Used Jet Jbos 5 for sale (58)

Condition: like new (used), DISPLAY MACHINE For sale is an as-new JET double-drum sander DDS-237, equipped with a powerful 7.5 HP, 400 V motor and a maximum sanding width of 940 mm. The display machine is in original condition; therefore, you receive the full warranty. Technical data: - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction ports: 2 x 100 mm diameter - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm Codjycc R Nspfx Abuspu - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipping: Austria: €180.00 including VAT Germany: €210.00 including VAT South Tyrol: €240.00 including VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400 V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Reference: R-A0117

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. Csdpfoyb Sfaox Abuepu The demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Condition: like new (used), DISPLAY MODEL For sale is an as-new JET Mortising Machine 719-AS equipped with a powerful motor for demanding applications. The display model is in its original condition, so you benefit from the full warranty. Technical specifications Cedpfxoyb Sbne Abujpu - Motor: 230 V / 1,300 W - Spindle speed: 1,450 rpm - Max. chisel size (hard/softwood): 19 x 19 / 25 x 25 mm - Keyless drill chuck: 13 mm - Max. workpiece height: 195 mm - Max. chisel stroke: 200 mm - Table travel (longitudinal/cross): 400 / 100 mm - Table tilt: 0 – 35° - Table dimensions: 520 x 180 mm - Workpiece stop: 520 x 90 mm - Max. distance from chisel center to stop: 100 mm - Machine dimensions: 650 x 500 x 1760 mm - Weight: 125 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €75.00 incl. VAT Germany: €95.00 incl. VAT South Tyrol: €125.00 incl. VAT Related terms: JET 719-AS, mortising machine, slot mortising, wood jointing, 230 V drive, 1300W power, professional tool, workshop equipment, precision engineering, woodworking Reference: R-A0117

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Advantages: Further information regarding the bagging machine: System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Cpsdpew Ttxfofx Abusu Maintenance costs: The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year.

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), The CE100 series is an electrically driven high pressure machine for a pressure of 300 to 2000 bar and a volume flow of 21 to 135 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE100-300-135 CE100-500-80 CE100-1000-42 CE100-1400-28 CE100-2050-21 Cpodpohga N Tsfx Abuju 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 75 kW (50Hz) / 90 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 81A (50Hz) - 108A (60Hz) Dimensions: 1800 mm x 1050 mm x 1400 mm Weight: 2000 kg Standard accessories included.

Condition: excellent (used), !!!DEMONSTRATION MACHINE!!! For sale is an as-new JET DDS-237 sanding machine with a maximum sanding width of 940 mm. The machine is in excellent condition and has been refurbished and inspected by our specialist staff. (Fully functional) Cpjdpfxox Sqzve Abuou Technical data: - Double drum sander JET DDS-237 - Motor: 400 V / 7.5 HP - Sanding drum speed: 1,400 rpm - Feed speed: 3 m/min - Max. sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: column drill, pillar drill, drilling machine Reference: R-D1618

Condition: new, Year of construction: 2025, functionality: fully functional, repeat accuracy: 0.025 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 310 mm, positioning accuracy: 0.025 mm, type of input current: three-phase, input voltage: 380 V, sheet thickness aluminum (max.): 300 mm, operating speed: 15,000 mm/s, pressure: 4,150 bar, warranty duration: 24 months, cutting speed: 15,000 mm/min, travel speed (max.): 20,000 mm/min, table load: 1,200 kg, year of last overhaul: 2025, product height (max.): 300 mm, Brand new Waterjet Cutting Machine 💧 Waterjet Cutting Machine X-JET 2040 – PROFESSIONAL – Made in Poland 🇵🇱 🔧 Polish manufacturing – top quality and precision! The modern, fully professional X-JET waterjet cutter is designed for the most demanding customers. Thanks to the latest technologies and a rigid frame design, the machine guarantees excellent cutting quality, high precision, and long-term durability. 🔹 Key Features: Working area (3-axis): 2000 x 4000 mm Codov Tmxuepfx Abuopu X/Y traverse speed: up to 20,000 mm/min Positioning accuracy: ±0.025 mm Repeatability: ±0.025 mm Max. table load: 1200 kg/m² Sealed linear motion units + servo drives Centralized electronic lubrication system Advanced CNC control + IGEMS CAD/CAM 2D/3D Optional 💥 5X Cutting Head: Taper angle compensation and bevel cutting up to 45° Drive: Harmonic Drive + Spinea TS Pneumatic on/off valve with diamond nozzle Automatic cutting height adjustment Z-axis and tool calibration 🧠 Intelligent Systems: 12 MP camera Automatic tool angle adjustment system Precision 5x cut calibration system 💦 High-pressure Pump: Max. working pressure: 4150 bar (60,000 psi) Constant pressure: 3792 bar (55,000 psi) Flow rate: up to 3.8 l/min Nozzle diameter: 0.10–0.35 mm High-quality intensifier and proportional valve Quiet operation and touchscreen control ⚙️ Additional Equipment: Automatic abrasive removal system – WAWE 170 Professional abrasive feeder – DUNA 1100 Water treatment system with reverse osmosis Efficient sludge extractor – 170 l/min 📍 Made in Poland – local product with global capabilities. 💬 Feel free to contact us! We are happy to send you the full technical documentation and prepare a tailored offer. Custom machine dimensions and any configuration available on request. *(Images are for reference only; the offer refers to a 1.5x3m, 3-axis machine.)

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 940 mm, grinding height: 150 mm, – Year of manufacture: 2007 TECHNICAL SPECIFICATIONS: – Grinding width: 940 mm – Grinding height: 150 mm – Min. workpiece thickness: 0.8 mm – Min. workpiece length: 230 mm – Feed motor power: 0.25 HP – Main motor: 5.55 kW – Grinding rollers: 2 x ø 152 x 940 mm – Speed: 1400 rpm – Feed speed: 2 or 3 m/min – Extraction port diameter: 2 x ø 100 mm – Motor power: (400 V) 5600 W / S1 100% – Dimensions (L/W/H): 1090 / 1420 / 1090 mm Cedpjw Ip Rtofx Abujpu – Weight: 440 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l Cedpfx Abexgumceuspu – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA Cpsdpoxgua Asfx Abusu 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: ready for operation (used), Year of construction: 2008, Table size: 220 x 820 mm Table size (front table): 250 x 350 mm Grinding wheel dimensions: 150 x 2260 mm Grinding belt speed: 16 m/s Drive motor: 400 V, 1.5 kW Cpedpfjv Efn Sex Abuju Weight: 164 kg Space required: 1200 x 600 x 1250 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Cpedpjhgblkofx Abuou Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: Cjdpfxshgbhnj Abujpu ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 9558, Used fully functional WJS waterjet cutting machine with KMT SLIV 50 HP pump. Machine is in disassembled condition and can not be inspected. Installation and commissioning will be done by us and is not included in the price. Csdpfji Hckrjx Abujpu The machine can also be completely overhauled ( new control cabinet, new control and new CE. This would mean a surcharge of about 50.000€)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE200 series is an electrically driven high pressure machine for a pressure range of 200 to 2500 bar and a volume flow of 25 to 350 l/min. The frame consists of hot-dip galvanised sheet metal mouldings and stainless steel side frames. Four rubber feet ensure safe positioning. The lifting eye facilitates the transport of the machine. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz -bar-l/min. CE200-200-280 60 Hz -bar-l/min. CE200-200-350 and others on request. General specifications: ----- Drive motor power: 150 kW (50Hz) / 150 kW (60Hz) Cpodpfx Abshga S Douju Volt: 400V (50Hz) - 440V (60Hz) Amp: 160A (50Hz) - 180A (60Hz) Dimensions: 2100 mm x 1200 mm x 1400 mm Weight: 2200 kg Standard accessories included.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE20 belongs to the series of our electrically operated high pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame is made of hot-dip galvanised and powder-coated sheet metal mouldings with stainless steel side frames all round. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and the slim version are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Models available: ----- 50 Hz-bar-l/min. CE20-200-38 CE20-280-26 CE20-350-23 CE20-400-20 CE20-500-16 60 Hz and others see data sheet and on request. General specifications: ----- Power of drive motor: 15 kW (50Hz) / 15 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 28A (50Hz) - 26A (60Hz) Dimensions: 950 mm x 720 mm x 800 mm Dimensions SLIM: 950 mm x 500 mm x 800 mm Weight: 175 kg Standard accessories included. Csdpohf Nbdofx Abuepu

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CE40 belongs to the series of our high pressure machines with an electric drive for a pressure of 100 to 2000 bar and a volume flow of 9 to 160 l/min. The frame consists of hot-dip galvanized sheet metal mouldings and surrounding side frames made of stainless steel. The front wheel and the two large rear wheels including a parking brake ensure easy manoeuvring and stable stationing. A lifting eye facilitates transport. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- 50 Hz-bar-l/min. CE40-100-160 CE40-160-100 CE40-230-75 CE40-400-40 CE40-550-30 CE40-700-23 CE40-800-20 CE40-1000-18 CE40-1250-13 CE40-1380-12 CE40-2000-9 60 Hz and others see data sheet and on request. General specifications: ----- Drive motor power: 30 kW (50Hz) / 33 kW (60Hz) Cpedpfjhga Irjx Abusu Volt: 400V (50Hz) - 440V (60Hz) Amp: 57A (50Hz) - 57A (60Hz) Dimensions: 1600 mm x 1050 mm x 1150 mm Weight: 650 kg Standard accessories included.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CP22 belongs to the series of petrol-powered high-pressure machines with a pressure of 170 to 500 bar and a volume flow of 16 to 46 l/min. The machine has pneumatic tires with a parking brake on the rear axle and castors on the front axle. The frame consists of hot-dip galvanized and powder-coated sheet metal parts with all-round side frames made of stainless steel. The machine measures 1060 x 760 mm and is 850 mm high. The Honda engine is equipped with an electric starter. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Cpjdpfshga U Aox Abuju Model Pressure Flow CP22-170 170 bar 46 Lpm CP22-220 220 bar 36 Lpm CP22-280 280 bar 27 Lpm CP22-350 350 bar 23 Lpm CP22-500 500 bar 16 Lpm General specifications: ----- Drive motor: 2 cylinder 4-stroke petrol engine, electric start Drive motor power: 16.4 kW Drive motor speed: 3600 rpm Optional: with hand throttle Tank: 28 L Max. fuel consumption: 6.8 L/h Dimensions and weight: Standard: 1100mm x 750mm x 1080 mm (160 kg) Standard with tires: 1100mm x 1050mm x 1080 mm (170 kg) 400l version: 1300mm x 1120mm x 1250 mm (250 kg) 800l version: 1300mm x 1490mm x 1250 mm (280 kg) Includes standard accessories.

Year of construction: 2023, operating hours: 1 h, condition: as good as new (ex-display), The CD100 series of water and water jet machines range from 250 to 2050 bar with pump flows from 21 to 167 l / min. The pump is driven by a water-cooled 4-cylinder turbo SISU diesel engine. The frame surrounding all frames is made of hot-dip galvanized steel for long life and corrosion resistance. It is primed and painted. The footprint of the machine is 2100 x 950 mm. The frames are fitted with rubber feet under all four corners and the machine has forklift pockets and suspension eyes at all four corners. The machines have galvanized roof panels with side railings for protection and storage of, for example, high pressure hoses. Similar but not Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD100-250 250 bar 167 Lpm CD100-300 300 bar 135 Lpm CD100-500 500 bar 80 Lpm CD100-1000 1000 bar 42 Lpm CD100-1400 1400 bar 30 Lpm CD100-2050 2050 bar 21 Lpm General specifications: ----- Max. Pump speed: 750 rpm Drive engine: 4 Cyl. Sisu Turbo Diesel water cooled Drive motor power: 74.6 kW Drive motor speed: 1800 rpm Csdpfx Abohgbgqjuepu Tank capacity: 140 L Max. Fuel consumption: 16.0 L/h Loudness (1m): 84 dBa Dimensions and weight: 2250mm x 950mm x 1300 mm (2000 kg) Standard accessories included.

Year of construction: 2022, operating hours: 1 h, condition: as good as new (ex-display), The CE10 series is an electrically powered high pressure cleaner. This model is the ideal tool for general cleaning jobs. Built into a stainless steel frame, this robust pressure washer is easy to move and can be equipped with various accessories such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Models available: ----- CE10-series L/min CE10-200 bar 21 10 hp water blaster unit 50Hz CE10-200 bar 25 10 hp water blaster unit 60Hz Cpedpfxohf Na Io Abusu CE10-200 bar 21 10 hp water blaster unit 50Hz with start/stop CE10-200 bar 25 10 hp water blaster unit 60Hz with start/stop CE10-250 bar 15 10 hp water blaster unit 50Hz CE10-250 bar 18 10 hp water blaster unit 60Hz CE10-250 bar 15 10 hp water blaster unit 50Hz with start/stop CE10-250 bar 18 10 hp water blaster unit 60Hz with start/stop General specifications: ----- Drive motor power: 7,5 kW (50Hz) / 9 kW (60Hz) Volt: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Standard accessories included.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, input voltage: 230 V, overall weight: 135 kg, input frequency: 5 Hz, Further technical data: Sanding height: 160 mm Suction connection: 100 mm Speed: 1400 rpm (spindle) oscillating including sanding spindles Cpedpfxju E Tb Rs Abuju

Year of construction: 2017, condition: ready for operation (used), Cutting heads: 2, cutting head type: AWJ 2D, abrasive feed: system SM4000, pump type: KMT Streamline SL-VI Standard, max. pump pressure: 3800bar. Table dimensions X/Y: 3200mm/1710mm, cutting dimensions X/Y: 3010mm/1510mm, travel range X/Y/Z: 3010mm/1510mm/250mm, travel speed: 12m/min, cutting head distance range: 90mm-450mm, positioning accuracy: +/-0.075mm, repeatability: +/-0.035mm, control: Fanuc 0i-MF, operating hours: 4866h. Includes oil cooler, water treatment, and safety zone. Documentation available. On-site inspection possible. Cedpfx Aoxp Rcfjbuepu

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 95521, Water Jet Sweden NCP 4020 D Year of manufacture: 2009 1.1 TECHNICAL DATA 1 x Water Jet Cutting Machine, NC 4020 D 1 x FANUC 310iA control unit 1 x IGEMS CAD/CAM software 2 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed units 1 x KMT Jetline, 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit & control cabinet Cpjdpfx Aew Snybjbuou 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine safety enclosure 1 x PanelOne HMI "EDGECUT" operator interface 1 x Remote control for high-pressure pump 1 x Remote maintenance 2 x Diaphragm pump and extraction units 1 x Waste container, 1000 l 1 x Pressure vessel, 200 l, and 1-ton online abrasive conveyor/online abrasive container 1 x Starter hole drilling unit 1 x MPG, portable manual control unit 1.1.1 MACHINE DATA Table dimensions (W x D): 4200 x 2275 mm - Cutting area (W x D): 3980 x 2010 mm - X-axis travel (2D): 3530 mm - Y-axis travel (2D): 2010 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse X: 30,000 mm/min - Rapid traverse Y: 15,000 mm/min - Rapid traverse Z: 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V + PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS

Condition: used, Small character inkjet printer Cpedpfxjcbmpue Abuou -machine is untested and is sold as a spare parts carrier- "The proven products of the Videojet EXCEL family mark all surfaces, continuously, contactless, flexible and extremely reliable. Already 200,000 Videojet systems are in use in production plants worldwide to print variable data on a daily basis! All printers of the EXCEL family have a RS-232/V24 data interface for integration into your production line. A enclosed stainless steel housing protects against splash water and corrosion (according to industrial standard IP 65) and makes our EXCEL printers extremely resistant, even under the toughest production conditions. The backlit LCD display with clear labeling available in many languages is simple and easy to read even from a distance. The SUREPRINT software controls individual ink droplets, their flight characteristics, distances and viscosity. It ensures a perfect print image through high operator comfort."

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Cpodpfxsnab Sij Abueu We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!