Used Letterpress Machine for sale (64,034)

Condition: used, Year of construction: 2016, functionality: fully functional, Heidelberg SBG | 56x77cm Cjdpsyzgl Aefx Ac Njgt ・Fully Refurbished 2016 ・2 Foil Rewind ・4 Zone Heated Aluminium Drop-In Plate ・Automatic Impression ・Touchpad Control System ・Excellent Used Machine LOCATED IN THE UK

Condition: excellent (used), FDI manual punch press, Fredrich GmbH . Very good condition. Cedpfx Aoum H Edec Negt

Condition: ready for operation (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this ready-to-use Heidelberg printing press, model SBB 570mm x 820mm 22 ½" x 32", year of manufacture: unknown. Heidelberg cylinder with hot foil stamping and die cutting attachment Heidelberg SBB 570mm x 820mm 22 ½" x 32 ¼" Aluminum heating plate from 2019 divided into 3 heating sections Temperature control: up to 200° C 2 independent foil feed tracks Cgodpfx Ajy Izl Djc Not Option of foil feed in cyclic mode Single foil unwinder Power supply: 230 V / 400 V AC 50 HZ Total power consumption: 4.7 kW Heating plate power: 4.5 kW The removable heating plate allows the machine to be converted from gilding to die cutting Maximum mechanical paper handling speed: 2,500/hour Maximum sheet size: 570 x 820 mm For questions or further information, please send a message or contact us by phone.

Condition: good (used), machine/vehicle number: 33829, Manufacturer: Heidelberg Model: OHZ / SBB Cylinder Press Machine type: Automatic cylinder letterpress / die-cutting press Csdpfxeyr Tcuj Ac Njgt Working size: 57 × 82 cm (22½″ × 32¼″) Status: available Condition: used Available from: immediately

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, Heidelberg Tiegel A4 Year of manufacture: approx. 1970 Grey model Immediately available Cjdpfxeycwk Do Ac Nsgt

Condition: ready for operation (used), Hot Foil system SM SYSTEM -France 6 heating zones Honeycomb Size 57x77 cm Cgodpfjyx Icdex Ac Njt

Condition: good (used), Heidelberg OHT „windmill” Letterpress Cgedpfx Aowxtb Sjc Njt Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: good (used), Emil Kahle Letterpress Machine Platen Manufactured in Germany by Emil Kahle Maschinenfabrik, Leipzig Reudnitz A brilliant-looking exhibit to place in a company lobby. Cedpfx Aevac S Rsc Njgt Manually added piston. Foot pedal controlled. Frame with mounted form included. Frame size approx. 365×255 mm.

Condition: good (used), Proofing press 55x65cm Antique The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Csdpsu Umaijfx Ac Nogt Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Condition: good (used), Adast Grafopress GPE letterpress machine Cgjdjv E A U Nopfx Ac Njt Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. The equipment includes printing rollers. The device is used for die cutting, printing, creasing, numbering, etc.

Condition: good (used), Columbian Press 1858 Letterpress Cgjdpjvbb Slefx Ac Nst Manufactured in Great Britain by Henry Watts Year of manufacture 1858. Can be used as a work machine or as a museum exhibit.

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Impression count: 319,874 cycles. Min. format: 100 mm Max. format: 300 mm Printing on self-adhesive paper (40-220 g/m²) 4 IR lamps Hot stamping section. Exposure and developing device. Codpfx Aeyb Sznsc Njgt Inspection possible. Documentation available. Disassembly is possible.

Year of construction: 2000, condition: good (used), KOPACK 250 SUPER 6-colour letterpress press with flexo varnishing unit, full UV configuration, flat-bed and rotary die-cutting. This machine is engineered for high-quality self-adhesive label production and provides a compact, efficient setup including UV printing, die-cutting, and web handling. Below you will find the complete technical specification and commercial terms. Testing and inspection at the installation site can be arranged upon request. Technical Specification General Information Manufacturer: KOPACK Model: 250 SUPER Printing technology: 6 × letterpress printing units 1 × flexo varnish/coating unit Applications: Labels, self-adhesive materials, paper and film substrates Web & Format Maximum web width: 250 mm Rewind/unwind diameter: up to 800 mm (CI drum) Core diameter: 76 mm (3”) Material types: paper, self-adhesive laminate, film substrates Printing method: Complete UV curing system Register: Mechanically driven register system with gears Drying & Surface Treatment UV system: Full UV configuration Corona treater: Sherman Corona Treater installed (for improved ink and varnish adhesion on films) Csdpfox Ez Tvex Ac Nsgt Web Handling Web guiding system: BST Web Guide Material transport with edge guiding and tension control Manual splicing table Printing & Finishing Units 6 × letterpress colour stations 1 × flexo varnish/coating unit Flat-bed die-cutting station Rotary die-cutting unit Integrated waste matrix removal and rewinding Electrical / Controls Central control panel Emergency stop system UV safety interlock protection Electrical documentation available (where present) Included Accessories Standard plate cylinders Die-cutting frames/rotary tools (as available) UV lamps with power supply units Web guide sensors and display panels

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: Cgodpfx Ajy Ni Ivjc Nst W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cgodpfx Aeyzf Nasc Njt Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Cgjdpexxb Rrsfx Ac Njt Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Cgjdpsya H Nkjfx Ac Nst Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 Cgedpfx Aeyaywhec Not £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Cjdpfox D Tbmsx Ac Negt Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, XYZ Proturn SLX425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2011 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication Cedpjw Hb T Sjfx Ac Nogt *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78937 Machine Serial Number: L507 Cost: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2005, XYZ Proturn VL425 ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK VL Control (Reconditioned 2025) Max’ Distance Between Centres 1250mm Max Swing over Bed 400mm Max’ Swing over Gap 700mm Spindle Bore 80mm Spindle Speeds 25 – 2500 rev/min Spindle Motor 10hp / 7.5Kw Quick Change Tool Post Tailstock MT5 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2005 We can offer delivery & installation, operater training and warranties. Supplied with: 3 Jaw Chuck Tooling as photographed Machine Handbooks 3 Toolholders (More available if required). Tracking Coolant Worklight Auto Lubrication *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #78938 Machine Serial Number: L247 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Cgodpfsxt Ibysx Ac Nst Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm Cedpfx Aey Du N Uoc Negt TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO. Csdpfxoy Nd Sis Ac Nogt

Condition: reconditioned (used), Kalmijer Cookie machine if you have further questions please send an message Cgjdpskzi Uljfx Ac Nst

Condition: new, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, 📝 Description & Additional Technical Parameters Product Description: The VTX-5 is part of the Tongtai VTX Series of compact CNC vertical tapping / milling centers. It is designed to combine high speed, rigidity, and precision in a relatively small footprint. It uses a direct-drive spindle to improve tapping accuracy and reduce maintenance compared to belt-driven designs. Roller guideways (linear rails) are used to ensure smooth, rigid motion. Tool changing is relatively fast, and the structure is optimized for stability and precision under moderate loads. Technical Parameters: Table size: 600x400mm Strokes on X/Y/Z: 510/400/300mm Maxim loading capacity on the table: 250kgs Rapid traverse on X/Y/Z: 60/60/60 m/min Machine size (Width x Depth x Height): 1.700x2.600x2.700mm Machine weight: 2.850kgs Siemens controller model 828D with Shopmill and 10,4inch LCD Spindle speed 12.000 rpm direct driven Spindle motor 5,8kW Tool shank BBT-30 4th axis rotary table diameter 170mm and tailstock CTS ( coolant through spindle) 20bar Chip Conveyor chain type Price is EXW (Stock Europe), Include loaded on truck. Codpexni Iqofx Ac Njgt Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.