Used Manure Spreader for sale (534)

Condition: used, Year of construction: 2024, 710/50R26.5 Alliance 885 Double-sided, wide-angle GW size 6 / compost attachment 400 mm Surcharge 3rd ripper roller screw-on tines for 3 ripper / rollers Hydraulic undercarriage Bottom hitch with ball head drawbar / scraper bars for lime sideboard coupling Fedpfjrxuqzsx Aanegi

Year of construction: 2013, condition: excellent (used), Device for separating clusters of green beans, little used device Fodpfx Aowz I Tueansgi

Condition: used, Year of construction: 2025, _____Year of manufacture: 2025 Engine capacity: 1500 cc Tank capacity: 14,000 liters Pump capacity: 4000 liters Suction inlet: right/left Suction arm: right Tires: 750/60R 30.5 Hydraulic drawbar adjustment Front cutter Electric forced steering Automatic filling system with shut-off function Fgodpfxszxvnls Aansi Signo Smart control system Bomech with two cutters 6-inch suction arm with 8-inch ball Half-width control via slide valve Bomech spreading shoe distributor Speedy Small 12 M (optional 15 meters) Vehicle not registered Like new Storage location: Getränkemarkt-Platz

Condition: used, Year of construction: 2022, _____Pump Tank Trailer KTR 18.5 Tandem, Professional Equipment: Year of Manufacture: 2022 Approx. 32,000 m³ capacity 24 tons permissible total weight Fenders Lower hitch, 4-ton support load K80 Drawbar, hydraulically height-adjustable All suction lines, except for slide valves and quick couplings, are 8" Vogelsang 6000 l rotary lobe pump with injection system, Changeable impellers and reduction gearbox Suction on the left side, 6" with quick coupling and stone trap All slide valves as pneumatic slide valves / stainless steel blade (clog-free) Automatic filling shut-off Preparation for cutter and suction arm Preparation for trailing shoe Hose rack for suction hoses Single-sided wide-angle universal joint with overload protection Tires 750/60 R 30.5 TÜV approval, 40 km/h 2 LED work lights LED lighting system Preparation for lifting device Special equipment: (1124-B) Kumm-Profi-Pad 7" touchscreen operation Application rate display Individual button assignment for the respective hydraulic functions, such as lowering/raising boom, adjusting boom, connecting arm, pre-set program for Bomech trailing shoe One press of a button and the stored function runs in sequence! (1124-C) Application rate regulation Automatic application rate regulation depending on driving speed, controlled via Kumm-Pad (1124-D) Vogelsang rotary lobe pump 6,000 liters with injection system and changeable impellers (1124-E) Tires 750/60 R 30.5, standard (1124-F) Two-chamber system, standard Two-chamber system as standard. Emptying: First at the rear, then at the front. (1124-G) Air suspension with lifting/lowering valve, standard (1124-H) BPW trailing steering axle, hydraulically lockable (1124-I) Fenders, standard Fgedpez Dmaajfx Aansi Extremely large wheel cut-outs for a very low center of gravity and the greatest possible steering angle (1124-J) Lower hitch K 80, 4.00 tons support load, standard (1124-K) Hydraulic support leg, standard (1124-L) Drawbar, hydraulically height-adjustable and sprung, standard (1124-M) All suction lines, except for slide valves and quick couplings, are 8", standard (1124-N) Suction nozzle at the front left with pn. plate slide valve and 6" quick-release coupling (1124-O) Automatic filling shut-off (1124-P) Preparation for cutter and suction arm (1124-R) Preparation for tire pressure control system Preparation for the installation of a tire pressure control system, standard! BPW axles pre-drilled! (1124-Q) Preparation for trailing shoe and trailing hose booms (1124-S) Preparation for suction boom above Preparation for the installation of a suction boom above the vehicle, standard. Connection for front pump station, standard (1124-T) Walterscheid universal joint Walterscheid universal joint, single-sided wide-angle (1124-U) Blow-out function Possibility of emptying the entire boom system by means of compressed air (1124-V) LED lighting Rear lights completely LED. Turn signals with dynamic indicator (similar to "Audi" turn signals) (1124-W) Preparation for lifting device Possibility of installing a lifting device with 3/4-point mounting (1124-ZA) Forced steering, electric Forced steering, electro-hydraulic, suitable for KTR tandem vehicles (1124-ZB) Axle load relief Axle load relief at the touch of a button (to increase the support load, the front axle is relieved) (1125-J) Cutter for KTR Cutter Vogelsang Rotacut 10,000 Suction arm KTR, single-jointed Suction arm 8", single-jointed with slide valve, ventilation, Pressure limitation, incl. operation from

Condition: used, Year of construction: 2016, _____For sale on behalf of a customer: Kaweco Profi 2. 20 VCB, year of manufacture 2016, suction arm on the right, forced steering, tires 750/60 R30.5, telescopic axle, hydraulic suspension, hydraulic drawbar suspension, air pressure plus hydraulic brakes, ball hitch, load sensing (but not Isobus), vacuum pump 13500 liters, 3-point hydraulics, 7.20 meter Opti-Ject slot seeder. Price: 55,000.00 euros net, storage location: null. Fgedpfx Ajzpcvkjanji

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Fgedjzpgrispfx Aanji

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, working width: 1,800 mm, cutting height (max.): 30 mm, compressed air connection: 10 bar, An exceptional opportunity to acquire a fully integrated, high-performance automated multi-ply CNC cutting solution. Commissioned in August 2023 and kept in excellent condition, this complete VetiGraph / Serkon Makina setup is available for immediate purchase. Full UK delivery, professional decommissioning, transport, and complete onsite re-commissioning are all included to get your facility running quickly and smoothly. Get a complete factory upgrade at a fraction of the cost of new equipment. Package includes: * Serkon MC30 Multi-Ply CNC Cutter: 30mm compressed cutting height, 180cm width, continuous conveyor, drill and vortex knife cooling. * MN1 Fabric Spreader & ML2 Roll Lift: Automatic tension-free laying with a 9m x 2m air-flotation table. * Complete CAD/CAM Suite: Includes VetiGraph Pattern Design, Automated Marker Nesting, and FastJet Twin-Head Plotter. * iDigit Photo Digitiser: Quickly converts physical patterns to vector files. Full Turnkey Package: Includes UK delivery, complete installation, fully setup commissioning, 7 days of total onsite training, and a 6-month warranty. Avoid long manufacturer lead times and substantial capital outlay. This complete system is ready for immediate inspection in Preston and fast deployment to your facility. Fgsdpfxsz A D Ryo Aanoi Delivery & Installation: * For deliveries outside the UK, the machine is supplied on an Ex Works (EXW) basis. The buyer is responsible for arranging and covering the cost of international transport, import duties, taxes and any local delivery charges. * Installation and commissioning can be provided by our engineers at an additional cost. For overseas installations, additional charges will apply to cover engineer travel, accommodation and associated expenses. * Please contact us for a quotation for installation and commissioning to your location.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed Fgsdpfx Aajzmyvionoi • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: repair required (used), Year of construction: 2025, functionality: limited functionality, machine/vehicle number: 24163 / 24191, Bakery Machines For sale as: used and partially damaged/contaminated – no warranty, no guarantees, sold as is, “as is, where is” Fgjdpfxo Afmqhe Aanji Depositor + accessories & topping applicator + cleaning cart Manufacturer: bmTEC Machine specifications: see downloadable PDF Condition: used/damaged, in operation from early 2025 to early 2026 Damage to the “Depositor”: Only the “Depositor” is mechanically damaged. During loading, the “Depositor” tipped over to the side and fell to the floor. The frame of the “Depositor” is bent. The gap dimensions vary considerably. Inside, residues from rodents and dirt are visible due to storage. In the area of the product inlet, a compression of the frame can be seen. One of the conveyor belts shows no tension. Inside one of the installed control cabinets, a plastic cover and a screw are lying loose. The “Topping Applicator”, which is controlled via the “Depositor” and the control cabinet installed there, shows no visible defects other than the usual signs of wear. However, soiling is also visible here. No visible irregularities can be seen on the sheets belonging to the machine and on the cleaning cart. Sales basis: loaded onto a truck at the location 83562 Rechtmehring

Condition: used, Year of construction: 2011, General overhaul 200 hours ago at Holmer Mercedes V8 engine with 598 hp / PowerShift transmission 18v/6r 5.70 long intake arm Xenon headlights Air conditioning / Trimble track guidance / Fgjder Ty Nwjpfx Aansi

Year of construction: 2001, condition: used, functionality: unexamined, machine/vehicle number: BFP-007, We are offering this used Sernagiotto BFP 2000I belt press from 2001 for sale. Multiple units are available. The machine can be used for dewatering sludge from washing processes, for example, in soil remediation/washing of agricultural products or in manure processing. The frame is galvanized, and the press is suitable for heavy, inert sludge fractions. Machine: SEM Model: 2000 I Serial number: 60405715010001 Year of manufacture: 2001 Fodpj Agrcrofx Aansgi Installed power: 7.75 kW Supply voltage: 400 V Frequency: 50 Hz Number of phases: 3 Empty weight: 10500 kg Operating weight: 11500 kg Belt width: 2100 mm Equipped with a mixing tank with agitator for polymer dosing. Various machines are available. All technical information is available, as well as spare parts. The machines come directly from the site, have been partially disassembled for transport, and can be prepared for use by us if desired. We also have 2 used polymer preparation stations available, if desired. These still need to be fitted with control systems. Viewings are by appointment only. Further information and photos are available upon request. The exact scope of delivery will be determined at the time of sale.

Condition: used, Year of construction: 2023, working width: 9 mm, Equipment: compressed air brake,

Condition: ready for operation (used), Year of construction: 2025, overall weight: 540 kg, total length: 3,000 mm, load capacity: 35,000 kg, 35-ton spreader beam (3 pieces) 3 pieces, 35 tons. In very good condition. Fgjdpfx Aaj Aig Nqsnsi Complete with rack. Year of manufacture: 2025 Distance from lifting eye to lifting eye: 3,000 mm Fixed price: €2,750 for 3 pieces with rack.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, OSAMA: IDEALTECH HEATED ROLLER MACHINE MODEL HOTMASTER, GLUE MELTER AND ROLLER PRESS The line includes: 1 feeding conveyor with a COSMA cleaning brush 1 IDEALTECH GLUE MELTER 1 OSAMA GLUE APPLYING MACHINE 1 OSAMA central conveyor 1 press (6 pressing rollers, 3+3) 1 COSMA discharge conveyor Metering and application rollers with resistors/oil heating system of 8 kW x 2 - No. 03 motors at the end of the application and metering rollers, independently controlled - Adjustable speed via no. 03 electric frequency regulators with an automatic "reverse" rotation system for the rollers to clean the machine at the end of the work cycle - Heating system with thermal oil and electric resistors - Automatic/motorized lifting of the upper rollers with digital position display Fedpfx Aaez Ng Agenjgi - Top applicator 3 kW + bottom applicator 3 kW + top metering device 0.75 kW - Part movement control 0.55 kW - Lifting torque of the top rollers 0.18 kW - No. 02 motorized steel rollers at the machine inlet - No. 02 motorized steel rollers at the machine outlet - Stainless steel tray for machine cleaning - The machine is programmable to heat the rollers automatically without any control or operator intervention - Machine ready for the application of glue guns for the application of PUR glue, without glue guns - Machine ready for integration into a production line * No. 01 tube for PUR glue fume extraction, 145 mm diameter. HIGH-TECH AUTOMATIC 6-ROLLER PRESS MODEL CLR/6-1300 STANDARD CE, VOLTAGE 400/50 3PH Complete machine consisting of: - Inverter speed variator motor - Independent pressure adjustment system for each pair of rollers, with a shared pressure sensor display between the main pressing rollers and the secondary drive rollers - Reinforced structure for high working pressure No. 02 + 02 (four) rubber pressing rollers, Shore hardness 90 +- 5 Shore No. 02 (two) rollers positioned in the middle, made of chrome steel Roller diameter: 300 mm Useful working width: 1300 mm Minimum/maximum working height: 0-100 mm Video available upon request.

Condition: used, Year of construction: 2023, with ball head K80 for 3to drawbar load Wheel arches per axle for plastic / fabric mudguards Air suspension Agroturn, 2,225mm Preparation for forced steering / ventilation Air bellows on first axle Tandem eccentric worm-drive pump type Wangen / BOMECH towing shoe Fodpfot Dnuuex Aanogi

Condition: used, maximum load weight: 32,580 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2026, next inspection (TÜV): 02/2027, loading space volume: 30 m³, total length: 9,850 mm, total width: 2,550 mm, total height: 3,785 mm, Year of construction: 2026, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final confirmation, errors and omissions excepted, and subject to prior sale: Jansky Schwarte manure spreader with accident damage (Vehicle 19) DA Tanker Type TSA Schwarte Group Permissible total weight 39,000 kg Unladen weight 6,420 kg Payload 32,580 kg Overall length 9,850 mm x overall width 2,550 mm x overall height 3,785 mm 9-ton axles SAF disc brakes 1 lifting axle Aluminum rims ALCOA Dura Bright Tires 385/65R22.5, approx. 80% remaining Trailing-arm steering Air suspension with lifting and lowering function 2 x wheel chocks Telescopic supports Pro Dom filling dome 30,000-liter stainless steel tank 1 compartment with 2 bulkheads, division 10,000/10,000/10,000 liters Round tank, approx. 9,000 mm long, 6 tank saddles Hose tray 6,000 mm on the right and left Rotary lobe pump Börger, Type FL1036 MIP, 6 m3/min Tank shut-off + overfill protection Top suction DN250 incl. pneumatic slide valve with docking funnel DN250, control with POTI control Docking funnel DN 200 at the rear through the tank floor Pneumatic slide valves Swivel arm hand valve 1 dome cover 500 mm diameter Automatic tank shut-off with overflow protection Tank vent according to DN125 1 x vacuum safety valve DN100 +, 1 x brass overpressure safety valve DN65 Catch basin approx. 150 L in front of the 1st axle Free outlet in DN200, is horizontally led outwards through the tank floor in the lower area Rinsing line in DN150 is mounted along the entire tank length and has 1 outlet in front of each bulkhead and one in front of the front wall Sight glasses: 1 x right-hand sight glass on the tank floor in the upper area with lighting, 1 x rectangular sight glass on the tank floor in the lower area Both sight glasses are equipped with a rinsing and cleaning nozzle 1 x aluminum ladder for hanging into the tank Fgjde Agqglspfx Aanoi Price: € 58,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. Place of jurisdiction for both parties for disputes up to a value of € 10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors and omissions excepted, subject to prior sale.

Condition: good (used), Year of construction: 1983, functionality: fully functional, THOROUGHLY CLEANED AND REPAINTED MACHINE Working width 1,300 mm Roller diameter 149 mm Feed rate 22 m/min Fgedpfezxr Uhox Aanji Max. pass height approx. 100 mm Mobile version with 2 rollers on the rear machine frame Connection data: 400 V, 50 Hz, 3-phase, N

Condition: used, Year of construction: 2023, Suction hose Perrot system, Ø150 mm, 5m Jurop vacuum compressor PNR 155 (15,200 / ltr) Plastic mudguard for Ber. Profi filling aid NW 200 front / swivel element rear Wedge flange slider 6 inch VL Wedge flange slider 6 inch / VR Bracket for Fgodpfxsr T Rfrs Aanei

Condition: used, total length: 1,000 mm, total width: 400 mm, total height: 1,100 mm, Year of manufacture: 2020 Colour: White Empty weight: 100 kg - Year: 2020 - CE marking present: Yes Fgodpfx Aaj Aayddsnei - Serial number: 200120 - Max. working width [mm]: 450 - Max. work thickness [mm]: 30 - Voltage [V]: 240 - Fuse [A]: 16 - Power [kW]: 0.3 - Transport dimensions: 1000mm x 400mm x 1100mm (l x w x h) - Transport weight [kg]: 100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2024, Wedge flange gate valve 6'' VL with back Wedge flange gate valve 6'' VR with / back Blind cover galvanized, for quick coupler 6' Bracket for suction nozzle / VR 1 swivel joint Docking device NW200 rear top for TAV tank size / 25.250l Bereifu Fedpfx Ajtt A Umoanegi

Condition: used, Year of construction: 2024, Tank Intake manifold with quick coupler left + right Swivel element with / intake manifold rear Suction arm preparation RAL 7016 anthracite gray TÜV certificate / 40 km/h Underride guard with illumination! SPECIAL PRICE LASER SALE!!! / Plexiglas cover Fedpfsr E Avwjx Aanegi

Condition: ready for operation (used), functionality: fully functional, Used lifting beam / spreader beam for rescue crane, length 2100 mm, beam width 60 mm. Please, no inquiries via email! Fgedps Aiqtyefx Aanei If you have any questions, please contact us by phone. Inspection and collection are only possible after prior telephone appointment! Subject to changes, prior sale, and errors.

Condition: used, operating hours: 13,853 h, lifting height: 5,000 mm, fuel type: gas, mast type: triplex, power: 55 kW (74.78 HP), General information Year of manufacture: 2017 Year of construction: 2017 Fgodpfx Aez I A Syeanei Weights Empty weight: 8.470 kg Functional Lifting capacity: 4.500 kg Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: triplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Make of engine: Kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, production capacity: 6,000 unit/h, TECHNICAL DETAILS Production capacity: 6,000 pieces/hour Dough weight range: 25–750 g Dough weight range for round and square products: 25–140 g Heading machine Number of rows: 5 / 6 Pre-fermentation unit and shaping station Belt width: 800 mm Topping station Number of topping containers: 2 Belt width: 800 mm Deposit unit Belt width: 800 mm Sheet size: 800 × 600 mm Sheet size: 800 × 1,000 mm EQUIPMENT Spreader belt between the heading machine and the pre-fermentation unit Shaping station for rolls and hot dog buns Fgsdpfs Ah Eyfsx Aansi Punching unit Cutting unit Topping station with two topping containers Deposit unit for baking sheets

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: LU21C0001, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, input current: 40 A, Brand new , never used Versa PUR Tank Melter for PUR glue application. This aggregate is stil in its original packing . The aggregate comes from close down of a factory here in Norway. Ready to be send . Please contact me for more information. Fodoz Sqppjpfx Aanegi