Used Index G 300 for sale (140)

Year of construction: 2008, condition: used, Equipment: workpiece handling system, sub-spindle, live tooling on both turrets, two turrets, the upper turret is equipped with an additional milling spindle. Rated current: 119A, max. upstream fuse rating: 125A, control voltage: 24V DC, connected load: 70kW, control system: Siemens 800D, operating hours: 92,329h, a machine retrofit is required before the machine can be put back into operation. An on-site inspection is possible. Fgedpfx Aj Ah Tx Tjanoi

Condition: used, Year of construction: 1995, turning diameter 300 mm turning length 710 mm control SIEMENS SINUMERIC 840 total power requirement 40 kW weight of the machine ca. 6000 kg dimensions of the machine ca. m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly adjustable Spindle speeds up to 5.000 rpm Fedpfet Hw Suex Aanogi Torque Forceon main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load appr. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 resp. SIEMENS 840 C for 3 Axes X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control Panel mounted swivable on front left side of machine. * Spindle orientation in 2,5° degree steps and Spindle indexing device * Mounted hydraulic 3 Jaws Chuck make FORKHARDT Model HS 250 with many Sets of jaws. Speed up to 5.000 rpm * INDEX- Turret with 12 positions for DIN 30 tool holders, prepared for driven tools and motorized by the indexing motor, Choice of approx. 40 pieces toolholders * Hydraulic Tailstock with stroke of 50 mm and with concentricity correction device * KNOLL – Swarf Conveyor with Coolant Device and High Pressure Pump, Sliding door, Oilskimmer, etc. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1995, turning diameter 250 mm turning length 750 mm control Siemens type 840 c spindle passage 65 mm Tool changer 2 live tooling 2x Revoler Fjdpfezfqhyox Aanjgi weight of the machine ca. 7 t Main and counter spindle 3-jaw chuck with numerous jaws Hainbuch collets Many tool holders Various driven tools Bar loader "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photo The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2008, condition: ready for operation (used), Two Index CNC turning and milling centers are available. 1) Index G250, year of manufacture: 2008, swing diameter: 560mm, turning length: 800mm, bar capacity: 90mm, spindle diameter: 140mm, spindle speed: 3500rpm, spindle power: 43kW/57kW, torque: 275Nm/363Nm, indexing: 2.5°, tool speed: 6000rpm, tool drive power: 11kW, X/Z travel: 300mm/800mm, rapid traverse X: 30m/min, rapid traverse Z: 22.5m/min, feed force X/Z: 7200N/9000N, quill diameter: 65mm, machine dimensions X/Y/Z: approx. 7300mm/4000mm/2600mm, weight: approx. 14000kg, control: Siemens 840D C200-4D. 2) Index G300, year of manufacture: 1998, retrofit: 2022, turning diameter: 270mm, turning length: 710mm, max. swing diameter: 590mm, main spindle bore: 65mm, spindle diameter: 110mm, spindle speed: 5000rpm, torque: 275Nm, power: 43kW, tailstock center distance: 740mm, max. thrust force: 10kN, short slide travel X/Y: 215mm/180mm, short slide travel Z: 710mm/1250mm, feed force X/Y/Z: 8kN/16kN/13kN, rapid traverse: 20m/min, tool stations: 12. Documentation available. An on-site inspection is possible. Fjdoznmxmopfx Aansgi

Condition: used, Year of construction: 2009, Technical details: turning diameter: 270 -300 mm turning length: 710 mm total power requirement: 43 kW Fgodpfx Ajw Dud Esanji weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3,16 x 2,15 x 2,15 m The machine does not include a chuck or tools – the machine was originally purchased without these accessories. The G300 has X, Z, Y, C, SP, and driven tools. A bar feeder can be used, but the machine does not have one. *

Condition: used, Year of construction: 1990, turning diameter 626 mm turning length 3000 mm control Siemens type 840D spindle passage 100 mm turning speeds 2800 U/min weight of the machine ca. 18 t Machine overhauled in 2003 and equipped with a Siemens 840 D - NC steady rest - 400 mm power chuck The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Fedoyqtzzepfx Aanegi If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm turning length: 710 mm weight of the machine ca.: 6,5 t Fodpfx Aaex Dlhlonsgi max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: used, Year of construction: 1997, turning diameter 400 mm turning length 1250 mm control Siemens type 840 C swing diameter 590 mm turning speeds 3500 U/min Torque 275/178 Nm spindle passage 50/65 mm clamping chuck diameter 250 mm output 43/28 kw Tool changer 80 Pos. tool taper Capto C 4 Counter spindle 3500 rpm Flexible head 1500/6000 rpm (2 gear ratios) Head with 4 stations (2 fixed stations for turning/2 milling stations) Power 9.4 kW Travel 1250 mm Spindle head ISO 702/1 size 8 (HSP) size 6 (GSP) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Fgodpfxsyqvwfe Aanei About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1998, spindle speed (max.): 5,000 rpm, travel distance X-axis: 215 mm, travel distance Z-axis: 710 mm, spindle motor power: 43,000 W, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 was manufactured in 1998 and retrofitted in 2022. It features a maximum nominal turning diameter of 270 mm and a turning length of 710 mm. The machine has a maximum spindle speed of 5,000 RPM and a robust tool system with 12 positions. If you are looking to get high-quality turning capabilities, consider the Index G300 horizontal turning machine we have for sale. Contact us for further details. - RETROFIT IN 2022- Max. Nominal Turning Diameter: 270 mm- Turning Length: 710 mm- Max. Swing Diameter: 590 mm- Machine Weight: approx. 6,550 kg (Cabinet weight: 710 kg)- Floor Space: approx. 8/10 m²- Spindle Collet Clearance: 65 mm- Spindle Diameter in Front Bearing: 110 mm- Spindle Nose: ISO 702/1 Size 6- Max. Torque (100%): 275 Nm- Tailstock: Electrically movable- Distance Between Centers: 740 mm- Max. Pressing Force (electric): 10,000 N- Compound Slide 1 XYZ (top) Travel (X-axis): 215 mm- Compound Slide 1 XYZ (top) Travel (Y-axis): 180 mm- Compound Slide 1 XYZ (top) Travel (Z-axis): 710 / 1,250 mm- Feed Force (X-axis): 8,000 N- Feed Force (Y-axis): 16,000 N- Feed Force (Z-axis): 13,000 N- Rapid Traverse Speed (X-axis): 20 m/min- Rapid Traverse Speed (Y-axis): 7.5 m/min- Rapid Traverse Speed (Z-axis): 20 m/min- Axis Resolution (X-axis): 0.0005 mm- Axis Resolution (Y-axis): 0.0005 mm- Axis Resolution (Z-axis): 0.001 mm- Number of Tools: 12- Tool System: DIN 69880 (Ø30x55 mm)- Complete documentation available Technical Specification Counter Spindle Yes Driven Tools Yes Fgodpozzq E Dsfx Aanei

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 215 mm, travel distance Z-axis: 1,250 mm, overall weight: 6,550 kg, number of axes: 3, This 3-axis Index G300 RatioLine was manufactured in 2000. It features a nominal power of 43 kW and a robust machine weight of 6550 kg, ensuring stability during operation. If you are looking to get high-quality turning capabilities, consider the Index G300 RatioLine horizontal turning machine we have for sale. Contact us for further details. - Current Type / Frequency: 3 Ph / 50 Hz- Nominal Voltage: 400 V~- Control Voltage: 24 V-- Nominal Current: 78 A- Nominal Power: 43 kW- Cabinet Weight: 710 kg Technical Specification Counter Spindle No Driven Tools Yes Fedpfx Aaoz Hb Nhjnogi

Year of construction: 2005, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 200 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK, overall weight: 8,000 kg, turning length: 800 mm, machine/vehicle number: 500571, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within either May 11–13, 2026, or May 18–21, 2026, without exception. TECHNICAL DETAILS Travel X-axis: approx. 200 mm Travel Z-axis: approx. 500 mm Spindle bore: approx. 100 mm Turning length approx.: 800 mm MACHINE DETAILS Control: SIEMENS SINUMERIK Operating voltage: 400 V Rated current: 80 A Connected load: 47 kW Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 3,300 mm Weight: 8,000 kg EQUIPMENT Double turret with 12-position tool turret each Tailstock Main spindle Chip conveyor Two manuals BÜCHEL brand extraction filter Fgjdpfx Aajynhd Senoi Note: Machine can be transported on a standard truck. External reference: Pieper - Lot 50

Condition: good (used), Year of construction: 2003, CNC turning machine, manufacturer: INDEX, type: G 200-4, year of manufacture: 2003 Control system: Siemens Chuck diameter: 160 mm Fodpfx Aas Aicyzjnegi Spindle bore: 42 mm Turning diameter, max.: 200 mm Turning length: 445 mm Chip conveyor, machine, documentation included. Without tailstock. Further data can be found in the data sheet. In good condition.

Condition: used, Year of construction: 2012, swing diameter 560 mm turning length 800 mm control C200-4D Siemens 840 D spindle head 8 DIN 55026/55021 ISO 7027/1 bar capacity 90 mm spindle diameter in front bearing 140 mm turning speed range - spindle ~ 3.500 U/min drive capacity - spindle motor 100% / 40%: 43 / 57 kW Torque 275 / 363 Nm Indexing 2,5 ° C-Axis 0,001 ° Number of Turrets 1 number of toolpositions 12 pos. Spindle speed - driven tool stations ~ 6.000 min -1 power capacity - driven tool-stations 11 kW tool taper 40 x 63 mm DIN 69880 Torque 21,5 Nm travel -x axis 300 mm travel -z axis 800 mm rapid traverse X/Z: 30 / 22,5 m/min feed power X: 7.200 N Fsdpfex Emp Njx Aanogi feed power Z: 9.000 N dia. of quill 65 mm Cone SK 30 longitudinal travel 800 mm rapid traverse 10 m/min total power requirement 51 kVA weight of the machine ca. ca. 14 t dimensions of the machine ca. 7,3 x 4,0 x 2,6 m CNC Turning- and Milling Center INDEX - G 250 - Precision package for main or counter spindle - Selected spindle housing - Bearingless clamping cylinder - Precision balancing of work spindle, clamping cylinder, and collet clamping

Condition: used, Technical details: turning diameter: 626 mm turning length: 3000 mm Turning diameter: 600 mm spindle bore: 100 mm spindle turning speed range: 2800 U/min weight of the machine ca.: 18 t Machine overhold and retrofit in 2003 with SIEMENS 840 D control Fgjdpfevgmimox Aanoi - NC steady rest - 12-fold revolving head - splash doors - tailstock - coolant device *

Condition: ready for operation (used), Year of construction: 1999, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,245 mm, spindle motor power: 9,400 W, total height: 2,100 mm, total width: 2,150 mm, overall weight: 8,330 kg, product length (max.): 7,250 mm, number of axes: 7, This 7-axis Index G300 L YB was manufactured in 1999. It features a maximum turning diameter of 270 mm and a maximum swing diameter of 590 mm. The machine includes a robust tool system with 12 stations and a milling spindle speed of up to 6000 rpm. If you are looking to get high-quality turning capabilities, consider the Index G300 L YB horizontal turning machine we have for sale. Contact us for further details. • Power supply: 3 phase / 50 Hz • Rated voltage: 400 V • Control voltage: 24 V • Rated current: 120 A • Rated power: 67 kW • Electrical cabinet weight: 710 kg • Spindle bore: 65 / 90 mm • Spindle bearing diameter (front): 110 / 140 mm • Spindle nose: ISO 702/1 size 6 / 8 • Chuck diameter: 200 / 250 / 315 mm • Maximum turning diameter: 270 mm • Maximum swing diameter: 590 mm • Power (100% duty cycle): 19 / 28 / 43 kW • Power (40% duty cycle): 28 / 40 / 57 kW • Torque (100% duty cycle): 120 / 178 / 275 Nm • Torque (40% duty cycle): 178 / 255 / 363 Nm • Maximum speed: 5000 / 3500 rpm • Counter spindle bore: 65 / 90 mm • Counter spindle bearing diameter: 110 / 140 mm • Counter spindle nose: ISO 702/1 size 6 / 8 • Counter spindle chuck diameter: 200 / 250 / 315 mm • Counter spindle power (100%): 19 / 28 kW • Counter spindle power (40%): 28 / 40 kW • Counter spindle torque (100%): 120 / 178 Nm • Counter spindle torque (40%): 178 / 255 Nm • Counter spindle max speed: 5000 / 3500 rpm • Minimum distance between spindles: 20 mm • Longitudinal travel: 770 / 1310 mm • Rapid traverse: 22.5 m/min • Rapid traverse X: 24 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 24 m/min • Tool system: VDI 30 • Number of tool stations: 12 • Max boring bar diameter: 50 mm • Milling spindle speed: up to 6000 rpm • Milling spindle power: 9.4 kW • Milling spindle torque: 19 Nm Fgodpfx Aaeyyyy Djnji • Tailstock stroke: 630 mm • Tailstock quill diameter: 125 mm • Tailstock force: 7500 N • Hydraulic tank: 165 liters • Coolant tank: 300 liters Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools No

Condition: good (used), Year of construction: 1996, CNC lathe, manufactured by INDEX, model G200, year of manufacture 1996, with Hydrobar bar feeder. Control system: Siemens. Fgsdpfx Aao Aicyaensi Maximum turning diameter: 200 mm Maximum turning length: 445 mm Spindle bore: 30 mm Further data can be found in the datasheets. Machine documentation available. Machine in good condition.

Condition: good (used), Year of construction: 2007, CNC turning machine, manufactured by INDEX, model G200C-4, year of construction 2007. Control system: Siemens / INDEX, with bar feed system Hydrobar up to 42 mm. Maximum turning diameter: 200 mm. Turning length: 445 mm. Bar passage: 42 mm. Equipped with collet chuck, tailstock, chip conveyor. Machine documentation available. Fsdpfxe Aiczbj Aanjgi Further data can be found in the data sheets.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 500522, spindle speed (max.): 3,500 rpm, overall weight: 6,500 kg, spindle diameter: 140 mm, counter spindle speed (max.): 3,500 rpm, TECHNICAL DETAILS Control: Siemens Sinumerik / Index C200-4D Main Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Max. rated turning diameter: 270 mm Max. swing diameter: 590 mm Speed: max. 3,500 rpm Counter Spindle Spindle bore with collet clamping: 90 mm Spindle diameter at front bearing: 140 mm Spindle nose ISO 702/1 (Size): 8 Chuck diameter: 250/315 mm Speed: max. 3,500 rpm Min. distance collet: 20 mm Rapid traverse: 22.5 m/min Turret Number of tools: 12 MACHINE DETAILS Dimensions & Weight Footprint: approx. 8/10.5 m² Fsdpfxjxvq Rpo Aansgi Height: 2,150 mm Machine weight approx.: 6.5 t EQUIPMENT Tailstock Automatic loading and unloading system

Condition: excellent (used), Year of construction: 2012, 2x INDEX V300 vertical CNC lathe Power: 87 kW Year: 2012 1 tool turret with 10 positions CNC: SIEMENS SINUMERIK 840D sl with parts conveyor Fodpfxs Aggb Us Aanjgi Approximately 19 tool holders, including powered tool holders and 10-tool displays Chip conveyor Tilting and forklift-compatible chip bin, GOUBARD

Condition: ready for operation (used), Year of construction: 2005, operating hours: 9,091 h, functionality: fully functional, spindle motor power: 20 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 155 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 400 mm, total height: 1,850 mm, total length: 2,500 mm, total width: 1,910 mm, distance table center to spindle nose: 1,100 mm, overall weight: 4,300 kg, spindle diameter: 65 mm, feed force X-axis: 105 N, feed force Z-axis: 400 N, We are selling our INDEX G200 Compact. The machine is in excellent condition. Fgedpfx Aj Ah Tn Ueansi It will be sold including a bar loader, chip conveyor, and various tools.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, bar diameter (max.): 52 mm, counter spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Main spindle Bar diameter: max. 52 mm Main spindle speed: max. 5,000 rpm Main spindle power: up to 20 kW C-axis: available Counter spindle Counter spindle speed: max. 4,500 rpm Counter spindle clamping diameter: max. 42 mm Tool turret and tool drive Turret 1: 8 tool stations Turret 2: 6 tool stations Linear tool carrier: max. 6 tools Speed of driven tools: max. 6,000 rpm Tool drive power: 3.3 kW Rapid traverse: up to 24 m/min MACHINE DETAILS Coolant tank: 210 l Hydraulic pressure: 90 bar Dimensions & Weight Machine height: 1,750 mm Footprint: approx. 2.4 m² Machine weight: approx. 2,500 kg EQUIPMENT Synchronous/counter spindle Driven tools Bar loader up to Ø 52 mm Fgodpfx Aao Afwtzonei Chip conveyor Workpiece removal via conveyor belt

Condition: good (used), Year of construction: 2007, functionality: fully functional, spindle diameter: 60 mm, We are selling our INDEX G200. The machine is in excellent condition and can be inspected while powered on. It is being sold including a bar feeder, chip conveyor, and various tools. Fedez I Rxnopfx Aansgi The machine has only been operated with oil. The machine has X/Y/B axes!

Condition: good (used), Year of construction: 1987, functionality: fully functional, I am selling my INDEX GE 65 lathe, manufactured in 1987. The machine is in perfect working order and runs flawlessly. - Model: INDEX GE 65 - Year of manufacture: 1987 - Includes a part inspection device - Equipped with a 3-jaw chuck Fgjdpfxj Afbwio Aanoi - Two different collet sizes can be installed - VDI external and internal holders included - Without bar feeder The machine is in good condition and ready for immediate use. It provides a solid foundation for precise turning operations in the workshop. EXW Kirchhof GmbH, Remseck (Incoterms® 2020). Dismantling, loading, and transport are the responsibility of the buyer, at their own cost and risk.

Condition: used, Year of construction: 1994, functionality: fully functional, turning diameter: 42 mm, Equipment: documentation/manual, For sale: Index GB30 automatic lathe, manufactured in 1994. - The machine is in normal working order. Fgjdpfxo Ahdwao Aanoi - E173 collets - Drive for powered tools at three rear stations - Attachment for producing hexagonal shapes at position Q1 - LNS MINI SPRINT bar feeder

Condition: used, Year of construction: 2008, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2008 Control : Siemens 840D - Powerline Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):27 kW Torque (max.):145 Nm Clampingcylinder:Full-clampingcylinder Workpiececlmaping:3-Jaw chuck, Röhm KFD-HS 200 Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):27 kW Torque (max.):145 Nm Clampingcylinder:Full-clampingcylinder Workpiececlmaping:Mandrel, Hainbuch Type 211 Gr. 3 Toolcarrier I: Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:6.000 rpm, 9,5 kW, 20 Nm Toolcarrier II: Technology:Toolclampingsurface for toolholder with coolant supply Taper:T-Slots Toolcarrier III: Technology:Turret with 12 stations Taper:VDI 30 Tooldrive:6.000 rpm, 9,5 kW, 20 Nm In general: Movement in X1/Z1:1.160/260 mm Rapid travers in X1/Z1:80/40 m/min Movement in X3/Z3:540/260 mm Rapid travers in X3/Z3:40 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 20 bar Rawmaterialfeed:Circulation systems for Storage, Schnaithmann Finished partremoval:Workpieceunloading device with conveyor belt, Schmid Extraction:Interface mechanical prepared Further Equipment:Rinsing pistol Further Accessory:Misc. used static and driven Toolholder. mandrels Fgsdpfxj Ahghbs Aansi