Used Mazak Super Quick Turn 200 X 500 for sale (301)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Csdpfx Ajz Rxg Hsbrohd Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2007, operating hours: 18,000 h, Mazak QTN 250MSY Year 2005 Steering unit: Fusion 640 Maximum swing 640 mm Machine diameter / standard machinable diameter 380 mm Maximum workable length 525 mm Bar capacity 77 mm Main spindle dimension 250 Subspindle dimension 250 Spindle speed 4000 Spindle nose ASA 8 Chodpfeiqgfbox Abrod Spindle hole 88 VDI turret type Number of tools 12 Spindle speed 5000 rpm Main spindle motor (continuous / 40% ed) 26 KW 300L cooling tank Carpet chip conveyor

Condition: used, spindle bore: 56 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 540 mm, total height: 1,720 mm, total length: 2,550 mm, total width: 1,440 mm, overall weight: 2,800 kg, spindle nose: A2-6, CNC Lathe Manufacturer: MAZAK Model: QUICK TURN 10N Control: MAZATROL CAM T-2 Technical Details: Max. swing over bed: 440 mm Standard machining diameter: 150 mm Max. workpiece length: 507 mm X-axis: 155 mm Codpj Aa A Rysfx Abrehd Z-axis: 540 mm Spindle speed: 10 – 2,600 rpm Drive power (30 min rating): 7.5 kW Drive power (continuous operation): 5.5 kW Spindle bore: 56 mm Spindle nose: A2-6 Number of tool stations: 8 positions Tool size: 20 x 20 x 150 mm Dimensions (L x W x H): 2,550 x 1,440 x 1,720 mm Approx. weight: 2,800 kg Condition: Used The machine does not include a chip conveyor! Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: used, Empty weight: 12.500 kg Dimensions (LxBxH): 725 x 287 x 178 cm Serial number: 152040 Control system: Mazatrol L32B X-axis: 2685 mm Y-axis: 1270 mm Z-axis: 100 mm Indexing table: yes Chedpjz R S Tbefx Abrjd Cutting capacity: 25 mm Maximum workpiece dimensions: 2,500 × 1,250 × 25 mm Maximum load: 615 kg Nominal laser power: 4,000 W Laser type: CO₂ – YB-L400A 8M Machine weight: 12,500 kg Includes Donaldson exhaust system Length: 7,250 mm Width: 2,875 mm Height: 1,780 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2004, CNC turning/milling center Manufacturer: MAZAK Machine model: Integrex 200 2S Control: Mazatrol 640 MT pro Year of manufacture: 2004 TECHNICAL DATA Swing diameter, max. (mm) 660 Turning diameter, max. (mm) 660 Max. turning diameter over slide (mm) 500 - 660 Bar machining up to Ø (mm) 64 Workpiece weight - Chuck workpiece (kg) 100 - Shaft workpiece (kg) 150 Travel distances - X-axis (mm) 580 - Z-axis (mm) 1,045 - Y-axis (mm) ± 80 - W-axis (mm) 1,050 - B-axis (degrees) -30 to +195 Rapid traverse rate (m/min) - X-axis (m/min) 38 - Y-axis (m/min) 26 - Z-axis (m/min) 38 - W-axis (m/min) 30 - C-axis (rpm) 400 Feed rate range - X / Z / Y-axis (mm/min) 0 – 8,000 Main spindle integrated spindle motor - Speed range (stepless) (rpm) 35 – 5,000 - Drive power (kW) 22 - Torque max. (Nm) 349 - Spindle nose A2 - 6 inches - Indexing (degrees) 0.0001 Second spindle - Speed range (rpm) 35 – 5,000 - Drive power (kW) 18.5 - Torque max. (Nm) 326 - Indexing (degrees) 0.0001 Driven tools - Speed range (rpm) 15 – 12,000 Codpfxe Ahynke Abrohd - Drive power (kW) 15 - Torque max. (Nm) 120 - Tool holder Capto C6 Tool magazine - Number of tool positions 40 - Tool weight max. (kg) 10 - Tool diameter max. (mm) 90 - with free secondary positions max. (mm) 125 - Tool length max. (mm) 300 - Tool change time (sec.) approx. 1.3 sec Connected load 62 kVA Operating voltage 400 V / 50 Hz EQUIPMENT FEATURES + Coolant tank capacity 220 liters + Chip conveyor, hinged belt design, discharge to the side + Automation alphaMAX ++ Industrial robot designation Motoman NX 100 ++ Number of axes 6 ++ Load capacity 20 kg ++ Positional repeatability ± 0.06 mm DIMENSIONS and WEIGHTS Machine weight (kg) approx. 10,200 Machine footprint (mm) 3,820 x 2,060 Subject to changes and errors in technical data and specifications.

Condition: ready for operation (used), Year of construction: 2007, Make: MAZAK Chodpfjy I Uviex Abred Type of machine: QuickTurn Nexus 250-II Year of manufacture: 2007 Control system: Mazatrol Matrix Nexus Machine's weight: 5.200 kg Tool holder: BMT Speed range: 4.000 1/min Cutting diameter: 380 mm Turning length: 500 mm Tool turret - slots: 12 Pl. Spindle opening: 76 mm

Year of construction: 2001, condition: good (used), functionality: fully functional, Machine is being sold due to factory closure. Includes a bar loader. Csdpezx Hv Hofx Abrohd

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Chedpfx Aboz Ndu Eerod Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2005, MAZAK lathe Model: QTN 350 MY X 1500 Year 2005 Control unit: Fusion 640 Maximum turning diameter (capacity): 720 Machinable diameter / standard machinable diameter (capacity): 420 Maximum machinable length*1 (capacity): 1500 mm Bar capacity (capacity): 102 Centering dimensions (main spindle): 315 Spindle speed (main spindle): 3300 Codpfjz Apkbjx Abrohd Spindle nose (main spindle): ASA 11 Spindle bore (main spindle): 112 Spindle speed (powered tool spindle): 4000 Travel (tailstock): 1550 Taper (tailstock): CM 5 Main spindle motor (continuous / 40% duty) (motors): 37 Kw Coolant tank (coolant): 400 l Steady rest: SLUB4

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F Chsdstugggspfx Abrod - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC Cjdpfx Asz Ihmpebrehd - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.

Condition: excellent (used), Year of construction: 2017, operating hours: 700 h, functionality: fully functional, turning length: 710 mm, turning diameter over cross slide: 380 mm, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 710 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, total height: 1,825 mm, total length: 3,385 mm, total width: 1,760 mm, overall weight: 5,750 kg, Equipment: documentation/manual, TOUR CNC 4 AXES MAZAK MAZATROL SMOOTH C YEAR 2017 CHUCK DIAMETER: 210 mm MAX. MACHINING DIAMETER: 380 mm SPINDLE BORE: 76 mm BAR MACHINING: 65 mm SPINDLE SPEED: 5000 rpm Csdpfe Agvadex Abrjhd TURRET TOOL SPEED: 5000 rpm 12-TOOL TURRET CHIP CONVEYOR ROBOT INTERFACE AUTOMATIC DOOR 3-COLOR LAMP MIST EXTRACTOR WEIGHT: 5750 kg 8 fixed tool holders 3 rotating tool holders

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: OPTIPLEX FIBER II 4020, Manufacturer: Mazak Model: OPTIPLEX FIBER II 4020 Year: 2016 Type: 2D fiber laser for sheet metal cutting Design: Flying Optics Control: Mazatrol Preview G / Preview 3 CNC Laser source: Fiber IPG YLS/YDS Working area and dimensions of workpiece Maximum sheet size: 4000 × 2000 mm 157.5" × 78.7" Maximum sheet weight: 1600–1920 kg Axis ranges X-axis: approx. 4075 mm (160.4") Y-axis: approx. 2060 mm (81.1") Z-axis: approx. 110 mm (4.33") Number of controlled axes: 3 Speeds and accuracy Rapid traverse X/Y: up to 120 m/min approx. 4724 ipm Positioning accuracy: ±0.05 mm / 500 mm Axis drive: X/Y: rack and pinion Chodpfx Aszg U Akjbrjd Z: ball screw Resonator power: 6 kW Maximum cutting thicknesses For the 6 kW version: Material Max. thickness carbon steel up to 25–26 mm stainless steel up to 25 mm aluminum up to 25 mm copper up to 12 mm brass up to 12 mm Standard / optional equipment Typical equipment: automatic pallet changer (2 tables) Multi-Control Torch automatic nozzle change automatic focus adjustment piercing monitoring automatic head calibration collision sensors dust extraction intelligent cutting process monitoring

Condition: ready for operation (used), Year of construction: 2011, operating hours: 44,137 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, number of axes: 2, Horizontal turning machine manufactured in 2011. This Mazak Quick Turn Smart 100 S (QTS 100 S) features a maximum turning diameter of approximately 280 mm and a turning length of about 308 mm. It includes a 12-position drum turret for efficient tool changes and a programmable tailstock. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 100 S machine we have for sale. Contact us for further details. MAZAK Quick Turn Smart 100 S (2011) - INFO- Main Spindle C-Axis: Without C-axis - Control: Mazatrol Smart (10.4" Color LCD) - Operating Hours: 44,137 hours - Turning Length: approx. 308 mm (Z-travel approx. 340 mm) - Turning Diameter: max. approx. 280 mm - Swing Diameter: approx. 584 mm - Turret: 1 Turret, 12-position drum turret (Bolt-on type), index time 0.17 s Codpsz N Hdwofx Abrohd - Tool Holder: Mazak block holder (Bolt-on), various tool adapters / tool holders included - B-Axis (stepless 0.001°): No - Tailstock: Yes, programmable tailstock (centering point MT 4) - Main Spindle Speed: 6,000 rpm (Spindle nose A2-5, drive approx. 11 / 7.5 kW) - Bar Loader: No (Defective) - Bar Capacity / Passage: Ø 42 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included) Various tool adapters, tool holders, clamping devices, and set of collets - Chip Conveyor: No Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes Chjdpfx Abjzr U Auorjd

Condition: ready for operation (used), Year of construction: 1992, spindle speed (max.): 3,600 rpm, bar diameter (max.): 60 mm, total width: 2,000 mm, total height: 1,900 mm, travel distance X-axis: 180 mm, overall weight: 4,300 kg, controller manufacturer: MAZATROL, controller model: T32-2, product length (max.): 2,700 mm, number of axes: 2, Multi-spindle turning machine manufactured in 1992. This Mazak Quick Turn 18 NSP features a maximum turning diameter of 260 mm and a turning length of 500 mm. It includes a tool turret with 8-fold / 16 positions and a spindle speed range of 36 - 3,600 rpm. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn 18 NSP machine we have for sale. Contact us for further details regarding this machine. Chedpfx Abjzarf Rjrsd - Control: MAZATROL T32-2- Max. Turning Diameter: 260 mm- Max. Turning Length: 500 mm- Speed Range Main Spindle: 36 - 3,600 rpm- Speed Range Sub-Spindle: 36 - 3,600 rpm- Travel Z-Axis: 510 mm- Travel X-Axis: 180 mm- Spindle Bore: Ø 70 mm- Bar Loader Length: 3,000 mm- Collet Chuck Holder: For 185 E collets- Collet Chuck Range (Main Spindle): Ø 4 - 60 mm- Sub-Spindle: 3-jaw chuck, Ø 125 mm to Ø 70 mm- Tool Turret: 8-fold / 16 positions- Tool Eye: Measuring probe for tool measurement in working area- Main Spindle Chuck: KITAGAWA 3-jaw chuck Ø 254 mm- Coolant System: Complete coolant equipment- Foot Switch: 2 double foot switches for opening/closing both chucks- Machine Weight: 4,300 kg- Machine Dimensions (L x W x H): 2.7 x 2.0 x 1.9 m Optional - Drip pan (2500 x 2700 mm), IRCO 3000 mm bar loader Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2023, For Sale: Mazak OPTIPLEX 4020 FIBER III Fiber Laser Cutting Machine Offered for sale is a Mazak OPTIPLEX 4020 FIBER III, manufactured in 2023 and built by the renowned Japanese machine tool manufacturer Yamazaki Mazak Corporation. This modern fiber laser cutting system combines high productivity, precision, and reliability, making it suitable for a wide range of sheet metal processing applications. Technical Data - Manufacturer: Yamazaki Mazak Corporation - Model: OPTIPLEX 4020 FIBER III - Machine Type: Fiber Laser Cutting Machine - Year: 2023 - Machine Weight: Approx. 5,300 kg - Origin: Japan Chjdpfx Asz Ia Ulsbred - Cutting hours : 2592h - Operating hours : 5110h Technical Specifications - Working Area: 4,000 x 2,000 mm - Laser Technology: Fiber Laser - CNC Control: Mazatrol Preview G / Smart Factory compatible - Automatic Focus Cutting Head - High-Speed Linear Drives - Intelligent Nozzle Change System - Automatic Cutting Condition Optimization - Energy-Efficient Fiber Laser Source - Advanced Collision Protection - Integrated Process Monitoring Availability: Immediately Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: Yamazaki Mazak Corporation * Model: OPTIPLEX 4020 FIBER III * Machine Type: Fiber Laser Cutting Machine * Year: 2023 * Machine Weight: Approx. 5,300 kg * Working Area: 4,000 x 2,000 mm * Laser Technology: Fiber Laser AVAILABILITY: IMMEDIATELY * Cutting hours: 2592h

Condition: good (used), Year of construction: 2006, operating hours: 37,000 h, functionality: fully functional, number of slots in tool magazine: 60, Equipment: documentation/manual, 5-axis machining center MAZAK VARIAXIS I 500 with pallet changer Year: 2006 Numerical control: Mazatrol Matrix Controlled axes: 5 continuous axes X-axis travel: 510 mm Y-axis travel: 510 mm Z-axis travel: 460 mm A-axis: -120° / +30° C-axis: 360° Table size: 500 x 400 mm x 2 Maximum load on the table: 300 kg Distance from spindle nose to horizontal table: 190 - 650 mm Chedpfszz R Acox Abrsd Distance from spindle nose to vertical table: 140 - 600 mm Maximum spindle speed: 12,000 rpm Spindle power: 22 kW Tool magazine capacity (automatic tool changer): 60 Chip conveyor

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 4,000 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 960 mm, number of axes: 5, This 5-axis Mazak INTEGREX J-200 S was manufactured in 2021. It features a maximum machining diameter of 500 mm, X-axis travel of 450 mm, Y-axis travel of 200 mm, and Z-axis travel of 960 mm. The machine is equipped with a 36-tool magazine and a maximum spindle speed of 4,000 rpm. If you are looking to get high-quality mill-turn capabilities, consider the Mazak INTEGREX J-200 S machine we have for sale. Contact us for further details. • Control: Smooth G • Distance between spindles: 1000 + 440 mm • Max machining diameter: 500 mm • Spindle attachment: A2-6 • Max bar capacity: 65 mm • Spindle bore: 76 mm • Tool magazine: 36 Capto Additional equipment • Chip conveyor: Mayfran belt type Cjdeyxc N Espfx Abrehd

Condition: ready for operation (used), Year of construction: 2018, operating hours: 14,396 h, travel distance X-axis: 350 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: SmoothX, workpiece height (max.): 350 mm, total height: 2,840 mm, total width: 1,900 mm, table load: 200 kg, overall weight: 7,100 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, tool weight: 8,000 g, product length (max.): 3,060 mm, number of axes: 5, This 5-axis Mazak VARIAXIS J-500/5X was manufactured in 2018. It features a maximum workpiece diameter of 500 mm and a maximum table load of 200 kg. The machine is equipped with a 19-inch colour touchscreen and a maximum spindle speed of 12,000 rpm. If you are looking to get high-quality simultaneous 5-axis machining capabilities, consider the Mazak VARIAXIS J-500/5X vertical machining centre we have for sale. Contact us for further details. • Cutting time (“cutting only”): 14,396 h 54 min • Working capacity and travels • Max workpiece diameter: 500 mm; height: 350 mm • A-axis tilt: -120° to +30°; C-axis rotation: ±360° • A/C indexing increment: 0.0001° • Rapid traverse X/Y/Z: 30,000 mm/min • Max cutting feed X/Y/Z: 30,000 mm/min • A-axis indexing time: 0.6 s per 90° • C-axis indexing time: 0.55 s per 90° / 1.05 s per 180° • Guideways: Roller linear guideways • Table and clearances • Tilting/rotary table with A and C axes • Table size: 500 × 400 mm • T-slot table (as specified in final configuration) • Spindle nose to table surface, table horizontal: 50–560 mm • Spindle nose to table, table vertical: 40–550 mm • Spindle • Spindle chiller; spindle cooling oil tank: 16 L • Programmable spindle orientation in 1° increments • Tool changer and magazine • ATC with recovery function; digital magazine display; external magazine operating panel • Tool selection: fixed magazine addresses with automatic shortest-path selection • Max tool length: 300 mm • Max tool diameter with adjacent tools: 90 mm; with adjacent pockets empty: 130 mm • Chip-to-chip time: 6.20 s • Measuring and probing • Automatic tool length measurement and tool breakage detection • G37 automatic tool length measurement function • Absolute positioning system • MAZA-CHECK system • Preparation for RMP600 workpiece probe • Coolant and thermal management • Through-tool high-pressure coolant (~15 kgf/cm² ≈ 14.7 bar), flow ~35 L/min • Coolant tank: 300 L • Coolant washdown system • Cooling for X/Y/Z-axis ball screws • Control and software • MAZATROL conversational and EIA/ISO programming; simultaneous 5-axis control in EIA/ISO • G00 Slope Constant; Smooth restart; Tilted machining plane; Inverse Time Feed • Extended work offsets: 300 pairs; Variable macros: 600 variables • Polar coordinate programming; Tornado machining cycle • High-speed machining and smoothing; Geometric compensation for rotary axes • Seamless Corner Control; Variable Acceleration Control • Interfaces: USB, LAN, SD memory card • Safety, enclosure, compliance • Full working-area enclosure with top cover Cedpfx Aez Ipzuebrehd • Interlocked operator door; working-area lighting • Intelligent Safety Shield (ISS) • CE marking • Automation/operation aids • Automatic machine power on/off and warm-up Additional equipment • Right-side hinged-belt chip conveyor for steel machining • European-market power transformer • Machine installation kit • Polish manuals and safety labels Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: used, functionality: fully functional, Year of construction: 2004, Mazak Super Turbo-X612 Mk II (2004) CO2 laser cutting machine with 4,000 W laser output for 4,000 x 2,000 mm sheets up to 25 mm thick. Mazatrol L32B CNC control. CNC CONTROL Controller: Mazatrol L32B LASER Laser source: CO2 Rated laser output W: 4.000 TRAVELS & WORK AREA X-axis travel mm: 4.185 Y-axis travel mm: 2.020 Z-axis travel mm: 100 Max. sheet size mm: 4.000 x 2.000 Max. table load kg: 1.500 DIMENSIONS Machine weight kg: 23.900 EQUIPMENT & OPTIONS Csdpo Aa A Tuofx Abrjhd • Mazatrol L32B CNC control • CO2 laser resonator, 4,000 W rated output

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW Chsdpsv Dxw Rofx Abred tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: good (used), Year of construction: 2008, operating hours: 54,682 h, functionality: limited functionality, machine/vehicle number: 211934, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, feed length X-axis: 730 mm, feed length Y-axis: 730 mm, feed length Z-axis: 740 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 57 kVA, controller manufacturer: Mazatrol, controller model: Mazatrol Matrix Nexus, workpiece length (max.): 800 mm, workpiece width (max.): 800 mm, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 700 kg, total height: 2,814 mm, total length: 4,690 mm, total width: 2,330 mm, table width: 500 mm, table height: 1,100 mm, table length: 500 mm, table load: 700 kg, rotary table diameter: 500 mm, rotational speed (min.): 35 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 25,876 h, coolant supply: 8 bar, distance table to spindle center: 830 mm, distance table center to spindle nose: 810 mm, spindle motor power: 25,000 W, spindle mount: MK 1, spindle nose: ISO 40, number of spindles: 1, number of slots in tool magazine: 40, mount diameter: 100 mm, input voltage: 480 V, Equipment: chip conveyor, documentation/manual, We are selling a used Mazak HCN Nexus 5000 machining center, manufactured in 2008, with a dual-pallet changer. Chsdpfx Ae Agnq Hjbrod This is a well-maintained machine from its first owner, and it can be inspected while powered on. Photos and a technical description can be found in the attachment.

Year of construction: 1989, condition: excellent (used), For sale: CNC lathe Mazak QuickTurn 20N. The lathe is in very good condition. Equipment includes: MAZATROL T-2, MAZATROL CAM-T-2 control system. Chjdpfxez Scfke Abrsd

Condition: good (used), Year of construction: 2004, TURNING AND MILLING CENTER MAZAK INTEGREX 200 IV ST THE MACHINE IS IN GOOD CONDITION, VISIBLE AT OUR WAREHOUSE IN VILLORBA 20 TOOLS AND HIGH PRESSURE SYSTEM 20 BAR Producer MAZAK Model INTEGREX 200 IV S Year 2007 Used condition Location Treviso, Italy Price Category Multitasking Machines Subcategories Stock number 633 Serial number 216700 Matrix governing unit Maximum workable length 1050 mm Maximum workable diameter 660 Bar passage 51 Main spindle diameter 210 Main spindle power and revolutions 22 KW 5000 rpm C axis 360° Csdpfoiz Tmgjx Abrjhd Counter spindle chuck diameter 210 Counterspindle power and revolutions 18.5 KW 5000 Rpm C axis on the 555 counter spindle X-axis (travel) 580 Y axis (strokes) 160 Z axis (strokes) 1050 B axis (strokes) 225° Milling spindle power 18.5 kW Milling spindle speed 12,000 rpm CAPTO C6 spindle mount Maximum warehouse capacity 20 UT High pressure system through the spindle 20 BAR Chip conveyor Si carpet