Used Industrial Furnace for sale (25,817)

Year of construction: 1991, condition: used, functionality: unexamined, Natural gas-fired, removable car-type batch furnace / kiln / oven for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Gujdpfx Absxvtate Ujk Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Gedefbl T Nepfx Ab Ujuk Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed!

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. Gusdsfz U Tqepfx Ab Uok It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 1999, condition: used, functionality: unexamined, Natural gas-fired, removable rack-type batch furnace for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Width: 1,000 mm Height: 1,150 mm Gsdpfx Aexfi Ulsb Ueuk Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption Gedpfxjfz Anpo Ab Ujuk The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. Gedpfsfy Txyox Ab Ueuk In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: used, Large Gas-Fired Furnaces for Sale: 7500 long x 2780 wide x 2000 height. Guedpjvitnhsfx Ab Usk These are Internal - bed sizes Gas fired Eurotherm Control 4102. Will heat up steel to 1000 degrees C plus. Both installed and working order. Spares available including a controller and thermocouples.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Gujdpfxju Ixt Do Ab Uok

Condition: used, B&R X20 CP 3586 IF 2772 DI 9371 DO 9322 RA2038 Manufacturer: B&R Industrial Automation Components: 1x X20 CP 3586 3x X20 IF 2772 2x X20 DI 9371 1x X20 DO 9322 Intel ATOM 1.6 GHz with additional I/O processor Gsdpfx Abok Abwlj Usuk Ethernet, POWERLINK with Poll Response Chaining and USB on board 3 slots for modular interface expansion CompactFlash as exchangeable program memory 512 MByte DDR2 SDRAM main memory Controller redundancy possible Fanless Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany

Condition: new, Year of construction: 2025, GWDress-250 smartline – Semi-Automatic Grinding Wheel Dressing Machine The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to Ø 250 mm. With selectable manual or automatic control, dressing processes can be designed flexibly and efficiently. The machine comes standard with an enclosure for maximum occupational safety as well as effective protection against dust and noise. Wet dressing is also possible. Gujdpfx Aow E E S Aob Uek Highlights: - For grinding wheels up to Ø 250 mm - Automatic traversing via control system - Can be operated manually or semi-automatically - Enclosure for safety, noise reduction, and dust control - Precision dressing of radii and wheel packs – accurate to within 2 µm - Wet dressing function - Excellent price-performance ratio The perfect solution for all those seeking top precision, ease of operation, and reliability at an unbeatable price.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, High pressure fan motor 15kw / 3000 rpm. Guodpex Htakofx Ab Ujk Maximum 1415Nm3/hr on 138mbar Weight 337kg. Possible to buy maximum 3 fans- one unused ,other 2 littlebit runned, max 2-3 months.

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Model: ABMC-1 Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Gjdpfjxmhqzjx Ab Uouk Voltage: 380V (50Hz)

Condition: used, Nominal speed 5879 rpm, max speed 5900 rpm, inlet volume 1.39m3, total pressure 26323 Pa, inlet power 48.6 kw Gujdpeup Iktofx Ab Usk

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Ref Raun Gjdpfx Absu Ixkpe Uouk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, MiR 200 December 2018 – used but in perfect working condition Length: 890 mm Width: 580 mm Height: 352 mm Weight (unladen): 62.5 kg Loading surface: 600 x 800 mm Robot payload: 200 kg (maximum 5% incline) Towing capacity: 500 kg (see separate MiRHook 200 datasheet) Endurance: 10 hours or 15 km Maximum forward speed: 1.1 m/s (4 km/h) / reverse: 0.3 m/s (1 km/h) Battery: Li-NMC, 24 V, 40 Ah; charging time: up to 3 hours (0-80%: 2 hours) WiFi: Dual-band wireless AC/G/N/B SICK S300 laser scanners (x2): 360° visual protection around the robot Intel RealSenseTM 3D Camera: Object detection in front, 50-500 mm from the floor Ultrasonic sensors (x4): Detection of transparent objects in front, e.g. glass doors Safety compliance and certifications: EN 1525, PLd cat. 3, ESD approved and CE certified Price €13,000.00 (+VAT) Guodpfeun Sq Uex Ab Usk

Year of construction: 2015, condition: good (used), Deburring machine, used Make: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed 2-8 mm/s Feeding speed 0,6-3,2 mm Gusdpoikm Tkefx Ab Uek Extraction: Donaldson Performs edge rounding and removes sharp edges on both the outer and inner contours of stainless steel, steel, or aluminum that have been cut in a laser, shearing, or punching machine. Dimension; 2730x1740x1940 mm Weight: 1790 kg.

Condition: ready for operation (used), functionality: fully functional, type of cooling: air, Industrial Cooling Fan Unit EIV-7B with 11 kW Motor + Heat Exchanger Complete industrial cooling/ventilation assembly previously used for insulator cooling. The set includes a centrifugal fan EIV-7B, a 11 kW three-phase motor, a mounting frame, and a heat-exchange module. Removed from a working installation during system modernization. Gusdpjxznylofx Ab Usk Technical Specifications Model: EIV-7B Airflow: approx. 7000 m³/h Speed: 2880 rpm Motor Power: 11 kW, 3-phase, 400 V Fan Type: centrifugal / radial Mounted on a steel base frame Equipped with a heat-exchanger block (can be sold together or separately) Suitable for industrial cooling, ventilation, energy systems, filtration, HVAC, etc. Condition Mechanically in good working order Previously operated via a frequency inverter Removed from a functioning installation

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, overall weight: 70 kg, load capacity: 100 kg, 6 MiR100 robots with 3 charging stations. Gusdpfx Ajv Ikrzjb Ujk

Condition: excellent (used), Wentylatory przemysłowe z chillerow/agregatów wody lodowej: Trane, Carrier, Climaveneta, Bluebox, Clivet, Emicon, Inny. Ilość: 50 szt. Różne średnice: 80-110 cm Więcej informacji i dokładne ceny pod nr tel Podana cena jest ceną netto Kompleksowe i fachowe doradztwo pod względem doboru agregatów wody lodowej. Gwarancja (wliczona w cenę) 12 miesięcy pod warunkiem uruchomienia przez nasz serwis techniczny. Wysyłka (wyceniana indywidualnie) lub odbiór osobisty w naszym centralnym magazynie koło Lublina. Jesteśmy na Polskim rynku od 2016 roku. Ze względu na skoki kursu walut i częste zmiany stanu magazynowego proszę się skontaktować w celu ostatecznej wyceny oraz dostępności urządzenia. Gedpfjkzkvwsx Ab Usuk Posiadamy więcej Agregatów Wody Lodowej nowych-OUTLET i używanych. Ponad 150 urzadzeń dostepnych w naszym magazynie. Zapraszam do zapoznania się z naszą ofertę na stronie

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Godpforfdq Usx Ab Ueuk

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, AMR MiR500 – Year 2018 – in excellent condition General specifications Payload: 500 kg Gujdsxxzbdjpfx Ab Usk Dimensions: 1350 mm (length) x 920 mm (width) x 320 mm (height) Maximum speed: Up to 2.0 m/s (with speed upgrade kit) Acceleration: 1.0 m/s² (with full payload) Unladen weight: 250 kg Navigation and safety Navigation: Autonomous, equipped with laser scanners and 3D cameras for 360° vision and obstacle avoidance Safety: ISO 13849-1 compliant, with 5 integrated safety functions and emergency stop Minimum turning radius: 2200 mm (standard) Minimum doorway width: 1950 mm (normal operation) Power and battery Battery: 48V Li-NMC, 2 kWh capacity Charging: Compatible with MiRCharge 500, cable charger, or MiRCharge 48V Charging time: Approx. 1 hour for 10–90% charge using MiRCharge 48V Connectivity and I/O Connectivity: Dual-band WiFi (AC/N/G/B) and Ethernet with Modbus protocol I/O: 4 digital inputs, 4 digital outputs Safety I/O: 8 digital inputs, 5 digital outputs Environmental conditions Operating temperature: +5°C to 40°C Storage temperature: -10°C to 60°C Humidity: 10–95% non-condensing Price: €16,500.00 (+VAT)

Condition: excellent (used), Washing machine which can wash a tote bin and its lid at the same time. Excellent condition. Gusdpfx Aov Ihgvjb Usk

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Godevtcqgjpfx Ab Usuk

Condition: new, Unused bin washer. Bought for a contract which never materialised. Gedpfotpv T Nsx Ab Ueuk

Condition: as good as new (ex-display), Brand new, unused. Double door twin dolav washer, will also wash tote bins. Still in its protective wrapping. Rare opportunity! Gedpfx Ajvvw Niob Ueuk