Used Keyway for sale (104)

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical snowplow with 10 snowplow blades and numerous mounting points. Drive system with a Stöber gearbox, providing infinitely variable speed control. Chodpfo Agn U Aex Abred

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Milling Machine - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Keyway length in a single pass: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds Cjdpszv Edqefx Abrehd - Electric chuck guard - Good overall condition, ready for operation Dimensions: L x W x H 0.9 x 0.6 x 1.5 meters / Weight: 300 kg Subject to errors and omissions.

Condition: excellent (used), Year of construction: 1991, Keyway broaching machine Elmass, suitable for keyways up to 14 mm wide. Maximum working stroke 200 mm. Thanks to the bore-guided tool, this Elmass system can also be used to broach extra-long keyways. Tools for standard bores with diameters of 6-50 mm and keyway widths of 2-14 mm are available. This tool system is also suitable for blind hole drilling. Cedpfx Absld S S Sorohd Thanks to the 400 mm rotary table, multiple keyways can also be broached.

Condition: excellent (used), Type: U3E1000 Machine no.: 17098 Year of manufacture: 1982 Chsdpfx Abszvq Axsrod Data: Engine power: 3 kW Pull length: 1000 mm Dimensions, W x D x H approx.: 900 x 700 x 1600 mm Weight (estimated): 300 kg ... 3 clearing needles

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Csdpozw H Hiefx Abrjhd Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Codeznn Hrjpfx Abrehd Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Hydraulic workshop press, keyway milling press, groove milling press Hydraulic workshop press, custom-built, MaVo type 5t-20 Used for milling keyway grooves in through-holes. Pressing force: 5 tons (at 100 bar hydraulic pressure) Stand width: 770 mm Cylinder stroke: 220 mm Distance from threaded piston rod to table traverse: max. 900 mm Pressing speed, ram downwards: approx. 11.5 mm/sec. = 220 mm in 19 sec. Pressing speed, ram upwards: approx. 24.5 mm/sec. = 220 mm in 9 sec. Motor power: 5.5 kW Mains connection: 400 volts, 50 Hz - 2-hand control (one button for pump on, 1 button for downwards, 1 button for upwards) - Hydraulic pump HAWE, type K5/3 (can also deliver 400 bar, but the pump is very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm length - 2 support plates Cjdpjwki Apsfx Abrohd - Very stable steel construction made of 140 series double T-beams - Estimated load-bearing capacity of the steel construction: 40 tons or more - Can be moved with a pallet truck Space requirement L x W x H: 1200 x 930 x 2280 mm Weight: 485 kg

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Chjdpfx Abewu Suvjred Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1972, operating hours: 24 h, machine/vehicle number: 2025, overall weight: 5,200 kg, power: 10 kW (13.60 HP), input voltage: 380 V, input frequency: 50 Hz, broaching length: 320 mm, workpiece diameter (max.): 630 mm, total length: 2,650 mm, total width: 1,810 mm, total height: 2,890 mm, Slotting Machine STANKO 7M430 The STANKO model 7M430 is a heavy-duty vertical slotting machine, designed for machining internal keyways, slots, internal splines, and profiled surfaces in large and heavy workpieces. Manufactured in 1972, this machine is intended for industrial applications requiring robust construction, high rigidity, and reliable operation. The machine is equipped with a rotary worktable with a diameter of 630 mm, allowing flexible positioning of workpieces. The maximum stroke length of the ram is 320 mm (minimum stroke 120 mm), providing a wide working range for various slotting operations. The slotting head can be swivelled ±10°, enabling angular machining and increased versatility. Feeds along the X- and Y-axes are adjustable in the range of 0.2 to 2.4 mm per double stroke, while the rotary feed of the table can be set from 0.1 to 1.4°, ensuring precise control of cutting parameters. The maximum permissible table load is 3000 kg, making the machine suitable for large and heavy components. The distance from the table surface to the chisel guides is 500 mm, and the machine offers generous table travels: 650 mm longitudinal, 500 mm transverse, with 360° table rotation. The drive motor has a power rating of 10 kW, providing sufficient cutting force for demanding machining tasks. With overall dimensions of approximately 2650 × 1810 × 2890 mm and a total weight of about 5200 kg, the STANKO 7M430 features a rigid cast-iron construction that ensures excellent vibration damping and long-term stability. Condition: *Used machine Chedpfx Asx U Tr Asbrjd *Ready for operation *Fully functional *Operating hours: approx. 24 h Scope of delivery: *Complete set of change gears *Technical passport (Russian) *Operating manual (Russian) Typical applications: *Slotting of internal keyways *Machining of internal splines *Profile machining of internal surfaces *Machining of large and heavy components *General mechanical engineering and repair work

Condition: excellent (used), SECO Minimaster holder MM 12-20 150.4 (28657) Slot milling cutter in case with 4 inserts MM 12-12008 RO8 P 40 Chodpfx Ajw Iczxjbrsd

Condition: ready for operation (used), Year of construction: 2021, operating hours: 2,928 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 276 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 755 mm, spindle motor power: 25,500 W, overall weight: 6,250 kg, controller manufacturer: SIEMENS, controller model: 840D with ShopTurn, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DMG MORI CLX 450 V6 was manufactured in 2021. It features a maximum turning diameter of 400 mm, X-axis travel of 276 mm, Y-axis travel of ±60 mm, and Z-axis travel of 755 mm. The machine is equipped with a 12-position VDI 40 turret and a powerful spindle with a maximum speed of 4,000 rpm. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CLX 450 V6 machine we have for sale. Contact us for further details. • Control: Siemens 840D with ShopTurn • HMI: DMG MORI SLIMline Multi-Touch, 19" touchscreen • Spindle operating hours: approx. 2,928 hWorking capacity and axes • Axes: X, Y, Z; C-axis on main and counter spindle • Max turning diameter: 400 mm • Swing over bed: 700 mm • Swing over cross slide: 370 mm • Rapid traverse: X/Z 30 m/min; Y 22.5 m/minMain spindle • Spindle nose: A2-8 • Bar capacity: 80 mm • Power: 25.5 kW (40% ED) / 17 kW (S1) • Torque: 426 Nm (40% ED) / 283 Nm (S1) • Differential clamping pressure functionCounter spindle • Max speed: 5,000 rpm • Spindle nose: A2-6 • Power: 14 kW (40% ED) / 13 kW (S1) • Torque: 192 Nm (40% ED) / 171.5 Nm (S1) • Differential clamping pressure function • Internal chuck flushing • Auxiliary tailstock functionTool turret and driven tools • 12-position VDI 40 turret with 6 additional BT stations • Driven tools: up to 4,000 rpm • Driven-tool power/torque: 5.44 kW (40% ED) / 20 Nm (40% ED)Equipment/options (machine-integrated) • Setup package: 12-bar coolant supply system; 5-bar coolant washdown gun • Safe clamping package Cjdpfx Abez Inlxjrehd • Connectivity: DMG MORI IoTconnector; DMG MORI Messenger V4 • Siemens software options: Multi Threading 2.0; Variable spindle speed; Y-axis parting cycle; Keyway Broaching cycleElectrical data • Supply voltage: 400 V ±10%, 50 Hz • Phases: L1, L2, L3, N, PE • Connected load: 39 kVA • Max rated current: 56 A Technical Specification Counter Spindle Yes Driven Tools Yes

Year of construction: 1989, condition: used, Manufacturer: Hönnema Model: KAT 63/1250 Year of manufacture: 1989 General / technical data: CNC grooving machine with partial or rotary table for twist grooving. Max. stroke: 1250mm Cutting speed: stepless from 0 to 16m/min Max. Return speed: 16m/min Max. Groove width: 63mm Fully automatic twist dividing attachment: RA 450 AUDR Csdpfx Ajlu D Hkjbrohd Remark: The feed is made by stepping motor and ball screw through the machine table. The machine table has a stable and smooth-running linear guide. The machine is approx. 1.500mm under floor! The machine is under power in our warehouse and can be inspected.

Condition: used, Electric motor, E-motor VEM Three-phase motor, high-voltage motor Type IE3-W41R 250M 2 LL TPM HW Design B3 Frame size 250M Motor power 55 kW Chjdpe Ah Iiqjfx Abrod Motor speed 2970 rpm Current consumption 92 Amperes Power supply 400 Volts, 50 Hz Shaft diameter Ø 60 mm Shaft extension length 155 mm Keyway width in the shaft 18 mm - Foot-mounted motor with 4 mounting holes Ø 24 mm, hole spacing 400 x 350 mm Overall length of motor housing without motor shaft 780 mm Overall length of motor housing with motor shaft 930 mm Space requirement L x W x H 730 x 400 x 520 mm Weight: 510 kg Good condition

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, feed length X-axis: 2,500 mm, feed length Z-axis: 3,200 mm, workpiece weight (max.): 25,000 kg, travel distance X-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 51,000 W, chuck outer diameter: 2,500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1,500 rpm, turning diameter: 3,000 mm, total height: 3,000 mm, type of input current: three-phase, turning height: 3,200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 150 rpm, torque: 452 Nm, overall weight: 40,000 kg, year of last overhaul: 2022, Machine was overhauled in 2022 with new spindle servo motor and control unit The machine is under power and can be checked in our workshop Details are as below. Fagor 8055i-TC-4 Cnc Kontrol Ünitesi ii) 512 Mb Harddisk iii) Look Ahead (200 Blok Önden Okuma) iv) USB ve RS232 Haberleşme Protokolleri v) Türkçe Kullanım Paneli, vi) Türkçe Alarm Listesi vii) Parametrik Programlama Özelliği Chedpjzl H Ipofx Abrjd viii) 12 Dil Kullanım Seçeneği ix) Manual yada Otomatik Takım Kalibrasyon x) Vidalı Mil Telafisi (Ballscrew Compensation ) xi) Kontrol Üzerinde Ballbar Testi ve Osilascop Özelliği xii) 4 Eksen Motor & Sürücü Kontrol Kabiliyeti xiii) Uzatmalı standart El çarkı (3 M) xiv) 3 Eksen Fagor Servo Motor & Sürücüleri Spindle Servomotor, Power (S1/S6) 51/71 kW, Nom. Torque (S1) = 325 Nm, Max Torque 1 FM7-A510-C3B1-E01 (S6) = 452 Nm, 1500 / 5000 rpm Integrated C AXIS Encoder, Foot Mounting,, Keyway, Protection Degree IP44, ")

Condition: used, New three-phase electric motor, 37 kW, SIEMENS three-phase motor High-power motor, electric motor, squirrel-cage rotor, asynchronous motor Type: 1LE16032AA590GB4-Z Design: V1 Frame size: 200L Chsdpfx Abo Ah Igyjrod Motor speed: 2955 rpm Current draw: 68 amps Motor power: 37 kW Mains connection: 400 volts, 50 Hz Shaft diameter: Ø 55 mm Shaft extension length: 110 mm Keyway width in the shaft: 16 mm Flange outer diameter: 400 mm Centering diameter: 300 mm Bolt circle: Ø 350 mm - Flange motor with 4 mounting holes Ø 19 mm Overall length of motor housing without motor shaft: 640 mm (without protective cover) Overall length of motor housing with motor shaft: 740 mm (without protective cover) Space requirement L x W x H: 740 x 400 x 520 mm Weight: 250 kg Very good condition – new, unused, from stock clearance

Condition: used, Drive motor: BAUMÜLLER Main spindle motor: DC shunt motor, servo motor Permanent magnet DC servo motor, type GNAF 112 LV Serial no.: 843016 Year of manufacture: approx. 1985 Rated power: 20 kW Operating voltage: 400 VDC Rated current: 56 A Maximum speed: 3000 rpm Excitation voltage: 310 VDC Excitation current: 1.8 A Tacho: Baumüller, type GHT 68/22 Tacho voltage: 20 V / 1000 rpm Tacho current: 5 mA Max. 8000 rpm Cjdpfx Aj Ah Ignsbrshd - Flange connection for cooling fan Shaft diameter: 28 mm (shaft with 8 mm keyway) Shaft length: approx. 55 mm (shaft projection from centering edge) Centering diameter: 180 mm, 4 mm height Bolt circle diameter: 215 mm, 4x 14 mm holes Overall length: 620 mm (without shaft and centering flange) Overall dimensions L x W x H: 700 x 225 x 225 mm Weight: 100 kg Good condition Suitable cooling fan available in the shop under stock number 55670.

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT. Chodpsx D Dihjfx Abrsd

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, overall weight: 1,100 kg, total length: 1,359 mm, total width: 500 mm, total height: 650 mm, gear ratio: 160, torque: 32,000 Nm, shaft diameter: 160 mm, 1 piece, very little used industrial spur gear reducer for conveyor systems, cranes, and lifting drives. This gear reducer was installed on a freight train cable shunting system. However, this shunting system was never used. The gear reducer was stored dry in a winch house. A PDF data sheet is available here under the advertisement description! Manufacturer: Penig / ASUG GDR Type: TGL 34611 / 10A2-355x160 Rated power: P = 21.4 kW Torque: 32000 Nm Gear ratio: i = 160 Actual gear ratio: 152.230 Speed n1: 950 rpm Speed n2: 6.24 rpm Input shaft diameter: 35mm x 80mm Output shaft: Solid shaft Ø 160mm x 300mm The second part of the pin coupling is also available. The bore in this half is 125 mm. Chjdpfx Aszimqrobrsd !! The pin coupling is not included in the stated selling price !! Dimensions: Length: l4 = 1359 mm Width: b1 = 500 mm without shaft Height: h4 = 650 mm Shaft height: h1 = 315 mm Weight: 1100 kg The gear reducer series includes two-, three-, and four-stage gear reducers with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing of a particular design size are the same for two-, three-, and four-stage versions. In the four-stage version, the drive shaft is located below the parting plane. The housing is generally made of cast iron. The gear reducers can be operated in both directions of rotation.

Condition: ready for operation (used), Keyway cutting machine FRÖMAG RAPIDA 463 incl. INDEXING TABLE - Machinable keyway width: 3 - 63mm - Maximum keyway length: 600mm - INDEXING TABLE - For bores from 10 - 500mm - Feed rate: 0.01 - 0.25mm - Cutting speed, infinitely adjustable: 2 - 22 meters/min - Return speed / constant: 50 meters/min - Load capacity max. 3000 kg - Connection power: 4.6 kW - Includes work platform - Various keyway cutters / accessories & tool cabinet Dimensions: L x W x H 1.6 x 1.5 x 2.3 meters / Weight 3500 kg Csdpfxszl Aiis Abrjhd Errors and omissions excepted.

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Codpozlt Euofx Abrehd EKS key interlock USB (ST01) 92750 EUCHNER

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 30 kg, input voltage: 400 V, rotor diameter: 600 mm, year of last overhaul: 2023, power: 1.1 kW (1.50 HP), Balancing machine upgraded in 2009. Chodpfx Aboq Umcrjrsd 1 Machine base, welded construction 1 Balancing unit Vertical, single plane, permanently calibrated, 1 special spindle with centric flange 1 piezo-electric vibration sensor 1 3-phase drive motor of 1.5 kW, driven by a belt 1 Protractor disk 300 mm diameter, with 360 °, mounted on the spindle 1 Safety guard For diameters up to 600 mm and heights of 420 mm 1 SCHENCK CAB 803 measuring device - With direct data entry system via touch screen - Industrial PC with active TFT color monitor - Visualization of results via vector meters - Network capability - Polish dialogue - Modular, easy-to-use system design - Optimized signal processing system via digital Schenck MMD filter - Intelligent, self-diagnosing measurement electronics system - Operation using standard Windows routines - Programs for: - Straight compensation, keyway, compensation index - Tolerance calculation according to ISO 1940 - Log report in PDF format Balancing speeds from 0 to 720 RPM - Smooth Max residual unbalance 5 - 10 gmm (DIN 1319)

Condition: used, Year of construction: 1966, Max. pulling force: 5 t, max. stroke: 850 mm, max. cutting speed: 12 m/min, max. return speed: 25 m/min, clamping area: 410 x 575 mm, groove width: 3 - 90 mm, drilling diameter: 13 - 500 mm, workpiece weight: 6000 kg, depth of the machine base below floor level: 1,400 mm. Chodocm Elnepfx Abrod

Condition: refurbished (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 3615/673, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 3 mm/s, total length: 750 mm, total width: 800 mm, total height: 2,250 mm, -WR 177- Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3615/673 Year of Manufacture: 1988 Weight: 350kg Overhaul: 04/2025 by Wiemers AG General / Technical Data: Unused, partially overhauled, mechanical vertical broaching machine Rausch RS 3 without CE marking Pulling force: 3,000kg Broaching speeds: 3m/min Return speed: 3m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / work area: 430mm x 320mm / 340mm x 220mm Table through-hole: Ø 90mm for standard broaching mandrels "System Rausch" Workpiece diameter: any (with the cabin removed) Broaching capacity / keyway width: up to 18mm in steel (from 16mm keyway width only with offset tool shank) Dimensions (h x w x d): 2,250mm x 800mm x 750mm (h = including 3-sided protective cabin) Motor: 3.0kw / Power supply: 400V / 50 Hz Equipment: - Protective door with safety monitoring (emergency stop circuit) - Chip chute - Externally adjustable tool length adjustment system (System Rausch) - Protective cover for stroke adjustment and electrical switching units - Electrical sensing of the clamping jaws (System Rausch) (Tool removal control to prevent unintentional retraction of the drawbar, providing additional safety for the operator & tool) - Integrated coolant system - 4-sided enclosed splash guard hood with protective door - Extra reinforced chip basket and chip sieve with magnet insert - Control panel external - 2 grease points for the trapezoidal spindle drive with manual grease gun directly on the spindle nut Note: Chjdpfxoz Hl U Ie Abrjd The machine has been partially overhauled by Rausch. The following wear parts have been replaced and renewed. - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals are new - New electrical system - 4-sided enclosed splash guard hood with protective door at the front - New protective door instead of the light barrier in the machine room - New clamping jaws - All sheet metal parts, such as covers, chip chute, basket, sieve and spindle protection, are new. - External control panel General The double spindle drive ensures a smooth and central pulling point as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 18mm. (from 16mm keyway tools only with offset tool shanks) Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. Due to the structurally universal design of the drawbar and the machine table, broaching with profile and flat broaching tools is possible without the use of additional draw heads.

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data Chjdpfx Ajzzyd Ajbred * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Chedpfxoxtcz Io Abrsd Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.