Used Trumpf Tc 500 R for sale (358)

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual Hfodpfx Aqsz Rl T Tepjn + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control Hsdpfx Aoz Ii A Sjqpsfn TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Max. plate dimension ... 1250 x 2500 mm Max. plate width ... 6 mm X axe max. ... 3085 mm Y axe max. ... 1650 mm Max. force ... 220 kN Hsdpfez I Sq Ssx Aqpofn 3200 W Machine dimensions ... 6100 x 6760 x 2230 mm Machine weight ... 14565 kg

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Hfjdpfx Aohtfp Toqpjn Additional extras with the machine: Cabinet full of tooling Multitool Multiset – tool setter Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Condition: good (used), Year of construction: 2014, functionality: fully functional, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Workpiece weight: 200 kg Punching force max.: 220 kN Total power requirement: 9.5 kW Space requirement approx.: 7395 x 6540 x 2072 mm Equipment: Punch head: - Hydraulic single-tool chuck with 360° rotation - Manually adjustable clamping force - Programmable clamp (active/passive/re-positioning) - Spray lubrication for punch - Stroke counter for punch - Level monitoring for threading and tool lubrication Control system: - Open control system based on Sinumerik 840 D - 12" TFT color display - Teleservice via internet - Automatic shutdown Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Dual light curtains - Rapid shutdown of hydraulics - Bulge detection Programming: - TruTops Punch via network access 1 x MultiTool function 1 x MultiShear function 1 x Thread forming function 1 x Deburring and rolling technology 1 x SoftPunch function 4 x individually openable clamping jaws 4 x height-adjustable clamping jaws Hfjdpsy Sak Tsfx Aqpen 1 x Re-positioning cylinder 1 x Sensor for stripper (included in rest material-free processing) - GripMaster - Rest material grippers with sensor technology - Shear lift table 400 mm - Tilting rest material pallet 3000 x 1500 mm - SheetMaster - Operating hours: 65,000 h

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Hfodpfxjy Shc Dj Aqpon

Condition: good (used), functionality: fully functional, Year of construction: 2006, The machine is being sold due to a plant modernization. Only 3,000 operating hours for laser cutting. Immediately available. Inspection and demonstration under power are possible by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser Tube 5000 (T01) Year of manufacture: 2006 Hfodjzlr Rpjpfx Aqpen Control system: Siemens Sinumerik 840D Laser type: CO₂ laser TruFlow Working area, tube length: 6,500 mm Max. round tube diameter: 150 mm Max. rectangular profile / circumscribed circle: 150 mm Max. material weight: 20 kg/m Max. workpiece weight: 130 kg Automatic tube support Self-centering clamping system

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" Hfjdpfxoz Izquj Aqpjn EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: used, Trumpf Type: TC 6000 L 1300 Laser and punching machine Technical data: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN holding-down device): 220 kN Active holding-down device (programmable in stages): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: In punching operation: 35 mm In laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Hodpfx Aqozd Ulaspsfn Simultaneous movement: Punching: 900 min Marking: 2800 min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average position spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Loading and dismantling must be handled by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,020 h, pressing force: 173 t, controller manufacturer: TRUMPF, controller model: TASC 6000, Press brake manufactured in 2017. This TRUMPF TRUBEND CELL 5000 with TRUMPF TruBend 5170 features a maximum press force of 1700 kN and a stroke length of 445 mm. It includes the BendMaster 60 robot for automated handling and a TRUMPF TASC 6000 control system for efficient programming. If you are looking to get high-quality bending capabilities, consider the TRUMPF TRUBEND CELL 5000 press brake we have for sale. Contact us for further details. - Press Brake Model: TruBend 5170 (Extended Version)- Press Brake Max Press Force: 1700 kN- Press Brake Max Working Pressure: 340 bar- Press Brake Length of Stroke: 445 mm- Press Brake Voltage / Frequency: 400 V / 50 Hz- Press Brake Connected Load: 29 kVA- Press Brake Control Voltage: 24 V- Robot Model: BendMaster 60- Robot Connected Load: 17 kVA- Robot Weight: 2600 kg- Robot Voltage / Frequency: 400 V / 50 Hz- Control System: TRUMPF TASC 6000 (Graphical workshop programming, network capability)- Included Equipment: Extended version press brake, BendMaster 60, automated material handling/grippers, fencing and safety enclosuresTRUMPF BENDMASTER 60- Working Hours: 56,582 h (As of 14.05.2025)- Load Capacity: 60 kg (Sheet metal piece plus gripper)- Sheet Metal Capacity: Up to 40 kg- Supply Voltage: 400 V (3~ Phase)- Frequency: 50 Hz- Connected Load: 14 kVA- Control Voltage: 24 V- Max. Fuse Rating: 32 A- Manipulator Axis System: 6-axis backgauge sensor system- Floor Track: Ground track rail extended to 10 m- Control Unit: PC-based TRUMPF control with terminal (Monitor, mouse, keyboard)- Material Handling Features: Contour recognition sheet sensor, double sheet detection sensor, rotary union for rapid tool-less gripper exchange, gripper coupling on BendMaster- Included Vakuum/Gripping Gear: 3 modular vacuum grippers without separation unit, 1 mechanical tong gripper with rotary axis (including 3 sets of additional jaws)- Feeding Station: 1 sheet extraction station with linear axis- Peripheral Accessories: 1 gripper changing console (max. 4), 1 mobile fanning magnet, safety enclosure fence with access door Technical Specification Bending Length 4250 mm Hedpfx Aqjza U Nfopjfn

Condition: ready for operation (used), Year of construction: 2015, operating hours: 67,121 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, laser power: 3,200 W, travel distance X-axis: 6,500 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 170 mm, overall weight: 17,000 kg, total height: 2,800 mm, product length (max.): 16,000 mm, number of axes: 5, Tube cutting machine manufactured in 2015. This TRUMPF TruLaser Tube 5000 features a working range of 6500 mm in the X-axis and 310 mm in the Y-axis, with a maximum workpiece length of 3000 mm. It supports various tube diameters and has a maximum workpiece weight of 130 kg. If you are looking to get high-quality tube cutting capabilities, consider the TRUMPF TruLaser Tube 5000 machine we have for sale. Contact us for further details. • Working range A1 axis (pulling chuck): n x 360° • Working range A2 axis (feed station): n x 360° • Workpiece max. length of raw material: 6500 mm • Workpiece min. length of raw material: 3000 mm • Workpiece min./max. outer diameter (circular): 20–152 mm • Workpiece min./max. side length (rectangular, at max. circumscribed circle 170 mm): 20–150 mm • Workpiece max. length of finished part: 3000 mm • Workpiece min. length of tube remnant: 120 mm • Workpiece max. scrap length: 400 mm • Bundle dimensions max. cross-section: 600 x 750 mm • Bundle dimensions max. weight: 4000 kg • Material weights max. workpiece weight: 130 kg (loading 6.5 m) • Material weights max. workpiece weight per meter: 20 kg/m • Speeds X axis (+): 170 m/min • Speeds X axis (-): 100 m/min • Speeds Y axis: 60 m/min • Speeds Z axis: 60 m/min • Speeds A axis: 780 °/s • Positioning accuracy, position deviation Pa: ±0.2 mm / ±0.015° • Positioning accuracy, mean position dispersion Ps: ±0.06 mm / ±0.005° • Smallest programmable path length: ±0.01 mm / ±0.001° • Lens cutting head focal length: 155 mm • Depth 7000 mm; Length 16000 mm (loading 6.5 m, unloading 3 m) • Laser on hours: 15786 Additional equipment Hfjdpjzlq I Hjfx Aqpen • Option to reduce minimum circular tube outer diameter to 15 mm (from 20 mm) • Option to reduce minimum rectangular tube side length to 15 mm (from 20 mm) • Option to increase max finished part length to 6500 mm (from 3000 mm) • Option “Length of finished parts +1.5 m”: adds 1500 mm to finished part length • Optional 8.0 m loading system: increases max workpiece weight to 160 kg (from 130 kg)

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 Hfedpfexayl Djx Aqpen - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Year of construction: 2007, condition: ready for operation (used), A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible. Hsdpfx Aqsztdr Uepjfn

Condition: good (used), functionality: fully functional, Machine type: Tube laser cutting machine Manufacturer: Trumpf Model: TruLaser Tube 5000 Year of manufacture: 2008 Dimensions: approx. 16 m x 8.2 m x 2.8 m Weight: approx. 17,000 kg Condition: ready for operation (used) Operating hours: 95,473 / 32,866 h (laser on / beam on; as of June 24, 2026) Main drive: 62 kW Laser power (max.): 2000 W Sheet thickness steel (max.): 8 mm Sheet thickness stainless steel (max.): 4 mm Sheet thickness aluminum (max.): 2 mm Travel range X-axis: 6,500 mm Travel range Y-axis: 200 mm Travel range Z-axis: 150 mm Tube diameter (round): 15 mm - 152 mm Tube diameter (square): 20 x 20 mm - 120 x 120 mm Tube diameter (rectangular): 20 x 20 mm - enveloping circle diameter x 150 mm Working length (automatic loading): 3,000 - 6,500 mm Working length (manual loading): Max. 7,500 mm Minimum remaining tube length: 141 mm Control: SIEMENS Sinumerik 840D Maintenance: Annual service by Trumpf HF driver stage renewed (09/2025) Push feeder renewed (07/2023) Equipment: LoadMaster Tube 6.5 m Layout plan (German) Operating manual (German) Stable machine frame with integrated laser unit Rotating and feeding station with self-centering clamping jaws Tube support, raw material with automatically retractable tube supports Push feeder with self-centering parallel clamping rollers High-precision drives Unloading station PRS 3001 with brush table, finished part length up to 3,000 mm Tube support, finished material with extendable guide rollers Closed beam guidance NitroLine (nitrogen is used as cutting gas) SprintLine (optimization of processing speed) Laser power control Programmable cutting gas pressure Automatic shut-off Work area lighting CO2 laser TruFlow 2000 High-frequency excitation Maintenance-free turbo radial fan Laser control TASC 3 Logbook function Laser cooling unit Laser cutting head with 5" lens Cutting head quick-change device ControlLine (collision protection) RJ45 network connection and floppy disk drive CE marking Multi-beam light barriers Monitoring system for gas pressure, temperature and coolant Extraction system, Handte Micropore filter type MF-L Protective cabin with Makrolon panes Nozzles 0.8, 1.0, 1.4, 1.7, 2.3 Clamping jaw sets D 20-85 mm and D 85-150 mm V-shaped molds and guide rollers for round tubes Additional set for U-shaped molds and guide rollers up to enveloping circle diameter 90 mm instead of the standard 120 mm Scrap conveyor with container Loading unit for laser cutting machine Loadmaster Tube 5000 Year of manufacture 2008 Dimensions approx. 2.0 m x 1.95 m x 9.5 m Weight approx. 5,500 kg Ready for operation (used) 3,000 - max. 7,500 mm SIEMENS Simatic Hfjdpfozrt Uiox Aqpen Annual service by Kaste

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Hsdjx D Nwwjpfx Aqpsfn Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Hfedpfxjtltl Ho Aqpon Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 17,000 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, sheet thickness steel (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 60 m/min, cutting speed: 1,200 mm/min, overall weight: 18,000 kg, total length: 7,600 mm, total width: 7,000 mm, total height: 2,500 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, TRUMPF TRUMATIC 5000 AUTOMATED PUNCHING MACHINE Hfodey Rh E Njpfx Aqpen FORMAT SIZE (2500x1250mm). IN PERFECT TECHNICAL CONDITION.

Condition: used, Year of construction: 2018, controller model: , _____ Description: Year of manuf. : 2018 Control : Technical data Year of manufacture:2018 Pressing force approx.:3200 kN Folding length approx.:4420 mm Control system:TASC 6000 Projection:420 mm Free upright clearance approx.:3680 mm Usable installation height approx.:615 mm Machine weight approx.:23400 kg Hedpfx Aqjyy Hgqspjfn Equipment :- Sturdy machine frame :- Press beam, stress relieved with high bending strength :- Spherical bearing of the press beam (inclined position) :- Electro-hydraulic top drive with 4-cylinder technology :- Optical set-up and positioning aid :- Generous edge clearance :- Flat front covers :- Block hydraulics :- Electronic pressure compensator :- Measuring system with glass scale and deflection compensation :- Hydraulic oil in the machine (lifetime lubrication) :- Oil cooler :- Control cabinet cooling via air-to-air heat exchanger :- Modern machine design Extended equipment :- 6-axis backgauge system :- Hydraulic upper tool clamping :- CNC crowning :- Work area lighting front and rear BendMaster (150) :- Sturdy base body and manipulator in cast aluminium construction :- Load capacity 150 kg, plate plus gripper :- Low floor track in welded construction :- Sheet sensor for contour detection :- Rotary feed-through for easy gripper change :- Gripper coupling on BendMaster :- Sensors for 4-axis backgauge system :- Electric drives :- Double sheet detection :- Regripping station NC :- Vacuum generation for suction gripper :- Platform (300 mm) for the bending press Extended BendMaster equipment :Extended BendMaster equipment - Track extension to 12 m :- Sensor system for 6-axis back gauge :- Gripper changing console :- Vacuum gripper, undefined :- Modular vacuum gripper with separation (material for 3 grippers) :- Gripper coupling :- Tong gripper :- Sheet removal station with linear axis :- Side door on right for safety fence

Condition: used, Year of construction: 2002, Trumpf TruPunch 5000 Large Format Travel range of the X-axis in punching mode: 3,050 mm Travel range of the Y-axis in punching mode: 1,550 mm Sheet thickness: max. 8 mm Hjdpjzudwmofx Aqpofn Workpiece weight: max. 200 kg Punching force: max. 220 kN Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm Options: Multi-tool Threading tools Marking function Chip conveyor Vibration-damped installation

Condition: used, Year of construction: 2005, Punching capacity 220 kN plate thickness 8 mm working area 2535x1280 mm Hfedpozk Rfijfx Aqpsn sheet thickness for stainless steel 4-6 mm

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale A late Trumpf 500 just before the 5000r 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: Hfedpfsh Nf Upox Aqpen · Capable of taking multi tool a good selection of tooling available along with multi tools

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Hjdpfx Aozil Dkjqpofn Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Hfsdjng Al Aepfx Aqpen Good condition and can be seen working in production Complete with:

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Hfsdpfx Aqszfaalepsn

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, controller manufacturer: KUKA, controller model: KRC4, laser type: fiber laser, laser source model: TruDisk 4001, type of cooling: water, Equipment: cooling unit, documentation/manual, dust extraction, safety light barrier, - Trumpf TruLaser Weld 5000 - 2021/2022 Year Model - Advanced "turnkey" robotic welding cell - 6-axis industrial robot arm - Enclosed safety housing - Multi-weld techniques & Intelligent Assist System to detect workpiece placement - AI Welding Robot - Serial No. 1422667 - Robot Gantry / Linear Unit KUKA KL 4000 - Serial No. 153080 - Two Axis Workpiece Positioner Model DKP-400 V5 -Serial No. 154987 - TruDisk 4001 - High-power solid-state disk laser source - Serial No. L5211E3364 - Technotrans Fluid/Water Chiller System Model RL 16/0 SK V2 NEC Grav MIZ 1" - Serial No. 40000135731 - KUKA Robot Controller KRC4 -Serial No. 3121117 - Rittal TopTherm Blue E Wall-mounted cooling system - Serial No. 2021K000144111 - Camfil Air Pollution Control Dust Extraction System - Model MF 8-8 A2 Serial No. 10011175 - Two Station Index Rotary Positioner Hedpfx Ajzy T Tzeqpsfn - Equipment available after project completion, available from October 2026 - Within the machine price: Machine operational software comes with the machine - Available at additional costs: Programming solution software available - Other opportunities at additional cost: Extensive Research data library available for weld parameters including some structurally tested and certified parameters. Operator & programmer training available. If you have any questions or need more information, feel free to send us a message or give us a call.