOSMA air filtration units (oil mist collectors) visible in the photos is not included in the offer Lrodpfx Ahsznm H Re Sou Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), functionality: fully functional, power: 99 kW (134.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 11,797 kg, empty load weight: 11,797 kg, tire size: 17.5R25, tire condition: 90 %, drive condition: 90 %, axle configuration: 2 axles, shovel volume: 2.2 m³, Year of construction: 2022, operating hours: 1,050 h, Equipment: ABS, UVV, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, hydraulics, onboard computer, pallet forks, soot filter, HYUNDAI HL930A Wheel Loader Year of manufacture: 2022 Operating hours: 1,050 Cyclone pre-air filter Standard brake accumulator Standard rear counterweight 300 Standard key Work lights: 4 front / 4 rear Voltage converter 24V -> 12V LED beacon Rear-view camera Five-year Hi-mate contract Headlights: halogen Standard rear lights Piping for 3rd hydraulic circuit Beka central lubrication system Piping for quick coupler Universal bucket 2.2 m³, with teeth With emergency steering Ride control Rear fenders Quick coupler ISO SW (Volvo type) Triangle TB5 radial tyres Ledoyzbb Sspfx Ah Soru Control valve block (MCV) with 3 spools Air-suspended, heated comfort driver seat Hydraulic oil - VG46 Standard paintwork Single-lever joystick Wheel chock Front axle with limited slip differential Onboard weighing system (not calibrated)

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Lredpfsxaphnex Ah Sou

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Ljdoxaphujpfx Ah Ssru

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 100 mm, travel distance Z-axis: 290 mm, Control: Fanuc 0-T Max. spindle speed: 6000 rpm Chuck size: 6 in Max. machining diameter: 160 mm Max. machining length: 285 mm Spindle bore: 40 mm X-axis travel: 100 mm Z-axis travel: 290 mm Axes: 2 Tool positions: 8 Turret stations: 8 Tailstock: Included Made in: South Korea Lodpfx Aezr I Auoh Seru Year: 2002 Swing Over Bed: 300 mm Spindle Power: 11 kW Weight: 2600 kg Length: 2000 mm Width: 1100 mm Height: 1300 mm

Condition: ready for operation (used), Year of construction: 2019, spindle speed (max.): 3,000 rpm, total height: 1,997 mm, overall weight: 7,800 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm. Machine Benefits Technical Machine Benefits • Max swing over bed: 750 mm • Swing over carriage: 480 mm Ledpfeyi Elcjx Ah Ssru • Max turning diameter: 500 mm • Max turning lenght: 1260 mm • Sub spindle: 4000 rpm • C axis indexing: 0. 001º • X, z and b axis • Turret with 12 live tool position • Mt5 tailstock Dimensions Machine Depth 2002 mm

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 14,733 h, load capacity: 1,600 kg, lifting height: 4,700 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork carriage width: 1,000 mm, fork length: 1,000 mm, empty load weight: 4,277 kg, total length: 2,100 mm, drive type: Elektro, construction width: 1,080 mm, Electric 4-wheel forklift Load center: 500 ISO class: FEM 2 A Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-9 Lredpfsz Ify Tjx Ah Seu Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 16x6-8 Rear tire condition: 40 - 60% Battery voltage: 48V Battery capacity: 552Ah Battery year of manufacture: 2020 Additional single hydraulic circuit, side shifter, battery from 2020, 1x work light at the rear.

Condition: excellent (used), Year of construction: 2003, Siemens 840D control system Turning diameter 254 mm Turning length 500 mm Chuck diameter 210 mm Turning length 410 mm Spindle speed 4,500 rpm 8-position turret Chip conveyor Lrodpfx Ahjz Hfqij Sju

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,434 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 4,060 kg, total length: 2,600 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Lredoz H E S Hepfx Ah Ssu Load center: 500 ISO class: FEM 2 A Mast type: Standard Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 7.00-12 Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire size: 2 x 6.50-10 Rear tire condition: 0 - 20% Battery year of manufacture: 2016 Dual auxiliary hydraulics, semi-cabin, operator protection roll-over guard (ROPS), lighting compliant with StVZO (German Road Traffic Regulations), 1 work light at the rear

Condition: used, color: other, Year of construction: 2019 Operating hours: 1.530 Drive: Wheel Power internal combustion engine: 65 HP (48 kW) GVW: 5.550 kg Make of engine: Yanmar CE mark: yes Serial number: HHKHM906PK0000447 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. Ledpjt U Nxiofx Ah Soru

Year of construction: 2005, condition: excellent (used), HYUNDAI-KIA SMART TURN SKT 250MS CNC LATHE MAKE HYUNDAI KIA, MADE IN SOUTH KOREA MODEL SKT 250 MS YEAR 2005 CONTROL FANUC 18 IT SWING OVER BED 620.0 mm SWING OVER CROSS SLIDE 400.0 mm MAX TURNING DIA 410.0 mm MAX WORK LENGTH 700.0 mm TRAVEL X AXIS: 290.0 mm Z AXIS: 750.0 mm B AXIS 700.0 mm RADPI FEEDS X AXIS: 20 m/min Z AXIS: 24 m/min B AXIS 20 m/min SPINDLE SPEED 3,500 RPM SUB SPINDLE SPEED 4,000 RPM SPINDLE NOSE A2-8 Lrsdpfjp T Ulzex Ah Sju SUB SPINDLE NOSE A2-6 SPINDLE POWER 18.5/22 kW SUB SPINDLE POWER 7.5/11 kW BAR DIA 82.0 mm BAR DIA SUB SPINDLE 65.0 mm TURRET 12 STATIONS PLUS C AXIS B AXIS PARTS CHATHCHER TOOL SETTING PROBE SWARF CONVAYOR

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 10,257 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,090 mm, fork carriage width: 1,100 mm, fork length: 1,100 mm, empty load weight: 4,153 kg, total length: 2,650 mm, drive type: Diesel, construction width: 1,200 mm, Diesel forklift Load center: 500 ISO class: FEM 2 A Mast type: Standard Transmission: Automatic Technical condition: good Front tire type: Superelastic Front tire size: 2 x 7.00-12 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 6.50-10 Lsdpfxoz Hnxpe Ah Ssru Rear tire condition: 0 - 20% Battery year of manufacture: 2018 Double auxiliary hydraulics, side shifter, half cabin, blue spot, lighting according to StVZO (German Road Traffic Licensing Regulations), 1 work light at the rear.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 15,429 h, load capacity: 1,600 kg, lifting height: 5,000 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, fork carriage width: 950 mm, fork length: 1,000 mm, empty load weight: 3,317 kg, total length: 2,100 mm, drive type: Elektro, construction width: 1,080 mm, Electric four-wheel forklift Load center: 500 ISO class: FEM 2 A Lredpfxsz Ifzdj Ah Sju Mast type: Triplex Transmission: AC Technical condition: good Front tire type: Superelastic Front tire size: 2 x 18x7-8 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 2 x 16x6-8 Rear tire condition: 0 - 20% Battery voltage: 48V Battery capacity: 552Ah Battery year of manufacture: 2020 Single auxiliary hydraulics, integrated side shifter, battery from 09/2020, charger, 1x work light at the rear, load guard grid.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,010 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Oi-MC, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Travel range, Y-axis: 530 mm Travel range, Z-axis: 510 mm Table length: 1,200 mm Table width: 510 mm Orientation: Horizontal Tool interface: ISO 40 Max. spindle speed: 10,000 rpm Tool positions: 24 MACHINE DETAILS Control: CNC Control system: Fanuc Oi-MC Number of axes: 3 Power: 11 kW Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,150 x 2,300 mm Net weight: 6,000 kg Shipping packages: 3 Operating hours: 3,010 h EQUIPMENT Spindle cooling Documentation CE marking External cooling Tool magazine Chip conveyor Lsdpfx Ahsz Ebb Uj Sjru Tools included

Condition: repair required (used), Hyundai SPT-V30T machining centre with automatic tool changer. Powers on but does not start, servo error. Sold for repair or for parts. If you have further questions, we will be happy to assist. Lodpfxsx S I Iae Ah Ssru

Condition: ready for operation (used), Year of construction: 2014, controller manufacturer: FANUC, controller model: 21‑i TB, This 4-axis HYUNDAI KIA SKT 21 LMS was manufactured in 2014. It features a Fanuc 21-i TB control unit, a maximum machining diameter of Ø 254 mm, and a length of 531 mm. The spindle speed reaches up to 6,000 rpm, and it includes a 12-position tool magazine and a chip conveyor. If you are looking to get high-quality turning capabilities, consider the HYUNDAI KIA SKT 21 LMS machine we have for sale. Contact us for more information. Ljdpfx Aeyaln Ejh Soru Machine Benefits Technical Machine Benefits • Number of axes: 4 (x, z, c, b) /x axis travel: 221 mm /z axis travel: 549 mm • Max. Machining diameter: Ø 254 mm/ max. Machining length: 531 mm • Tool magazine: 12 positions • Equipment: chip conveyor /bar feeder: top automazioni mod. Magic

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-6" - Spindle power : 11 [kW] Lrodoy N Ecvspfx Ah Ssu - Spindle speeds : 6000 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 350 [mm] - Max. diameter on bench : 550 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 33 [mm] - Z stroke : 750 [mm] TURRET 1 - Number of positions : 12 - Live tools speed : 4500 [rpm] - X/Z stroke : 210 / 330 [mm] POWER SUPPLY - Supply voltage : 330 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2070 x 1650 [mm] - Machine weight : 3900 [kg] MACHINE HOURS - Number of hours under power : 32645 [h] - Number of working hours : 6498 [h] EQUIPMENT - CNC : Fanuc Series Oi-TC - Coolant tank - Chips conveyor - Parts catcher

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 570 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, Machine Tool Description The HYUNDAI-WIA HI-V410D is a vertical machining center designed for high-precision and high-productivity operations. Manufactured in 2005, it features a Siemens 810D CNC control and is particularly suited to multi-axis machining with automatic tool change and twin-pallet capability. Lrodpfx Aoxfaqweh Seu General Technical Data Brand: HYUNDAI-WIA Model: HI-V410D Category: Vertical Machining Centers (Rotary Pallet) Year of manufacture: 2005 CNC Control: Siemens 810D Machine weight: 6,500 kg Machine Dimensions: Length: 5,100 mm Width: 2,150 mm Height: 3,060 mm Spindle Spindle taper: ISO 40 Spindle speed: 10,000 rpm Spindle motor power (continuous / 30 min): 12 / 16 kW Working Capacity X-axis travel: 570 mm Y-axis travel: 410 mm Z-axis travel: 580 mm Distance spindle nose to table surface: 197 – 777 mm Distance column to spindle center: 495 mm Table Table size: 2 x (650 x 410 mm) Number of tables: 2 Maximum table load: 2 x 200 kg No. 2 rotary tables Ø160 mm with tailstock support Feed Rates Rapid feedrate X/Y axes: 36,000 mm/min Rapid feedrate Z axis: 30,000 mm/min Working feedrate X/Y/Z axes: 1 ÷ 10,000 mm/min Tool Changer Tool taper: BT-40 Tool magazine capacity: 24 stations Maximum tool diameter: Adjacent tools: Ø90 mm Non-adjacent tools: Ø150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Chip conveyor Coolant tank with pumps Spindle line air conditioner Transformer Manuals, electrical diagrams and CE Declaration

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 112 h, load capacity: 3,500 kg, lifting height: 5,020 mm, fuel type: diesel, mast type: triplex, fork length: 1,200 mm, empty load weight: 6,275 kg, total length: 4,219 mm, drive type: Diesel, construction width: 1,370 mm, Diesel forklift Load center: 600 mm Fork width: 122 mm Lrodpfxozrcv As Ah Ssu Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 – 4,999 kg Mast type: Triplex Condition: As new Technical condition: Very good Front tires type: Pneumatic Rear tires type: Pneumatic Load guard, 3rd valve, 4th valve, rear work light, front work light, roof cover, LED warning beacon, auto tilt