Used Lubrication Pump for sale (11,498)

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Kdsdpfx Aqozvrmroist Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: B0.01177.0628, operating pressure: 570 bar, type of input current: three-phase, input voltage: 400 V, temperature: 70 °C, volume flow: 7.44 m³/h, water pressure: 570 bar, pump capacity: 124 l/min, rotational speed (max.): 1,500 rpm, Equipment: type plate available, For sale is a Hammelmann high-pressure pump unit on a base frame, with a 132 kW three-phase motor and a partially transparent protective housing. The exact model designation is not explicitly stated on the existing nameplates; the following data for the offered machine are decisive. Technical data according to the pump and motor nameplates: - Machine number: B0.01177.0628 - Order number: 09.11179.1046 - Year of manufacture: 2010 - Maximum operating pressure: 570 bar - Flow rate: 124 l/min - Piston diameter: 40 mm - Pump drive power: 131 kW - Speed: 1,500 rpm - Maximum fluid temperature: 70 °C - Pressure control valve: 0022 - Oil type: BM 320 - Oil quantity: 12.5 l Kedpfx Aezzr Nqoqiedt - Oil pressure: 2.0 bar - Motor: AC Motoren GmbH/Küenle AH 315 MA-4 - Motor power at 50 Hz: 132 kW - Motor voltage at 50 Hz: 380–420 V Δ / 660–720 V Y - Motor protection class: IP55 Visible scope of supply according to the images: - Hammelmann high-pressure pump - 132 kW three-phase motor - Coupling and drive - Pressure control and safety valves - Lubrication/oil unit - Connection lines and cables - Base frame and partially transparent protective housing Used condition with dirt and/or oil stains, paint chipping and surface rust, especially on the motor protection grille. The functional condition has not been re-checked after disassembly; therefore, it is sold as untested. No separate control cabinet, no lance, and no long high-pressure hose are included. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard Kdsdjzd Utwepfx Aqiet CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Condition - Good

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Zhejiang Baina 150 20D 1000Kg/h extruder The extruder is almost new and is available immediately with a few operating hours. Manufacturer: Zhejiang Baina Type: E150-01-00 Year of manufacture: 2020 External dimensions (L × W × H): 4200 × 1600 × 1500 mm Side rollers; the driving force is provided by the screw, with active dosing Coordinated operation of the feed roller gear drive and the screw drive, with automatic lubrication system Screw material: 38GrMoAcA Screw hardness: HRC 65–68 Steel bushing hardness: HRC 65–70 Nitriding depth: 0.4–0.7 mm Screw design: Design with suction groove for vacuum suction Pressure control, pressure protection value adjustable between 0–35 MPa; with temperature sensor. Screw diameter: 150 mm Screw speed: 1–50 rpm Maximum output: Approx. 1000 kg/h Number of heating stages / output: 7 × 6 kW Cooling stage: 1 stage (side rollers) Vacuum pump output: 2.2 kW Temperature control Automatic heating and cooling control with electromagnetic valve Circulation pump: Weile Cooling water pressure: 0.15–2 kg/cm² Temperature control accuracy: ±1 °C Screw and gear connection: Involute gear connection Motor and reducer drive: Belt drive Hardened gear type: ZLYJ420-28-I (involute gear reducer) Motor power: 160 kW Kdjdpfjy Ez Erox Aqijt Total installed power: 204 kW Speed ​​control: Frequency converter control

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, BUSCH R5 RA 1000 B | Rotary vacuum pump / High-performance vacuum unit Manufacturer: Busch Vacuum Solutions Model / Type: R5 RA 1000 B 4Z1 EKXX Serial number: C035000168 Year of manufacture: 2003 Power supply: 400 V / 3 Ph / 50 Hz Capacity: 1000 m³/h Kdjdpfx Aey Umv Ioqiot Rotational speed: 1000-1200 rpm Overall dimensions: 1800 x 1000 x 1700 mm The Busch R5 RA 1000 B, an industrial rotary vacuum pump, is one of the most reliable and powerful vacuum devices available on the market. This model, with its enormous suction capacity of up to 1000 m³/h, has been designed for continuous, uncompromising operation in the most demanding industrial environments. Devices of this class are the heart of the machinery in large meat processing plants, slaughterhouses, food packaging plants, as well as in the chemical industry and plastics processing. The pump's design is based on proven oil-lubricated rotary vane technology, which allows for achieving stable, very high ultimate vacuum while maintaining quiet operation and optimal system temperature. The RA 1000 B model is characterized by exceptional resistance to water vapor and volatile product particles thanks to its advanced, internal oil filtration and recirculation system. Using this pump as a central vacuum unit allows for the simultaneous operation of multiple packaging or process machines in production halls, resulting in significant energy savings and simplified maintenance.

Condition: refurbished (used), Year of construction: 1989, functionality: fully functional, rotary table diameter: 1,500 mm, grinding height: 457 mm, total height: 3,124 mm, total width: 3,150 mm, total length: 4,165 mm, overall weight: 15,000 kg, grinding wheel diameter: 863 mm, grinding spindle speed: 450 rpm, power: 45 kW (61.18 HP), table diameter: 1,500 mm, LUMSDEN Model 93ML Vertical Rotary Surface Grinder. Refurbished with new bearings in table and spindle, reconditioned main motor, new rectifyer, lubrication system, new control panel. Serial Number: to be advised New 1980's originally Country of Origin: UK Segmental wheel dia 34" Segments per set 16" Table dia and grinding capacity 60" Magnetic table dia (Humphreys) 60" Max height wheel to Magnetic table 18" Minimum height of wheel to table 4.1/2" Kdjdpjwugh Defx Aqijt Spindle speed 450 rpm. Table speeds 16 and 5.1/2 rpm. Automatic feeds 10 rates .004-.040 ins/min. Power elevation 25 ins/min. Spindle motor 60 Hp / 960 rpm 45 kW Table motor 6/2.1/2 HP /1440/480rpm. Feed motor 1/4 Hp / 1440 rpm. Elevation motor 1 Hp / 720 rpm. Coolant pump motor 1 Hp / 1440 rpm. Overall height of machine 10'3". Floor space 13'8" x 10'4". Approx net weight 15 tons.

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Materials to be pumped Kdedpfoiu U Txjx Aqiet Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Condition: excellent (used), mileage: 205,766 km, fuel type: diesel, axle configuration: 8x4, wheelbase: 5,400 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, soot filter, = Additional options and equipment = - Aluminum fuel tank - Leaf suspension - Power brake booster - Low noise - Speed limiter - LED lights - Air horn - Media system Kdsdpfx Aewhpideqiet - Particulate filter - Sun visor - Stability control - Toolbox - PTO (power take-off) - Central lubrication = Further Information = General Information Year of manufacture: 2019 Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Unladen weight: 33,570 kg Axle configuration Front axle 1: Max. axle load: 9,000 kg; Steering Front axle 2: Max. axle load: 9,000 kg; Steering Rear axle 1: Double tires; Max. axle load: 13,000 kg Rear axle 2: Double tires; Max. axle load: 13,000 kg Condition Technical condition: Very good Visual condition: Very good MERCEDES 4451 AROCS 8X4 SERMAC 5Z42 METER CONCRETE PUMP EURO 6 L PACKAGE 510 HP DRIVE 8X4 WHEELBASE 540 CM LEAF SPRING SUSPENSION DIFF LOCKS CAB WITH AIR CONDITIONING AND NAVIGATION SYSTEM AUTOMATIC TRANSMISSION WITH ENGINE BRAKE SERMAC 5Z42 METER CONCRETE PUMP CE CERTIFICATE MAX. VERTICAL REACH 40.7 M MAX. HORIZONTAL REACH 36.7 M MAX. REACH DOWNWARDS -28.4 M NUMBER OF BOOM SECTIONS 5 MIN. UNFOLDING HEIGHT 8 M BOOM ROTATION 370° PARTIAL WIDTH JOINTS 90° - 180° - 240° - 180° - 266° BOOM UNFOLDING SYSTEM Z FRONT BOOM TELESCOPIC X-TYPE REAR BOOM PIVOTABLE OUTRIGGER SPREAD FRONT 8.3 M OUTRIGGER SPREAD REAR 8 M RUBBER HOSE LENGTH 4 M CENTRAL LUBRICATION SYSTEM ON PUMP PUMP AG9L10-194-80 CAPACITY 194 M3 PER HOUR FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK ENGLISH WE SPEAK SPANISH

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Kedpfxexv Apws Aqiodt Water Treatment: Used in dosing and chemical feed systems

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. Kdjdpfx Aezr N H Ueqiet • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Kdodexx Tigepfx Aqiot Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Year of construction: 2016, condition: as good as new (ex-display), Rotary vane vacuum pump Oil-lubricated Manufacturer: Busch Type: R5 RA 250D Kodpfx Aqec S D Dhsiodt Condition: Demonstration unit Warranty: 12 months Operating fluid: Mineral oil Accessories: Suction filter Delivery time: in stock

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). Kedozvmy Hspfx Aqijdt 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Kdedeqabiaopfx Aqijt Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: used, total width: 15,030 mm, total height: 28,890 mm, Year of construction: 2024, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. ...). Putzmeister Mixokret M 760 DHBS concrete/screed pump. Kodpfjzkx Tujx Aqijdt Year of manufacture: 2024, overrun brake, central lubrication system, tire tread: 6mm, Deutz engine TD 2.2 L3. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes, and prior sale are subject to change!!! = Further information = Unladen weight: 1,900 kg Payload: 100 kg GVW: 2,000 kg Please contact Tobias Ebert for further information.

Condition: good (used), Vacuum pump, rotary vane pump, rotary vane vacuum pump, pressure/vacuum pump, rotary vane pressure/vacuum pump -Drive: 3 kW -Flow rate: 30 m³/h Kdodpfx Ajb A Nyxoqist -Max. vacuum: 50 mbar -Oil-lubricated -Speed: 1430 rpm -Dimensions: 600/450/H480 mm -Weight: 110 kg

Condition: used, Technical specifications: Max. planing width: 230 mm Max. planing height: 130 mm Kdjdpfezza Ibox Aqijt Spindle diameter: 40 mm Number of spindles: 4 Spindle arrangement: bottom 5.5 kW right + left 11 kW top 7.5 kW Number of steel feed rollers: 4 Number of rubber feed rollers: 1 Diameter of extraction nozzle: 120/140 mm Infinitely variable feed speed adjustment: 6-22 m/min Feed via cardan shafts Lubrication pump for the work table 1 smooth roller in the table Pressure: 6 atm Power supply: 400 V Overall dimensions: Length: 3300 mm Width: 1460 mm Height: 1850 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. Kjdpew U Tlzefx Aqisdt R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Kilia 325 Liter Cutter 5000 Express – Factory overhauled 2025 Powerful high-performance cutter system with extensive general overhaul – ready for continuous use in professional food processing Top Features & Highlights: Overhauled in 2025 – numerous main components newly installed: Vacuum pump Base plate Main motor & plate motor Knife shaft incl. bearing Electronic control incl. new control cabinet (stainless steel) Frequency converter Hydraulic cylinder & unit Ejector motor & bearing Feeder motor & bearing Electronic control panel with 10-inch touch panel & joysticks All scrapers Technical equipment: Robust stainless steel design (machine & bowl) High-performance knife shaft drive, infinitely variable from 50–4000 rpm, with reverse (50–500 rpm) Knife shaft drive power: 81 kW, bowl: 3 kW (400 V, 50 Hz) Hydraulically operated noise protection cover (double-walled, stainless steel) Fully automatic ejector (hydraulic) Maintenance-free knife shaft system Kodpeyk Tuuefx Aqijdt Automatic central lubrication (ADS 100) Knife shaft brake (electric) 6-knife set Knecht K24 Thermometer & tachometer with end shut-off (electronic) Hydraulic knife tension nut Loading system for 200-liter trolleys (hydraulic) Vacuum function for highest product quality Integrated maintenance and inspection module Remote diagnosis via encrypted internet connection (broadband required) Separate stainless steel control cabinet (wall-mountable) Manual or automatic water addition

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,500 h, machine/vehicle number: S40-5934, load capacity: 227 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Top maintained – extensive repairs – ready for immediate use For sale is a Genie S45 telescopic boom lift in very good technical condition. The boom lift has undergone extensive refurbishment and regular maintenance in the last two years. All invoices are available and can be viewed during inspection. Technical data • Manufacturer: Genie • Model: S45 • Year of manufacture: 2001 • Operating hours: approx. 6,500 h • Working height: 15.7 m • Platform height: 13.7 m • Lateral reach: 9.65 m • Load capacity: 227 kg • Drive: Diesel • Four-wheel drive • Serial number: S40-5934 Extensive investments: In 2023, the engine underwent extensive overhaul (invoice for €9,013 gross): • Engine completely serviced • Connecting rod and crankshaft bearings replaced • Piston rings replaced • Cylinder head gasket replaced • Starter replaced • Oil, air, and diesel filters replaced • V-belt replaced • Numerous other wear parts replaced In 2024, further extensive maintenance and hydraulic work was carried out (invoice for €5,254 gross): • Swing drive motor replaced • Hydraulic pump sealed • Hydraulic hoses replaced • Hydraulic oil replaced • Engine oil and all filters replaced • Machine completely lubricated • Functional test performed Kjdpezrgmrofx Aqiodt • Safety inspection performed Condition • Technically fully functional • Ready for immediate use • Normal age-related signs of wear • No known defects • Inspection and test operation possible at any time by appointment. In 2023 and 2024, over €14,000 was invested in the machine. As a result, the boom lift is in significantly better technical condition than many comparable machines of this year of manufacture. Price: €13,900 net negotiable (16,680 € gross) Location: Laakirchen (Upper Austria)

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: A06D, Used unit of VerderAir VA50 Air-Operated Double Diaphragm (AODD) pumps with stainless steel configurations. The specific arrangement code you provided (VA50 SS SS TF TF) designates a heavy-duty metallic pump constructed with a stainless steel fluid section, stainless steel seats, and PTFE (Teflon) balls and diaphragms. SKU 810.2392, serial number: A06D, year of manufacture: 2006, maximum air pressure: 8.5 bar; MFR: 568 L/min; good condition This Air Operated Diaphragm Pump is suitable for the transfer of chemicals, solvents, flammable liquids, and fluids with abrasive particles. Constructed of stainless steel and PTFE (Teflon) Energy efficient Easy to install, operate and maintain Anti-ice muffler Free of air lubrication Non-stalling air valve Can run dry without damage Dry self-priming Key Technical Specifications Knowing these parameters can help you accurately list your pump for sale or verify if it meets your facility's operational needs: Maximum Flow Rate: 568 L/min (approx. 150 GPM) Maximum Discharge Pressure: 8.4 bar (approx. 122 PSI) Liquid Connections: 2" BSP/NPT Kodez Dh Ulepfx Aqiodt Air Inlet Connection: 1/2" NPT Wetted Materials: Stainless Steel (SS) housing with PTFE (TF) diaphragms/balls, making it highly resistant to aggressive chemicals, solvents, and abrasive media. Maximum Suction Lift: 2.5 m (dry) / 5.5 m (wet) Certification: Standard metallic configurations usually come with ATEX certification for hazardous environments Price 5.190 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), Rotary vane vacuum pump Oil-lubricated Manufacturer: Busch Type: RA 0063F Includes: Oil filling Condition: Demonstration unit Warranty: 12 months Kdodpfoc Sy Ttjx Aqiot Delivery time: In stock

Condition: good (used), Year of construction: 2019, REF: MM6469 Complete tube filling and sealing system, comprising of the following equipment: Kdsdpfxszp E Sbs Aqiot 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA10001621, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 3,086 mm, travel distance Y-axis: 2,185 mm, travel distance Z-axis: 150 mm, workpiece height (max.): 150 mm, number of slots in tool magazine: 20, controller manufacturer: SCM, overall weight: 2,550 kg, feed length X-axis: 3,770 mm, feed length Y-axis: 2,585 mm, feed length Z-axis: 250 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 9,500 W, nominal power (apparent): 29 kVA, number of spindles: 1, rapid traverse Z-axis: 15 m/min, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,500 rpm, spindle speed (max.): 24,000 rpm, spindle speed (min.): 1,500 rpm, tool diameter: 160 mm, tool length: 160 mm, distance between spindles: 32 mm, Equipment: chip conveyor, documentation/manual, SCM MORBIDELLI N100 22-31 C – CNC Milling and Drilling Machining Center Brand and Model: SCM MORBIDELLI N100 22-31 C Serial Number: AA10001621 Year of Production: 2019 Condition: Excellent Location: Croatia Technical Specifications: Working Area (X x Y x Z): 3086 x 2185 x 150 mm Vacuum Table: High Efficiency Multipurpose Aluminum Table (HE) Vertical Drilling Head: 12 Spindles (7X / 5Y), 8000 rpm Horizontal Drilling: 3 Units (2X + 1Y), 8000 rpm Integrated Saw (X-Axis): Ø125 mm, 10000 rpm Main Milling Spindle: 9.5 kW (13 HP), HSK 63F, 24000 rpm Tool changer: 20 positions (19 at the rear + 1 in the cabin for quick change) Vacuum pumps: 2 x 250/300 m³/h Dust extraction: 5300 m³/h + 3400 m³/h for unloading pusher, Ø250 mm Machine weight: approx. 2550 kg Total installed power: 23–28.5 kW Control and software: Control via Xilog Maestro system + Eye-M PRO console Industrial computer with Windows Embedded 7 operating system 21.5" touch screen Included nesting optimization module and additional software licenses Built-in accessories: Kjdpswtdt Ujfx Aqiedt 1. Automatic tool length measuring device 2. TECPAD remote control with 7” touch screen 3. Lateral pick-up for additional tools 4. F18L doweling machine with RO-AX system 5. Two-field positioning for work in two working zones (A + D) 6. Automatic central lubrication 7. Air blowing and micro-lubrication system for processing demanding materials (e.g. aluminum panels) 8. Vacuum cup set 9. Automated unloading system: pusher + conveyor belt 10. Predisposition for automatic loading device 11. Interpolating vector axis with digital control for the 4th axis The machine has been used exclusively in professional conditions, regularly maintained and fully functional. Ready for immediate use in industrial production.

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Ksdshhruhepfx Aqiodt Useful working area 2690x940 x Z 150mm (300mm). 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.