Used Laminator for sale (842)

Condition: like new (used), Year of construction: 2016, operating hours: 210 h, functionality: fully functional, working width: 1,800 mm, type of cooling: water, This Reliant Powerbond HPC, 1800 mm width High Pressure Laminatint Line contain the following unites: - Unit 1 Reliant Powerline non driven unwind unit - Unit 1A Lightweight table designed to support sheets during feeding - Unit 2 Reliant Powerline Powder Coating unit - Unit 3 Reliant Powerline 3000 mm PTFE Conveyor - Unit 4 Reliant Infrared Pre-Heating System - Unit 4A Unwind shaft roll support for surface friction or centre unwinding - Unit 5 Reliant Powerbond-HPC-180 Haevy Duty, High Pressure Laminating Machine - Unit 5A Laminating Line Control Unit - Unit 6 Reliant Powerline Centre Driven Rewind System - Unit 7 Reliant Chiller Unit-I416 Kledsv Tmxnjpfx Addol More details about the units can be found in the attached pdf file. Loading of the machine on the transport vehicle is included in the price. The transportation of the machine should be provided by the buyer.

Condition: excellent (used), Brand new / Showroom machine Automatic roll-fed encapsulation laminator with auto-feed, lamination, and cutting in one process Technical Specifications: Max. Laminating Width: 11" (279 mm) Laminating Speed: 39 inches per minute (approx. 99 cm/min) Maximum Output: Up to 240 sheets per hour Kljdpfjwrpd Njx Addol Film Thickness Range: 1.5 to 5 mil Feeder Capacity: Up to 200 sheets Power Requirements: 110 V Controller: Digital panel Dimensions (W × L × H): 24" × 19" × 18" (approx. 610 × 483 × 457 mm) Cooling System: Included Stand: Optional Sleep Mode: Activates after 10 minutes Key Features: Compact design fits office or school environments One-button start; stops automatically when job is complete Up to 3x faster than pouch laminators Easy top access for quick cassette changes Integrated internal rotary cutter for safety Digital panel for setting margins and sheet count Film cassette lifts out for easy replacement Ideal for schools, offices, and print shops

Condition: ready for operation (used), Year of construction: 2012, input voltage: 380 V, Description about the machine: 2-sided, sheet fed, thin film, thermal laminator for short runs Max sheet size: 53 x 75 cm Min sheet size: 32 x 22.5 cm Max speed: 25 m/min 135 gsm to 450 gsm Quick make-ready Easy operation Small footprint Heavy-duty build quality Feeder Heidelberg-Stahl suction drum Bottom separation, continuous run, top loading Air inflates the sheets from the sides, allowing them to float on a bed of air Operator replenishes sheets on the run, thus providing continuous feed Laminator Electrically heated laminating roller Digital temperature controls up to 120°C (248°F) Rubber counter-pressure roller Choice of manually adjustable hand-cams or pneumatics for nip pressure Film mounted on a quick-change bar Film roll perforating mechanism Klsdpfjwrxqlsx Addel Sheeter Integral steer & pull separator runs in-line Features include in-feed hold rollers, adjustable anti-curl bar, and variable speed belts Delivery into vibrating jogger table with under-sheet adjustable air control Perfector Sheets are laminated top and bottom in one pass Rubber counter-pressure roller becomes electrically heated Additional heated roller, quick-change bar, and perforating mechanism for 2nd roll of film

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, total length: 2,700 mm, total width: 1,200 mm, working width: 530 mm, Industrial machine lamination for offset and digital, simultaneous front & back laminating. The machine is equipment with Heidelberg vacuum feed. New equipment ! Equipment has not been used for work but only for initial testing/installation. Laminating machine to be perfectly adapted for both offset printing and digital printing with dry toner. Maximum speed: 25 m/min (working speed is variable depending on several factors: paper/cardboard substrate, the type and quality of the laminating foil and the type of printing (offset, ink, laser or digital). It can laminate one side or both sides in one pass, working speed up to 25 m/min can be achieved even in double-sided mode. - Maximum average size 53 X 100 cm; - minimum dimensions width 30 cm X length 20 cm; - average thickness between 115 gsm and 600 gsm; Full option equipment: - automatically overlaps and separates plasticised sheets, - allows adjustment of pneumatic pressure between the rolls and can work in heavy duty mode in case of large runs such as packaging. - can laminate even plastic window packaging with non-adhesive rollers (2 non-adhesive rollers); - the way to apply metal foil and achieve selective lacquer effect; - adjustable hydraulic pressure; - Hilderberg vacuum feed from 54 cm high stack and automatic lift and 6 bar 130 l/min external compressor; - jogger for receiving laminated sheets, with 10 cm stack; - equipped with 2 pneumatic axles for fixing the laminating roll; - equipped with 2 pairs of press rollers for front/back lamination; - accepts 3000 m rolls, foil between 24 and 31 microns; - BOPP film accepted between 23 and 42 microns, Nylon maximum 35 microns, PET maximum 35 microns (regardless of film producer); - longitudinal slitting knife; - longitudinal perforating knife; Floor area 120 x 270 cm Power supply: 3-phase, 400V AC, 50-60 Hz Power consumption: 7,500 W The machine is equipped with the following options: 2 non-stick cylinders 2 pneumatic axles for fixing the rolling roll 2 pairs of press rolls for double-sided lamination FOILER - unit for foiling and laminating with UV selective varnishing effect Jogger for receiving laminated sheets Kljdpfx Aemcw T Tsddel Large format module (max.53x100cm) Negociable price EXW - old price 49.000 - new price 30.000 euro + VAT (without VAT in EU).

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, working width: 1,420 mm, Year: 1986 Kedpfxexcy Hyj Addjll Width/mm: 1420 Thickness/µm: 14-400 Material: PO, PE, paper, HDPE, LDPE Detail: Plant consists of: 2x Fife edge trim control 2x Ahlbrand MFD 2000 pre-treatment units (year 2001) 1x Print Concept UV unit type PC 2w-1600-2x1 (year 2001) Coating unit with individually temperature-controlled rollers. Sleeve system D: 76mm. Several spare parts included.

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Kjdpfx Adoxdimfsdjll Installed power: 97 kW Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NON, travel distance X-axis: 13,000 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,300 mm, Product name: MHL13000 Single-Sided Vertical Squaring Machine Maximum processing length: 13,000 mm Maximum processing width: 1,300 mm Maximum processing thickness: 230 mm Rated pressure of the hydraulic system: 16 MPa Main pressure cylinder (cylinder diameter x stroke): φ100 x 100; 34 units in total Side pressure cylinder (cylinder diameter x stroke): φ50 x 150; 34 units in total Side lift cylinder (cylinder diameter x stroke): φ63 x 400; 8 units in total Side pressure plate type: Single presser foot Hydraulic motor power: 5.5 kW Hydraulic system: Manual push-button control with pressure holding and automatic pressure compensation Dimensions: 13,300 x 1,300 x 2,300 mm Net weight: Approx. 15 t Klsdpfjxgb Iaox Addsl 1. Relief valve and electromagnetic directional valve: Zhenping Hydraulics 2. Oil pump and motor: Shanghai Volkswagen + Guangdong Juntai 3. Hydraulic cylinders and high-pressure oil lines: Zhengtian, hand-made, with stable quality and high durability 4. Cylinder seals: Taiwan Dingji (high-performance seals)

Condition: ready for operation (used), D&K System Jr. Year 2006 Format max 68x76 cm Format min 20x28cm Kledpfswhcfxjx Addjl Till 500 gsm can work Single Sided Thermal Film Laminator Accufeed Jr. Automatic Sheet Feeder, Acculam Jr. Laminator, Accu-III Jr. Automatic Sheet Separator, Jogger Catch Tray Delivery

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Kodpfx Adow Tyk Iodjll

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, LAMINA 1116 FAS+ Klodpfx Adewc Trfodel Machine in production, can be inspected in Bucharest, Romania. Model/ Width/ Length/ Width/ Length/ Weight 1116 FL+/ 1100 mm (43”)/ 1600 mm (63”)/ 2150 mm (85”)/ 6800 mm (267”)/ 2500 kg (5510 lbs).

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Kljdpox A Tbwsfx Addel Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Klodpfx Adswuzzredel Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Kodewu Agcjpfx Addoll Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700

Condition: used, This listing is for the CAS Laminar Flow C2001 The unit is in full working condition and is ready for immediate use Klsdpsxhd Npofx Addol Contained Air Solutions (CAS) is a UK-based specialist in clean air and containment equipment, offering high-quality, customisable laminar flow cabinets designed to meet Grade A (ISO Class 5) GMP standards

Year of construction: 1997, condition: used, Manufacturer: Telstar Model: LPP1600 Year : 1997 (never used)   Material :Polished stainless steel Power : 2500 w 1 vertical box 1 horizontal box Flux placed across the width of the other box Control panel on 1 side 3 sides with straps 3 neon lights laminar flow surface 200 x 150 cm Height: 200 cm Overall dimensions 250 x 150 x 250 cm Kjdpfx Adex R Awgjdjll   Feet or suspension mounting required

Condition: new, Year of construction: 2026, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters. Kjdpfodwqiusx Addell

Condition: good (used), functionality: fully functional, Year of construction: 2008, Delamination testing plant for laminated wood Kedpfx Aex S E S Asddell

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 11123292, input voltage: 400 V, total length: 3,555 mm, total width: 1,350 mm, total height: 2,600 mm, compressed air connection: 6 bar, type of input current: three-phase, overall weight: 999 kg, input current: 16 A, Equipment: documentation/manual, A Bochonow automatic screen developing system from 2012 is for sale. --- Bochonow automatic screen development system in 2012 Model S material stainless steel screen size 1400mm x 2400mm depth: 1350mm width: 3555mm height 2600mm Transportation, assembly, at your expense Please do not hesitate to contact us if you have any questions and concerns more pictures and a short video! Kedpfxjv Ikfhj Addsll best regards Markus

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Sanken Lasin laminointi kone Eva kalvolle , Prosessi esim Pujolin kalvolle Ksdpfx Aev Idb Nsddsll Mitat 4100 x 2200 x 2250 paino 3350 , 4 petiä , petien koko 3200 x 1700

Year of construction: 2019, condition: like new (used), Thermoformer Designed for pharmaceutical environments, it can thermoform trays for vials, ampoules, syringes, and medical devices in general, using thermoformable films such as PVC, PET, R-PET, Polystyrene (PS), PP, PLA, etc. Possibility to cold-form Aluminium based materials. Main Features: Balcony structure for easy access and cleaning High-speed positive automatic product feeding systems Available with or without a sealing station Arrangeble for in-line connection Kljdpfx Adoybcwtsdsl Quick, repeatable, and tool-free format change Thanks to the servo-assisted main transmission, the machine speed is adjustable from the main HMI within dedicated recipes Automated thermoformer machine. Forming material reel unwinding - preheating - forming - filling with laminated strips (robot) - applying and sealing tyvek lid - cooling - serialised printing - indexing - punching - feed sealed strips out to box packaging machine.

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Application Types Pressing / Laminating Kljdpfx Adjx D Nglodel

Condition: used, Year of construction: 2018, Striebig Compact Wall Saw – 2018 Model – Excellent Condition A rare opportunity to purchase a Striebig Compact Wall Saw, built in 2018 and meticulously maintained. Known for Swiss precision and robust build quality, this machine is perfect for accurate vertical and horizontal panel cutting in tight workshop spaces. Key Details: Klodex Dh T Dspfx Addjl Make/Model: Striebig Compact Year: 2018 Condition: Excellent – clean, reliable, and serviced Cutting Capacity: Ideal for full-sized sheet materials (MDF, plywood, laminates, etc.) Usage: Light-to-moderate – not heavily used Location: N18 Availability: Ready for collection from North London Features: Smooth, accurate vertical and horizontal cuts Space-saving design – ideal for smaller workshops Heavy-duty frame and guide rails Dust extraction port compatible Striebig is the gold standard in vertical panel saws, offering durability, safety, and unmatched precision.

Condition: ready for operation (used), Year of construction: 2018, controller manufacturer: SIEMENS, controller model: SIVATIC HMI, This WEMHÖNER Variopress Basic 1000S was manufactured in 2018. Ideal for efficient laminating processes, this machine ensures consistent performance. Consider the opportunity to buy this WEMHÖNER Variopress Basic 1000S laminating press. Contact us for more information. Kodpfx Adox D Hy Aedsll Additional equipment • Including: 2 x paternoster magazines for film rolls Machine Benefits Technical Machine Benefits • Heating plate format (mm): 2850 x 1550 • Electric heating plate design: aluminum heating plate top • Total pressing force (kn): 2400 / chamber pressure max (bar): 6 / operating temperature max: 180 degrees celsius / batch or workpiece size max (mm): approx. 2460 x 1180 • Thermoplastic film in rolls, width of the film: approx. 1430 mm / thickness of the film (mm): approx. pressure chamber height (mm): max. Up to 180 • Connection values: installed power (kw): approx. 46 / required air pressure (bar): approx. 8

Condition: ready for operation (used), Year of construction: 2015, cutting length (max.): 4,200 mm, total height: 1,980 mm, overall weight: 780 kg, product length (max.): 5,580 mm, This PUTSCH MENICONI SVP 145 panel saw was manufactured in 2015. It features a vertical cutting design with a maximum cutting capacity of 4200 mm in length and 2200 mm in height. The saw supports a maximum panel weight of 180 kg and operates with a blade diameter of 250 mm. Ideal for materials like MDF, plywood, and laminated panels. Contact us for more information about this machine. • Electrical data: • Nominal voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Full load current: approx. 8.4 A • Maximum load current: approx. 7.6 A • Protection level: IP54 • Cutting capacity: • Maximum panel length: 4,200 mm Kedeyazq Aopfx Addjll • Maximum panel height: 2,200 mm • Cutting thickness: 8–60 mm • Maximum vertical cut height: 2,200 mm; minimum: 250 mm • Maximum horizontal cut length: 4,200 mm; minimum: 500 mm • Maximum supported panel weight (aluminium table): 180 kg • Saw blade specifications: • Blade diameter: 250 mm (minimum 240 mm) • Bore diameter: 30 mm • Kerf width: 3.2 mm • Blade type: HM / HW blades (without insert cutting tips) • Dust extraction (ECO version): • Extractor nozzle diameter: 100 mm • Minimum air speed: 20 m/s • Minimum air flow: 570 m³/h • Pressure drop: approx. 700 Pa • Noise levels: • Sound power level (without load): 89.0 dB(A) • Sound power level (with load): 93.0 dB(A) • Sound pressure level at workplace (with load): 84.5 dB(A) • Materials: • Particleboard (raw & laminated) • MDF • Plywood • Decorative laminated panels

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Klodeyaqmgepfx Addol • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.