Used Mikron Vce 800 for sale (176)

Condition: used, Year of construction: 2007, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2007 Control : Heidenhain iTNC 530 Speed : 42000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : HSK 40 In Generel: Technology:Automated graphite milling centre Components:2x 5-axis HSC milling centres + pallet system with robot Manufacturer:Mikron + EROWA Types:HSM 400 U + HSM 600 U + Robot Multi Twin Year of construction:2007 Control:Heidenhain iTNC 530 Speed:42,000 rpm Tool holder:HSK 40 Machine I: Manufacturer:Mikron Type:HSM 600 U Traverse paths X/Y/Z:800/600/500 mm Dcodpfjxgpwcex Adaep Spindle speed:42,000 Tool holder:HSK 40 B-axis:+30° / -110° C-axis:360° C-axis speed:360 rpm Clamping surface:Erowa UCP 320x320 mm Max. table load:120 kg Tool magazine:68 stations Machine II: Manufacturer:Mikron Type:HSM 400 U Traverse paths X/Y/Z:400/240/350 mm Spindle speed:42,000 Tool holder:HSK 40 B-axis:+ - 110° C-axis:360° C-axis speed:250 rpm Clamping surface:ITS 148 Powerchuck Table load max:25 g Tool magazine:36 stations Automation: Manufacturer:EROWA Type:Robot Multi Twin Gripper station:6 station, various gripper Round storage:5 levels Level 1-2:5x UCP 300x300 mm Level 3-4:15x ITS 148 Level 5:30x ITS 50 Equipment: Measuring systems:Direct in all axes Workpiece measurement:Infrared measuring probe Tool measurement:LASER Set-up mode:Electronic handwheel Graphite extraction:2x BURN WK 5806 Automation:Round pallet storage

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Dcodpfx Adeuxrv Hjaep Technical data shown on pictures.

Condition: used, Year of construction: 2007, x-travel 1.350 mm y-travel 1.150 mm z-travel 895 mm table diameter 4.590 x 6.990 x 3.150 mmmm handwheel el. tool adaptor HSK-A63 turning speeds 24.000 U/min engine output 38 kW table weight 1.600 Kg 92 fach Control HEIDENHAIN iTNC 530 Dcodpfx Adoxddttsajp a-axis A +16/-120 c-axis 360 ° weight of the machine ca. 14.000 kg dimensions of the machine ca. 4.590 x 6.990 x 3.150 mm

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them. Dcedpfxoq Hdwuj Adaep

Condition: good (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 240 mm, feed length Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 30,000 rpm, Mikron HSM 400U 5-Axis CNC (Graphite Mill) Year:2002 S/N: 107.87.00.024 Control: Heidenhain iTNC530 Spindle Taper: HSK-E40 Spindle Speed: 30,000 RPM Spindle Power: 13 kW (17 HP) ATC: 36-Station Automatic Tool Changer Travels: X: 15.723″ (400 mm) Y: 9.434″ (240 mm) Z: 13.758″ (350 mm) A-Axis: ±110° C-Axis: 360° / 0.001° Djdpow H Izpjfx Adajcp Tooling System: System 3R Tooling Base (on Trunnion) 48-Station System 3R Tooling Carrousel Blum Laser Tool Measurement System Rapid Traverse Rate: 40 m/min (1,575 IPM) Repeatability: ±0.002 mm Max Workpiece Capacity: Ø230 mm × 350 mm Height Max Load: 25 kg Structure: Polymer Concrete Frame Cooling System: Full Liquid Cooling Machine Dimensions (L×W×H): 3,840 × 2,540 × 2,640 mm Weight: 6,700 kg

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155 Djdpfx Adj H I Hdjaecp

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm Dcedpfx Aoub Amfsdaep - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Dcjdpfjxg Rvyjx Adajp

Condition: good (used), Year of construction: 2002, Machine is in good condition. Parts shown by hand not come. Dsdpfxstwpame Adaecp

Condition: used, Year of construction: 2001, Technical data: Tool holder: SK 40 Travels: X-axis: 530 mm Y-axis: 450 mm Z-axis: 450 mm Max. Tool weight: 260 kg Spindle speed: 12000 1/min Max. Table load: 380 kg Weight, approx.: 6500 kg Dcodpfxst Hr Ahs Adajp Dimensions (DxWxH), approx.: 2000 x 2200 x 2400 mm Equipment: - Control Heidenhain TNC 430 - 4-axis from SMP (France)

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Dodpfxownq Sgs Adaocp Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Dsdpfx Ascl Ruredajcp Speed range, continuous 10-7500 min-1 Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 min. module 0,1 total power requirement 0,4 kW Dcjdpfxsw N S D Ss Adajp weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, nominal power (apparent): 10 kVA, overall weight: 6,500 kg, spindle speed (max.): 20,000 rpm, Heidenhain TNC530, 4th axis rotary table, spindle 12,200 rpm HSK 63, table 850x530mm, travels 600x450x450mm, 30-tool changer, weight 6500 kg. Dodpfjw Dc Irex Adascp

Condition: good (used), Year of construction: 2000, 20000 rpm, Djdpfx Adjr Urm Seaocp tool measurement on table will come, Parts shown by hand not come.

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Dcodpfx Asxcxz Nodasp

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Dsdpfx Asw Hxzmsdajcp

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Extensive accessories available if required! Dsdpfxji El Ias Adascp Please ask if you are interested !

Condition: ready for operation (used), Year of construction: 2008, Movement X-Axis Movement 600 Y-Axis Movement 450 Z-Axis Movement 450 Dcodpfjxc Rb Uex Adasp This 5-axis MIKRON UCP 600 Vario was manufactured in 2008, featuring a Heidenhain control, 600 mm X-axis, 450 mm Y-axis, and 450 mm Z-axis travel. It boasts a 20,000 rpm spindle speed, HSK-A 63 spindle nose, and a 75-slot tool magazine. Additional features include a BLUM tool measurement system and a 600L coolant tank with belt filter. Consider the opportunity to buy this MIKRON UCP 600 Vario vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Dcodpfog Nw Rzsx Adajp

Condition: good (used), MAchine come with toolholders. Dodpfsvk Ng Aex Adaocp

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 positions Tool holder: ISO-B40 Travel X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Dcsdpsw Hq Ifsfx Adajp Table NC rotary swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Swivel Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine runtime hours: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D probe Note: The tool holders visible in the images are included in the scope of sale and delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the scope of sale and delivery. The drive for the head swivel axis is missing.

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Dcodpfewit Rhjx Adaep Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Dcedpjw Sxyxjfx Adajp

Condition: ready for operation (used), Year of construction: 2011, operating hours: 15,000 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 rpm Number of axis 5 Movement X-Axis Movement 650 Y-Axis Movement 650 Z-Axis Movement 550 Tools Number of index 30 Type of tool holder HSK63 Additional Equipment Internal cooling supply with ARO belt filter system and extraction 30 tools, HSK63, 20000 rpm Optional accessories such as clamping devices and tools available This 5-axis MIKRON HPM 600U was manufactured in 2011. A vertical machining centre designed for precision and efficiency, it's ideal for complex machining tasks. Consider the opportunity to buy this MIKRON HPM 600U vertical machining centre. Contact us for more information. Dcsdpfx Aew S N Erodaop Application Types Milling