Used Lathe Chuck Jaws for sale (8,292)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/125/H75 mm -Total weight: 5.9 kg Fsdsy R Sm Rspfx Aanepp

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fedpfjy R R Ndsx Aanepp -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H56 mm -Total weight: 2.0 kg

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Fedpfx Aoib D H Rsanspp Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Overall dimensions: 110/105/H67 mm -Total weight: 5.4 kg/set Fedozfgh Nepfx Aanspp

Condition: new, Year of construction: 2026, The CORMAK WP400 self-centring 3-jaw pipe chuck is a high-quality accessory designed for use with welding positioners and welding rotators. It enables quick and stable clamping of cylindrical or hexagonal workpieces with diameters ranging from 120 to 380 mm. Thanks to its robust design and high clamping force, the chuck ensures reliability and precision essential for automatic and semi-automatic circumferential welding processes. Main advantages of the WP400 chuck Wide clamping range – allows clamping of workpieces with diameters from 120 to 380 mm, ensuring versatility for both series and single-piece production. Self-centring 3-jaw mechanism – guarantees fast and accurate alignment of the workpiece along the rotator axis. High clamping force – 350 kg – enables safe clamping of heavy components during dynamic rotation. Compatible with welding positioners – perfectly matches welding rotators and other welding support equipment, allowing full utilisation of their capabilities. Stable and durable design – engineered for long-term use in demanding industrial conditions. Design and technology The WP400 model features a precise, mechanically synchronised clamping system that ensures the workpiece is always perfectly centred on the rotational axis. The three independently moving jaws are made of hardened steel, resistant to wear and deformation. A large through-hole of ⌀170 mm allows for the passage of tubular workpieces, while the load capacity of 240 kg provides safe handling of heavy components. Precision and performance The WP400 chuck minimises setup time, increasing overall workstation efficiency. The self-centring system eliminates positioning errors and improves the quality of circumferential welds. Its rigid construction ensures stability during automatic or semi-automatic welding cycles, even under high loads. Applications The WP400 chuck is designed for industrial facilities using welding positioners, welding rotators, and other devices supporting welding processes. It is ideal for clamping pipes, sleeves, flanges, and other components requiring rotational welding. With its high clamping force and load capacity, the WP400 is suitable for both light and heavy-duty production environments. Technical parameters Model WP-400 Max clamping force 350 kg Fjdpfx Aaoycqpyenepp Max load capacity 240 kg Through-hole diameter ⌀ 170 mm Clamping range ⌀ 120–380 mm

Condition: new, Year of construction: 2026, The WP300 self-centering three-jaw chuck is a specialist accessory designed for clamping pipes and workpieces with cylindrical or hexagonal cross-sections in welding positioners and welding rotators. Thanks to its precise self-centering clamping mechanism, it ensures secure and accurate positioning of the workpiece during rotation, which results in higher quality and repeatability of the welding process. Key advantages of the WP300 chuck Precise self-centering mechanism – enables quick and accurate centering of pipes and workpieces, eliminating the need for manual positioning. High versatility – compatible with many welding rotators and positioners, including models PS310, PS320, and PS360. Stable clamping – thanks to three independent jaws, the workpiece remains securely clamped even at high rotational speeds. Robust construction – made of high-grade materials resistant to vibration, loads, and harsh welding environments. Optimal working diameter – the ability to clamp pipes up to 270 mm in diameter allows for a wide range of applications. Design and technology The WP300 model features a compact and durable steel construction designed for intensive operation. The three-jaw mechanism operates synchronously, automatically positioning the workpiece on the axis of rotation. The large outer diameter (300 mm) and the through bore (100 mm) allow for handling a wide range of workpiece dimensions. The mounting holes are designed to ensure full compatibility with CORMAK welding positioners. Precision and efficiency The WP300 chuck provides high clamping repeatability, which translates into precise circumferential welds. It shortens workpiece preparation time and reduces setup errors, increasing production efficiency and improving operator safety. The solid construction ensures stable operation even under dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, particularly in manufacturing plants, metalworking workshops, and companies involved in steel structure prefabrication. It is used with welding rotators and welding positioners, enhancing their functionality and versatility. Technical data Max. pipe diameter: 270 mm Outer diameter: 300 mm Inner diameter (through bore): 100 mm Fpodpfeycqptsx Aanjp Mounting hole spacing: 105 mm Bolt hole diameter: 9 mm For welding positioners: PS310, PS320, PS360 Weight: 14 kg

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Manufacturer: Forkardt Model: F 250 Threaded spindle: 105 x 6 mm Cylinder diameter: 105 mm Outer diameter: 250 mm Fpsdpfsfb T Dbox Aanop Inner diameter: 63 mm Chuck height including flange: 180 mm Age is estimated.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Fodpfxju Npfge Aanspp -Top jaws: 4-piece rotary jaw set, 3 sets -Jaw width: 34 mm -Dimensions: see photo technical drawing -Price/Sale: only complete -Total dimensions: 410/130/H80 mm -Total weight: 21.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set Fpedpfxoy R R I Tj Aanjp -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 85/90/H57 mm -Total weight: 2.1 kg

Condition: good (used), outer diameter: 315 mm boring: 105 mm Fsdpfx Asckpnfeanepp

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing Fpodpfx Aajw Dp Thsnsp -Dimensions total: 130/136/H80 mm -Total weight: 7.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for four-jaw chuck, 8 sets -Jaw width: 18 mm Fedpfozpwuhex Aanepp -Dimensions: see photo technical drawing -Submission/Price: complete -Dimensions/Set: 60/72/H47 mm -Total weight: 1.4 kg/set

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW weight of the machine ca.: 17,0 t Fjdpfxou Idvke Aanopp TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. *

Condition: used, Technical details: number of spindles: 9 Stück weight of the machine ca.: 10,2 t Fpsdpou Idwnjfx Aanep Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 83,0 kW weight of the machine ca.: 17,0 t space requirement of the machine approx.: LxBxH: 5,0 x 6,2 x 3,8 m dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxB.H: 650x600x2300 mm Fpjdeu Idxropfx Aanop dimensions electric cabinet: Nr.4: LxBxH: 1300x650x2350 mm TRANSFER MACHINE with 3 work station and 15 drill & mill spindles - for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, clock cycle of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 4x drill-& mill spindle with 18 stages and 1x thread cutting spindle hydr. 14 up to 224 U/min, left 4x drill and mill spindle with 18 stages and 1x thread cutting spindle hydr. from 14 up to 224 U/min such as radial 3x drill -and mill spindle from that 1x U-Axis and 1x thread cutting spindle 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left Fedsu Idxfepfx Aanspp - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 1999, Technical details: number of spindles: 6 Article: cam-controlled multi-spindle automatic lathe Fpedpfxjw Hb Tro Aanep Manufacturer: Schütte Type: SG18 Yob: 1999 six-spindle automatic lathe 6 main spindles as a chucker automatic lathe control Siemens S7-200 PLC loading and disloading in position 6 spindle brake Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Three-jaw chuck, 3-jaw chuck -Chuck size: Ø 310 mm -Passage: Ø 110 mm Fpodpfx Aod Irayjanep -Bayonet: short cone flange cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm -Weight: 47.2kg

Condition: used, Year of construction: 1990, Technical details: number of spindles: 8 Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AFH130 with CNC Yob: 1990 eight-spindle automatic lathe 8 main spindles Fpodpfezubyrox Aanop Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter delivered tooling: could be different like pictures option: Ergomat TBF42 for cutting off for half finnishing with FMB-Turbo Visiting under production condition is possible Please, contact us for getting more information and pictures on mail(at) or *

Condition: excellent (used), SCHUNK SVP-2 201760 TRIBOS S clamping device SRE reducing inserts Z7 (10 pieces) Fpodpfx Aaszhrfxenop In very good condition.

Condition: used, Year of construction: 2005, Hydraulic 3-jaw power chuck, manufacturer: FORKARDT, type: 3KS630, year of manufacture approx. 2005. Diameter: 630 mm. Draw rod thread: M30. Includes 1 pair of hardened jaws. Fmax 13000 daN. Fpsdpfochfr Nex Aanep Max. speed: 1200 rpm. In good condition.

Condition: used, functionality: unexamined, Ferwood code: RU0011648 - Manufacturer code: K6343K0950 - Condition: Used - Functionality: Not tested - If interested, we offer overhaul service, please contact us. Fpodpfx Aowtnmloansp

Condition: good (used), Two-jaw chuck, 2-jaw chuck, vise, faceplate -exciting: centric -Mouth size: Ø 200 mm -Weight: 19 kg Fpjdpfsb A R Hvjx Aanep

Year of construction: 2011, condition: excellent (used), Lathe chuck Fpjdod Na Spopfx Aanop Diameter 330 mm Height 100 mm Weight 57 kg Year of manufacture is estimated.

Condition: good (used), Year of construction: 2012, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, 3500rpm, 22kW Spindle, Fjdpfx Aaj Aggfbonepp Fanuc i, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor,parts catcher, Coolant.