Used Mazak Quik Turn 10 M for sale (298)

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm Bodpfx Aijyyxlfsholi X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Bsdpfxowpufge Aiheli Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm Bodpfxjw Rm Die Aiholi ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: good (used), Year of construction: 2016, turning length: 1,585 mm, spindle motor power: 22,000 W, spindle speed (min.): 5,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 230 mm, total height: 3,100 mm, total length: 6,100 mm, total width: 3,230 mm, overall weight: 16,600 kg, Multi-tasking lathe MAZAK - Integrex i-200ST x 1500U MACH-ID 9450 Make: MAZAK Bsdpfxoyrcxlj Aihsli Type: Integrex i-200ST x 1500U Control: Smooth Mazatrol Year: 2016 5 Axis Simuteneous EIA/ISO Milling spindel with Threading Function Extra M-Code (1 pair for 2-M-Code) Preparation RMP-60 Sub spindel with C Axis any C1 + C2 Synchronisation IKZ with 70 Bar main spindel IKZ with 15 Bar on lower Revolver Knoll Filtration KF-400/2300 SMW KNCS-N-325-104 3 chuck Max. turning Ø: 658mm X-Axis: 260mm Y-Axis: 1585mm Z-Axis: 230mm B Axis: 360° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 65mm Subspindle power: 22kW ATC / revolver: 36 Speed live tools: 12000Rpm B-Axis Toolsystem: HSK-63 Positions lower revolver:9 Speed live tools: 6000Rpm Power live tools: 5,5kW Length: 6100mm Width: 3230mm Height: 3100mm Weight: 16600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, turning length: 1,585 mm, turning diameter: 760 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 630 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,585 mm, bar passage: 80 mm, Max. turning Ø: 760mm Blsdpfx Aijvgcpvohei X-axis: 630mm Y-axis: 230mm Z-Axis: 1585mm B Axis: 225° Spindle bore: 80mm Speed range: 6000Rpm B-Axis Speedranges:12000Rpm B-Axis power: 19kW Length: 7000mm Width: 2700mm Height: 2800mm Weight: 14500kg

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Blodpfxeyyxh Te Aihoi Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Technical Information for Mazak Corporation Mazak VTC-300C II: Model: Mazak VTC-300C II Machine type: Vertical CNC Machining Center Year of manufacture: 2003 Serial number: 162107 Accessories: Chip conveyor included Connected load: 28 kW Typical technical data for the Mazak VTC-300C II: Control: Mazatrol Fusion 640M / Mazatrol PC Fusion CNC Travel distances: X-axis: approx. 1,740 mm, Y-axis: approx. 760 mm, Z-axis: approx. 660 mm Table size: approx. 2,000 × 760 mm Table load capacity: up to approx. 1,400–1,500 kg Spindle taper: CAT 40 / BT40 Spindle speed: typically 10,000 rpm Main spindle power: approx. 18.5–22 kW Tool changer: 30 positions Rapid traverse: approx. 36 m/min Coolant system: included Machine weight: approx. 11,000–13,000 kg Bedpfxoy St E Rs Aihsli The machine is part of Mazak’s large VTC series and is particularly suited for: Large aluminum parts Steel machining Automotive production Fixture and series manufacturing

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : ISO40 - Spindle speeds : 12.000 [rpm] - Spindle power : 18,5 [kW] LINEAR AXES - Travels on X/Y/Z axes : 1050 / 530 / 510 [mm] - Rapid traverses rates (X/Y/Z) : 42 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 8000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 TABLE - Table dimensions : 1300 x 550 [mm] - Maximum weight upon table : 1200 [kg] - Distance table / spindle nose (min./max.) : 150 - 650 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 41.15 [kVA] WEIGHT & DIMENSIONS Blsdpfoycxudox Aihoi - Machine floor space : 2.880 x 2.950 [mm] - Machine height : 2.808 [mm] - Machine weight : 6800 [kg] MACHINE HOURS - Number of hours under power : 16317 [h] - Number of working hours : 3904 [h] EQUIPMENT - CNC : MAZATROL MATRIX NEXUS 2 - Interface : PCMCIA / RS232 - Electronic handwheel - 3 colors status lamp - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Tool probe - Workpiece probe

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK 40 - Spindle power : 12 [kW] - Spindle speeds : 12.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 510 x 510 x 460 [mm] A ROTARY AXIS - Travel : [°] - Indexing precision : 0,001 [°] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : 400 x 400 [mm] - Maximum weight upon table : 300 [kg] Bledpfx Aeuhbr Hoihji - Max. turning diameter : 500 [mm] - Max. machining height : 405 [mm] PALLET CHANGER - Pallet size : 400 X 400 [mm] - Pallets number : 2 POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kVA] WEIGHT & DIMENSIONS - Machine weight : 11500 [kg] MACHINE HOURS - Number of working hours : 32763 [h] EQUIPMENT - CNC : Mazatrol PC-Fusion 640 - Interactive programming - Supports : RS232/RJ45/PCMCIA - Rigid tapping - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor : MAYFRAN - Tool probe

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function and Top Specification. Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. work height: 500 mm Number of tool changer positions: 80 Tool holder: SK40 Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm Accessories: - Chip conveyor and tank - ICS (internal coolant supply) - Showa oil mist extraction unit - Renishaw probe The following features/options are available: - Linear scale system for X and Y axes - Tool magazine for 80 tools - Air blow unit at the workpiece - Oil mist extraction unit CRK 1500K - Coolant temperature control - Flood coolant 4.5 bar - Workpiece rinsing system - High-pressure coolant through the spindle 70 bar Blodpfx Aisx Db D Ajhji - Pressure switch for coolant supply through the spindle - Chip conveyor ejection right (Consep) - MAZAK Monitoring System B incl. Renishaw probe MP10 - Preparation for visual tool identification system - Detachable electronic handwheel - Milling spindle synchronous tapping - Tool tip inspection for 5-axis simultaneous machining - Tool radius compensation 5-axis - EIA dynamic tool compensation 2 (incl. 1) - Max. program memory 8 MB - Rapid traverse – constant tilt angle during movement - MAZACC-3D high-speed software package - Form compensation for rotary axes - Ethernet operation capability - High-precision control for finishing operations - Cylinder interpolation G07.1 - Signal light (3-color LED) - 3-jaw chuck 21" - Additional work area lighting The machine is in very good condition and can be inspected under power at its current location.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 35 kVA, torque: 168 Nm, rotational speed (max.): 18,000 rpm, number of spindles: 1, number of slots in tool magazine: 125, Equipment: chip conveyor, Additional features: - B-axis Bljdpfxszdth Ts Aihei - C-axis Included: - Chip conveyor - Coolant supply - Spindle cooling Available at an additional cost: - 2x IFS 2000 extraction units Disassembly, loading, and transport are the responsibility of the buyer. Sale is limited to within the EU.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Blsdpfxoy Txrxo Aihsi Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: PC-Fusion-CNC 640M, total height: 2,651 mm, total width: 2,825 mm, table load: 800 kg, overall weight: 6,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,915 mm, number of axes: 3, This 3-axis Mazak VTC 200 B was manufactured in 2001. It features an impressive X-axis travel of 1120 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1460 x 510 mm and a maximum table load of 800 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 200 B vertical machining centre we have for sale. Contact us for further details. • Machining capacity: • Milling (S45 JIS): 416 cm³/min • Drilling (S45 JIS): 25 mm • Tapping (S45 JIS): M24 x P3 • Table: • Size: 1460 × 510 mm • T-slots: 5 • T-slot pitch: 100 mm • T-slot width: 18 mm • Table height: 750 mm • Spindle: • Spindle nose to table: Max 690 mm / Min 180 mm • Spindle center to column: 530 mm • Spindle motor: • 10 min: 15 kW • 30 min: 11 kW • Continuous: 7.5 kW • Max torque: 98 Nm • Rapid traverse: • X: 30 m/min • Z: 30 m/min • Cutting feed rate: • X: 8 m/min Bledpfxsy S Sw Se Aihji • Z: 8 m/min • Tool changer: • Tool type: CAT40 • Max tool Ø with adjacent tool: 80 mm • Max tool Ø without adjacent tool: 110 mm • Max tool length: 350 mm • Tool change time (chip-to-chip): 4.7 s • Coolant system: • Tank: 300 L • Pressure: 0.5 kg/cm² • Flow: 20 L/min • Electrical data: • Installed power: 22.7 kVA • Air supply: • Pressure: 5 kg/cm² • Consumption: 140 L/min • Standard equipment: • Full enclosure • Through spindle coolant • Automatic tool length measurement • Adaptive feed control • Tool life monitoring • Tool breakage detection • RS-232C interface • PCMCIA interface • 3.5" floppy disk reader • CE compliant machine • Side chip conveyor preparation • Note: Machine is prepared for a side chip conveyor (conveyor not included) Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece length (max.): 4,000 mm, workpiece width (max.): 655 mm, workpiece height (max.): 640 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 16 bar, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale here is a Mazak VTC 200C II including a Kitagawa rotary table (4th axis). The machine is in very good condition and immediately ready for operation. Inspection under power is possible at any time. Transport and installation can be offered upon request. Technical Data: Control: MAZATROL 640M Machine width: 2819 mm Machine height: 2870 mm Machine weight: 9100 kg Table length: 2000 mm Table width: 510 mm X-axis travel: 1660 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Equipment: - Number of tools: 30 - Spindle power: 15 kW - Spindle speed: 12,000 RPM - Through-spindle coolant 16 bar - External coolant - Renishaw measuring probe OMP60 - Kitagawa 4th axis - Automatic warm-up function Bedpfjy Ndzdex Aiholi The main spindle was replaced or renewed in 2025.

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm turning diameter over slide rest:340 mm turning length:2000 mm centre height:270 mm turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min feeds::76 travel of compound slide-rest:110 mm Bsdocxxucspfx Aiholi spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, table load: 1,200 kg, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,660 mm Travel range Y-axis: 760 mm Travel range Z-axis: 660 mm Bedpfx Aijzb D N Rjholi Table size: 760 x 2,000 mm Table load capacity max.: 1,200 kg Tool holder: SK 40 Tool changer: 2 x 24 Tool diameter max.: 80 mm Tool diameter with free adjacent slot max.: 110 mm Tool length max.: 350 mm Rapid traverse (X/Y/Z): 24 / 24 / 30 m/min MACHINE DETAILS Control system: MAZATROL M-PLUS Dimensions & Weight Space requirement: approx. 6.0 x 4.0 x 3.5 m Machine weight: approx. 8.1 t Total power requirement: 32.8 kVA The machine has been regularly serviced.

Condition: used, Year of construction: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 control MAZATROL M 1 total power requirement kW Bjdotqqk Ijpfx Aiholi weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m acc.: chip conveyor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,679 h, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of Manufacture 2018 / Commissioned 2019) You are welcome to inspect the machine in our factory while it is powered on. If you are interested, we will send you demonstration videos of the machine. The MAZAK VTC-820/30 is a powerful CNC vertical machining center for the precise and efficient machining of large workpieces. With generous travels of 3,000 mm in the X-axis, 820 mm in the Y-axis, and 720 mm in the Z-axis, the machine is particularly suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The sturdy work table, with dimensions of approximately 3,500 × 820 mm, allows for the accommodation of large workpieces. The powerful main spindle, with speeds of up to 12,000 rpm and a drive power of approximately 22 kW, ensures high cutting performance and precision. The CAT 40 (ISO 40) spindle mount ensures broad tool compatibility. The machine is equipped with a modern MAZATROL SmoothG control system, which offers intuitive operation, rapid programming, and high process reliability. The 48-tool changer enables flexible and efficient machining processes, even for complex manufacturing tasks. For optimal production conditions, the machining center features coolant supply through the spindle, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers high stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that guarantees high precision, performance, and reliability in industrial manufacturing. Bjdoy S Db Ajpfx Aiholi You can rely on us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 560 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details. • Table size: 900 x 430 mm Additional equipment • On-board tool presetter • Through-spindle coolant (refrigerant inside the spindle) Bledpfxsy Ncyfo Aihji

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: 640M, total height: 2,823 mm, total width: 3,160 mm, table load: 1,500 kg, overall weight: 8,900 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,500 W, tool weight: 20,000 g, product length (max.): 3,436 mm, number of axes: 4, This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details. • Milling capacity in S45 (JIS): 634 cm³/min • Drilling capacity in S45 (JIS): 50 mm • Table Size: 1,300 mm x 550 mm • Table Configuration: 5 T-slots, 100 mm distance, 18 mm reference groove • Table Height from Floor: 800 mm • Spindle Nose to Table: 200 mm - 760 mm • Spindle Center to Column: 525 mm • Rapid Traverse (X/Y): 26 m/min • Rapid Traverse (Z): 20 m/min • Feed Rate (X/Y/Z): 8 m/min • Min Spindle Speed: 25 rpm • Max Torque: 758 Nm • Max Tool Diameter: 125 mm (adjacent occupied) / 260 mm (adjacent free) • Max Tool Length: 400 mm • Chip-to-Chip Time: 5.5 s Blsdpfx Aioy I Amvshji • Coolant Tank Capacity: 200 L • Coolant Pump Power: 0.75 kW • Connected Load (30 min/100%): 41.2 KVA / 36.2 KVA • Compressed Air Supply: 5 kg/cm², 200 L/min Additional equipment • Extraction System: Donaldson Torit DCE • Chip Conveyor: Mayfran

Condition: excellent (used), Year of construction: 2018, operating hours: 7,819 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 720 mm, nominal power (apparent): 26 kVA, controller manufacturer: Mazak, controller model: SmoothX, workpiece length (max.): 2,500 mm, workpiece width (max.): 820 mm, total height: 3,355 mm, total length: 4,250 mm, total width: 4,046 mm, table width: 820 mm, table length: 2,500 mm, table load: 1,700 kg, rotary table diameter: 500 mm, rotational speed (min.): 18,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 7,819 h, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Continuous 5-axis machining. Cromar particle filter chip conveyor, 15 bar internal cooling, Blum workpiece measurement system. Tool magazine with 30 tool slots. Automatic tool length measurement. Work area mist extraction. TI301 – CNC rotary table (360,000 positions) DS50C-R1-Z. The rotary table can be used as a “C” or “A” axis. Handheld remote control. Bodpfx Aiozhwi Ashjli Schunk zero-point clamping system on the rotary table, including two pallets and a 5-axis machine vise.

Condition: used, Year of construction: 2011, Mazak HC Nexus 6000-II Mazatrol Matrix Nexus Year: December 2011 Pallet Size: 500mm x 500mm Movement: Max Workpiece: Ø 900 mm x 1000 mm Blodpfxev Tvive Aihoi Max Table Load: 1000 kg Spindle Speed: 10,000 rpm (2 gears) Spindle Power: 30/37kW Spindle Taper: CAT 50 Rapid Traverse X/Y/Z: 60 m/min Tool Magazine: 80

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Blsdpfx Aetmtktjihoi Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: good (used), Year of construction: 2008, turning length: 200 mm, turning diameter: 349 mm, Used Mazak Multiplex 6300Y CNC lathe Max turning diameter approx. 350 mm Blsdoyvgbxspfx Aihoi Max turning length approx. 200 mm Gantry loader max 2 x 40 kilograms 2 spindles, 3 axes per spindle + Y axis, C axis + M spindle Gantry loader, loading magazine, discharge conveyor

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 630 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: 640M, spindle speed (max.): 12,000 rpm, spindle motor power: 26,000 W, number of slots in tool magazine: 120, number of axes: 5, This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details. • Table size: 500 × 500 mm • Tool magazine capacity: 120 positionsCondition • Machine in working condition • Complete and fully operational • Sale due to reallocation of production assetsAvailability / Sale terms • EXW sale Blsdpfx Aiey Ey N Nehei • Technical documentation available upon request • Available for commercial valuation • Possible technical inspection / site visit • Direct purchase negotiations possible Additional equipment • Pallet system: Palletech – 12 stations + 2 loading/unloading stations • Renishaw workpiece probe • Laser tool presetting • High-pressure coolant system: 18 bar • Belt-type chip conveyor