Used Manitou Mt 425 Cp for sale (829)

Condition: new, Year of construction: 2023, load capacity: 3,000 kg, lifting height: 6,900 mm, total length: 5,920 mm, - Max. Tragkraft 3000 kg - Max. Hubhöhe 6.90 m - Maximale seitliche Reichweite 4 m - Kippwinkel 11 ° - Schüttwinkel 116 ° - Wenderadius (über Räder) 3.33 m - Getriebetyp Hydrostatisch - Standard Bereifung ALLIANCE 380/75 R20 148A8 A580 - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Lenkräder (vorne / hinten) 4 / 4 - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Heben 9.42 s - Senken 7.53 s - Teleskop ausfahren 7.43 s - Teleskop Einfahren 9.36 s - Ankippen 3.21 s - Auskippen 2.15 s - Motornorm Stage V - Motor Modell V3307-CR-TE5B - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm - Nennleistung Verbrennungsmotor - Leistung (kW) 55.92 kW / 54.60 kW - Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm - Zugkraft 3860 daN - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 24.90 km/h - Festellbremse Hydraulik - Pumpenart Zahnradpumpe Fedpfxsxd H Awe Ahpsgd - Hydraulikfördermenge / Hydraulikdruck 88 l/min / 245 bar - Motoröl 11 l - Hydrauliköl 115 l - Fassungsvermögen des Kraftstofftanks 90 l - Geräuschpegel im Fahrerstand (LpA) 74 dB - Umgebungsgeräusch (LwA) 103 dB - Schwingungsbelastung Hand/Arm < 2.50 m/s² - Lenkräder (vorne / hinten) 4 / 4

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,400 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 75 kW (101.97 HP), fork length: 1,200 mm, drive type: Diesel, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Hydrostatic Fgjdpfx Aoxvt Ecjhpsd Condition: Ready for use and fully operational Technical condition: Good Front tyre type: Pneumatic Front tyre size: 440/80-24 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 440/80-24 Rear tyre condition: 60 - 80% Third hydraulic valve, rear work lights, front work lights, heater, road approval (STVZO), full cab, CE certificate,

Condition: used, functionality: fully functional, machine/vehicle number: 995340, Year of construction: 2018, operating hours: 2,255 h, load capacity: 3,500 kg, lifting height: 11,050 mm, fuel type: diesel, construction height: 2,420 mm, power: 75 kW (101.97 HP), drive type: Diesel, Rigid Telescopic Handler Chassis number: 995340 Load centre: 500 Speed class: 20 Condition: Ready for operation and fully functional Technical condition: very good Front tyre type: pneumatic Front tyre size: 440/80-24 Fjdpfeya Rggox Ahpegd Front tyre condition: 60-80% Rear tyre type: pneumatic Rear tyre size: 400/80-24 Rear tyre condition: 60-80% Description: Rotating beacon, reverse alarm, rear license plate lighting. Bucket. 3rd hydraulic valve, rear work light, front work light, heater, STVZO, full cab, operator's manual, inspection booklet, declaration of conformity.

Condition: excellent (used), functionality: fully functional, maximum load weight: 3,500 kg, lifting height: 14,000 mm, Year of construction: 2007, operating hours: 5,700 h, TELEHANDLER Manitou MT 1435 HSL Turbo Year 2007 Fsdpfoyy R Npox Ahpsgd Lifting height 14 meters Capacity 3.500 kg Working hours 5700 Diesel engine Forks Regular documentation

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 660 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Technical condition: good Front tire type: Pneumatic Fedpfxezkwvce Ahpsgd Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% 3rd valve, full cabin

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovations on low-rise buildings. The compact machine, with a width of 1.80 m and a height of less than 2 m, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy handling. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine compartment. The 90 l gear pump enables simultaneous movements of the boom and the telescope, thus providing an increase in productivity. Fedpfezif N Tjx Ahpogd 3rd valve, full cab, air conditioning, CE certificate.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 15 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: electric, mast type: telescopic, construction height: 1,920 mm, power: 40 kW (54.38 HP), fork length: 1,200 mm, empty load weight: 4,755 kg, total length: 3,894 mm, drive type: Elektro, construction width: 1,813 mm, Rigid telehandler Load center: 500 mm Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 km/h Condition: New machine Technical condition: New Front tyres type: Non-marking Fgedpfjzif N Hex Ahped Front tyres condition: 80 - 100% Rear tyres type: Non-marking Rear tyres condition: 80 - 100% Battery voltage: 100V Battery capacity: 348Ah Battery manufacturer: Manitou Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: 80 - 100% Description: Manitou telehandler 625, 100% electric. The first 100% electric Manitou telehandler, specially developed for use in the construction sector! A compact, versatile machine for all your material handling needs—quiet, emission-free, and with no compromises in performance. With a lifting height of 5.85 m, a load capacity of 2.5 t, a ground clearance of 33 cm, combined hydraulic movements, and compact dimensions, the MT 625 e is a true all-terrain machine, also suitable for work at compact, low-emission jobsites such as city centers or indoor facilities. Equipped with lithium-ion batteries and an integrated charger, you can add an additional battery and charger to increase on-site autonomy and accelerate charging. 3rd valve, rear work lights, front work lights, heater, full cab, air conditioning,

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Fgjdozgpbbopfx Ahped Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovation work on low-rise buildings. The compact machine, 1.80 m wide and less than 2 m high, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy maneuverability. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine hood. The 90-liter gear pump enables simultaneous movements of the boom and the telescope, thus increasing productivity. 3rd valve, full cab, CE certificate.

Condition: new, functionality: fully functional, machine/vehicle number: HR15272, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 56 kW (76.14 HP), fork length: 1,200 mm, empty load weight: 4,800 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,810 mm, Telescopic handler, rigid frame Chassis number: HR15272 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Fgodszf Tfhjpfx Ahpod Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Pneumatic Front tire size: CAMSO SKS532 1216.5 145A2 Front tire condition: New Rear tire type: Pneumatic Rear tire size: CAMSO SKS532 1216.5 145A2 Rear tire condition: New Battery voltage: 12V Battery capacity: 110Ah Battery type: Starter Battery year of manufacture: 2026 Battery condition: New Description: Machine completely workshop-tested, UVV and inspection newly approved! Rear work light, front work light, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, LED, seat, Fork carriage with load guard (PFB), forks 125 x 45 x 1,200 mm (FEM 2), Camso SKS532 tires 12-16.5, interior rearview mirror, rear-mounted mirror, radio antenna, radio preparation, auxiliary hydraulics, deactivation of tilt function, LED work lights front and rear, sun visors on the roof and windshield, roof windshield wiper, high-performance starter battery 12V / 110 Ah / 900 A, power cable 95 mm², protection for lubrication points, Easy Link System, CE machine approval and ABE (German operating permit) for Germany, TÜV version (German technical inspection) 20 km/h.

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 140 l, lifting height: 17,550 mm, Year of construction: 2023, operating hours: 2,630 h, Equipment: air conditioning, Empty weight: 11.700 kg Fgedpszkaxlefx Ahpjd Carrying capacity: 4.000 kg GVW: 15.700 kg Dimensions (LxBxH): 627 x 242 x 250 cm Engine type: Deutz Deutz 854E-E34TA

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1840 easy Comfort Telehandler 18m 4t The MT 1840 Easy telehandler was designed for construction sites requiring substantial lifting heights. With a lifting capacity of 4 t, it enables safe pallet placement at heights of up to 17.55 m. This robust machine features a sheet metal-clad low door and an electric window to minimize the risk of breakage. The cabin provides excellent visibility, allowing the operator to constantly monitor site activities and track the load to its destination. Thanks to multiple lashing points, the MT 1840 can be easily transported from one site to another and, with 37 cm ground clearance, 3 steering modes, and 4-wheel drive, it adapts to any terrain. Max. load capacity: 4,000 kg Max. lifting height: 17.55 m Max. outreach: 13.08 m Breakout force with bucket: 7,400 daN Overall length with fork carriage: 6.15 m Length to front of forks: 6.27 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cabin width: 0.89 m Tilt angle upwards: 16° Tilt angle downwards: 110° Turning radius (over wheels): 3.94 m Own weight (with fork): 11,710 kg Weight: 11,710 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3,621 cm³ Engine performance (HP/kW): 75 HP / 55.40 kW Max. torque / engine speed: 340 Nm @ 1,600 rpm Tractive force: 8,320 daN Transmission: torque converter Number of gears (forward / reverse): 4 / 4 Max. travel speed: 20 km/h Automatic parking brake, oil-immersed multi-disc brakes on front and rear axles Hydraulic pump type: gear pump Hydraulic flow rate/pressure: 106 l/min - 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front / rear): 2 / 2 Drive wheels (front / rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R64 WhatsApp support available! If you have any questions regarding the vehicle or require further information, feel free to contact us via WhatsApp. WhatsApp WhatsApp Fjdpfx Asxmqwqohpjgd

Condition: new, Year of construction: 2025, Equipment: all wheel drive, soot filter, Manitou MT625 H Comfort 75K ST5 S1 Telehandler 2.5t 6m The MT 625 H telehandler is designed for construction site applications in new building projects as well as renovation work on low-rise structures. This compact machine, just 1.80 m wide and under 2 m in height, easily fits through doorways and can navigate congested job sites with ease. Its turning radius of 3.30 m and three steering modes ensure outstanding maneuverability. The telehandler is user-friendly, equipped with an ergonomic dashboard and the JSM joystick for precise and simple operation. The MT 625 H offers a lifting capacity of 2.5 t and a maximum lift height of 5.85 m. Its 75 hp engine provides a top speed of 25 km/h. Maintenance tasks are simplified by the wide engine bonnet opening. The high-capacity 90-l gear pump enables simultaneous movement of the boom and telescope, enhancing productivity. Max. load capacity: 2,500 kg Max. lift height: 5.85 m Max. reach: 3.40 m Breakout force with bucket: 3,427 daN Overall length with fork carriage: 3.83 m Length to front of forks: 3.90 m Overall width: 1.81 m Overall height: 1.92 m Wheelbase: 2.30 m Ground clearance: 0.33 m Cabin width: 0.79 m Upward tilt angle: 12° Downward tilt angle: 117° Turning radius (over tyres): 3.31 m Weight: 4,800 kg Tyres: SKS532 12-16.5 Engine: Kubota Stage V, Tier 4 final Engine model: V3307-CR-TE5B Number of cylinders/displacement: 4 - 3,331 cm³ Engine power (hp/kW): 75 hp / 55.40 kW Fgedpfxjxmqt Eo Ahpjd Max. torque / engine speed: 265 Nm @ 1,400 rpm Tractive force: 3,550 daN Transmission type: Hydrostatic Number of gears (forward/reverse): 2 / 2 Max. travel speed: 20 km/h Automatic negative parking brake Parking brake: oil-immersed disc brakes on front axle Hydraulic pump type: gear pump Hydraulic flow/pressure: 90 l/min - 235 bar Hydraulic oil capacity: 115 l Fuel tank capacity: 63 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R122 WhatsApp support available! If you have any questions about the vehicle or would like more information, feel free to message us on WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Equipment: all wheel drive, soot filter, Manitou MT1440 ST5 Easy Comfort Telehandler rigid 4t 14m The MT 1440 Easy telehandler is designed for construction sites requiring high lifting heights. With a lifting capacity of 4 tonnes, it enables safe placement of pallets at heights of up to 14 meters. This robust machine is equipped with a sheet metal-clad low door and an electric window to minimize breakage risks. The cab offers excellent visibility for the operator to continuously monitor site operations and track the load to its set-down point. The MT 1440 can be easily transported between job sites thanks to numerous lashing points, and adapts to any terrain with 42 cm ground clearance, 3 steering modes, and 4-wheel drive. Maximum load capacity: 4000 kg Maximum lifting height: 13.53 m Maximum outreach: 9.46 m Breakout force with bucket: 7400 daN Overall length with carriage: 6.02 m Length to fork face: 6.13 m Overall width: 2.36 m Overall height: 2.45 m Wheelbase: 3.07 m Ground clearance: 0.37 m Cab width: 0.89 m Tilt angle up: 12° Tilt angle down: 114° Turning radius (over tires): 3.94 m Own weight (with forks): 10,855 kg Weight: 10,900 kg Tyres: 400/80 - 24 - 162A8 Engine: Deutz Stage V, Tier 4 final TD 3.6 L Cylinders: 4 - 3621 cm³ Engine power (hp/kW): 75 hp / 55.40 kW Max. torque / engine speed: 340 Nm @ 1600 rpm Tractive force: 8,320 daN Transmission: torque converter Fedpfx Ahoxmqw Repjgd Number of gears (forward/reverse): 4 / 4 max. Maximum travel speed: 20 km/h Automatic parking brake Oil-immersed disc brakes on front and rear axles Hydraulic pump type: gear pump Hydraulic flow rate / pressure: 106 l/min - 270 bar Hydraulic oil capacity: 135 l Fuel tank capacity: 140 l Steering wheels (front/rear): 2 / 2 Drive wheels (front/rear): 2 / 2 Errors and prior sale excepted. Internal vehicle number: R63 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 9,000 mm, Year of construction: 2025, operating hours: 5 h, Number of cylinders: 4 Empty weight: 7.480 kg Fjdpfsyupiijx Ahpsgd Dimensions (LxBxH): 478 x 227 x 248 cm Engine type: Deutz TCD 2.9 L4 Lifting capacity: 3.500 kg Maximum reach: 640 cm General condition: very good Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final Condition CE type: CE New Manitou MT935, 11/2025 - model year 2026, Comfort version, work lights on cab

Condition: used, fuel type: diesel, fuel tank capacity: 120 l, color: red, lifting height: 6,900 mm, Year of construction: 2022, operating hours: 2,190 h, Equipment: air conditioning, Empty weight: 6.850 kg Carrying capacity: 3.300 kg GVW: 10.150 kg Dimensions (LxBxH): 474 x 233 x 230 cm Boom radius: 3.9 m Manufacturing country: France = Additional options and accessories = Fsdpoydl Sfefx Ahpegd - Pallet fork

Condition: new, functionality: fully functional, machine/vehicle number: HR15003, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 8,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,990 mm, power: 55 kW (74.78 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 6,550 kg, total length: 4,670 mm, drive type: Diesel, construction width: 1,990 mm, Rigid Telehandler VIN: HR15003 Load center: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Hydrostatic Fsdpfxewlw Eus Ahpogd Condition: New Technical condition: New Front tires type: Solid rubber Front tires size: ALLIANCE 380/75 R20 148A8 A580 Front tires condition: New Rear tires type: Solid rubber Rear tires size: ALLIANCE 380/75 R20 148A8 A580 Rear tires condition: New Description: 12-month factory warranty / Max. 2,000 operating hours Rear work lights, front work lights, road traffic regulations, full cab, CE certificate, interior mirror, exterior mirror, joystick Windshield wipers, LED, seat, Additional hydraulic function, roof wiper, sun visor on the windshield and roof, quick-release device, engine oil, wheel chocks, TÜV preparation, 20 km/h

Condition: new, functionality: fully functional, machine/vehicle number: HR14851, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,480 mm, power: 55 kW (74.78 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 7,480 kg, total length: 4,780 mm, drive type: Diesel, construction width: 2,270 mm, Telescopic forklift rigid Chassis number: HR14851 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Telescopic Gearbox: Torque converter Condition: New device Technical condition: New Fsdpfxoyv Syne Ahpjgd Front tires size: APOLLO FX525 40080R24 162A8 Front tires condition: New Rear tires size: APOLLO FX525 40080R24 162A8 Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours Rear work lights, front work lights, STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, windshield wiper, seat, Additional handle in the cabin Height-adjustable steering column Car radio pre-installed Tilt lock License plate light at the rear Road lighting Pack Comfort Side window wiper with washer Reversible fan Wheel chocks Speed 20 km/h TÜV preparation Additional hydraulic function FORK CARRIER PFB 35N 1260 FORK TINES 125X 45X1200 FEM 3A

Condition: used, machine/vehicle number: 948492, Year of construction: 2015, Field of application: Freight transport Empty weight: 475 kg Lifting capacity: 2.200 kg Fsdpfx Ajwaqv Njhpegd Please contact Team DPX for more information

Condition: used, fuel type: diesel, color: red, lifting height: 5,850 mm, mast type: telescopic, Year of construction: 2019, operating hours: 4,920 h, Equipment: air conditioning, Empty weight: 4.922 kg Carrying capacity: 2.500 kg Fgodpezb Nazjfx Ahpjd GVW: 7.422 kg Dimensions (LxBxH): 390 x 181 x 192 cm Working height: 600 cm Boom radius: 3.4 m

Condition: used, fuel type: diesel, lifting height: 5,850 mm, Year of construction: 2019, operating hours: 4,430 h, Equipment: air conditioning, Year of manufacture: 2019 Fodpfx Aoy Nwxpohpegd Empty weight: 4.922 kg Carrying capacity: 2.500 kg GVW: 7.422 kg Dimensions (LxBxH): 390 x 181 x 192 cm Working height: 600 cm Boom radius: 3.4 m

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,700 h, machine/vehicle number: 969755, load capacity: 230 kg, empty load weight: 8,100 kg, construction height: 2,370 mm, fuel type: diesel, drive type: Diesel, arm reach: 10,600 mm, working height: 17,650 mm, Articulated telescopic boom lift Chassis number: 969755 Condition: Ready for use and fully functional Technical condition: very good Fsdpfxozb R Tpo Ahpjgd Front tire type: Air Front tire condition: 80 - 100% Rear tire type: Air Rear tire condition: 80 - 100% Description: Continuous rotation, oscillating axle, differential lock, crab steering, dead man's pedal.

Condition: used, functionality: unexamined, Year of construction: 2019, operating hours: 2,356 h, load capacity: 3,200 kg, fuel type: diesel, construction height: 2,300 mm, empty load weight: 7,640 kg, total length: 4,710 mm, drive type: Diesel, construction width: 2,260 mm, Rigid telehandler Fgedpfozctk Hox Ahped Technical condition: Normal

Condition: used, power: 73 kW (99.25 HP), lifting height: 13,000 mm, Year of construction: 2016, operating hours: 2,293 h, load capacity: 3,499 kg, Equipment: cabin, Manitou MT1335 Year of manufacture: 2016 Approx. 2,293 operating hours 100 hp 3 control circuits 3 steering modes – front-wheel steering, crab steering, all-wheel drive Lifting height: 13 m Load capacity: 3.5 tons Price: €37,900.00 net Fgsdoy Tz D Rjpfx Ahpjd Available at an additional cost: Earth bucket: €1,490.00 net Light material bucket, 2 m³: €2,100.00 net Light material bucket, 2.7 m³: €2,150.00 net Light material bucket with double wear strip (reversible blade), 2 m³: €2,250.00 net Light material bucket with double wear strip (reversible blade), 2.7 m³: €2,450.00 net Small work platform for JCB or Manitou, Claas, Merlo, 1.2 m wide: €990.00 net Large work platform, 2 m wide: €1,550.00 net Inspection possible at any time by prior telephone appointment. All information is subject to change without notice.

Condition: used, lifting height: 8,000 mm, Year of construction: 2018, operating hours: 2,886 h, load capacity: 3,200 kg, Equipment: cabin, Manitou MT932 Fedpfx Ahjy Tz Dqspsgd Year of manufacture: 2018 2,886 operating hours 3 control circuits 3 steering modes – front-wheel steering, crab steering, all-wheel steering Lifting height: 9 m Load capacity: 3.2 tons Price: €36,900.00 net Available at an extra cost: Earth bucket: €1,490.00 net Light goods bucket, 2 m³: €1,950.00 net Light goods bucket, 2.7 m³: €2,150.00 net Light goods bucket with double wear strip (reversible cutting edge), 2 m³: €2,250.00 net Light goods bucket with double wear strip (reversible cutting edge), 2.7 m³: €2,450.00 net Small work platform for JCB or Manitou, Claas, Merlo, 1.2 m wide: €990.00 net Large work platform, 2 m wide: €1,550.00 net Inspection possible at any time, by prior telephone appointment. All information is subject to change without notice.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 470 h, load capacity: 3,000 kg, lifting height: 8,850 mm, fuel type: diesel, construction height: 1,990 mm, empty load weight: 6,650 kg, total length: 4,664 mm, drive type: Diesel, construction width: 1,990 mm, Telescopic forklift, rigid Speed class: 25 Technical condition: good Battery condition: good Fjdpow Egv Nefx Ahpjgd Description: The Manitou MT 930 is a compact and versatile telescopic handler for construction sites, agriculture, and material transport in confined spaces. With a lifting height of up to 8.85 m, a lifting capacity of 3,000 kg, and permanent all-wheel drive, the machine is ideally suited for lifting and loading tasks even on uneven terrain and in tight spaces. Compact design. High maneuverability and off-road capability. Ideal for construction sites, agriculture, and material transport. Robust and easy to operate. Further information and a non-binding inquiry can be found on our website - Safe working at any height. In addition to this machine, we offer other aerial work platforms and telescopic handlers for rent and sale. Our machines are regularly serviced and inspected. Rental, sales, service & repair. With us, you get everything from a single source. Lease-purchase, financing, and the purchase of used machines are also possible. Our team will be happy to provide you with competent and personal advice.