Used Mobile Homes for sale (6,671)

Condition: used, No. 04492 Mobile extraction unit / Mobile dust extractor with fine dust filter cartridge Bernardo DC 400 Used Air flow rate 2520 m3/h High air flow rate due to large filter surface Including cleaning brush for manual filter cleaning Effective filtering of finest particles Ksdpfx Aoxn Tlyog Nonc Filter surface 4 m2 Max. negative pressure 1800 Pa Suction connection diameter 1x 130 mm / 2x 100 mm Chip bag capacity 300 l Idle speed 2950 rpm Sound pressure 87.1 dB Motor output power S1 100% 1.5 kW (2.0 hp) Voltage 400 V / 50 Hz With dust protection housing self-construction No further documentation available Transport dimensions approx. 1100 x 600 x 2100 mm LWH Weight approx. 75 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2011, operating hours: 11,500 h, According to our "General Terms and Conditions of Sale and Delivery," and without any warranty or guarantee, we are pleased to offer you the following vehicle today on a non-binding basis, subject to prior sale, errors, and typographical mistakes: Liebherr A 904-2 C-Litronic Wheeled Excavator with Cab on Rails Knedpfx Agjxpp Sre Noc Year of manufacture: 2011 Operating hours: 11,500 Max. speed: 20 km/h Permissible total weight (GVW): 25,000 kg Axle load per axle: 13,500 kg Engine: 6,259 cc diesel Output: 105 kW / 141 HP Full-service maintenance manual available Safety inspection valid until 01/2026 Electrical rotary manifold in slewing ring renewed in 2025 Right-hand lift cylinder piston rod renewed in 2025 Alternator renewed in 2025 Slew drive renewed in 2025 Air conditioning overhauled in 2025 Wheeled excavator Tyres: 10.00-20 twin tyres, approx. 40% remaining tread 2 x wheel chocks Tow hook plus front and rear access steps 4 x hydraulic outriggers Movable cab Large storage box on undercarriage Rear-view camera Air conditioning Heating Roof window with roller blind Central lubrication system Good overall condition Price: €53,500.00 (net) All information provided without any warranty or guarantee. Our "General Terms and Conditions of Sale and Delivery" apply. The place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court of Ludwigslust; for higher dispute values, the Regional Court of Schwerin shall have jurisdiction. Subject to error, typographical mistakes, and prior sale.

Condition: good (used), functionality: fully functional, Year of construction: 1994, Equipment: all wheel drive, hydraulics, HIAB 125-2 Year of manufacture: 1994 Ksdpfsxhfp Dsx Ag Nenc - 2x hydraulic extensions - 2x manual extensions - Lifting capacity: 6,000 kg - Working radius: 11.9 m - Load capacity at maximum outreach: 830 kg You are welcome to contact us for further information and pictures via WhatsApp. (WhatsApp, Telegram, Viber, Signal) Trade-in possible! Price is net. We can transport your vehicle directly to the ports of Hamburg, Kiel, Bremerhaven/Cuxhaven, Lübeck in Germany, or Antwerp/Belgium and Amsterdam. We can ship the vehicle worldwide for you! Export license plates available upon request! We support you with export formalities, original data certification for country homologation, supplier's declaration, preparation of export documents and customs license plate production, if required. Viewing and test drive possible at any time, including weekends, by prior telephone arrangement! Disclaimer: The buyer is responsible for independently verifying the condition, dimensions, and equipment of the goods/vehicles. All information provided without guarantee. Subject to change, prior sale, and errors excepted.

Condition: used, functionality: fully functional, mileage: 168,843 km, power: 316 kW (429.64 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x2, maximum load weight: 11,440 kg, empty load weight: 14,560 kg, tire size: 385/65 R 22,5 u. 315/80 R 22,5, fuel: diesel, wheelbase: 4,800 mm, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air/air, loading space volume: 16 m³, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, onboard computer, parking heater, retarder, soot filter, traction control, trailer coupling, Vehicle number #30631 Euro VI Cab M 6 x 2 axle configuration Wheelbase: 4,800 mm Retarder Full air suspension Tyres: 385/65 R 22.5 and 315/80 R 22.5 Dinkel body, internal dims.: 6,600 x 2,480 x 1,000 mm Headboard: 1,900 mm 400 l fuel tank Differential lock TipMatic Air conditioning Parking heater PTO (power take-off) Palfinger PK 20501 L TEC loading crane, 1,002 operating hours Palfinger stone clamp PZS Rotator 2-stage hydraulic outriggers Lift axle Steering axle A3 Cruise control Traction control AHK Rockinger (trailer coupling) Duomatic and standard air connections Heated air-suspended driver's seat MAN Media Truck Advanced radio Navigation system Multifunction steering wheel On-board computer ACC adaptive cruise control Lane Guard System IV ESS emergency brake signal Emergency Brake Assist 2 ESP Hill start assist Reversing camera Front camera (right) Exterior frame 2x toolboxes Fire extinguisher box 2x sunblinds Roof hatch RIO box Efficient Roll Diesel particulate filter Sun visor Axle load indicator Fog/work lights Cornering light LED daytime running lights Beacon lights Knjdpfx Agexpwxte Noc Reverse warning system Electric window lifts, 2x Electric/heated exterior mirrors Leasing or financing available on request!!

Condition: good (used), mileage: 51,000 km, lifting height: 56,000 mm, Year of construction: 2014, operating hours: 4,280 h, Drivetrain Drive: Wheel Make of engine: Daf Weights Empty weight: 58.820 kg Functional Length of jib: 5 m Lifting capacity: 9.000 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Identification Serial number: XL9AT5003E0251155+599087 Other information Tyre brand: Michelin Maximum lifting capacity at end of jib: 1900 kg Knodpjxdhhhefx Ag Nec Hook height horizontal jib: 3200 cm Hook height luffed jib: 5600 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Carrier engine: MX375 Upper engine: John Deere 4045HF475 Counterweight: 10380 Transport dimensions (LxWxH): 15,43x3x4 Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: reconditioned (used), Year of construction: 2008, power: 250 kW (339.91 HP), Mobile shredder ARJES VZ 750 E Electric drive: 250 kW Discharge conveyor Overband magnet Kedpfxjxf Aqts Ag Nsnc

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg Kjdpfxjxn Tilo Ag Nsnc To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2024, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Ksdpfexf Dikjx Ag Njnc Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, mileage: 92,300 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: mechanical, wheelbase: 3,665 mm, overall weight: 3,500 kg, empty load weight: 3,065 kg, maximum load weight: 435 kg, first registration: 12/2011, loading space length: 3,500 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, emission class: euro5, driver cabin: other, suspension: steel, fuel: diesel, machine/vehicle number: 2020110210, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, We offer you customized lightweight box bodies on new or used low-frame chassis in various body lengths. The body and interior are always customized to your individual needs, from function to design. We produce ourselves and in Germany. Our many years of experience and our wide-ranging service offer you a great deal of flexibility in the implementation of your idea. Every project has its own ID. VW Crafter 2.0l 2011 Euro5 3500Kg First registration 21.12.2011 Mileage 92.300 km Fuel Diesel kW/hp 100/136 Manual gearbox 6 gear ccm 1,968 cm³ Kjdjf D Rdtopfx Ag Nenc Sales body is NEW, unused and with a large sales hatch across the entire width of the vehicle, 2-seater, driving license class B, rear running board, LED lights, reversing camera. Box body made of 25 mm GRP sandwich element Superlight with alcove. Rear door single-leaf 700 x 0 mm. Floor made of non-slip industrial floor panel R11. Exterior LED lighting in accordance with road traffic regulations and EU regulations. Interior dimensions WD 3800 x 2250 x 2300 mm Side flap WxH 3570 x 1480 mm Permissible total weight 3,500 kg Unladen weight 3,065 kg Interior is NEW!!! Left side: Commercial refrigerator with glass door, convection cooling Underframe for table-top appliances with sliding door, gas hob-2 burners 8.5 kW gas griddle plate Glatt 8 kW gas double deep fryer 2 x 8L 12.5 kW electric bain marie 2 kW wall-mounted hood 2200 incl. extraction, grease drain tap, flame protection filter, heat protection wall and lighting Gas cylinder cabinet for 4 x 11 kg, pressure regulator, gas pipe and gas test certificate Right-hand side: Serving table with sliding doors and stainless steel worktop 900 serving station with hinged lid 254L double sink with shelf incl. fresh and waste water tank, boiler Chalkboard with wooden frame LED illuminated Further equipment: Shelf above the sales hatch, folding bag shelf at the sales opening. 2 LED panels on the ceiling and 3 dimmable LED spotlights above the sales counter. Plenty of storage space. Standard electrical installation 380 volt/16A, power socket in accordance with CEE standard, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price ¤ 63,920.00 plus 19% VAT Subject to errors and prior sale.

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Knodpfjvnmmzsx Ag Nec Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, machine/vehicle number: 15149, Technical data: - Manufacturer: Schuko - Type: VACOMAT 300 V23 Automatic fan start-up when starting up to 8 machines. - Year of manufacture: 2003 - Connection diameter DN300mm - Volume flow: min. 5083 m³/h, max. 5,800 m³/h - Motor power 7.5 kW - Pre-fuse 15 A - With automatic pneumatic filter cleaning - Water extinguishing device Knedoxf Ircopfx Ag Noc - 4 chip bins with clamping brackets - Level gauge for chip bins - Compressed air: 8 bar - 400/50 Hz - Length: 3.510 mm - Width: 1.590 mm - Height: 2.550 mm - Weight: 936 kg - Location: in stock in 32825 Blomberg

Condition: reconditioned (used), Year of construction: 2018, operating hours: 6,070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 - Operating hours: 6,070 - Engine: Mercedes MTU, 630 HP - AdBlue - Remote control - Hydraulic drive (self-propelled) Ksdpjxmvn Ijfx Ag Njnc - Weight: 25,000 kg Machine has been workshop overhauled and is immediately available.

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Kodexnqauspfx Ag Nsnc Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, 1 FPT mobile column milling machine type SIRIO M year 2003 CNC TNC 430 HEIDENHAIN 6000X, 2000Z, 1200Y HEAD Knedpfx Ajw Rfxfsg Nsc COMPLETE MACHINE COMPLETE TOOLING

Condition: like new (used), ‼️IN STOCK – CAN BE INSPECTED ON SITE IN GEMMRIGHEIM‼️ Demonstration unit – Mobile crushing plant for flexible use on confined construction sites, in gardens, or for demolition work inside buildings. With a width of just 75 cm, it can pass through doorways. Tear down walls or break up concrete stairs – crush immediately and transport out with small containers or conveyors (which we also have available). In our tests, we even used gravel. We are happy to send an actual buyer a video. Crush stone or concrete on site and save money. Instead of disposing of concrete with rebar, you can sell the crushed material and steel. At our unbeatable price, the plant pays for itself quickly and continues generating profit. Spare parts are fully available. Decades of proven performance, extremely robust, and very fuel-efficient. ▶️ Throughput: 100 kg up to 10 t per hour ▶️ Diesel engine ▶️ Length with extended conveyor: 260 cm ▶️ Width: 75 cm ▶️ Height: 155 cm ▶️ Feed opening: 70 x 140 cm ▶️ Crusher inlet: 20 x 40 cm ▶️ Weight: 1,300 kg Net: €9,900 + 19% VAT €1,881 Gross: €11,781 Subject to errors. Images/descriptions may differ. Kedpfsxp Sbvsx Ag Njnc

Condition: not inspected (used), functionality: unexamined, Used Cleanroom Mobile Scaffold Two Platform Heights: ~1.29 meters ~2.29 meters With manual. For indoor use only. Max 250kg per work platform. Knjdpfxsxiv Hio Ag Nec

Condition: used, Year of construction: 2003, machine/vehicle number: 15149, Technical data: - Manufacturer: Schuko - Type: VACOMAT 300 V23 Automatic fan start up when starting up to 8 machines. - Year of manufacture: 2003 - Connection diameter DN300mm - Volume flow: min. 5083 m³/h, max. 5,800 m³/h - Motor power 7.5 kW - Pre-fuse 15 A - With automatic pneumatic filter cleaning - Water extinguishing device - 4 chip bins with clamping brackets - Level gauge for chip bins - Compressed air: 8 bar - 400/50 Hz - Length: 3,510 mm - Width: 1,590 mm - Height: 2,550 mm Knjdpfx Agexf Iq Ss Njc - Weight: 936 kg - Location: in stock in 32825 Blomberg

Condition: excellent (used), Year of construction: 2022, operating hours: 135 h, functionality: fully functional, overall weight: 24,740 kg, transport width: 2,540 mm, transport length: 9,141 mm, transport height: 3,604 mm, power: 260 kW (353.50 HP), Equipment: Basic package Inventhor Type 6 - Load-sensing system - 500-liter fuel tank - Longitudinal discharge conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24V electrical control system – additional electric pump for the following functions when the engine is off: "Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper" - Complete radio remote control - Large side GRP maintenance doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear Knedpjxd T Hcsfx Ag Nec - Hydraulically reversible fan wheel - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Audible start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Optional equipment: - 260 kW drive train – electric variant - 3-axle drawbar chassis unit - Shredding system size L – 20 teeth - Size L limiter - Additional hydraulic connections 35–80 l/min - Hydraulic travel drive - 350 mm hopper extension, water spray system on both sides - 7 m rear discharge conveyor - Neodymium overband magnet - 7 m frame for overband magnet Delivery date to be agreed upon

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Knodpfx Agsxnprco Nec Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 35.02.003.16, Fully functioning and comes with loads of extras: Ducting, automatic valves and automatic control unit. Clean air dust collector RL 300 Extraction connection 300 mm on the right (can be converted to the left) Nominal volume flow 6000 m³/h, H3 "GS dust tested, JET cleaning Knodpfxsxpgq Ej Ag Nec Compressed air connection 3/4 inch Connection pressure 7-12 bar with 50NL/min Operating pressure in the device 6 bar Chip container capacity 2x210l Extinguishing device with water connection For the extinguishing device, the clean air extraction unit must be connected to the domestic water supply. - The extinguishing device must be connected to the domestic water supply 1/2" with at least 4 bar. - The minimum water pressure after triggering must be 1 bar. - The connecting line between the fixed piping and the machine must not exceed 1 m and must not restrict the flow rate. Cartridge filter standard RL300

Condition: good (used), Year of construction: 2008, cutting length (max.): 6,100 mm, height adjustment type: electric, +Mobile Bandsaw Wood-Mizer LT70+ *Cutting length 6.1 m *Turbo diesel engine 42 HP *Cutting thickness computer Accuset *Band lubrication system Lube-Mizer *Electric height adjustment *Electric feed *Chassis (2,500 kg) with road approval *Debarker +Hydraulic Package 7+ *Log loader *Log turner *Side supports Kedpfx Aow Dt A Heg Nenc *Outfeed rollers *Central clamp *3 hold-down clamps *Radio remote control Max. log diameter 95 cm Max. diameter between rollers 73 cm Max. cutting width (cant) 64 cm Max. cutting height above blade 39 cm Max. cutting length 6100 mm (reinforced bed) Incl. approx. 50 saw bands.

Condition: used, mileage: 175,334 km, power: 100 kW (135.96 HP), gearing type: mechanical, fuel type: diesel, color: green, overall weight: 7,500 kg, empty load weight: 7,450 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 3, first registration: 09/1996, emission class: none, brakes: engine braking, suspension: steel, Year of construction: 1996, driver cabin: day cab, wheelbase: 2,600 mm, Equipment: all wheel drive, cabin, crane, differential lock, head guard, power assisted steering, trailer coupling, * German vehicle * 1st hand * Only 175,334 km original * Condition, see photos * Schaeff telescopic excavator type AT16 * With the Schaeff Knickmatik, the hydraulic, stepless side adjustment of the boom axis by 925 mm each to the left and right Kedewq Sxmopfx Ag Nenc * Central control of all hydraulic functions from the comfort excavator seat * Powerful and fast working movements thanks to dual-circuit hydraulics * Max reach of 6.40 meters and payload of 1,300 kg with standard bucket * Digging depth with telescopic bucket 3.60 meters * Slewing range 360° * Operating pressure 180 bar * Hydraulic system 34kW / 46 hp * 1 hydraulic extension * 4 hydraulic supports * Trailer hitch * Trailer hydraulic connections * Permitted trailer load: 24,000 kg * 3 seats * Differential lock * Sunroof * Comfort driver suspension seat * Engine brake * Rotating beacon lights * Towing coupling in front * 8-speed manual transmission * GVWR: 7,500 kg * Wheelbase: 2,600 mm If a new TÜV inspection is desired, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods so that the buyer does not get a false impression of the condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly welcome. All information is without guarantee. No liability is accepted for errors or incorrect details in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: ready for operation (used), functionality: fully functional, Sell mobile sludge thickener made of stainless steel. Machine is available 2 x. Ksdoqy H Acopfx Ag Nonc Please contact us if you have any questions.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down Knsdpfjxdwiuox Ag Njc

Condition: used, For sale: Schuko Vacomat 200P, year of manufacture 1999, from a well-maintained workshop environment. The unit runs flawlessly and is ready for immediate use—ideal for woodworking shops, joineries, or CNC workstations with high chip and dust volumes. 🔧 Technical Data: Motor power: 3.7 kW (400 V three-phase) Airflow: approx. 2,500 m³/h Negative pressure: approx. 2,800 Pa Filter surface area: approx. 14.5 m² Inlet diameter: Ø 200 mm Chip collection containers: 3 × 160 l, individually dischargeable Filter cleaning: pneumatic (compressed air pulse) Dimensions (L × W × H): approx. 2,600 × 900 × 2,100 mm Weight: approx. 350 kg Sound pressure level: approx. 75 dB(A) ✅ Condition: Fully operational, ready for immediate use Regularly serviced Normal age-related signs of use 📦 Special features: Pneumatic filter cleaning – maintains constant suction performance Large filter surface for efficient extraction Three separate collection bins – easy to empty Mobile & compact – flexible use in the workshop Proven, durable Schuko quality "Made in Germany" Knodpfx Agjxn Nu Dj Nec 💶 Price: negotiable 📍 Location: Haldensleben 🚚 Collection preferred, transport or shipping available by arrangement