Used Manual Bending Machine Pan for sale (75,372)

Condition: used, = Additional options and accessories = - 1 fuel tank - Day Cabin - Thick Axles = More information = General information Year of manufacture: May 1990 Year of construction: 1990 Operating hours: 66.819 Cab: day Drivetrain Type of fuel: Diesel Transmission Transmission: Automatic Axle configuration Tyre profile: 50% Front axle: Differential lock; Steering; Reduction: hub reduction Rear axle 1: Double wheels; Differential lock; Reduction: hub reduction Rear axle 2: Double wheels; Differential lock; Reduction: hub reduction Measures Length: 12 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Rodpfxo Adty Hs Abujch Visual appearance: average

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Rjdpfowmdw Hjx Abuech Wire grooves 8/12/15mm Price excluding VAT

Condition: used, plate width 1020 mm Rsdpfxez N Hwqe Abujch plate thickness 4 mm diameter of upper rolls 110 mm total power requirement 2,2 kW weight of the machine ca. 900 Kg dimensions of the machine ca. 2,1 x 0,7 x 1,2 m Fasti three-roll plate bending machine / plate rolling machine In excellent condition. The machine was completely overhauled in 2016.

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement. Rcodpfx Abs Ad Nq Ueujh

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) Rcjdpfxjxacfgs Abueh * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm - Roller diameter 90 mm Rsdpfxjq H D S Rs Abuech - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Condition: used, pneumatic press, 60 kN pressing force at a maximum of 5 bar Stroke: max. 315 mm Weight: 150 kg Rsdpfx Ae Aazqxebuoch

Condition: excellent (used), Year of construction: 2005, Technical specifications: Working length: 3100 mm Max. bending capacity: 20.0 mm Bending allowance: 15.0 mm CNC control: SIEMENS Simatic Diameter of all rollers: 350 mm Rodpfo Afby Rsx Abuoch Hydraulic folding bearing Control panel with digital display Motor power: 15 kW CE marking Dimensions (length x width x height): approx. 6900 x 2000 x 2450 mm Weight: approx. 21 tons Accessories: Bending aid at the top and on the side The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Rsdpfx Asz D Suvobuoch Used PICOT rolling machine Year: 2019 Type: RCS235-30 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Rodpfx Aezcuzysbusch Heidelberg Plattenabkante // Platebender, Year: 2008 equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: new, number of rollers: 3, shaft diameter: 50 mm, - Shaft diameter 50 mm - Top roller is moved hydraulically - Digital display - Can be used horizontally/vertically - Foot control - Emergency stop Rjdpfx Absr Ar Hveujch - Documentation - 400 V

Condition: used, Year of construction: 1990, Technical details: tube diameter: 42 mm wall strength: 25 mm round bar steel: max. Ø 20 mm square material: Rohr 25 x 25 mm bending radius max.: innen max: Ø 20 und außen max: Ø 170 mm bending speed: keine Angaben °/s tube pipe draw up length: 3000 mm control: Software RC 7000 weight of the machine ca.: 2,8 t dimensions electric cabinet: 800 x 700 x 2000 mm dimension machine xH: 5,1 x 0,7 x 2,0 m Redpfxsu Ibvue Abujch Application: Machining of deformable tubes, rectangular tubes and round bars and square tubes. Description of the software RC7000, programming manual rectangular tube 42 x 20 x 2,5mm bending direction to the left Operation via control panel with monitor Accessories: -div. bending tools for tube Ø 25mm -12 div. collets -div. auxiliary and clamping devices *

Condition: new, Year of construction: 2009, 30 mm Rodov Skzdspfx Abujch 30 mm L-beam 20 x 20 x 4 mm flat steel 25 x 6 mm Axis diameter 20 mm work speed 11 U/min total power requirement 0,2 kW weight of the machine ca. 80 Kg dimensions of the machine ca. 0,6 x 0,6 x 1,5 m Profile bending machine with: - Foot pedal for right/left rotation - Digital display - 1 set of standard rollers - 3 rollers are driven - Horizontal or vertical operation

Condition: as good as new (ex-display), Year of construction: 2026, Hydraulic horizontal bending machine - Model T 200 with stop Rcodpozzk D Tjfx Abuoh - feeding machine - stroke length 185 mm - Weight 500 kg Bending capacity up to flat bars ST 37 is 200x12 mm (with appropriate tool) with punch R 5 and die V 100 mm

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Rcedpfx Asxuf Sljbuoh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Rsdpfx Aocnxc Nobujch Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: Rjdpfx Aetr U Hlsbuech → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Rcedpfju Itlnjx Abujh Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface

Condition: as good as new (ex-display), Year of construction: 2022, 1550 mm 2,0 mm 1,5 mm roll diameter oben 90 mm 560 kg 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor Rcodpexcuxdsfx Abujh - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: as good as new (ex-display), Year of construction: 2025, Used horizontal bending machine Digibend 400 CNC with back gauge L=1250 and 22" LCD monitor with touchscreen, USB ports and integrated DigiSoft software - demonstration machine - Machine is powered on and can be inspected by appointment! Technical data: Redpfjyw Rxfsx Abujch Year of manufacture: 2025 Max. bending force: 400 KN / 40 tons Max. stroke: 245 mm Max. working speed: 9.6 mm/sec Min. working speed: 4.8 mm/sec Return speed: 62 mm/sec Average speed: 35.8 mm/sec Programmable programs / Programmable sequence bends: 50+5 (punching) Number of single bends / sequence bending: 16 Dimensions of the work table: 580 x 1230 x 925 (H) mm Tool fixing holes in the work table: 4 x Ø 80 mm Working height: 925 mm Oil tank volume: 40 l Motor power: 5.5 hp / 4 kW Connections: 380 V / 50 Hz Bending height: 200 mm Extra-high bending height: 400 mm Cutting max. capacity 40 kg/mm (mild steel): H=150 x 10 (thickness) Punching max. capacity 40 kg/mm (mild steel): Ø 30 x 10 (thickness) Straightening: 200 mm Two-die bending: Ø 60 mm Rotational bending: Ø 50 mm Automatic CNC back gauge: 1250/2000 mm Weight (approx.): 700 kg Dimensions: 580 x 1230 x 1150 mm The following tools are included in the price: - Die holder extension H. 190 L. 85 mm – for DIGIBEND 160-360-720 -- 400-800 - Center pin (multifunction pin) D. 80 – H. 220, head milled for Digibend 160-360-720 -- 200-400-800 - Bending insert R. 5 – H. 200 mm – DIGIBEND - Single V-die, 80 mm. H. 200 mm. for DIGIBEND

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Rcodpfjzzlc Rjx Abueh Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feeder Clear text display Press force monitoring Wire straightening device Bosch stripping devices Holder and brush motor with integrated tool W32/1-32 Soundproof cabin Barrel with CU wire and stamped parts Control cabinet Drive power: 7.5 kW Rcedpsg T S Ttsfx Abush Speed (min. - max.): 40-250 rpm Press force / bending slide: 80 kN Press force / punching unit: 200 kN Longitudinal feed: 2050 mm Longitudinal strip width: 50 mm Wire diameter: 6.0 mm Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description; deviations possible. You are purchasing the machine as shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racking, shelving units, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Schroeder & Bauer WB 32-1 Universal Wire and Strip Bending Machine Wire feed Clear text display Press force monitoring Wire straightening device Bosch wire stripping devices Mounting and brush motor with integrated tool W32/1-32 Soundproof cabinet Feeder for CU wire with stamped parts Control cabinet Technical data: Drive power: 7.5 kW Speed (min. - max.): 40 - 250 rpm Press force / stamping unit: 200 kN Feed length: 250 mm Strip width: 50 mm Wire diameter: 6.0 mm Rodpfog T S Tdjx Abujch Machine weight: 3500 kg Dimensions without electrical components (L x W x H): 3600 x 1500 x 2400 mm Item condition: very good Manufacturer's description, deviations possible. You purchase the machine as it is shown in the pictures. Complete factory closure, large selection of storage platforms, pallet racking, shelving, and paternoster lifts. High-quality industrial machines, lathes, grinding machines, and hand tools. More stamping and bending machines - new and used - can be found in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2025, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter: 30 mm - Rotates both clockwise and counterclockwise - Usable horizontally and vertically - Foot operation Rsdpfx Ajxgb A Dsbuoch - Emergency stop - Documentation - 400 V

Condition: new, shaft diameter: 50 mm, – Shaft diameter 50 mm – Upper roller hydraulically adjustable – Digital display – Can be used horizontally/vertically – Foot-operated control – Emergency stop – Documentation – 400V Rcodpfx Aoz Ai R Iebujh