Used Ink Station for sale (6,489)

Condition: used, Transfer station, stop table, feed unit -Stop is moved via a: trapezoidal thread spindle -Spindle stroke: 850 mm Laedpfx Alsc Rzk Rj Nsc -Execution: stable -Drive motor: 0.37 kW -Speed: 250 rpm -Number: 1x stations available -Price: per piece -Dimensions: 1825/500/H920 mm -Weight: 138 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm Laodpfxob A Himj Al Nsc -Rollers: rubberized -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Condition: used, Turning station RITTAL / E SYS-K System GmbH Automated turner for packaging made from ALU system profile Swivel station with roller conveyor, ALU system profile BOSCH REXROTH Weight of turning device: 730 kg As-new condition Lsdpjv Tdkbefx Al Njac

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements Lajdpfxjf Axn Ao Al Nec ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: excellent (used), Trumpf Type: TruMark 3000 Laser marking station Wavelength: 1064 nm Ljdpfx Aljv Hfu Us Nsac Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat manufacturing, blind manufacturing Lajdpfx Alspvqy Do Nsc -Profiling plant: Replacement stations for ID26309 -Profiling machine: heavy-duty design, used for manufacturing slats/blinds -bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm -Weight: 702 kg

Year of construction: 2009, condition: good (used), Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller track, roller track with pull-off conveyor -stable design -electrically powered -Drive motor for roller conveyor: 0.37 kW 71 rpm -Drive motor for conveyor belt: 0.37 kW 88 rpm -Roller width: 1440 mm -Conveyor length: 1400 mm -Conveyor belt transfer: 1400 mm -pneumatic lifting -Roller diameter: 105 mm -Rollers: rubberized Ledob A Hdkjpfx Al Neac -Shaft diameter: 25 mm -Adjustable delivery height: 950 mm -driven: via timing belt -Dimensions: 1450/1650/H1000 mm -Weight: 420 kg

Condition: like new (used), VD Process Industry big bag discharging station with bag tipping cabinet Refurbished Big bag discharging station equipped with frame for electric hoist and big bag cross beam (excluding electric hoist) Bag tipping cabinet Laodpfx Ajxc I I Sjl Njc Fitted with DMN stainless steel rotary valve type: BL200 2 See our other advertisements VMA Wekerom

Condition: new, In addition to standing a PDF document, see the description of positions - Prices on request! RUCHSER standard offer with layout for a wooden window production with being milled Glass bar and screwed corner joints. Daily capacity approximately 15 Window Manufacturing consisting of: Item 1.0 - Item 107 850 000 RU-PWD-H1600/130/4 profile carriage double-sided Length 1600 mm, width 850 mm, height 2140 mm for horizontal position round and transport of Profile sections. 12 support arms each column welded to the column, 2 adjustable center column, clear spacing of the support arms 130 mm, Depth of the support arms on each side 400 mm, Support arms covered with felt, with 4 plastic swivel castors, diameter 150 mm, of which 2 with stop means. Item 2.0 - Item 0150001 RU-M rotation - tilting table manually tiltable bearing surface 1300 x 1400 mm, with 4 plug extension 1000 mm long, including tool tray without weatherboard- ausspaarung. Item 2.1 - Item 5009-1 2 trays with 2 drawers (for RU-4, RU-2/4) Item 2.2 - Item 5062-1 Extract left and right 500 mm and up to 7000 mm folded down with one support leg Item 2.2 - Item 5012-1 Hinged extension tubes Length 700 mm (max. 3 pairs) Item 2.4 - Item 6125-2 Corner mounting fixture AoE attacks rectangular pneumatic lowered with clamping unit for 2 profiles mounted on RU-M Item 2.5 - Item 2069-1 tilting instead of manually, pneumatically operated Item 3.0 - Article 10.782 million RU-EW-2S two-sided vehicles in stock Storage capacity max. 36 piece sash L - shaped screw, length 1200 mm, Depth 800 mm, height 2200 mm, edition of Holme felted, 4 swivel castors, 2 with brakes Item 4.0 - Item 6600000 RU-KWI-1000 Commission cart unladen be nested, Length 1120 mm, width 1100 mm, working width 850 mm, height 1900 mm, Plant height 1500 mm, bearing capacity 750 kg mobile on 4 plastic castors, Diameter 150 mm, 2 with Stop device, 2 drawers on the left and right each 350 mm in length, max. 1800 mm and Height max. 2100 mm Item 5.0 - Item 740-300 RU-DH-F2 double reel cart for 2 rolls to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Item 5.0a alternative to Item 5.0 - Item 744-200 RU-DH-F4, double coiler car for 4 wheels to roll size 620 x 350 mm (without coil) to roll size 800 x 350 mm (with coil) with 4 swivel castors, 2 with stop device Lodpfxeytx Urs Al Neac Item 6.0 - Article 7.36 million RU-BW-1200-fog Cart with 16 divisions, length 1200 mm, Width 700 mm, height 1100 mm, with 2 shelves, mobile on 4 Plastic castors with a Diameter of 125 mm, 2 with stopper Item 7.0 - Article 10.0092 million RU-FMOG / K wing mounting rotary tilting table * for wings with attached bar and milled glass Bolt on corner joint. Rotary-tilting table with pneumatic tilting device and 6 piece sliding vacuum suction cups. Adjustment range in width from 4...

Condition: new, Ruchser standard offer with layout for a timber window production line featuring profiled glazing beads and screwed corner joints. Daily capacity approx. 30 windows The production line consists of: Pos. 1.0 – Article 107850000 1 piece RU-PWD-H1600/130/4 profile trolley, double-sided, length 1600 mm, width 850 mm, height 2140 mm for horizontal storage and transport of profile cuttings. 12 pairs of storage arms welded to each column, 2 central columns adjustable, clear spacing between storage arms 130 mm, depth of storage arms on each side 400 mm, arms covered with felt, with 4 plastic castors, diameter 150 mm, 2 of which have locking devices. Lajdpfx Aloytx Ulo Njc Pos. 2.0 – Article 10776000 1 piece RU-MSTR assembly station for frame fitting components, 3000 mm long, width 600 mm. 1 shelf for hardware parts, 1 support table covered with felt, working height adjustable between 900 – 1100 mm (without screwing units). Pos. 2.1 – Article 6747 1 piece running rail with carriage, 3000 mm long. Pos. 2.2 – Article 6308 1 piece balancer for equipment 3 to 5.5 kg. Pos. 2.3 – Article 10778000 1 piece RU-STS-A inline screwdriver with automatic screw feeding system POWASERT, consisting of inline screwdriver and feeder unit ADS-MF4, complete with hose connections. Inline screwdriver ADS 2445 RD with torque shutoff. Set up for the screw feeding used by the customer. Suitable for the following screw dimensions: Shaft diameter: 2.4 – 4.0 mm Shaft length: 10 – 35 mm Head diameter: 5 – 8 mm When ordering, information about the screw must be provided to the manufacturer at the factory. Pos. 3.0 – Article 10782000 1 piece RU-EW-2S storage trolley, double-sided, max. storage capacity 36 sash frames screwed in an L-shape, length 1200 mm, depth 800 mm, height 2200 mm, support rails covered with felt, 4 castors, 2 of which have stoppers. Pos. 4.0 – Article 10766000 1 piece RU-DR-1 rotary table with mobility unit for frame assembly. Table with parking brake. Support platform with cross beams and one extension to the left and right, each with felt pad. Base dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, working height adjustable 900 – 1100 mm. Pos. 4.1 – Article 5360-01 1 piece fixed tool tray, 1000 x 400 mm for RU-DR-1. Pos. 4.2 – Article 6354 1 piece 3-meter double guide rail for mobility unit, rail height 10 mm. Pos. 4.3 – Article 6454 1 piece mobility unit with flanged track wheels and parking brake. Pos. 4.4 – Article 6788 1 piece corner screw device. 1 pair of pneumatically height-adjustable clamping units for securing profiles at right angles. Pos. 5.0 – Article 10383000 1 piece RU-DK-T14/34 tilt-turn table with pneumatic tilt system. Working platform with 4 support bars, base dimensions 1400 x 1500 mm, extended 3400 x 2300 mm. Tabletop covered with felt. Tilting table height adjustable from 900 – 950 mm. 2 folding and sliding support plates installed.

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker Lajdet Ty A Ajpfx Al Njc No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: used, Year of construction: 2000, functionality: fully functional, pressing force: 70 t, For sale: a fully functional and well-maintained Husmann MP6070-TS waste compactor installation, currently still in daily operation. The installation is immediately ready for use and is particularly suitable for compacting and transferring various waste streams. Lodpoxuhtrofx Al Nsac Features: - Fully operational and functional installation - In daily use and well maintained - Includes two swap bodies for moving containers - Equipped with hydraulic container couplings and a hydraulic container locking system - Features a large feed hopper - Can be easily filled with a wheel loader, excavator, or from a platform/ramp - Immediately available for use Containers are not included.

Condition: excellent (used), Epson G10-854SR Robot Assembly Station, Dispensing Station The assembly station is divided into the sub-stations 3.1 Dispensing Area, 3.2 Assembly Area Cooler + End Plate, and 3.3 Front Assembly Area. (Cooler = Heat Sink, End Plate = End Plate Angle) St. 3.1: Dispensing Area - A WT (Work Tray) with attached chassis and circuit boards enters the dispensing area via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place. - The x-y-z handling system then moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling system moves over the rest position, and the WT is placed back onto the belt. - Further transport to the assembly area Cooler + End Plate (condition: no WT in the assembly position). St. 3.2: Assembly Area Cooler + End Plate - A WT from the dispensing area enters the assembly area Cooler + End Plate via the transfer belt. - It is stopped at the lifting and positioning unit (HuPo), lifted from the belt, and fixed in place, while the side walls of the chassis of the partially assembled unit are aligned. - Simultaneously, the cooler tray and end plate tray are positioned. - A stack of cooler trays (12) and a stack of end plate trays (12) are manually placed on the respective infeed belt outside the protective enclosure. - The two safety gates are opened, and the loaded tray stacks move into the gripping position of the respective stacker. - The two safety gates are closed again. - The respective grippers grasp the corresponding tray. - The z-axis separates the trays and transports them upwards (above the actual picking height). - A centering support is pushed and positioned under the respective tray using x-axis movement for centering and tray stabilization. - The respective stacker's z-axis places the respective tray on the corresponding centering support. - The trays are ready for component removal. - The multi-gripper on the SCARA robot grips the cooler in the tray and places it in an intermediate position as an alignment aid (to compensate for inaccuracies when picking from the fixed gripping position for assembly). - The cooler is scanned, gripped again, and, if the scanner result is positive, mounted on the WT. - The non-conforming cooler is placed in a non-conforming box. Ledpfoibx S Njx Al Njac - The multi-gripper on the SCARA robot then grips the end plate in the tray and places it in the alignment position. - The end plate is gripped again and mounted on the WT. - Continues with the front assembly area. Technical Data Design: SCARA (4-axis robot) Load capacity: nominal 5 kg, max. 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Orientation reach: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Orientation repeatability: J4: +/- 0.005° Max. operating range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Max. operating speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400 °/s Permissible moment of inertia: nominal 0.02 kg*m², max. 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Pressing force: 250 N Weight: 48 kg Controller: EPSON RC180 Type of mounting: Ceiling IP protection class: IP20 Power and signal cable: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Condition: good (used), Soco System Packing Station System Ljdpfx Aexl Rn Tjl Neac 14,800 mm double-deck roller conveyor with 800 mm steel rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9,850 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive and two through-feed flaps 90° curve with conical rollers and two drives for heavy loads 6,000 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive 9,750 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, without drive 6 x Rocholz System Flex packing and work tables Carton magazine Workstation lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Storage shelf Width: 2,000 mm Depth: 800 mm 6 x 1,000 mm Transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers Switch and control cabinet Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping available upon request!

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Lajdpfx Aeu D E A Dol Nsc Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), ZIM Hülsta Cabinet Erector The cabinet erector is used to erect and transport assembled cabinets. Cabinet erectors are typically used with cabinet presses that have a continuous feed system. It facilitates the handling of large workpieces when erecting them. Transport and assembly device within a cabinet assembly line. Behind a continuous cabinet press, the pressed cabinets are laid on their backs using this device. This allows assembly work to be carried out on the underside. Manufacturer: ZIM Hülsta-Werke Type: Cabinet Erector Dimensions: Roller conveyor L x W x H: 2800 x 900 x 800 mm Roller width: 800 mm Tilting surface: L x W 1000 x 900 mm Power supply: 3 x 400 V AC Connected load: 2 kW Laodpfovdb Ixox Al Nsc Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U: the universal switchgear for industry and utilities Modular medium-voltage switchgear for solar power distribution Laedpfxsnfu Dyj Al Nec Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV IP: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1 s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast Resin High Voltage: 10 kV Low Voltage: 400-230 V Circuit: Dyn5 Year of Construction: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear is pressure-relieved via a pressure-relief chamber in the lower part of the switchgear panel. Documents: Test Report Circuit Diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Laodpfx Aeihiiiol Nsc Height: 3000 mm Unwinding stand Length 5020 mm 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Ljdpfx Asl Smn Sol Njac Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Financing through our bank is also possible. komplett-konzept.leasingo.de Ledpfxjh Dpxhs Al Nsac Further articles - new and used - can be found in our shop! International shipping costs on request!

Year of construction: 2012, condition: excellent (used), Agfa C95 developing station Laedpfx Aljirnmcs Njc -in good condition

Condition: used, Year of construction: 2015, Manufacturer: Segler Segler Model: 40255D Type: Big-Bag emptying / dumping station Year : 2015 Classification: Atex 112/30 135°C Materials: Stainless steel Connections : 1x DN300 Big-Bag anchoring system with pneumatic clamp, including 2-pneumatic manual override 1x Ø300 opening with DN65 lance, clamp connection and spray head for cleaning the anchoring system 1x R 1 1/2" sleeves for pre-assembled filling indicators 1x DN65 flange, including ball valve as outlet Hopper with external electric vibrator Laedpfxjx R A Ixj Al Njc Dimensions: 172 x 161 x 162 cm Weight: 300 kg

Condition: used, Year of construction: 2015, Manufacturer: Segler Segler Model: Andocksystem 40255B Type: Big-Bag emptying / dumping station Year : 2015 Classification: Atex 112/30 135°C Lasdex R A Irjpfx Al Nec Materials: Stainless steel Connections : 1x DN300 Big-Bag anchoring system with pneumatic clamp, including 2-pneumatic manual override 1x Ø300 opening with DN65 lance, clamp connection and spray head for cleaning the anchoring system 1x R 1 1/2" sleeves for pre-assembled filling indicators 1x DN65 flange, including ball valve as outlet Hopper with external electric vibrator Dimensions: 142 x 178 x 142 cm Weight: 260 kg

Year of construction: 2015, condition: excellent (used), Gentle filling of the shopping baskets with turned parts Lodpjra Eblsfx Al Neac

Year of construction: 2005, condition: used, Equipment Twin Multi Disc unwind station MTD-AWS-OWK • 2 MTD-AWS-OWK Combination unwinding station • 1 MTD-ZSF-LI-MSD Lodpfx Aloc Ihxrj Neac Stack pacer LAT • 1 LAT-2:1