Used Internal Thread Cutting Machine for sale (72,602)

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Codpfxju Tg Spj Aa Nsgp Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: used, Year of construction: 2009, internal diameter max. 600 mm grinding depth max. 800 mm grinding length max. 600 mm control Siemens 840 D grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm workpiece length - max. 380 mm external grinding length max. 600 mm travel - x1 axis 150 mm travel - z1 axis 1100 mm travel - x2 axis 470 mm travel - z2 axis 800 mm workpiece spindle 8,5 kW turning speed range - stepless 1-795 U/min Equipment / Accessories: Workpiece spindle unit (U/B1/L adjustment): - Travel (U-axis): 300 mm - Swivel angle (B1 axis): -0,5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Set-up speed (jogging): 10 rpm - Spindle head size A 8 according to DIN 55026 - Through-hole 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (overhung clamping) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of the internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Grinding block mounting hole (diameter): 100 mm / 125 mm - Mounting length of sanding block: 220 mm - Sanding diameter: max. 600 mm - Sanding depth: max. 800 mm External and surface sanding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel distance (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of the external grinding spindles: 7.5 kW - Grinding block mounting hole: Ø 140 mm - Sanding diameter: max. 800 mm - Sanding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Codpfxowp S Tnj Aa Nsgp

Year of construction: 2002, condition: used, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 1/min total power requirement 100 kW weight of the machine ca. 16700 kg Codpfx Asgtvbpoa Nogp dimensions of the machine ca. 5200x2300x2400 mm

Condition: used, Year of construction: 2012, Lot consists of: (1) CNC vertical grinding + hard turning center Codoym Sazjpfx Aa Nogp Technical Details: max. workpiece internal diameter 10 - 200 x 150 mm, 2 work spindles, 4 machining stations, CNC SIEMENS SINUMERIK 840D, tool turrets, chip conveyor, rapid traverse: X/Z: 90/30 m/min

Condition: good (used), Year of construction: 2002, Ref:11061 . 2002 Polar 78ES Guillotine Programable 78cm guillotine. Comprising: Central air bed Polar graphic operator guidance and colour TFT display Keyboard programming with static back gauge Computer programme with 99 programmes, 999 cuts instructions Metric/Imperial measurement scale Motorised back gauge / fast and slow speed with micro-adjustment Variable pressure hydraulic clamp Optical cut-line indicator Overload protection circuit 10 beam light barrier with FFM guarding 2 knives Tools and manuals. Specification: Cutting width, Max: 78 cm Clamp opening, Max: 11.5 cm Feed depth, Max: 78 cm Power required (main drive) : 1.9 kW Cgjdpjya E R Tefx Aa Nop

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, controller model: Siemens Sinumerik 840D, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 160 mm, Equipment: documentation/manual, Machine DURMA HD-FL 3015 III – 4 kW Year of manufacture: End of 2018 (as new) — Cjdpfx Ajynbbqoa Nsgp Technical Data • Working area (X-Y-Z): 3060 × 1530 × 160 mm • Max. sheet size: 3048 × 1524 mm • Max. sheet weight: 200 kg/m² Maximum sheet thicknesses: • Mild steel: 20 mm • Stainless steel: 14 mm • Aluminium (AlMg3): 12 mm Dynamics & Precision: • Travel speed X-Y: 200 m/min • Synchronisation speed: 280 m/min • Acceleration: 20 m/s² • Positioning accuracy: ± 0.02 mm • Repeatability: ± 0.1 mm — Standard Equipment • CE-compliant version with shuttle table & light curtain safety system • Siemens SINUMERIK 840D CNC control • Precitec ProCutter cutting head F150 (auto-focus) • Automatic pallet changer system • Automatic sheet inspection (position & size) • Positioning laser diode • Automatic nozzle cleaning • Central lubrication system • Chip conveyor • User interface (power / speed / pressure) • External Metalix CAD/CAM software with autonesting • Illuminated working area • Multi-chamber extraction system • Warning beacon — Special Accessories • IPG 4000 W fiber laser source incl. chiller & compact extraction unit • Motorized chip conveyor • Linear drives for X1, X2, Y axes • Laser service kit • Automatic nozzle changer • Additional Metalix license — Special Arrangements • Roller container for slag & small parts (operator side) • Laser source, chiller & extraction system mounted above the machine • Machine frame to be manufactured by the customer

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm Cgodow Ed S Ujpfx Aa Nep thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Year of construction: 1999, condition: used, pulling force - max. 6,0 t Cgjdpsd Il A Njfx Aa Njp max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours Cgedpfx Aaeivg Hgs Nep This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Cgjdpfov Iaqyox Aa Nop

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt Cedovdqkvopfx Aa Njgp 10/18 A 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm height 970 mm Weight 90 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, Manufacturer / Model Manufacturer: Flow (Flow International Corporation) Series: Mach 100 Model (Nameplate): M100-3020 Serial Number (Nameplate): 190030 Wired to DWG: 046990-1 (DWG Rev. Level: N) Assembled by: Kun Ma Country of Origin (Nameplate): Made in China Flow International Corporation, Kent, WA 98032, USA Working Area / Dimensions (Manufacturer Specifications) Base Axis (X): 1.3 m / 3 m / 4 m Gantry (Y): 1.3 m / 2 m Z-Axis Travel: 180 mm Note: For your machine, '3020' typically indicates approx. 3,000 x 2,000 mm (which corresponds to X = 3 m / Y = 2 m from the manufacturer options). Accuracy / Dynamics (Manufacturer Specifications) Linear Axis Accuracy: ± 0.1 mm/m Repeatability: ± 0.06 mm Circularity: ± 0.1 mm Max. Traverse Speed: 10 m/min Acceleration: 0.02 g Electrical / Power (Specific Machine, Nameplate) Power: 6.5 kW Current: 20 A (Field "Current") Voltage / Frequency / Phases: (presumably 3~; voltage appears to be 380 V in the field "Voltage/Frequency/Phases", will confirm 100% upon inspection). High-Pressure Pump Drive (Soft Starter) Description: Soft Starter High Pressure Pump Motor Manufacturer/Type: Danfoss MCD-202 Part No.: A-24416 Revision: A08.2011 Production Date: 07/2019 Serial No.: F0357 0719-WS Line Voltage: 3AC400V Frequency: 50 Hz Power Rating: max. 37 kW Nominal Current: max. 72 A Main Power Supply: max. 80 A Label Note: Flow Europe GmbH, Gutenbergstraße 10, D-64331 Weiterstadt (Germany) Abrasive System / Additional Units Unit: Flow PASER CF900 (Abrasive / Feed Unit) Model: CF900 Serial Number: 190247 Manufacture Date: 04/2019 Electrical Ratings: 100–240 VAC or 24 VDC, Single Phase Frequency: 50/60 Hz FLA: 0.20A240VAC / 0.48A100VAC / 2.00A24VDC LLA: 2.0 A Short Circuit Current: 16.0 A SCCR: 2.5 kA Assembly Number: 1000061-1 Air inlet pressure: 8.6 bar max / 125 PSI max Made in China Manufacturer Specifications – Possible Configurations (Brochure) Maintenance Packages UltraPierce Drilling Aid Splash Guard FlowTexturing (FTT) ecoFlow Abrasive Removal System FlowNest Cgedpfx Aaoyri Itj Nsp FlowXpert Laser Pointer Clamping and Fixing System Pure Water Retrofit Kit

Condition: used, Year of construction: 1958, honing diameter 40-420 mm stroke 15-6500 mm centre height 520 mm workpiece length 6500 mm workpiece dia. 1000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Cgodpfoyqvgyex Aa Nep apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cgjdpfjyk Dgzjx Aa Nop Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: new, Year of construction: 2026, table length 3000 mm table width 1500 mm burner heads 1 Control CNC Cedpexv D T Rsfx Aa Negp workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: used, Year of construction: 1990, cutting width 92 cm Cgsdpfx Aeyrtx Asa Nep feeding depth 92 cm feeding high max. 12 cm

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, 1 Internal and Surface Grinding Machine Manufacturer: WEMA Glauchau Model: SI 6/1 AS-Nx500 Year of manufacture: 1989 Grinding depth: 500 mm Workpiece spindle speed range: 40 – 400 rpm Cjdoyn D Imjpfx Aa Nsgp Distance from workpiece spindle flange to grinding spindle carrier: 1450 mm Adjustment travel of internal grinding device: 530 mm Max. workpiece diameter: 500 mm Distance from workpiece spindle flange to steady rest: 280 – 650 mm Internal grinding diameter: 40 – 400 mm External grinding diameter: 400 mm Rapid traverse: 10 m/min Grinding feed rate: 0.1 – 8 m/min Machine weight: 6.5 t.

Condition: used, Year of construction: 2014, Plasma cutting machine Manufacturer: Microstep Model: MasterCut-P 3001.20 Year of manufacture: 2014 Cgsdpfx Aajypdl Is Njp Operating hours approx.: 7,024 Control: iMSNC Working area: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with Allgas console Integration of HiFocus 280i plasma source into the control system Remote maintenance access via TeamViewer 15 m hose package Without extraction system 1 x nesting software Asper Win Basic + automatic nesting installed on machine control Allgas = allows changing the gas to adapt cutting quality and cutting speed to the material.

Condition: used, Year of construction: 2007, operating hours: 19,000 h, functionality: fully functional, overall weight: 30,000 kg, total width: 2,500 mm, total length: 9,000 mm, total height: 2,500 mm, working width: 900 mm, saw blade diameter: 32 mm, input voltage: 380 V, Used machine Still in daily use saw Incl. saw bands Codpfx Aewyggksa Njgp and return feed system standard standing control

Year of construction: 2000, condition: used, Punching machine Noble Cgedsg Dgyxjpfx Aa Nsp HM 35/350 BKE 200/5 Maximum pressure 35 T 5 mm sheet thickness at 40 kp/mm²

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench Cgsdpfoyk Upyex Aa Nop -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm -Weight: 9.1 kg

Condition: used, functionality: fully functional, Year of construction: 2007, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Cedpfx Ajxzpuwsa Negp

Condition: excellent (used), Year of construction: 1994, Description to follow! Cgsdpfx Aaoyrtwro Nop

Condition: excellent (used), Year of construction: 1985, Description to follow! Cgsdpfxeyrtvze Aa Nep

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Laser on: 42,130 h Cjdpfx Asxfim Ioa Nsgp