Used Immersion Tub for sale (845)

Condition: excellent (used), Complete line direct from Bankrupt company which was filling capsules and tablets into small tubs. Bottlea are loaded into the line from lazy susan, product is counted and doses into the tub or bottle which is then foil sealed before the screw lid is applied. All machines were bought new in 2015 and appear to be in excellent condition. The counter is a Vitacount 12-1 Dsdpfsw Hz T Eex Anzowa

Condition: excellent (used), PACK’R filling machine in near new condition. Has been filling mayonnaise and various sauces into the following; 12 x 10 kg buckets per min, 18 x 5 kg buckets per min, 18 x 2.5 kg buckets per min, 25 x 5 litre Jerry cans per min, 25 x 2.27 kg Jerry cans per min, 18 x 1 litre burger van squeezies per min. Bought new in 2017, current price is approximately £450,000 Dwjdspgq I Dspfx Anzea

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with a GlobeTech tub lidding machine which worked in line with it. Dwsdpfxepfdhps Anzsa

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Dodpfx Anjrdzbtjzewa

Condition: good (used), Year of construction: 2008, Scissor lift table, scissor lift table, scissor lift, scissor lift, single scissor lift table, flat form lift table -Manufacturer: Edmolift, scissor lifting table flat-form lifting table type TUB 600 and agg -Load capacity: 600 kg -Platform: approx. 1450 x 900 mm - Dimensions retracted: height 85 mm -Dimension extended: height 800 mm -Lifting time: approx. 13 seconds. -Quantity: 1x lifting table available Dsdpfx Ansphup Ajzswa -Price per piece Transport dimensions: 1480/930/H260 mm -Weight: 212 kg with pallet

Condition: good (used), immersion heater Dwsdpfsb A Iavex Anzoa -Power: max. 2000 W -Step switch: 12 positions -Body: made of aluminum -Connection: 230 V -Weight: 5 kg

Condition: new, Maximum tank capacity: 60 L Lifting and tilting function Battery life: 8 hours Battery: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net weight: 115 kg Stainless steel construction Mobile unit on casters User-friendly control panel Battery level display Automatic tank locking Tank can be tilted at any height Increased lifting height available upon request Adaptable to any type of tank Dimensions: 820 x 810 x 2200 mm Top width: 965 mm Usable height: 1550 mm Key advantages Mobile tank lifter suitable for professional use in catering and hospitality settings Lifting and tilting function to facilitate unloading Stainless steel construction for a clean and durable work environment Easy movement thanks to integrated casters Battery-powered operation without permanent connection Control screen indicating battery charge level Automatic tank locking in the arms Tank can be tilted at any required height depending on the application Higher lifting height available upon manufacturer's request Adaptable to any type or brand of tank according to configuration Detailed technical specifications Model: LIFTO 60 Type of equipment: Mobile tank lifter with tilting function Brand: Sinmag Europe Maximum tank capacity: 60 L Tilting: Yes Battery life: 8 hours Battery capacity: 2 x 12 Ah Charging current: 230 V Control panel: 24 V Motor power: 500 W + 140 W Net machine weight: 115 kg Total height: 2200 mm Width: 820 mm Depth: 810 mm Top width: 965 mm Usable height: 1550 mm Construction: Stainless steel Mobility: Mobile unit on casters Power supply during use: Batteries, without permanent electrical connection Battery control: Control screen for battery charge level Dwsdpezk Hf Eofx Anzoa Manufacturer's warranty: 2 years

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21137, tank capacity: 50 l, usable tank capacity: 36 l, input voltage: 230 V, inner dimension width: 280 mm, inner dimension length: 600 mm, COMPLETE ORIGINAL DESCRIPTION IN THE IMAGE GALLERY Mobile Vibratory Finishing Machine EUROTEC TV25-M – Vibratory Deburring System with Noise Protection For sale is a mobile vibratory finishing machine, EUROTEC TV25-M, in a compact design. This machine is ideal for deburring, rounding edges, smoothing, cleaning, and polishing various workpieces. Technical data: Manufacturer: EUROTEC Innovation Model: TV25-M (TV25 compact) Mobile vibratory finishing machine with complete noise protection enclosure Gross volume: approx. 50 liters Net volume: approx. 36 liters Connected power: 0.5 kW Operation via 230 V (Plug & Play) Working container: approx. 600 × 280 mm Electronic control with timer Frequency converter integrated Integrated process water treatment Process water feed pump 3-stage process water cascade (70 liters) Automatic shutdown after processing time expires Highly wear-resistant polyurethane lining Integrated scraping edge Dwedpfx Anjzktcqszja Very quiet operation due to complete noise protection enclosure Equipment: - Automatic compound dosing unit (TV25-M ACD5) - Partition module for dividing the working container (TV25 TW-G) for simultaneous processing of multiple batches - 3 stainless steel sieve boxes (TV25-M Skxx) - Various grinding media (ceramic and plastic): more detailed description see images Advantages: - Complete system on a chassis – ready for immediate use - Compact design - Easy operation - Ideal for small and medium-sized series - Uniform and reproducible processing results - Robust industrial quality The machine is in excellent condition and has been used only a few times. It has been used exclusively in a professional setting. New price as of 15.03.2023: €19,885.53 net

Condition: used, functionality: fully functional, Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Dwjdpfx Anszmxwfezja Unloading of parts through the front traps Functional machine Motor: Year 2012 Motor power: 11 kW Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

Condition: good (used), Charot Immersion tank Dodpeqqhhfefx Anzewa 1000L immersion tank, insulated jacket, pressure vessel

Condition: used, Year of construction: 2004, The Tortica Ice Group Family Tub Ice Cream Filler is a high-performance, purpose-built packaging solution engineered for efficient filling of family-size ice cream tubs and multi-serving containers. Designed for artisan creameries and industrial ice cream manufacturers alike, this machine combines precision dosing with gentle product handling to preserve texture and reduce waste. Built with robust stainless-steel construction and hygienic food-grade components, the Tortica filler ensures consistent portion control and maximum uptime. Its intuitive controls and flexible filling range make it ideal for a wide variety of frozen desserts — including ice cream, gelato, sorbet, frozen yogurt, and premium specialty blends. Key Features: - Accurate volumetric or servo dosing for consistent product weight and minimal giveaway - Adjustable fill heights and speeds to accommodate tubs from small family sizes to larger multi-serve formats - Hygienic design with easy-clean sanitary surfaces, CIP compatible components, and sealed guarding - User-friendly interface for quick changeovers and reduced operator training time - Heavy-duty construction suited for continuous production environments - Smooth, low-shear filling preserves ice cream structure and reduces air entrainment - Optional integrations for lid placement, sealing, date coding, and packing conveyors Whether you’re scaling up production or upgrading your existing line, the Tortica Ice Group Family Tub Filler delivers dependable performance, precise filling accuracy, and the flexibility to support product innovation and seasonal variety offerings. Cup size: 200 x 100 mm (LxW) Granular application: Available Dwedpeynr Axjfx Anzoa Main filling: Available Cap Closing: Available Stations: Cup Dispenser > Filler > Granular Filler > Lid Closing > Outlet Conveyor Condition: Good Available: Immediately

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Dsdpfx Asynrzbjnzswa Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: excellent (used), Year of construction: 2025, lifting height: 800 mm, load capacity: 1,000 kg, Translyft lifting table. Model TUB 1000. 1000 kg capacity. Dedpfxsy Ubtno Anzewa 1 year old (2025). Can lift up to 800 mm. External dimensions: 1450 x 1085 mm. Manufacturer's documentation included. 4 lifting tables available, sold as a set or individually.

Condition: used, This listing is for the Thermo Haake SC100 Water Bath + Immersion Circulator. The unit is in full working condition and ready for immediate use. Thermostatic water bath with integrated immersion circulator, designed for accurate temperature control in research and industrial labs. Ideal for sample incubation, heating, and fluid temperature regulation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Dwjdpfx Asy H Dlqenzoa • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-980 SA Serial No. 15.207, Year of manufacture 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working container / gross volume max. 980 liters Usable volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Speed 1000 to 1700 rpm, stepless Motor power 22 kW Dwodsdzqn Depfx Anzoa Mains connection 400 volts, 50 Hz - Operating time adjustable manually and via timer - Stepless motor speed adjustment via DANFOSS drive controller, type VLT 3032 (frequency inverter) - Manually adjustable eccentric balance weights - Container with rubber lining - Sound-insulated cover with pneumatic cover opening - Manual separating flap - Integrated screen separation device after the separating flap - Liquid connection - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Partition cover with perforated screen - 1 crate of pyramid-shaped grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm Weight 2500 kg Good condition Functional description: Workpieces and grinding media are set in motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the grinding media causes deburring and surface finishing of the workpieces.

Condition: used, WALTHER TROWAL circular trough vibratory finishing machine, type CLS-230 Serial No. 05.833/00, Year of manufacture 1969 Trough diameter 1100 mm Total trough outer height approx. 650 mm Working container / gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, infinitely variable Motor power 7.5 kW Power connection 400 volts, 50 Hz - Operating time can be set manually and via a timer - Infinitely variable motor speed via a variable gear drive - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated cover - Manual separation flap Dsdpfx Ansfqpxiozowa - Integrated sieve separation device after the separation flap - Liquid connection - Material outlet opening 180 x 150 mm - Control cabinet for wall mounting - Partition cover with perforated sieve Space requirement with base L x W x H 1800 x 1750 x 1700 mm Weight approx. 1800 kg Good condition Functional description: The workpieces and abrasive media are put into motion and gently tumbled by the generated vibration. The constant relative movement between the workpieces and the abrasive media causes deburring and surface finishing of the workpieces.

Condition: used, Technical details: Dsdsu Ix Rpepfx Anzewa turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: ready for operation (used), Sump pump, submersible pump, transfer pump, Brinkmann-Pumpen D-5980, used machine Manufacturer: Brinkmann-Pumpen D-5980 Type: TC250/720 Dwodpfxovgwqho Anzea Overall dimensions: 1180 x 230 x 290 mm Electrical data: 400V; 11.5A; 5.5kW; 2900 RPM Weight: 35 kg Capacity: 250 liters/minute

Year of construction: 2025, condition: new, The IPW 100 tank pasteurizer is ideal for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, for example, made of glass or a heat-resistant plastic bag. The exact temperature and duration of the heat treatment depend on the specific product. It is operated manually. The tank is not insulated. Dwjdpov Srabjfx Anzja • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 100 L/h Power requirement: 9 kW, 400 V, 16 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1170 mm Width: 530 mm Height: 870 mm Weight: 75 kg

Year of construction: 2025, condition: new, The IPW 200 tank pasteurizer is suitable for pasteurizing packaged fruit preparations (such as jams and preserves), fermented products (such as vinegar and beer), and pickled fruits and vegetables. The packaging must be heat-resistant, e.g., made of glass or a heat-resistant plastic bag. The exact heat treatment technology, temperature, and duration depend on the specific product. Operation is manual. The tank is not insulated. • Very user-friendly • Includes baskets for bottles and jars • Automatic temperature control • Made entirely of stainless steel (WNr. 1.4301) Technical information Capacity: 200 L/h Power requirement: 12 kW, 400 V, 20 A Material: WNr. 1.4301, AISI 304 stainless steel IP65 electrical control box Thermometers: 1 pc. Dimensions: Length: 1420 mm Width: 600 mm Dwedpfxev Srble Anzja Height: 880 mm Weight: 130 kg

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 420 mm, spindle bore: 103 mm, turning diameter: 660 mm, turning length: 3,000 mm, spindle speed (max.): 1,320 rpm, spindle speed (min.): 9 rpm, spindle motor power: 15,000 W, Equipment: rotational speed infinitely variable, Immediately available. No waiting, start machining right away! Machine: MEXPOL TUB 660 x 3000 mm Dedpfx Ajyr Dmkenzewa with stepless speed adjustment via frequency inverter Bed width: 560 mm Distance between centers: 3000 mm Center height: 330 mm Spindle bore: 103 mm Workpiece weight: up to 3000 kg Spindle nose: DIN 55027/11 Speed range: 9 – 1320 rpm Main drive: 15 kW Feed rate: longitudinal feed 0.039–18 mm/rev, cross feed 0.02–9 mm/rev Rapid traverse: longitudinal 3800 mm/min, cross 1900 mm/min Tailstock: Quill diameter 105 mm, Stroke 225 mm, MT6 Thread cutting: metric, inch, module, DP Standard equipment: frequency inverter, quick-change toolpost size C, coolant system, interlocked chuck guard, work light, change gear set, CE conformity Dimensions: 4970 × 1650 × 1500 mm Weight: 4750 kg Fixed steady rest (roller jaws) Ø 20–200 mm Fixed steady rest (roller jaws) Ø 180–430 mm Delivery: Immediate from stock (while stocks last)

Condition: refurbished (used), Year of construction: 2020, operating hours: 3,064 h, DG Tech – BLM Group Authorized Inspection Center DG Tech was created as a spin-off of DGService to specifically address the market for used BLM Group machines. Leveraging the experience gained in after-sales service and through ongoing technical training, we offer a comprehensive and reliable service. We manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, dismantling, and transportation directly, eliminating the risks associated with private sales. Dwsdpfx Asy Ddqnsnzja In partnership with BLM Group, we provide dedicated software, technical training, and post-sale support. We also offer flexible operating lease solutions to optimize investment and productivity. LC5 laser cutting machine, for both tube and sheet metal processing. Materials processed: mild steel, stainless steel, aluminum alloys, copper, brass. Automatic transverse sheet metal pallet changer – sheet metal format 3000x1500. Accessories – Active Weld: optical device for locating weld seams on round, square, rectangular, and flat oval tubes – Optional delicate tube loader – Motorized front tube collection table – maximum length 4500 mm – 2D cutting head with: Active Focus – automatic focus adjustment, Active Beam – automatic laser beam diameter adjustment – sensors for automatic control of the protective glass temperature – fiber booster – automatic nozzle changer with 18 positions – Fly Cut software.

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted Dwedpsxcuicjfx Anzja

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted Dedpfxjxcuiio Anzjwa

Condition: used, Yeast vessel on wheels, with flat conical bottom, side as well as center outlet, side wall cooling zone and lid. Dwedpfxoyzia Ae Anzoa Additional title: mobile, coolable vessel Volume approx.: 2000 l Width: 1,35 m Height: 1,7 m Weight: 150 kg Material: stainless steel Position: vertical Features: wheels, flat conical bottom, lateral as well as central outlet, side wall cooling zone, lid