Index g 300 for sale
Identified location: (PT) (Edit)
|
10
turning diameter 40 mm turning length 1174 mm control total power requirement kW weight of the machine ca. 30 kg dimensions of the machine ca. 40 x 10 x 1174 mm Gvuga8 New Precision Ball Screws for INDEX G300 Z2 axis NO. 114003.20 Type No. 141.260/10.40.852.1174 T3P D40x10x1174 Condition: NEW more
|
|
3
Retrofitted: 2019 Numerical control: FANUC 21iM Technical features Dimensions Table dimensions: 3600 x 1000 mm Number of T slots: 7 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2700 mm Y axis traverse: 1200 mm Z axis traverse: 1460 mm Milling head Head type: Multiangular 45º - Autom... more
|
|
4
Weinig Unimat 300 Throughfeed Planer and Moulder x 5 Spindles - 2004 CE 230 x 120mm largest cross section 13 x 6mm smallest cross section 2.0m long infeed table 5 spindles Bottom Right Left Top Bottom Cardan drive Pneumatic pressures to feed rollers Roller in front of 1st bottom spindle pneumatically controlled up / down Mechanical digital readouts for head settings Noasf Feed speeds 6 and 12m/min 6000rpm spindle speeds 40mm dia spindles ATS programmable width and t... more
|
|
5
Nominal force: 300 kN, Nominal stroke: 2.6 mm, Stopping position: P.M.S, Adjustable travel: 9-76 mm, Sliding adjustment: 60 mm, Stopping time: 129 ms, Safety distance (1.6 m / s): 174 mm, Cycles per minute: 145, Table dimensions: 300x500, Bfjkclfb2g Max closed die height: 307.5 mm, Min closed die height: 274 mm, Base carriage: 40 kg, Turns / min handwheel: 145, Max insections / min: 60, Total installed power: 2.25 kW, Supply voltage: 220 V, Auxiliary circuit voltage: 24 V, Work... more
|
|
2
Make Lödige, Type FKM-300 D1Z, No 4528, New 1968, Material Stainless steel 1.4541 (321), Lödige mixer (1x), Capacity 300 Ltr, Trough sizes dia. 650x1000mm, Inlet dia. 200 + dia. 250mm, Inspection hatch 520x320mm, Outlet 160x120mm, With adjustable packing glands , Motor 15,0 KW, 220/380 Volt, Speed mixing shaft ± 150 Rpm, Floorspace 2,3x0,8 M, Total height 1,4 M, Weight 1050 KG, Extra Specifications -- RECONDITIONED -- What you can expect from Foeth: all our machines are in working condition, ... more
|
|
7
Kaiserslautern, Germany
dealership location
1795 km
2003
ready for operation (used)
Control Unit Brand Selca Model S3045D Main Drive Spindle speed range 3000 rpm Table Outer length 3500 mm Outer width 900 mm Bfbnytheqt This Fagima MMO 300 Milling Machine was manufactured in Italy in 2003. Equipped with a SELCA S3045D Control unit, this machine can operate with a spindle speed of 3000 rpm both vertically and horizontally. Moreover, it incorporates 3 axes. Application Types Milling more
|
|
4
Screw diameter : 100 mm Eeewk8t Shot volume : 3540 cm3 bettween tie bar : 1140 x 1020 mm 2 corepulling interface robot more
|
|
7
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 4500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type:... more
|
|
6
Roll feeder sheet width: 300 mm Max. sheet thickness: 6 mm Cross section: 1.200 sq mm Feeding length: 0,1 - 6.000 mm Feeding accuracy: +/- 0,05 mm Feeding speed: 90 m / min Bd0h8kn8rp Required power main motor: 96 kW Bandeinlaufhöhe: 235 - 335 mm Leveller / Straightener sheet width: 10 - 300 mm Max. sheet thickness: 7 Cross section: 1.290 mm Levelling speed: 30 m / min Diameter of levelling rolls: 80 mm Decoiler Coil weight: 3.0 ton Material width: 0 - 300 mm Coil exterior diameter: 1.40... more
|
|
3
INDEX G 300 BI pin bi-axis TURRET 3 axes year 1998 SIEMENS 840D CABINET Maximum turning diameter: 590 mm Maximum turning length: 710 mm 2rhq8q Spindle rotation: 5000 RPM C-axis 36,000 position 2 12-position turrets Rotating tools: 6000 RPM Chip conveyor Cabinet SIEMENS 840D Maximum turning diameter: 590 mm Maximum turning length: 710 mm Spindle rotation: 5000 RPM C-axis 36,000 position Dimensions: 4000 "x 2300" x 2210 mm Weight: 6 tons more
|
|
|
|
2
Make Lödige, Type FKM-300D REI, No 1931, New 1960, Material Mild steel, Lödige mixer (1x), Capacity 300 Ltr., Trough sizes Dia. 630x920mm, Inlet 500x250mm, Inspection hatch 2x 340x305mm, Outlet 290x180mm, With adjustable packing glands , Motor 5,5 KW, 220/380 Volt, With switchgear , Floorspace 2,3x1,3 M, Total height 0,9 M What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. ... more
|
|
2
pressure:300 t distance between columns:1220 mm stroke:1000 mm distance table/ram, max. stroke up, adjustment up:1200 mm table surface area:1200 x 1000 mm pressure of drawing cushion in table:115 t stroke of drawing cushion in table:400 mm die cushion area:1100 x 860 mm table height over floor:900 mm side window:550 x 1000 mm ram surface:1200 x 1030 mm speed down:400 mm/s speed up:350 mm/s working speed:12 - 31 mm/s oil volume:1080 l power requirement:36,0 + 19,0 kW weight:22,0 t Bg7krf3gu dime... more
|
|
3
Screw diameter : 70 mm Shot volume : 1200 cm3 Bettween tie bar : 720 x 720 mm Nouv7 Interface robot 2 corepuller more
|
|
5
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-415 Technical features Dimensions Table dimensions: 2300 x 1000 mm Number of slots: 7 T slots dimensions: 18 mm Traverses of axis X axis traverse: 2.000 mm Y axis traverse: 1.000 mm Z axis traverse: 1.000 mm Milling head Head type: Universal manua... more
|
|
12
Control: Siemens All details of the machine can be found in the attached PDF document. Bflg3oddpi All information without guarantee for completeness and correctness more
|
|
2
Make Lödige, Type FM-300D, No 12529, New 1990, Material Stainless steel 1.4571 (316Ti), Lödige mixer "Pharmaceutical execution" (1x), Capacity 300 Ltr, Trough sizes dia. 600x1000mm, Inlet dia. 195mm, Inspection hatch (800x340mm), Outlet 160x120mm, Glands air purged , Motor 11/18 KW, 380 Volt, With lump breaker , Motor 4,9/5,9 KW, 380 Volt, Speed lumpbreaker 1500/3000 Rpm, Mounted on frame , With switchgear , Sizes switchgear 0,8x0,4 M, Height 1,2 M, Floorspace 2,3x1,4 M, Total height 2,3 M, We... more
|
|
10
WEINIG moulder, type Unimat 30 EL Manufacture year 2005 Machine specifications: Planing width max. 300 mm Planing height max. 120 mm Feed speed max. 36 m/min, motor power 5.5 kW Spindle layout: 1. Horizontal bottom spindle, motor power 11 kW 2. Vertical right spindle, motor power 7.5 kW 3. Vertical left spindle, motor power 11 kW (freq. speed) 4. Vertical right spindle, motor power 11 kW (freq. speed) 5. Horizontal top spindle, motor power 18.5 kW (freq. speed) 6. Horizo... more
|
|
5
Lonate Pozzolo, Italy
dealership location
1657 km
1999
ready for operation (used)
Height centres : 300 mm Swing over crosslide : 400 mm Distance between centres : 1500 mm Nodyv Spindle nose Cam-Lock DIN55029 : 8 " Spindle bore : 111 mm Spindle speed : 0 - 1.800 rpm Number of spindle speeds : 2 Spindle motor power : 11 Kw Rapid travel Z axis : 10000 mm/1' Rapid travel X axis : 7500 mm/1' Tailstock quill diameter : 70 mm Taper of quill MT : 5 CNC : FAGOR 8055 TC Tools : 4 Nr. Approx Net Weight : 3.500 Kg more
|
|
2
Retrofitted: 2019 Numerical control: HEIDENHAIN TNC-320 (¡NUEVO! / NEW!) Technical features Dimensions Table dimensions: 3500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mm Y axis traverse: 1200 mm Z axis traverse: 1000 mm Milling head Head type:... more
|
|
7
ST GERMAIN DE PASQUIER, France
dealership location
1423 km
ready for operation (used)
Cutting length (mm) 3000 Be9nki8qyl Max thickness (mm) 6 Machine equipped with: Electric rear ends / Inter-blade adjustment / Double-command pedal Dimensions LxPxH (mm) 3400x2000x2400 Machine Weight (T) 7 more
|
|
2
Make Lödige Paderborn, Type FKM-300D, No 14826, New 2001, Material Stainless steel 1.4541 (321), Lödige mixer (1x), Capacity 300 Ltr, Trough sizes dia. 650x1000mm, Top connections dia. 100mm + dia. 200mm + dia. 250mm, Inspection hatch 620x320mm, Outlet 230x170mm, With jacket (25 Ltr), Working pressure 5 bar, Max. temperature 158 Degr. C., With mechanical seals, Motor 11,0 KW, 380-420/660-690 Volt, Speed mixing shaft ± 158 Rpm, With lump breaker , Motor 4,7/5,9 KW, 400 Volt, Speed lumpbreaker ... more
|
|
2
Plate roll bending machine dual pre-pinch planetary hydraulic model MG3130/200V - condition same as a new with warranty . Bending capacity 3100 x 130 mm / 200 mm 3000x 140 mm Ø 5600 3000x 80 mm Ø 1400 2000x 168 mm Ø 5600 2000x 95 mm Ø 1400 1200x 200 mm Ø 5600 Vpgcaqr0 1200x 125 mm Ø 1400 Construction technical data: Surface length of the 3 rolls useful 3100 mm Top roll size 940 mm Lower rolls size 840 mm Opening between the rolls up to plate thickness ... more
|
|
12
Kaiserslautern, Germany
dealership location
1795 km
2006
ready for operation (used)
General Data Measurements width 1470 mm Measurements depth 3092 mm Measurements height 3062 mm Control Unit Brand Mitsubishi Model MEDALS 60/60S Main Drive Spindle speed range 15000 rpm Number of axis 4 (3 axis in spindle + 1 axis in table to mill two sides) Movement X-Axis Movement 500 mm Y-Axis Movement 300 mm Z-Axis Movement 400 mm Table Be9im7rwh2 Outer length 700 mm Outer width 340 mm This DMG Mori Seiki ULTIMILL V-3000/MSX-850 Vertical Machining Center was manufactured in 2006. Equi... more
|
|
3
Schijndel, Netherlands
dealership location
1830 km
2000
ready for operation (used)
End sheet tipping, Book back gluing and back lining, Drying, Nipping, Belt infeed, De-stacker: FS.A, 1st gluing station: Cold glue nozzle HHS, End papering machine, model: Sigloch VAM, Belt infeed, model: AB, Cold glue nozzle glue system for joint gluing, Book back gluing and back lining: SB 3000, 1st gluing station: Cold Glue, IR dryer in between 1st & 2nd glue unit, 2nd gluing station: Cold Glue, Backlining station, Pressing station, Forming station, Drying, cooling and tranport system, length... more
|
|
6
Harc29r Used forging manipulator DANGO AMP 3000 (3t capacity) in good working condition with cable drum. Further data on request. Total power consumption in kW: 55 Overall size (lxbxh) in mm: 5770 x 2635 x 401 Total weight in kg: 22000 more
|
|
2
Make Gebrüder Lödige Maschinenbau GmbH Paderborn, Type FKM-3000 D, No 13.815, New 1996, Equipped with 2 liquid injection nozzle, Material Stainless steel 1.4541 (321), Lödige mixer (1x), T-arms , Capacity 3000 Ltr, Trough sizes dia. 1420x1900mm, Top connections 3x dia. 350mm, Inspection hatch 1700x750mm (1x), Outlet 300x240mm + 2x 160x120mm, Glands air purged , Motor 90,0 KW, 400/690 Volt, With lump breaker (3x), Motor 5,5 KW, 380-420/660-725 Volt, Speed lumpbreaker 2910 Rpm, With switch , Fl... more
|
|
13
DUROPLST 2009 retrofit, both machines got new monitor, both machines were checked regularly, the 270C 300-80 has asymmetric adjustment of the injection moduleR1189 Centrex A 270C 500-100 Screw 20mmR1190 A 270-300-80Bj93 Screw 25mm Noxeb more
|
|
3
pressure:300 t distance between columns:1640 mm stroke:900 mm Distance table/ram, stroke up:1200 mm table surface area:1600 x 1300 mm table height over floor:890 mm ram surface:1600 x 1300 mm Hqeuymbz Speed down:400 mm/s Speed up:300 mm/s Working speed:10 mm/s Oil volume:1150 l power requirement:42,5 kW weight:25 t dimensions (WxDxH):2,8 x 2,5 x 5,0 m German Safety: permitted for manual loading:CE-sign foundation pit:not necessary more
|
|
4
X-AXIS TRAVEL: 280 mm Nnhu9 Y-AXIS TRAVEL: 185 mm Z-AXIS TRAVEL: 280 mm MAX ELECTRODE WEIGHT: 20 Kg MAX PIECE WEIGHT: 500 Kg TABLE SIZE: 450 x 350 mm TOOL MAGAZINE: 6 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 1400 Kg OVERALL DIMENSIONS: 2000 x 1200 x 2100 mm ACCESSORIES: C-AXIS; RS 232 SERIAL PORT PRICE: On demand more
|
|
6
Used screw press WEINGARTEN PS 300 with direct drive. The WEINGARTEN PS 300 is still installed and under power. Pressing capacity in t: 600 nominal / 1400 max. Opening between the stands in mm: 770 Height above floor in mm: 5500 Stroke per minute: 33-45 (22 usable) Stroke in mm: 160 - 480 Table size (lxb) in mm: 700 x 800 Ram size (lxb) in mm: 700 x 800 Bfm8vjvbon Daylight in mm: 670 - 1150 Total power consumption in kW: 75 Total weight in kg: 38.200 more
|
|
2
Make DMN Westinghouse, Type BL-300 MZC "Easy clean", New unknown (manufacturer tag is missing), Material Stainless steel, Housing material Stainless steel, Rotor material Stainless steel, Rotary valve for air transport (1x), Rotor diameter 300mm, Rotor width 380mm, Inlet dia. 315mm, Outlet dia. 125mm, Outlet flange sizes dia. 225mm, With motor 1,1 KW, 220/380 Volt, Floorspace 1,6x0,9 M, Total height 0,7 M, Weight 500 KG What you can expect from Foeth: all our machines are in working condition, a... more
|
|
3
offer consists of: - Bourg perfect binder BB-3002 Dmrsvgvh Bourg BB-3002 one-clamp perfect binder - clamps: 1 - spine gluing: Hotmelt - sight gluing: hotmelt - milling section: with extraction - milling depth: adjustable - sheet size: max: 385 x 750 mm; min: 100 x 201 mm - cover size: max. 385 x 750mm; min. 100 x 201mm - book thickness: max. 60mm; min. 1mm - cover weight range: 80 - 300 g/sqm - cover pile hight: max. 80mm - speed: max. 650 cycles/h dimensions: 2.020 x 2.400 x 1.500m... more
|
|
6
Bdt9trrcfi Technical details: Net Weight: 2550 Kgs Equipments: Digital, offset-like printing process with HP Elektronik liquid toner and blanket Support and formats: Postscript Level 3, PDF 1.5, TIFF, JPEG, EPS In-line densitometer Wide range of substrates and foils Autoduplex / autoperfecting by default more
|
|
4
LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1200 mm RAM TRAVEL: 900 mm Tajzzmre TABLE SIZE: 3500 x 900 mm HEAD: ISO 50 - DIN ; 3000 rpm TOOL MAGAZINE: 10 POS CONTROL UNIT: SELCA S3045D PRICE: On demand more
|
|
11
Used Index G300-4/GSP/ X/Z/Y/BBYear 2001Steering Siemens 840DMain spindleMaterial passage 65 mmRpm 5000 1/minPower at 100/40D 28/40 kWWood clamping cylinderC-AxleThree-jaw chuckCounter-spindleMaterial passage 65 mmRpm 5000 rpmPower at 100/40D 28/40 kWWood clamping cylinderC-axleCoolant through counter-spindleThree-jaw chuckTool carrier 1 /X/Y/Z/B)Turret head 12 stations VDI 30Traverse X/Y/Z. 215/180/1250 mmTool drive unitMilling spindle HSK 50Tool carrier 2 (X/Z)Turret head 12 stations VDI 30Tra... more
|
|
2
Make RotaVal UK, Type HD-300, No 000771.01.01, New unknown, Material Stainless steel, Housing material Stainless steel, Rotor material Stainless steel, Rotary valve (1x), Rotor diameter 300mm, Rotor width 320mm, Inlet dia. 310mm, Inlet flange sizes dia. 485mm, Daylight 455mm, With motor 0,75 KW, 230/400 Volt, Floorspace 0,7x0,7 M, Total height 0,5 M, Weight 250 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for... more
|
|
1
Weeze, Germany
dealership location
1867 km
ready for operation (used)
Ricoh Aficio MP C3002 MFP/copier up to A3 format with Finisher SR3070The perfect partner for a productive office (manufacturer's specification)The Aficio™ MP C3002 is the perfect office partner: Intelligent MFP that adapts to the specific needs of your team. In three words: efficient, productive and versatile. The user-friendly home screen saves time and effort. Practical features support workflow and connectivity between colleagues. With optional checks and controls, you can set your own securi... more
|
|
6
Widdersche Straße 125, 47804 Krefeld, DE
1861 km
excellent (used)
Used pallet rack shelving - approx. 3,500 x 11.300 x 1.100 mm - heavy load shelving Properties *: -Shelf height: approx. 3,500 mm -Shelf width: approximately 11,300 mm -Shelf depth: approx. 1.100 mm -Tray width: approx. 2,700 mm -Pitch: 50 mm -Box load: approx. 2,700 kg -Load capacity: approx. 1,350 kg -Pallet places: 36 * All specified loads apply to uniformly distributed loads per compartment, compartment height of up to 1,750 mm. All dimensions are approx. figures. S... more
|
|
6
Code: 0695 Brand: AGLA Model: 2/300 Vertical polishing machine for wood, metals, aluminium and various materials Fh7dmd2 Heavy cast iron structure Brush diameter mm 300 2 speed motor Overall dimensions: mm 1500 x 750 x 1050 h Weight kg 350 more
|
|
3
work piece width:300 mm workpiece height:50 mm bore diameter:8 - 27 mm total power requirement:25 kW weight of the machine ca.:3,3 t dimensions of the machine ca.:2,3 x 2,5 x 1,4 m workpiece weight:max. 3 t Number of drilling agregates:3 Stk. feed stepless:25 - 300 mm / min saw blade diameter:630 mm cutting width:6 mm cutting speed:32 m/min Bewiko9prh Peddinghaus CNC controlled beam saw drill line DSC300 A with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring ... more
|
|
2
Make EMDE Industrie- Technik Nassau, Type KH-300 + MDRD-120 + C-250, No A 106.0212, New 2006, Material Stainless steel 1.4301 (304), Capacity (liter) 250.0000, Lifting + tilting machine /Container emptying station/vibro feeder (1x), Max. weight scale 15 KG, Mechanical drive 0,55 KW, 230/400 Volt, Mounted on frame , With 2 containers (dia. 800mm), type C-250, With switchgear , With vibro feeder type MDRD-120, Floorspace 2,1x2,0 M, Total height 2,1 M, Weight 920 KG, Extra Specifications Containers... more
|
|
4
Weeze, Germany
dealership location
1867 km
ready for operation (used)
Samsung A3 multifunction printer SMART MultiXpress X4300LX - The new way of printing. Printing with touchscreen, like a tablet: The SMART MultiXpress X4300LX combines innovation and ease of use. The Samsung SMART UX Center is the first intuitive, intelligent and extensible UX technology for Android™. This ensures compatibility with various Android-based devices. Enjoy pre-installed applications and widgets: convenience and workflow is a top priority. Your favorite applications, such as Copy, Sca... more
|
|
|
