Used Maho Mh 400 P for sale (443)

Condition: used, Year of construction: 1993, Table size: 800x400 mm Dedpfowtdv Asx Aa Nscd Including accessories, various holders

Condition: repair required (used), Year of construction: 2005, machine/vehicle number: 2731660/C 0000, functionality: not functional, operating hours: 44,050 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, Machining center with chip conveyor and belt filter system. Travel X/Y/Z 600/400/425mm Speed range 20 to 18,000 1/min AC main drive 35/25 kW (40/100% ED) 3D path control SINUMERIK 840D powerline Tool change/ 25 magazine positions HSK-A 63 tool holder Shuttle table Clamping surface 2x660x400 mm Infrared measuring probe Heidenhain TS 641 Internal cooling lubricant supply (IKZ) 40bar / 23l/min / 600L container Scraper belt conveyor discharge height 1000mm incl. coolant tank 200L Gravity paper belt filter Rotating viewing window Oil and emulsion mist separator with mechanical filter Work area flushing - chip flushing Dcodpfx Aaorl Rwxo Nod Flow rate: 100l/min Pressure: 1bar Electronic handwheel SIEMENS SINDIC data transmission between network and SINUMERIK 840D Machine is sold as in need of repair. There is a defect in the sensor for the tool changer (position detection). Please send technical questions in writing. >>> Commercial sale

Condition: excellent (used), Working travels 400 x 210 x 340 mm Dcodpfxexpubre Aa Nsd Table size 600 x 400 mm Spindle taper ISO40 Spindle speeds 40-2000 rpm digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: reconditioned (used), functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 380 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 63 rpm, quill stroke: 50 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 4 m/min, table width: 800 mm, table length: 360 mm, table load: 200 kg, overall weight: 1,600 kg, workpiece weight (max.): 200 kg, power: 5 kW (6.80 HP), year of last overhaul: 2024, Ladies and Gentlemen, We are selling a Maho MH500M universal milling machine, which stands out due to its extremely simple and convenient operation. For example, all feeds can be infinitely adjusted by potentiometer. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. Availability: on request Working range X: 500 mm Working range Y: 380 mm Working range Z: 350 mm Speed range of the main spindle: 63 - 4,000 min/-1 Gear stages: 2 Tool holder: SK 40 Tool clamping: Hydraulic Quill stroke: 50 mm Table variant: rigid Table clamping surface: 800 x 360 mm T-slots: 14H7 - 5 / 63 Max. table load: 200 kg Feed speed: 1 - 2,000 mm/min Rapid traverse ( X / Y / Z ): 4 / 2 / 4 m/min Total power requirement: 5 kW Machine weight: approx. 1.6 t Space requirement: approx. 3.0 x 3.0 x 2.5 m Additional equipment and accessories: coolant device, work lamp, electrical supports, foot pedal for tool clamping (optional) Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked Dcjdpfernnf Nox Aa Njd - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Djdpfev Sy Sfsx Aa Nscd Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: used, Year of construction: 2006, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.200 mm C-axis 360 x 0,001 ° A - axis ° Control SINUMERIK 840D Powerline SIEMENS Size of table plate 900 x 700 mm milling spindle - taper HSK - A100 spindle turning speed - stepless 12000 U/min toolpiece magazine: chain magazine 180 Stück total power requirement 85 kW weight of the machine ca. 20,5 t dimensions of the machine ca. 6,5 x 6,1 x 3,5 m 5-axis machining center with horizontal milling spindle arrangement SIEMENS SINUMERIK 840D Powerline control system Electronic handwheel NC swivel rotary table Rotoclear window Measuring probe ready Blum laser tool measurement Vibration sensor Tool taper cleaning Dcjdpfx Aajw E Nnns Ned 4th operating mode Internal coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling/heating unit

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. TECHNICAL DETAILS Travel X-axis: 830 mm Djdpfxsymn Saj Aa Njcd Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Tool holder: SK 40 Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery.

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 323, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: SIEMENS SINUMERIK 840 D, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection between 08.04.2026 and 16.04.2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Travel B-axis: 360° Pallet dimensions: 2 units, 500 x 400 mm MACHINE DETAILS Control unit: SIEMENS SINUMERIK 840 D Dsdsyk Ulnspfx Aa Nocd Connected load: 60 kVA Operating voltage: 400 V Frequency: 50 Hz Rated current: 90 A Dimensions & weight Dimensions (L x W x H): 5,000 x 5,000 x 3,000 mm Weight: 12,000 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Model: DMU 70VL Djdpfx Asyk S Hpea Nocd Year of manufacture: 2001

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale DECKEL MAHO DMU 100 T machining centre – 5 continuous axes: Description: CNC vertical machining centre with 5 simultaneous axes, designed for complex precision parts machining (mould making, aerospace, automotive, etc.). Technical specifications: - Model: Deckel Maho DMU 100 T - CNC control: Heidenhain iTNC 530 - Axes: X / Y / Z + B rotation + A rotation (simultaneous 5-axis machining) Axis travels: - X-axis: approx. 1050–1150 mm - Y-axis: approx. 710–750 mm - Z-axis: approx. 710 mm Spindle and tooling: - Spindle speed: Up to 18,000 rpm - Spindle power: approx. 28 kW - Tool mounting: SK 40 - Tool magazine: 32 positions Table and capacity: - Type: Integrated NC rotary table - Dimensions: approx. 800 x 800 mm - Max load: 500–800 kg Dimensions and weight: - Machine weight: approx. 9,500–10,000 kg Dsdsyc Tzljpfx Aa Njcd - Dimensions: approx. 3500 x 2500 x 3000 mm (L x W x H) I remain at your disposal for any further information.

Condition: used, Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining Center Deckel Maho 5-Axis Simultaneous Type: DMU 70 Evolution Year: 2003 CNC Heidenhain iTNC 530 With Erowa Robot 3R System Sold Complete Djdpfxoypb Rno Aa Nscd With Tooling With Documentation With Chip Conveyor

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Center 5-Axis Simultaneous Dcedsypb N Djpfx Aa Nod Type DMU 70 Evolution Year 2007 CNC Heidenhain iTNC 530 Sold complete With tooling With documentation With chip conveyor

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm Dcedpfoym Sdyox Aa Nsd A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Djdpfx Asym R Tgea Necd Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2009, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 / 74 Nm Dsdoypv Tdjpfx Aa Njcd tool taper HSK A 63 table surface area 630 x 500 mm max. table load 200 kg Swivel range -110 / +5 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. tool taper HSK A 63 max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm rapid traverse 24 m/min Feed force 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 3,5 x 3,5 x 2,8 m CNC - Milling Machine Universal DMG DECKEL MAHO - DMU 50 New Design - 5 Axis (3+2) - swivable rotary table - only 1.946 Spindle hours - Chip tray AND chip conveyor included - PREPARATION Probe

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Machine Benefits Technical Machine Benefits Djdpfx Ajyrd Hwsa Necd • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 3, This 3-axis DECKEL MAHO 64 V linear was manufactured in 2002. It features an SK40 tool holder and a 30-tool automatic tool changer. The machine includes a paper band filter. Note, the probe requires servicing due to a communication error. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO 64 V linear machine we have for sale. Contact us for more information. • ATC capacity: 30 tools Additional equipment • Paper band filter (coolant filtration) • Probe (needs service; communication error) Technical Specification Taper Size SK 40 Dcjdpfx Aex D E Hhja Ned

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,650 mm, table load: 600 kg, overall weight: 5,500 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. • Tool magazine: 20 stations • Table size: approx. 790 × 560 mm Additional equipment • 3D probe • Coolant: external coolant supply only (no through-spindle/internal coolant) Dedox D Epcepfx Aa Nscd • Chip conveyor: not included Dimensions Machine Depth 2050 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Dcjdpfx Aasx Nr Tus Njd Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430M, This 4-axis DECKEL MAHO DMU 60 T was manufactured in 2001. It features a Heidenhain TNC 426/430M control, a working area of 630x530x630 mm, and a spindle speed of 12,000 rpm. The swivel B axis can rotate 180 degrees, and it includes two tool magazines with 12 positions each. Consider the opportunity to buy this DECKEL MAHO DMU 60 T vertical machining centre. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Milling time: 29633 hours/ machine on time: 79606 hours • Swivel b axis: 180 degrees • Two tool magazines with 12 positions each / laser tool measurement for length and diameter "blum" • Spindle speed: 12000 rpm Dodoyaqdxjpfx Aa Nscd • Working area dimensions: 630x530x630 mm

Condition: ready for operation (used), Year of construction: 2002, controller manufacturer: HEIDENHAIN, number of axes: 5, This 5-axis DECKEL MAHO DMU 50 eVolution was manufactured in 2002. Ideal for complex machining tasks, this vertical machining center ensures precision and versatility in a compact footprint. Consider the opportunity to buy this DECKEL MAHO DMU 50 eVolution vertical machining center. Contact us for more information. Machine Benefits Technical Machine Benefits • This summary includes only the relevant information as per the provided details and instructions. Extra Information Machine still under power Dcsdpfx Aoyaimxea Ned

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, number of axes: 3, This 3-axis DECKEL MAHO DMU 200T was manufactured in 2001. It features a Heidenhain TNC 426 control, a spindle speed of 5000 rpm, and movement lengths of X: 1800 mm, Y: 2000 mm, Z: 1100 mm. It also includes an HSK-E32 tool holder with 60 slots. If you are looking to get high quality milling capabilities consider the DECKEL MAHO DMU 200T machine we have for sale. Contact us for more information. Extra Information Dedpfxeyair Io Aa Njcd Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,069 h, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 200 kg, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,000 W, tool weight: 6,000 g, This 5s DMG DECKEL MAHO DMU 50 was manufactured in 2005. It features a HEIDENHAIN iTNC 530 CNC control, with a spindle speed range of 20 – 10,000 rpm and a tool magazine capacity of 16 pockets. The machine offers a maximum table load of approximately 200 kg and a rapid traverse of 24–30 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 50 vertical machining centre. Contact us for further details. • Table clamping area: approx. 500 × 380 mm • Swivel axis (B): about −10°/−5° to +110° • Rotary axis (C): 360° continuous Dcodpfjyifhbex Aa Nsd • Tool magazine capacity: 16 pockets • Max. tool diameter: about 80 mm (130 mm with free adjacent pocket) • Max. tool length: approx. 300 mm • Rapid traverse (X/Y/Z): 24–30 m/min (depending on version)

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 630 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: SIEMENS, controller model: 840 D, table width: 500 mm, table length: 500 mm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of slots in tool magazine: 303, number of axes: 4, This DMG DMC 60H Linear Horizontal Machining center was manufactured in the year 2013 and has 46048 production hours. It is equipped with a Siemens 840 D control unit and has 4 axis. The machine has a spindle speed of 18000 rpm. See original delivery note as PDF (German) attached to see all technical positions. Additional equipment • Scraper belt chip conveyor with coolant system 980 liter, paper belt filter, discharge height 950 mm, width 380 mm, IKZ 80 bar / 14 l/min through spindle center (AD), pressure infinitely programmable, selectable via NC program, Roof flushing of the working area 180 l/min via flushing nozzles with a ripple valve Dcodpjyi Ekfefx Aa Njd • Rotating viewing window / work area door • Flushing gun with pump • Double gripper • Wheel magazine • NC rotary table Ø 630 mm • 3D path control Machine Benefits Qualitative Machine Benefits • Mcis tdi tool management (module tdi machine) - overview , tool handling, planning • Extraction mechanical and electrical preparation for oil mist extraction • Tool breakage check mechanical design Technical Machine Benefits • Number of pallets: 12 // round pallet storage: rs 12 • Rotary pallet changer // work table with pallet support // permissible load: 600 kg // 2 pallets 500 x 500 mm with t-slots // pallet management // pallet changer cladding // claw flushing pallet • Cooling through the spindle center: 80 bar • Tool magazine: wheel magazine (5 wheels) with 303 magazine slots hsk a63 • Infrared measuring probe renishaw pp60 optical (omp60) hsk-a 63 • Mpc machine protection control (machine protection through rapid shutdown) • Laminated glass safety pane for right-hand cabin door window Extra Information Documentation and Electrical circuit diagram (German) available

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,478 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, table load: 600 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It features a Siemens 840D control unit, a spindle speed of 10,000 rpm, and a tool changer with 20 positions. The table measures 790 x 560 mm with a maximum load of 600 kg. Rapid traverse rate is 30 m/min. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V vertical machining centre. Contact us for more information about this machine. • Operating hours: 19,478 h • Table size: 790 x 560 mm Dcedpjyca Npjfx Aa Nod • Rapid traverse: 30 m/min • Tool changer: 20 positions • Condition: Both machines are in good working condition Technical Specification Taper Size SK 40