Keyway nudging machine

Elmass ELM-P1 / 200-A

Year of construction: 1995, condition: used, machine/vehicle number: 18891, Force: 10 to. Stroke: 1000mm 3 Broaching-stations Gbodjbrcmkepfx Ag Hok With chip-conveyor + platform and safety door

Condition: good (used), Year of construction: 1971, machine/vehicle number: 170119003210A0, Offer 25217 Technical data: - Groove width: 3 to 36 mm - Max. groove length: 340 mm - Bore diameter: 10 to 350 mm - Feed rate: 0.01 - 0.22 mm - Cutting speed: 2 - 10 m/min - Return speed: 20 m/min - Max. pulling force: 1.5 t - Max. workpiece weight: 3 t - Table size: 350 x 450 mm - Working / operating height: 1050 mm - Drive: 400 V / 3 kW Gbedpfjwu Suvex Ag Hjk - Space requirement: approx. W 900 x H 1250 x D 700 mm - Weight: approx. 900 kg - Extensive accessories as shown

Condition: new, Year of construction: 2025, saw band length: 4,420 mm, saw band width: 34 mm, Double-column bandsaw, fully automatic Everising H-360 HB Cutting range round: 0 - 360mm Cutting range square: 360 x 360mm Bundle tension: Width: 180 - 280mm Bundle tension height: 50 - 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2310 KG Machine dimension 2500 x 2200mm Gedpfx Ageq St U Ns Hobk The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw blade tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic band breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: excellent (used), Year of construction: 2012, Technical Data: Gbjdpfox Ii Hvex Ag Hok Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2014, sheet width 2600 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 220 mm side roll diameter ~ 170 mm diameter of lower rolls ~ 190 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight ca. 5000 kg Dimensions (only the machine) ca. 3500 x 1550 x 1400 mm very good condition (!!) Gedpfx Ageylpz He Hebk current new price incl. accessories approx. 120.000 Euro special price on request Equipment: - robust electro-hydraulic 4-roll round bending machine - 4-roll concept offers a wide range of bending and rounding options - Swivel-mounted control unit * Operation - control of all rollers or machine axes * Digital position display of the side rollers * Manual operation via JOY sticks - Two central rollers are driven directly via hydraulic motors - Conical rolling possible by tilting the rollers - Parallelism of the side rollers via torsion shafts - Bending on both sides - diameters of up to 1.1 times the top roller diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - Safety device (safety line with switch unit) - operating instructions * Special accessories included : - ROCCI height-adjustable center support * for large pipe diameters - ROCCI electro-motorized material feed table * motorized sheet feeding material support surface

Condition: excellent (used), Stud welder Make TRW. Nelson Gbodpfx Agevcl T Aj Hsk Type Alpha 850 YEAR OF MANUFACTURE 1995 maximum welding capacity studs up to 12 mm welding current continuously adjustable from 100 - 850 A supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm height 380 mm

Condition: new, Year of construction: 2025, saw blade diameter: 480 mm, High-performance Everising fully automatic circular saw (NEW) incl. magazine. For the use of thin-cutting circular saw blades (carbide / cermet) Basic data: - Application range: 70-160mm round - Drive: 15 kW - Blade dimensions: 480 x 2.7 x 2.25 - Saw blade speed: 30 - 125 rpm - Weight: 5 tons - Dimension: 3100 x 7530mm (incl. magazine) Features: - Automatic loading magazine 6 meters (for round material 6 meters) - Emulsion cooling option - Siemens control system - Electromagnetic brake system - Direct-driven saw spindle for very high cutting performance - Ball screw spindle incl. servomotors for precise feed - Heavy-duty design - Minimum quantity lubrication - Inverter-controlled stepless cutting speed - Fully encapsulated, low-noise - Automatic cut and remnant sorting - etc. Other models available: P-50 ILA: Cutting range 8-50mm P-75 ILA: Cutting range 10-75mm P-100 ILA: Cutting range 15-100mm P-150 ILA: Cutting range 70-150mm Gsdpfx Aeq Ul Rkjg Hebk P-160 ILA: Cutting range 70-160mm P-180 ILA: Cutting range 70-180mm P-230 ILA: Cutting range 70-230mm

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Gedpfxex Iitie Ag Hobk Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: good (used), Keyway broaching machine RAUSCH RS 6-1300 with extensive accessories - Ram stroke / Maximum stroke length: 1300 mm - Pulling force: 6000 kg - Operating voltage: 380 Volt - Including 38 x broaching needles - Including 95 x guide bushings - Spacer shims - Crane - Workbench - Platform - 2 x tool cabinets Gedpfjx A Edqsx Ag Hobk Dimensions: LxWxH 1.6x1.7x2.3 meters / Weight: 2000 kg Errors and omissions excepted

Condition: used, Year of construction: 2002, weight max. 10 / 20 (einzeln / Satz) t workpiece diameter Ø250 - Ø4600 mm gear diameter 380 mm turning speed drive gear steples 130 - 1300 mm/min total power requirement 2x 0,75 kW Gbodpowg Hprefx Ag Hsk weight of the machine ca. 750 kg / 500 kg Steel rollers, dia. 380 mm Idle rollers with motor driven displacement of rollers Continously variable speed of drive rolls