Used Mobile Car Press for sale (25,744)

Condition: excellent (used), functionality: fully functional, table width: 1,200 mm, table length: 2,500 mm, total length: 3,000 mm, total width: 2,100 mm, total height: 2,600 mm, overall weight: 700 kg, GLUE PRESS, rotary type, 3 sections | STROMAB ST 2500 | JBS MACHINERY | for wood! Fsdpfx Aljzxyfbe Sopn Rotary glue press for bonding tabletops – POWERFUL! Bonding length: 250 cm Rotary glue press STROMAB ST 2500 TECHNICAL SPECIFICATIONS: - Working length: 25000 mm - Working width: 1200 mm - Pneumatic clamping system - 3 gluing sections - 6 pneumatic clamps per section - 3 side clamps per section Machine dimensions: - Length: 300 cm - Width: 210 cm - Height: 260 cm - Weight: 700 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS MACHINERY FOR WOODWORKING WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18-4101, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), This machine is specifically designed to produce highly accurate two-layer herringbone flooring. Applicable joint types: - Left and right models with tongue and groove - Groove and groove models - easylox® models (patented connection system) Planks are picked up at the front and placed into the machine. Grippers take over the plank and guide it along the profiling cutters. Here, the profile is created, and the bevel, if any, is applied. Then, the planks are transferred to a second transport system, which places the plank in a position where the tongue/groove or groove/groove, or easylox® joint is applied. The machine is fully CNC-controlled and extremely precise. Squareness, length, bevel size, and fit are fully computer-controlled and can be adjusted with high accuracy. Fodpfxsz Rkd Dj Al Sepn Smallest herringbone dimension: 90x450mm Largest herringbone dimension: 220x1200mm The machine consists of: “Sigmatek” digital touchscreen control panel; stack infeed arm, plank infeed unit, milling carriage, end machining unit, transport clamps, fixed milling position, pocket milling units, stack output unit, plank output unit; capacity, minimum thickness 12 mm, maximum thickness 25 mm, working pressure compressed air 7 bar, milling carriage feed speed 6 - 14 m/min, milling cutter overhang Ø 210 mm / 250 mm, profiling cutter Ø 250 mm, bevel cutter Ø 250 mm, pocket cutter Ø 44 mm - 50 mm; combined power approximately 2kW, for producing left/right herringbone and easylox; including manuals, machine books, and flexible hoses up to the ceiling. Extremely precise, fully automatic machine!

Condition: excellent (used), Year of construction: 2021, 2021 Morgan Rushworth XPE CNC 3100/100 CNC Pressbrake With ESA Bend CNC Touch Screen Controller Bending Power 100 Tonne. Bending Length 3,100mm. 'Y' Axis Approach Speed 75mm/sec. 'Y' Axis Bending Speed 10mm/sec. 'Y' Axis Return Speed 75mm/sec. 'X' Axis Travel 750mm. 'R' Axis Travel 160mm. Stroke 240mm. Daylight 505mm. Motor Power (2) 5.5kW. Nominal Power (Excluding Options) 21kW. With 2 Back Gauge Fingers, 2 Sheet Support Arms & Foot Switch. S/No. B28015 (2021). Fpodpfxoz H U Uke Al Son Overall Dimensions L4,350 x W2,040 x H2,515mm. Weight 5,900mm.

Condition: excellent (used), Overall dimensions: Width: 100 cm Height: 245 cm Length: 590 cm Working height: 155 cm Fpedpey Tkb Eefx Al Sen Width: 55 cm Length: 400 cm Pneumatic

Condition: excellent (used), Year of construction: 2000, Oil mist separator LAS Type:SMOG-H0G Built approx.2000 Fpjdpfx Aljr H D Ags Ssn

Condition: good (used), Year of construction: 2013, functionality: fully functional, power: 5 kW (6.80 HP), Automatic electro-mechanic throughfeed case clamp press with eletronic adjustment of the pressing forces, timing and programable closing sequence of the pressing elements. Manufacturer: SCM Group (division CPC) Model: Action TF2500 Production year: 2013 Machine state: plně funkční Main technical parameters: Fpsdpfxszgtg Is Al Ssn - max. cabinet dimensions: 2500 x 1250 x 650 mm - min. cabinet dimensions: 250 x 250 x 250 mm - feeding belt speed: 20 m/min - working height: 600 mm - length of the infeed conveyor: 2500 mm - length of the outfeed conveyor: 2500 mm - overall power 5kW (15A) Funkcionality: Automatic reading of the cabinet at the infeed including the automatic detection of the central fixed shelf. Programator: - control panel with touchscreen LCD (size 14 cm) - setting of the horizontal thrust (0-1300 kg) - setting of the vertical thrust (0-1300 kg) - selection of the closing sequence (top presser, side presser, top/side presser) - setting of the exact position of the middle side pressers

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 100 t, stroke length: 380 mm, table width: 300 mm, table length: 1,500 mm, throat depth: 1,100 mm, TECHNICAL DETAILS Pressing force: 100 t Max. stroke: 380 mm Stroke length: 100 mm Overhang: 1,100 mm Vertical adjustment: 750 mm Table length: 1,500 mm Table width: 300 mm Width between uprights: 1,100 mm Clearance under the hydraulic cylinder: approx. 1,100 mm MACHINE DETAILS Press type: Single-acting Control system: Conventional Motor power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 1,450 x 800 x 2,200 mm Net weight: 970 kg Shipping packages: 1 unit Fodpfxozxcldj Al Sspn EQUIPMENT Movable press cylinder Documentation CE certificate CE marking

Condition: used, Year of construction: 2002, functionality: fully functional, REF: MM6296 Fpedpjxuhw Dofx Al Son 1 x Offshell Services Ltd twin-lane shellfish peeling machine with 2 x Podmores feeding hoppers. Technical specification ⚙️ ✅ Manufacturer – Offshell Services Ltd. ✅ Model – The Offshell Press MK V (Peeler). ✅ Date of manufacture - 2002. ✅ Configuration – Twin units mounted side-by-side. ✅ Construction – Stainless steel and aluminium frame. ✅ Power – 3-phase electric supply. ✅ Operation – Mechanical off-shell press for food processing applications. ✅ Condition – Used, average wear, complete with manual / electrical drawings. Decommissioned and packed for transport

Condition: used, Type EURO SPEZIAL Max. working width: 3250 mm Max. working height: 1850 mm 4 vertical + 2 horizontal hydraulic cylinders. Motor power of hydraulic unit: 1,5 kW 380 V Made in Germany 1978 Transport dimensions 4100x1100x2700 mm Fodpfozvlncox Al Sspn Weight 980 kg Price 2350 Eur (EXW Jonava, Lithuania)

Condition: used, Used vertical, mobile, stainless steel AISI 316L reactor by BOCCARD (France) with a total capacity of 577 l. Reactor has a working volume of 300 l and is designed to operate at pressures ranging from -1 to 0,5 bar and temperatures up to 110 ºC. Internal dimensions: diameter 880 mm, length of straight wall line to inspection manway 800 mm. The heating and cooling jacket made of stainless steel AISI 304 has a capacity of 35 l and is designed to operate at pressures up to 3,5 bar and temperature up to 145 ºC. The jacket is insulated and clad with stainless steel sheet. Reactor has welded dished top equipped with inspection manway, with internal diameter 350 mm. Also in the top head there is a vertically downward installed homogenizing mixer, directly driven by an electric motor with a power of 2.2 kW, 400 V, 960 rpm, 50 Hz. Reactor has welded dished bottom with central discharge outlet and manually operated valve. Machine is mounted on an integrated frame with 4 wheels and an electrical cabinet equipped with an frequency inverter. Specifications: Capacity: 577 L Type of Stainless: 316 Stainless Steel Internal Pressure: 0.5 bar Internal Temperature: 110°C Jacket Pressure: 3.5 bar Jacket Temperature: 145°C Fedezbuhwjpfx Al Sspn Legs/Lugs/Mounting Ring: Legs Weight: 620 kg

Year of construction: 1993, condition: good (used), Offer 23100 Technical specifications: - Punching capacity, steel: 2 to 4 mm - Punching capacity, stainless steel: 2 to 3 mm - Horizontal reach: 30 mm - Vertical reach: 40 mm - Hydraulic unit, manufacturer NOLD, type No. 40.9-4, year of manufacture 1993 - Operating pressure: 250 bar - Drive: 400 V / 4 kW - Space requirement: W 600 x H 800 x D 900 mm - Weight, approx.: 350 kg Fsdpolnkrmsfx Al Sspn

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Fjdpfoy Egz Sjx Al Sopn Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm Fedjiidm Nspfx Al Sopn The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2000, Corrugated board press Manufacturer: Hüttenhölscher Fpsdpfxszuzvme Al Son Year of manufacture: 2000 Technical data Voltage: 400 V Current: 32 A Frequency: 50 Hz Compressed air: 6 bar Note: The technical data and descriptions are a transcript of the order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, functionality: fully functional, Gannomat Concept 70 Eco Body Press Year of manufacture: 2026 including the following options: - Rapid traverse speed, adjustable up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints in body pressing, as well as for drawer production. Brief description: • Proven tolerance compensation system (GANNOMAT system) • 2 potentiometers for steplessly adjustable pressing force • Minimum pressing force 300/500 daN (kg) for Concept Eco, or Minimum pressing force 600/800 daN (kg) for Concept Primus • Maximum pressing force 2200 daN (kg) for Concept Eco, or Maximum pressing force 3500 daN (kg) for Concept Primus • 3 pressing and traversing speeds 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely adjustable pressing time preselection with automatic opening function • Concept Eco: Simplest operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simplest operation via LCD display Universal application range: • Bodies, e.g. for furniture and cabinets • Mitered bodies • Bodies with an overhanging lid • Drawers • Pressing of multiple bodies / drawers Advantages: • Proven tolerance compensation system (GANNOMAT system) • Electromechanical body press with frequency-controlled geared motors • Independent vertical and horizontal pressing bars • High service life due to proven and high-quality components • Construction in a solid and robust design • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple operation via a simple and practical control panel • Fast pressing due to pressing bar positioning speed of up to 50 mm/sec (option) • Efficient due to precise pressing of various body sizes • Flexible due to adjustable parameters such as pressing force, pressing time, traversing speeds Fpsdsvxgrropfx Al Sjn • Precise due to angle-accurate pressing of furniture bodies and drawers • Professional production of bodies and drawers with a modern body press

Condition: new, Year of construction: 2026, functionality: fully functional, Mobile high-pressure waste container washers Autonomous container unit, independent from the chassis. Specifications: - Hydraulic lifting and lowering, - Washes either two small containers (120–240 L) or one large container (1100 L), - Two washing nozzles, - Programmable washing cycles, - Honda engine or equivalent, - Power generator Low operating costs: - 3.5 t permissible gross vehicle weight for the chassis, - Only a few liters of petrol for an entire working day, - Water recycling system (average 800–1000 liters per day), - Up to 100–150 containers (120–240 L) cleaned per day, - Biodegradable cleaning and disinfecting agents (EU-certified). Versatile applications: - The unit can be removed from the truck bed and used separately (especially important during winter). Additional options: - Cleaning of construction machinery, gardens, parks, playgrounds, kindergartens, schools, offices, traffic signs, facades, parking lots, and much more. - Hot water function. - Power sockets (mobile generator) for your electric tools. - Quick couplings for an additional water tank. More photos and videos available on request. Fpsdpfx Alowmln Tj Sjn

Condition: used, Dimensions: approximately 2500 x 1200 x 600 mm, semi-hydraulic, with electro-motorized adjustment of the press wall. Fedpozd Hm Nefx Al Sepn Storage location: Nattheim.

Condition: excellent (used), Year of construction: 2016, COMPAIR C115-12 COMPRESSOR, 11.5 m3, 12 BAR, 2016!! COMPAIR C115-12 portable compressor (DLT1303), fully serviced machine with air dryer (aftercooler). Very good condition. Technical specifications: Capacity: 11.5 m3/min; Fpsdpol Axmpsfx Al Sjn Working pressure: 12 Bar; Year of manufacture: 2016; Engine: CUMMINS Operating hours: 3538 hours Compressor in perfect working order.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction Fpodpew Nafkefx Al Son - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, pressing force: 120 t, total length: 100,000 mm, total width: 1,000 mm, total height: 2,600 mm, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Fpodpfxjqai H Te Al Ssn Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Fodpfxezy U Uye Al Sspn The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,828 h, functionality: fully functional, machine/vehicle number: 61700170, total width: 2,300 mm, total height: 3,300 mm, total length: 9,200 mm, overall weight: 10,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General information Year of manufacture: 2016 Fpjdsz Ea Rbjpfx Al Sjn Operating hours: 1,828 h Serial number: 61700170 Color: Blue CE certificate available: No Documentation available: No MACHINE DETAILS Dimensions and weight Overall length: 9,200 mm Overall width: 2,300 mm Overall height: 3,300 mm Unladen weight: 10,000 kg Transport data Transport dimensions: 9,200 × 2,300 × 3,300 mm (L × W × H) Transport weight: 10,000 kg Transport packages: 3 pcs.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Fpjdpfx Ajz Rk N Hel Son Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: new, Year of construction: 2026, functionality: fully functional, TECHNICAL SPECIFICATIONS: -Production Capacity: 150-200 Tons Per Hour -Crusher Type & Size: Turbo Impact Crusher – 1200x1000mm -Maximum Feeding Size: 600mm -Total Motor Power: 220 kW MIC-100 is a combination of: • Bunker • Vibrating Grizzly Feeder(Bypass) • Turbo Impact Crusher • Folding type bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires Fodoz Nhinjpfx Al Sopn • Fully Automation System • Easy walking platforms for maintenance • Diesel Generator (Optional) *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO XATS138 COMPRESSOR, 7.00 m3, 2017 Mobile compressor, ATLAS COPCO XATS 138, fully serviced! Technical data: capacity: 5.00-7.00 m3/min; Fpodpfx Ajid Iy Hol Ssn operating pressure: 7-10.3 bar; year of manufacture: 2017; engine: KUBOTA operating hours: 500 h !!!!!; compressor in full working order Below is a link to a video showing the machine in operation. ATLAS COPCO XATS138 COMPRESSOR, 7.00 m3, 2017. Tank capacity: 0 liters.