Used Liebherr A 900 Zw for sale (256)

Condition: used, Year of construction: 2008, operating hours: 18,866 h, Liebherr A 900 C ZW Litronic * Year of manufacture: 2008 Njdpfxsxz Ihis Ah Uslk * Operating hours: 18,866 h * Engine: 105 kW (143 hp) Good condition, immediately ready for use Leasing or financing options are available upon request. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale!

Condition: used, Year of construction: 2009, operating hours: 19,616 h, Equipment: all wheel drive, Liebherr A 900 C ZW Litronic * Year of manufacture: 2009 Njdpoxxffyefx Ah Uslk * Operating hours: 19,616 h * Engine: 105 kW (143 hp) Good condition, immediately operational Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information is available on our website. Subject to errors and prior sale!

Condition: used, Year of construction: 2011, operating hours: 19,393 h, Liebherr A 900 C ZW Litronic * Year of manufacture: 2011 * Operating hours: 19,393 h * Engine: 105 kW (143 hp) In good condition, immediately ready for operation. Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (tel.) will be happy to assist you. Further information can be found on our homepage. Subject to errors and prior sale! Nedsxxffmspfx Ah Ujlk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 7,800 h, machine/vehicle number: WLHZ1076TZK055270, TECHNICAL DETAILS Operating Hours Operating hours: approx. 7,800 h Chassis Dimensions Undercarriage transport width: approx. 3,000 mm Chassis centerline (Taurus): approx. 2,280 mm Chassis length: approx. 4,600 mm Boom and Stick Hydraulic boom: 3,600 mm Stick length: 3,050 mm EQUIPMENT - Without bucket and without SMP - 20% wear on the running boards - Defective discs - see photos - Full hydraulic hoses present - Taurus condition commensurate with age Further technical data according to the manufacturer - without guarantee Engine Power according to ISO 9249: 95 kW / 129 hp at 1,800 rpm Engine type: Liebherr D 934 S according to Stage IIIA / Tier 3 Fuel tank capacity: 290 l Automatic idle: sensor-controlled Hydraulic system Hydraulic pump: Liebherr variable-displacement swashplate pump Flow rate: max. 300 l/min Operating pressure: max. 350 bar Pump control and regulation: Liebherr Synchron Comfort System (LSC) with electronic maximum load control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control Hydraulic tank capacity: 175 l Hydraulic system capacity: max. 290 l Control system Power distribution: via control spools with integrated safety valves, simultaneous and independent operation of the chassis, swing, and attachment Equipment and swing operation: with proportional joystick levers Nedjwgm Izspfx Ah Uolk Travel operation: with proportional foot pedal for travel drive Additional functions: via switches or proportional foot pedals Swing Drive: Liebherr swashplate oil motor with integrated Brake valve and torque control Transmission: Liebherr compact planetary gearbox Slewing ring: Liebherr, internally toothed, sealed single-row ball bearing slewing ring Slewing speed: 0 – 9.0 rpm, continuously variable Slewing torque: 42 kNm Undercarriage Drive: One Liebherr swashplate oil motor on each side of the undercarriage with brake valves acting on both sides Transmission: Liebherr compact planetary gearbox Travel speed stage I: 2.4 km/h Travel speed stage II: 5.0 km/h Tensile force: max. 175 kN Undercarriage: B60L, maintenance-free Track rollers/support rollers per side: 8 / 2 Track shoes: 3-grouser Track tension: hydraulic Dimensions Height: 3.1 m Length with folded boom: 8.7 m Undercarriage height: 1.1 m Digging depth: 6.4 m Reach at ground level: 9.7 m

Condition: good (used), functionality: fully functional, power: 88 kW (119.65 HP), Year of construction: 2003, operating hours: 16,870 h, Equipment: additional headlights, cabin, gripper hydraulics, hammer hydraulics, Liebherr R900c Litronic, year 2003 with 16,870 operating hours. The excavator is in very good working condition and immediately ready for use. Transport width is 2.90 m. Transport and delivery possible. Inspection by appointment, also possible on weekends. Nljdpex Ez Nqsfx Ah Usk

Condition: used, Year of construction: 2013, operating hours: 9,900 h, Equipment: all wheel drive, Internal vehicle no.: 944CT German vehicle The machine is currently on its way to our yard in Kaufungen (Kassel) but is already available from its current location. More info from Luis Lucena Nljdpfxsx Hcfie Ah Usk Liebherr R944C T Year of manufacture: 2013 9,900 hours 43.2 tonnes Width: 3,050 mm Good condition, ready for immediate use Subject to errors and changes We are happy to accept your used vehicle in trade-in. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), power: 95 kW (129.16 HP), fuel type: diesel, color: yellow, first registration: 01/2009, Year of construction: 2009, operating hours: 10,839 h, Liebherr A900C - 95 kW - Central Lubrication - Year of Manufacture: 2009 WLHZ1002VZK046325 Hours: 10,839 95 kW Engine Central Lubrication System = Further Information = Model year: 2009 Drive: Wheeled Gross weight: 18,000 kg Technical condition: Good Optical condition: Good Contact VAEX The Truck Traders for further information. Nedpfx Ahexyflvo Ujlk

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing. Nlodpfjxvr Enox Ah Uek

Condition: good (used), functionality: fully functional, fuel type: diesel, overall weight: 15,400 kg, lifting height: 3,150 mm, shovel volume: 0.5 m³, digging bucket width: 2,500 mm, Year of construction: 1995, operating hours: 14,000 h, machine/vehicle number: 3671199, Equipment: cabin, Liebherr A900 Excavator Serial No.: 3671199 Year: 1995 Hours: ~14000 Weight 15.4 t Standard tires 10.00-20 Bucket capacity 0.5 m³ Stabilizers 2 2/4-fach Transport length 7.85 m Transport width 2.5 m Transport height 3.15 m Model series A Engine manufacturer Deutz Engine type Nlsdpfxewcyhys Ah Ujk BF4M1013E

Condition: good (used), power: 95 kW (129.16 HP), fuel type: diesel, first registration: 01/2009, Year of construction: 2009, operating hours: 10,899 h, = Additional Options and Accessories = - Central lubrication = Notes = Liebherr A900C - 95 kW - Central lubrication - Year of manufacture: 2009 Nsdpfx Aexx Rbgsh Uelk WLHZ1002TZK046186 Operating hours: 10,899 95 kW engine Central lubrication = Further Information = Model year: 2009 Drive: Wheeled Gross vehicle weight: 18,000 kg Technical condition: good Visual condition: good

Condition: good (used), power: 140 kW (190.35 HP), fuel type: diesel, color: yellow, Year of construction: 2016, operating hours: 7,405 h, Equipment: air conditioning, Technical information Track width: 90 cm AdBlue system: Yes Make of engine: D934 A7 Top speed: 6 km/h Empty weight: 28.400 kg Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: WLHZ1488TZC043511 Other information EPA Marked: yes Undercarriage condition: 70 Output of the auxiliary hydraulics: 359 l/min Dipper / stick length: 180 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,6x3x3,1 Production country: FR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information Nljdpfex Nc Shox Ah Ujk

Condition: good (used), power: 220 kW (299.12 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 5,730 h, Equipment: air conditioning, Technical information Track width: 70 cm AdBlue system: Yes Make of engine: D936 A7-24 Empty weight: 41.800 kg Functional CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Nledjx I U Skepfx Ah Ujk Visual appearance: good Identification Serial number: WLHZ1491CZC046988 Other information Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 11,4x3,45x3,3 Production country: FR Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information undercarriage renewed at 5560 hours.

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories Njdpfx Aev Dtmmjh Uelk

Condition: good (used), functionality: fully functional, Year of construction: 2023, Basic information Capacity: 150 tons Type: Hydraulic all-terrain crane Year of manufacture: 2023 Main boom: 66 m Jib: 19 m mechanical Stock number: Details Mileage: 43,382 km (as of 06-12-2025) Lower structure operating hours: 1,319 (as of 06-12-2025) Carrier engine: Liebherr Stage V and Tier 4 Final Upper engine: Upper structure operating hours: 3,225 (as of 06-12-2025) Gearbox: ZF Nedpfxjx Nqq Ej Ah Uelk Tire size: 16.00 R25 Axle configuration: 10 x 8 Suspension: Hydro-pneumatic Chassis: Liebherr LMI system: Liccon 2 Load chart: 75% metric Hook blocks: 1 x 3-sheave block and 1 x ball hook Winch: 1 (prepared for second winch) Counterweight: Full set Manuals: Yes Availability: Serial number: Additional information:

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Nljdjxc E H Sopfx Ah Uok Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: excellent (used), fuel type: diesel, color: yellow, first registration: 05/2019, Year of construction: 2019, operating hours: 2,708 h, For sale: Liebherr LH 30 Material Handler. Year of manufacture: May 2019. Excellent condition. Specifications and Features: • Year of manufacture: 05/2019 • Operating hours: 2,708 h • Engine and hydraulics in excellent condition • 5-tine Liebherr orange peel grab • Magnet system including magnet plate • Height-adjustable cab for optimal visibility • Solid rubber tires • High-performance, reliable machine for scrap, recycling, and bulk materials Additional Information: • Single owner • Origin: Germany • Regularly maintained and immediately operational • Clean machine with no known defects Very well-equipped Liebherr LH 30 with low operating hours. Inspection by appointment in Deventer, Netherlands. Contact us for price and further information. = Further Information = Unladen weight: 29,000 kg Payload: 3,000 kg Njdpfx Aox Nwpush Ujlk Gross vehicle weight: 32,000 kg Dimensions (L x W x H): 1020 x 255 x 340 cm CE certification: Yes Technical condition: Excellent Visual condition: Excellent Please contact Gerrit Haverhoek for more information.

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, color: yellow, Year of construction: 2024, operating hours: 15 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: D934 A7-25 Top speed: 6 km/h Empty weight: 33.300 kg Functional CE mark: yes Condition Nledpfx Aex Ed Uyjh Uok General condition: very good Technical condition: very good Visual appearance: very good Identification Serial number: WLHZ1716LZC059244 Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 265 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 10,4x2,99x3,13 Production country: FR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: good (used), power: 150 kW (203.94 HP), gearing type: automatic, fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 5,500 h, Equipment: air conditioning, Technical information Track width: 71,1 cm Empty weight: 25.000 kg Drivetrain AdBlue system: Yes Drive: Track Make of engine: D934 A7-04 Functional CE mark: yes Condition Technical condition: good Visual appearance: good Nlsdpfox I U Ryjx Ah Usk Identification Serial number: VAUZ1155CZT015868 Other information EPA Marked: yes Emission level: Stage V / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 7,3x4,03x3,5 Production country: DE Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: used, max. wheel diameter 1800 mm gear width 725 mm max. module 5 Control Siemens 840D sl axial travel 725 mm turning speed range - stepless 44 - 440 U/min cutter diameter max. 240 mm cutter width - max. 300 mm table diameter 1500 mm boring diameter 350 mm weight of the machine ca. 27 t dimensions of the machine ca. 8,8 x 6,1 x 3,25 m Equipment / Accessories: - max. distance from clamping table to counterholder/to center of milling spindle: 1045 mm - milling spindle: - max. axis distance between milling spindle and clamping spindle with/without counterholder: 1200 mm - min. axis distance between milling spindle and clamping spindle with/without counterholder: 525 mm - quick cutter change device - chip extraction device - milling arbors - documentation Nodpfx Ahsvylirj Ujlk

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm Nlodpfx Aowh Dlmeh Ujk CBN *

Condition: used, Year of construction: 2007, max. dia. of teeth cutting 2000 mm workpiece dia. 2700 mm max. module 22 mm Ring thickness for internal gearing max. 500 Control Siemens 840D table diameter 1500 mm table hole 500 mm Table rpm 3,5 1/min table load 200 kN Stroke length 30-330 mm no. of strokes doubel-strokes per min. 10 - 200 1/min. axis distance 70 ... 1220 mm max. radial velocity 3000 mm/min weight of the machine ca. 38000 kg Equipment/ accessories: - Intermediate plate between head and column: Center distance modified min. 0 mm max. 1500mm - column increased for axial stroke 1200 mm max. - Shaping head drive power 30 kW - spindle diameter 160mm - max. tool diameter 300mm - max. cutter wheel speed 10 1/min - Cutting speed 5 ... 45m/min Nlsdpfx Ahoxylm Hj Uek - max. lateral offset 50mm - coolant device coolant tank capacity 2500 l - documentation

Condition: used, Year of construction: 1985, Technical details: max. wheel diameter: 780 mm gear width: 130 mm max. module: 10 weight of the machine ca.: 8,5 t no. of strokes: 30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Nledpfx Ahjxqgv Re Uok Manufacturer: Liebherr Type: WSC 501 Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height – table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be demonstrated in function upon appointment. Comprehensive documentation is also available The machine is particularly suitable for: ? Internal and external gearing in small batch sizes ? Internal gears in blind holes (non-through bores) ? External gears without run-out, where hobbing would not be possible Typical workpieces include: internal gear rings for planetary gear systems, drive shafts, coupling hubs, and more. Attractive Offer – Liebherr WSC501 CNC Gear Shaping Machine ????? ? ISO 9001 + EN 9100 Certified ? Excellent opportunity to acquire a robust German-made gear shaping machine ? Fully operational, with very limited usage history ? Demonstration possible upon appointment Highlights: - Suitable for internal and external gear shaping in small to medium batch sizes - Unique capability for internal gears in blind holes - Ideal for external gears without run-out, where hobbing would not be possible - Applications: planetary gear rings, drive shafts, coupling hubs, and more ????? Benefit: Save costs compared to new machines while still relying on Liebherr quality. Interested? Contact us today to arrange a viewing or request further technical details. *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm max. module: 5 min. module: 1 weight of the machine ca.: 14 t dimensions of the machine ca.: 4,5 x 2,84 x 2,8 m min. number of teeth: 7 toolpiece turning speed range: 4000-10000 U/min tool length: 210 mm Nsdpfx Ahewv Ug Rs Ujlk With tail stock No dressing device Only CBN *

Condition: used, Year of construction: 2003, Technical details: max. wheel diameter: 80 mm max. module: 3 Nodpfx Aewwlunsh Uelk total power requirement: 25-35 kW weight of the machine ca.: 10 t workpiece weight: 15 kg workpiece length - max.: -50....+450 mm table diameter: 145 mm diameter of hob: 90 mm cutter length max.: 220 mm hob turning speeds: 1.000 U/min

Condition: used, Year of construction: 2008, Technical details: max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 weight of the machine ca.: 14 t table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min Nlsdpexz Akfjfx Ah Uek *