Used Idler Pulley for sale (479)

Condition: used, mileage: 565,000 km, power: 250 kW (339.91 HP), first registration: 01/2007, number of seats: 42, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, parking heater, * Our internal number: 1029 * PICK-UP PRICE * no TÜV (technical inspection), no new batteries, ... * Volvo * 8700 LE * AIR CONDITIONING * 250 kW - EURO 5 - Engine overhaul in 2016 (approx. 468,994 km) for over 27,300,--/net * Injection pump, etc. Fuel lines repaired at VOLVO in 12/2018! * Transmission overhauled at approx. 416,163 km!!! * Engine control unit replaced by VOLVO at approx. 410,331 km. * ZF automatic transmission * Retarder Nlsdpfxofg Nrge Abush * Auxiliary heater * mechanical wheelchair ramp * complete repair history available – partial excerpt: * Brakes, NOx sensor replaced, rear air springs, engine maintenance, air conditioning maintenance, air dryer replaced, door cylinder door 2 replaced, regular oil changes for all oils, idler pulley replaced, crankshaft seal replaced, modulator rear axle replaced, fuel transfer pump replaced, * All information without guarantee * We reserve the right of prior sale. * We refer to our general terms and conditions. * WE ALSO HAVE A VOLVO SPARE PARTS WAREHOUSE * If required, you can contact us –

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 4360-550-400 RA1606 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 4360 mm (leading belt + ascending belt with bend and upper straight) stand width (NB): 550 mm belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optional Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gearmotor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type XVT-2128 Year of manufacture: 2001 Nlodpsk Abd Njfx Abuoh incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2020, Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Nlsdpfxstp Tvwo Abueh Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Nedpstwgk Ajfx Abuolh Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2022, Motor 2.2 kW (3 hp), Sanding belt 2280 x 150 mm, Swiveling edge sanding unit, Motorized belt oscillation, Support table at the idler pulley, Nodpfsffyc Nsx Abuelh Pneumatic belt tensioning, Table size 700 x 350 mm, Working surface 1000 x 150 mm, Belt speed 22 m/s, Roller diameter 140 / 80 mm, Dust extraction port D = 100 mm Ex works, from stock in Seevetal, subject to prior sale.

Condition: used, Year of construction: 2001, Lippert belt conveyor ascending belt GF 1995-550-400 RA1656 The Lippert belt conveyor is from 2001 and in a good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT frequency converter to control the speed. Side guides and/or light barriers can be mounted on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures shown of the conveyor system were taken in a logistics center while it was still installed. Technical data: Conveyor length (NL): 1995 mm (leading belt 560mm + ascending belt 1435mm) Nsdjk Abd Tspfx Abuslh stand width (NB): 550 mm Belt width (GuB): 400 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor DT80K4/BMG/MM05 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 131 mm Belt: Type HSL-8E Year of manufacture: 2001 incline / decline: adjustable Optionally available: Supports Side guides one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 651,328 km, power: 220 kW (299.12 HP), first registration: 12/2006, fuel type: diesel, next inspection (TÜV): 04/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro4, number of seats: 53, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any warranty or guarantee, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (53+101+1+1 emergency seat) (Vehicle 193) Registration Date: 11.12.2006 651,328 km Engine: 11,967 ccm 220 KW / 300 PS Nedpfx Absz H Ediouolh Euro 4 Next inspection: 10/2026, TÜV (technical inspection): 04/2027 Permissible total weight: 28,000 kg, unladen weight: 16,490 kg, payload: 11,510 kg Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 70/50%, middle approximately 80/80%, rear approximately 40/40%, rear approximately 80/80%, rear approximately 70/80% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Fully automatic transmission Microwave Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater Retarder Radio/CD Stop brake LAWO Mobitec ICU 400 53+101+1+1 emergency seat Emergency exit 12-volt socket Chassis with signs of rust 06.02.2024: Upper control arm on the left front axle replaced, including bearing; CR tie rod new; rear axle, left front shock absorber replaced. 07.02.2024: Line from the oil filter to the engine block new; front axle, right brake chamber replaced. 22.10.2024: Hub cover on the left front axle new. 27.03.2024: 3-fan EGR on the left rear new. 22.10.2024: Idler pulley bearing new; coolant expansion tank new; axle guide on the left and right front axle and right rear axle new; axle modulator on the rear axle new; pressure reducer on the rear C-axle new. 21.01.2025: Rear axle, pads + discs new; rear axle, left axle guide new. 25.03.2025: 3rd door valve new. 21.07.2025: C-axle, left and right shock absorbers new; C-axle, left air tank new; 4-circuit protection valve new. Various signs of wear and tear, commensurate with age. Last inspection: 03.11.2025 at 643,658 km, next inspection due at 703,658 km. Price: 4,500.00 (net) All information is provided without any warranty or guarantee. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties up to a dispute value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale.

Condition: new, Year of construction: 2021, Lippert belt conveyor folding belt vertical switch diverter, distribution on 2 levels GF 3700-920-800 - NEW RA1985 Technical data: Conveyor length (NL): 1900 mm Belt body (NB): 920 mm Belt width (GuB): 800 mm Overall height (BH): 105 mm Belt height: 550 mm Basic dimensions: 3700x1500 mm, safety fence Total height: 2700 mm Njdpfxjw Uan Aj Abujlh Tilt height difference: 900 mm Conveying speed (v m/s): 0.8m/s Lifting/lowering speed: 1s Drive: SEW geared motor with Movi-mot Electrical data: Conveyor belt motor: 50Hz V380-500, kW 0.55 / S1 Tilt motor: 50Hz V220/400, kW 1.1 / S1 Idler pulley (UR): Ø = 82 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; Nlsdpfx Abswgc D Sjueh The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: used, mileage: 354,774 km, power: 235 kW (319.51 HP), first registration: 03/2010, fuel type: diesel, number of seats: 45, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, air conditioning, * Our internal number: 1077 Njdpfxjygp Hfo Abuolh * PICK-UP PRICE / Final price -> as is, where is. * MAN A 20 * Retarder * Automatic transmission * AIR CONDITIONING * SEATS also have 3-point seatbelts facing forward * CUSTOMER SERVICE performed in 06/2025: * e.g., oil change, fuel filter, pre-filter replaced, * oil filter, air dryer cartridge, idler pulleys / tensioner pulleys / * V-belt, FRONT AXLE completely overhauled, SHOCK ABSORBERS new, greased, .... * Matrix with control unit GORBA * Screen cabling incl. bracket * Folding ramp * Convector heater * 45 seats * 4 x folding seats at the KIWA parking space * 31 standing places * Raising/lowering * Paint: white * etc. * TAKE-AWAY PRICE * All information without guarantee * We reserve the right to sell the vehicle prior to sale * We expressly refer to our terms and conditions

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Nlodpfxemqty Uo Abueh Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Nlsdpfxemqtzcs Abuoh Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 24-042, overall weight: 200 kg, type of input current: AC, input voltage: 230 V, belt width: 400 mm, Magnet with neodymium head roller (can also separate slightly magnetized stainless steel parts), small conveyor belt (drum motor), and feed chute. The conveyor belt and feed chute are adjustable. Nlsdpjz Ihbgefx Abuoh The machine is mobile on rollers, available immediately, and the price may be negotiable.

Condition: used, Lippert Pre-feeding belt Post-feeding belt Conveyor belt GF 640-550-400 / 815-550-400 / 820-750-600 RA2050 Technical data: Conveyor length (NL): 640 mm or 815 mm with belt width 400 or 820 mm with belt width 600 frame width (NB): 550 mm / 750 mm Belt width (GuB): 400 mm / 600 mm overall height (BH): 105 mm support feet: optionally available Conveyor speed (v m/s): Speed will be adjusted to the main belt with gearing Drive: Overdrive with toothbelt Idler pulley (UR): Ø = 81 mm Drive pulley (AT): Ø = 81 mm Optionally available: Supports Side guides one and both sides Note that there must be a suitable gear on the output shaft for the overdrive. Therefore, you may need a different return roll. Please contact us in this regard. Nljdpfxjmqty Rs Abuoh Broken belts are replaced before delivery Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, mileage: 479,000 km, power: 350 kW (475.87 HP), first registration: 04/2015, fuel type: diesel, number of seats: 57, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, navigation system, parking heater, * Our internal number: 1004 * S 517 HD * First registered 04/2015 * Clean vehicle * 350 kW / EURO 6 (large engine) * INFO: Currently: 57-seater -> can be expanded to a total of 61 seats according to the vehicle documents. * ..... * NEW TACHOGRAPH - Generation 4.1 installed in August 2025 * Excerpt from the repair history: * Major air conditioning service performed in 06/2026 at EVOBUS (invoice available) * Exhaust cooler replaced at EVOBUS (invoice available) in 06/2026 * Exhaust cooler lines renewed at EVOBUS in 06/2026 * Oil pan sealed at EVOBUS in 06/2026 * Invoice for EUR 7,500 from EVOBUS is available. * TOTAL COSTS EVOBUS invoices: approx. EUR 27,000 * ..... * RETARDER replaced with control unit in August 2024 * Adaptive cruise control replaced in 10/2024 at Evobus workshop * All V-belts / idler pulleys / flat belts / tensioners, ... replaced * Oil change / air filter / diesel filter / ... replaced * Good tires - front axle Conti * Steering column switch replaced in 09/2024 * Retarder * Cruise control * Adaptive cruise control * AIR CONDITIONING * Auxiliary heater * TINTED WINDOWS * WC * 55+1+1 travel seats installed * (expandable to 59+1+1 seats, according to vehicle documents) * Adjustable rearward and sideways * Front matrix with control unit * Alloy wheels Njdpfjwxkh Aox Abuelh * Reversing camera * ... * Vehicle registered and in operation * Mileage and condition may vary. * All information without guarantee * Subject to prior sale * We refer to our general terms and conditions

Condition: used, mileage: 323,500 km, power: 120 kW (163.15 HP), first registration: 01/2014, fuel type: diesel, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, number of seats: 15, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Our internal no.: 1106 * MB 516 Sprinter * VDL body * Mid-City * Lettering - V I N Y L - the vehicle is fully wrapped * Class M3 * Water pump and V-belt / idler pulley replaced new in 02/2024 * Automatic transmission * TELMA RETARDER * Driver's air conditioning * Passenger compartment – A/C * Auxiliary heater / stationary heating * Convector heating * Seats: 15 Nedpfenp Dhujx Abujlh * Standing places: 12 * Vehicle speed approx. 99 km/h * Standing places * Manual folding ramp * Inspection book available * Length: 7.361 m * The vehicle has minor body damages – see pictures * More photos available on request * Front axle tires in good condition. * etc. * All information without guarantee * Subject to prior sale * Please refer to our general terms and conditions

Condition: used, Lippert belt conveyor GF 800-700-600 RA2249 Technical data: Conveyor length (NL): 800 mm Frame width (NB): 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet: optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.37 / S1 Idler pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Nodpfx Aberrk Rpjujlh Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), machine/vehicle number: 406341 S222 N7804, BRENTA ETYELEC Industrial Band Saw Robust industrial quality – built to last for generations Nlodpfxezqmhgs Abush For sale is a BRENTA ETYELEC industrial band saw, manufactured by Ateliers de Construction Louis Brenta SPRL (Belgium). This machine comes from a professional Dutch sawmill and was used reliably there for decades. It has been regularly maintained and is in good technical condition. Technical data Manufacturer: BRENTA Type: ETYELEC Motor power: 60 HP (approx. 44 kW) Speed: 340 rpm Band wheel diameter: 1,400 mm Heavy-duty industrial design Suitable for professional continuous operation Condition Band wheels overhauled New bearings on the band wheels Smooth and low-vibration operation Guides and idler pulleys in good condition Ready for immediate use Special features We are deliberately waiting with the disassembly of the machine so that interested parties can still inspect and test the machine while it is running. This gives you the opportunity to personally verify the function, smooth operation, and technical condition of the machine. Advantages Extremely robust construction High cutting accuracy Easy-to-maintain design Proven BRENTA quality Suitable for soft and hardwood Ideal for professional sawmills and woodworking companies This machine was built in a time when industrial machines were designed for a lifespan of decades. Thanks to its robust construction and high-quality workmanship, it is still a reliable investment today. We will gladly provide you with the technical data, dimensions, and drawings upon request. Inspection and demonstration in running condition are possible by appointment. We are available for further information, additional photos, or videos.

Condition: used, functionality: fully functional, cutting width (max.): 130 mm, Stenner VHJ band resaw, machine size 105, made by Stenner of Tiverton, one of the UK's most respected names in sawmilling machinery. It's a heavy-duty, cast-iron industrial resaw that has been used and maintained in a professional sawmill, with full records kept throughout its working life. Nlsdpfez E Hknjx Abush Specification • Make / Model: Stenner VHJ, machine size 105 • Serial number: AB 7508 • Motor: 18.5 kW MEZ three-phase motor (type C180M04), 400V • Braking: Fitted with electric motor braking for fast blade run-down, in line with UK PUWER requirements for woodworking machinery • 3-phase supply required Condition Fully operational. Last serviced 30 March 2026, with the next service not due until March 2027. Maintenance history • Regular documented safety inspections every year since 2016 • Professional servicing by specialist engineers, including services in 2022, 2023, 2024 and March 2026 • Wheels professionally refaced on site by Perman Stanley Ltd (saw pulley refacing specialists) in April 2023, with alignment and setup checked • Further service in December 2023 • Service and repair in April 2024 Copies of the service invoices are available to serious buyers. The written pre-operation checks, start-up and shutdown procedure, and safe operating procedure can be passed on with the machine. Included A number of sharpened blades, so the saw is ready to cut straight away. Collection Collection only. The buyer arranges transport and lifting equipment. (Assistance can be provided with removal, lifting and loading) Viewing welcome by appointment, and you're welcome to see it running under power. Please ask any questions before bidding.

Condition: new, Year of construction: 2024, Sanding belt dimensions: 150 x 2280 mm Motor power: 2.2 kW Nlsdpfodq H D Ssx Abujh Sanding belt oscillation Pneumatic sanding belt tensioning Sanding head can be swivelled 90° - 180° Additional table at the idler pulley

Condition: like new (used), Year of construction: 2011, machine/vehicle number: MA10110002, functionality: fully functional, SPECIFICATION Drilling capacity in mild steel 18mm Motor 0.45kW 415 volt Spindle 2MT Njdpfxezmunte Abuslh Drive Belt, stepped pulleys Spindle speeds rpm 50Hz 400-700-1200-2100-3600 Spindle travel 75mm Throat depth 185mm Column diameter 70mm Table -working surface 250 x 164mm Table – slots width & centres 13 x 125mm Base – overall 240 x 360mm Max. distance chuck to table 330mm Overall height 865mm Overall width 280mm Overall depth 600mm Approx. Nett weight 77Kg Machine equipped with Chuck guard Table adjustment by rack Drill chuck

Condition: used, A compact but robustly built industrial level free standing resaw. Variable feed speeds Suitable for softwoods and hardwoods Quick, simple and safe to operate Feeding system / general capacity. RVP 200 variable speed feed system Steel feed rollers 200mm dia. Variable feed speed 0 - 30 mt/min speed. Max. feed roller to blade clearance 200mm. Max. fence to blade clearance 200mm. Main saw Dia. of saw pulleys 800mm. Max. cutting height 400mm. Max. blade width 80 x 0.8mm. Max. / Min blade length 5530 / 5380mm. Height of the table from the floor 950mm. Table size 1060 x 8000mm. Automatic star-delta starter. Automatic pneumatic braking of wheels. Safety micro-switch to doors. Front infeed support rollers with emergency protection cable. Tilting table 15 dergrees. Telescopic blade guard. CHACO blade guide on the table. Nljdszx D Umspfx Abush Rackwork. Dust scrapers on wheels. Steel saw blade ready for use. Extraction points x 2 - 100 and 120mm dia. Working air pressure 6 to 8 bar.

Condition: used, mileage: 287,430 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, next inspection (TÜV): 11/2026, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore differ. * CLUTCH and dual-mass flywheel new in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, such as a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys new, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - Original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearward * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet Nlodpfxjy U A S Se Abueh * On-board kitchen * Nozzle ventilation * Reading lights * Ski compartment * Trailer hitch * Central locking * Raise / Lower * USB connection * NEW TIRES ON THE FRONT AND REAR AXLES in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our general terms and conditions.

Year of construction: 2020, operating hours: 5,000 h, condition: good (used), functionality: fully functional, machine/vehicle number: 25140, Equipment: CE marking, Secondary screen with two decks, 1200 x 2500 [mm], surface area 3.0 [m2], weight 1400 [kg], polyurethane mesh, square mesh 65 and 5 [mm]. Lateral tension, speed 900 [min-1], inclination 7°, 5.5 [kW] electric motor, pulley, V-belt, protective housing on the drive side and opposite bearing, compression springs. Machine sold without a frame. Upon request, we can manufacture a custom frame with chutes. Nlodjz Dkxyopfx Abush

Condition: new, Support roller for idler pulleys NUTR 50110 A (28104) Manufacturer: INA Inner diameter: 50 mm Outer diameter: 110 mm Width: 32 mm 3 pieces available Nlodpfx Asip Da Dobujh unused item