Used Mitsubishi Fg 20 for sale (384)

Condition: good (used), Year of construction: 2007, operating hours: 3,082 h, load capacity: 5,000 kg, lifting height: 5,020 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, mileage: 3,082 km, This 5-ton LPG forklift by Mitsubishi is from 2007 and is in good condition. Starts, drives, and lifts without any issues. Capacity: 5,000 kg. Lifting height up to 5,020 mm. Equipped with FREELIFT, SIDESHIFT, and FORK SPREADER. Fitted with a new starter battery. Watch the video online! Hsdpjxz Thzofx Agwepa

Condition: ready for operation (used), Mitsubishi HA33C-S synchronous servo motor SN:M54644060 + Tamagawa OSE 12.5KN-6-12-0 encoder SN:7945T, used, normal signs of use, 100% functional, scope of delivery as per photos Hsdpfx Agji D I N Ujwjpa

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 16,297 h, load capacity: 7,000 kg, lifting height: 3,000 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,600 mm, drive type: Treibgas, LPG forklift Hsdpfx Agewtuz Aewjpa Load centre: 600 Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Good Front tyres type: Solid rubber Front tyres condition: 60 - 80% Rear tyres type: Solid rubber Rear tyres condition: 40 - 60% Fork positioner, 3rd valve, rear work light, front work light, heater, full cabin,

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading Hpedsvt Ec Sspfx Agwoa for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: used, New: No Part suitable for: Mitsubishi Hjdpfx Agjxb Txtswepa Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Hpsdpsx Hz Shsfx Agwsa

Condition: excellent (used), Mitsubishi Industry 6-Axis Articulated Arm Robot Here we offer Mitsubishi industrial 6 axis articulated arm robot. RV-Series Industrial Robots Compact and powerful flexible automation and high reliability. The RV-Series offers a highly dynamic 6-axis jointed-arm robot for maximum quality. Type: RV-3SDB-S15 Number of axes 6 Maximum lifting force 3.5 kg Reach radius 642 mm Weight 38Kg Condition: used / used Scope of delivery: (See picture) (Changes and errors in technical data, specifications are reserved!) Hodpfx Agsgkg Dlewspa Further questions we can answer gladly on the phone for you.

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Hedpfx Agox Dw Nujwopa

Year of construction: 2005, operating hours: 4,960 h, condition: used, functionality: fully functional, lifting height: 4,700 mm, free lift: 1,500 mm, mast type: triplex, construction height: 2,500 mm, drive type: Treibgas, load capacity: 4,000 kg, LPG Forklift Load Center of Gravity: 600 Mast Type: Triplex Condition: Ready for Use and Fully Functional Technical Condition: Good Hjdov Nb Ucjpfx Agwepa Front Tires Type: Super Elastic Front Tires Condition: 60 - 80% Rear Tires Type: Super Elastic Rear Tires Condition: 40 - 60% Sideshift, 3rd Valve, Rear Work Lights, Front Work Lights, Heating, Full Cabin

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,700 h, load capacity: 3,500 kg, lifting height: 4,040 mm, fuel type: gas, mast type: simplex, construction height: 2,640 mm, fork carriage width: 1,300 mm, fork length: 1,500 mm, empty load weight: 4,880 kg, total length: 2,930 mm, drive type: Treibgas, construction width: 1,300 mm, Liquefied petroleum gas (LPG) forklift Load center: 500 mm Fork width: 100 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tire type: Super elastic Hpsdpfx Agjwc Ewmewja Front tire size: 250/70-15 Rear tire type: Super elastic Rear tire size: 6.50-10 Description: In addition to this Mitsubishi model, we have approximately 200 heavy-duty forklifts, compact forklifts, pallet trucks, and side loaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Leasing and financing at favorable conditions are always possible. We are also happy to purchase your used equipment outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be glad to provide detailed advice on this FG35NT. P.S.: Our master forklift workshop specializes in repair, maintenance, refurbishment, and custom construction for forklifts from 8 tons and above. We are also happy to offer your vehicle for consignment sale at our location. Sideshift, fork positioner, Fork positioner opening range: 380 / 1,230 mm Heater, full cabin,

Condition: used, mileage: 165,375 km, power: 133 kW (180.83 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,000 mm, first registration: 06/2017, emission class: euro6, Year of construction: 2017, Equipment: air conditioning, airbag, central locking, cruise control, power assisted steering, trailer coupling, = Additional Options and Equipment = - Passenger airbag - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking Hsdpexzb E Ujfx Agwspa - Height-adjustable steering wheel - Center armrest - Multifunction steering wheel - Spare wheel = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 2,442 cc Transmission: 6 gears, manual transmission Dimensions Dimensions (L x W x H): 528 x 182 x 177 cm Weights Unladen weight: 1,950 kg Payload: 955 kg Gross vehicle weight: 2,905 kg Maintenance APK (Technical Inspection): checked until 06/2026 Identification License plate: 765117 Product Safety Manufacturer: RG Waalwijk Havenweg 15 5145NJ WAALWIJK, NL robert.

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg Hedpfx Asxpfy Sjgwspa ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Condition: excellent (used), mileage: 340,200 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2009, color: gold, Year of construction: 2009, Dutch documents Runs perfectly Air conditioning Leather etc... = Further information = Number of doors: 5 Engine capacity: 3,200 cc Unladen weight: 2,410 kg Payload: 1,090 kg Gross vehicle weight: 3,500 kg Technical condition: very good Hedsxv Eucspfx Agwepa Visual condition: very good Please contact Thierry Leemans for more information.

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Hpjdpox Dw Nhjfx Agwsa

Condition: used, Year of construction: 2012, operating hours: 609 h, load capacity: 2,000 kg, lifting height: 7,000 mm, fuel type: electric, construction height: 3,500 mm, gearing type: automatic, Equipment: cabin, Mitsubishi FB20AN electric forklift, year of manufacture: 2021, battery: 2021, operating hours: only 609 h, full cab, rated capacity: 2,000 kg, fork length: 1,500 mm, side shifter, fork positioner, lift height: 7,000 mm, triplex mast, hydraulic side shifter, motor: [11 kW / 15 HP], weight: 3,939 kg, in very good condition, immediately available for operation. We are happy to provide you with a leasing or financing offer upon request. Mr. Mihm (phone) will be pleased to assist you. For further information, please visit our website. Subject to prior sale and errors excepted. Hpodpfjxy Tzfox Agwsa

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2722 kg Hedpfx Aex D Ryyjgwjpa Control Unit Brand MITSUBISHI Model M800 Main Drive Number of axis 5 This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Application Types EDM

Condition: used, mileage: 110,035 km, power: 113 kW (153.64 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,000 mm, first registration: 09/2015, emission class: euro5, number of seats: 4, Year of construction: 2015, Equipment: air conditioning, airbag, central locking, cruise control, fog lights, traction control, trailer coupling, = Additional options and equipment = - Heated exterior mirrors - Passenger airbag - Driver airbag - Remote central locking Hpsdpfx Agoxzb Ayjwsa - Fog lights - Radio - Spare wheel = Further information = Number of cylinders: 4 Engine displacement: 2,442 cc Unladen weight: 2,070 kg Payload: 780 kg Gross vehicle weight: 2,850 kg Dimensions (L x W x H): 520 x 179 x 177 cm Registration number: 150515 Manufacturer: RG Waalwijk Havenweg 15, 5145NJ WAALWIJK, NL Robert.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 867 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,085 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, power: 41 kW (55.74 HP), fork carriage width: 1,000 mm, fork length: 1,200 mm, total length: 2,560 mm, drive type: Treibgas, construction width: 1,150 mm, LPG Forklift Load Centre: 500 mm Fork Width: 100 mm Fork Thickness: 40 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Torque converter / Automatic Condition: Operational and fully functional Technical Condition: Very good Front Tyre Type: Superelastic Front Tyre Size: 7.00-12 Front Tyre Condition: 80 - 100% Rear Tyre Type: Superelastic Rear Tyre Size: 6.00-9 Hodsxvt H Tjpfx Agwopa Rear Tyre Condition: 80 - 100% Description: Maintenance and safety inspection (UVV) renewed on delivery. Drive and hydraulic oil replaced. Machine in excellent condition with original 830 operating hours. Photos show the current condition of the unit. Sideshift, Fork positioner. Additional attachments such as fork positioner or similar are optionally available. 3rd valve, 4th valve, front working lights, load guard, full free lift, CE certificate, beacon. Fully enclosed cabin with heating available at extra cost.

Condition: used, Year of construction: 2020, System of 3 independent stations for soldering electrical components Designed for high quality soldering System working automated with 3 robots MITSUBISHI ELECTRIC Horizontal multi-joint SCARA industrial robotic arm with built-in stand-alone controller type CR800 The System is composed by high quality 3D camera control This set can be adjusted for soldering of different products Fume extractor system Comprising: 3x ROBOTS -MITSUBISHI ELECTRIC-RH-6FQRH5520N-D 1x KEYENCE-XR-HT40M 1x SCHNEIDER ELECTRIC HMI PROFACE-PFXSP5700WCD 2x TAICENN HMI TM-PC215W Hodpfjxny Alsx Agwopa 1x KEYENCE SR-1000 1x PUREX Fume extractor

Condition: ready for operation (used), Mitsubishi Electric RV-7FM-D1-S15 industrial robot SN: FG606002R – minor damage at the air connection, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about costs for packaging and shipping separately! The following components are also available in our shop: Controller "Mitsubishi CR750-07VD1-1-S15" / Connection cable "BKO-FA0741H05-D" / Connection cable "BKO-FA0739H05-D". Hodox Dw Nzepfx Agwjpa

Condition: refurbished (used), Guarantee in months: 12 Item No.: Mitsubishi MDS-C1-V2-3520 Servo Drive This is a service exchange item, a deposit is also required of 3000 EUR, which will be refunded upon receipt of your faulty unit. Hpodpfji Da S Ssx Agwja *All service exchange items are subject to inspection, prior to any refund. If the service exchange item is beyond repair, the service exchange cost will not be refunded. However, a full report can be made available.*

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg Hodpsxl A Aijfx Agwopa U+V-Axis +/- 21 mm Misc. accessories MARCELS MASCHINEN AG

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Hpodpfxowtd Ede Agwea

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,760 mm, total width: 2,025 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 640 mm, table length: 540 mm, empty load weight: 2,700 kg, Equipment: documentation/manual, USED ​​MITSUBISHI MV1200-S Wire EDM Hedpoxlc Eqefx Agwopa

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Mitsubishi, frequency converter type FR-S520SE-0. 4K-EC -Power: 0.4 kW -Input: 200- 240 V 50/60 Hz -Output: 3PH AC200-240V 0.5-120Hz Hpsdpfx Agjvrchpewea -Dimensions: 170/75/H180 mm -Weight: 1.3 kg