Used Mobile Sand Blasting Machine for sale (69,157)

Year of construction: 1995, condition: excellent (used), Höfer edge grinding machine Grinding belt dimensions: 3000 x 200 mm Nljdpjlnalfefx Ag Tjc Oscillating grinding belt Veneer grinding attachment Mobile CE compliant

Condition: good (used), Year of construction: 2002, Brand: MABO Type: Participate Machine no: 76 Year of manufacture: 2002 - Long belt sander with electric raising/lowering of the work table, sanding shoe Tech info: Work table 2000x800mm Nljdpfxjpitqms Ag Tjc Sanding belt dimension 6060x150mm 2 speeds on the sanding belt Size for transport: Length: 320 cm Width: 130 cm Height: 160 cm Stock no: 2001159BXM

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, Brand: DMC Model: Europa 90 Year of manufacture: 1981 Tech. info: Roller abrasive belt motor: 15 HP - 2 poles Pad abrasive belt motor: 7,5 HP - 2 poles Conveyor belt motor: 1,5/0,8 - 4/8 poles Two feeding speeds: 7-14 m/min Roller abrasive belt speed: 21 m/sec Pad abrasive belt speed: 10 m/sec Roller abrasive belt length: 2200 mm Pad abrasive belt length: 2200 mm Roller and pad abrasive belt width: 950 mm Max. size of work-piece: 900 x ≠100 x > 200 mm Min. size of work-piece: 40 x ≠ 2 x 200 mm Min. operating pressure: 5,5 Atm Compressed air consumption: 300 l/min Diameter of suction hood (roller belt): 200 mm Nedpfxsrbyrps Ag Tolc Diameter of suction hood (pad belt): 200 mm Average speed of dust exhaust system: 25-30 m/sec volume of sucked air (roller belt hood): 3150 cu.m/h Volume of sucked air (pad belt hood): 3150 cu.m/h Overall size: 1675x1625xh=2096 mm Weight: 2030 kg Weight of the machine without pad: 1630 kg Stock no: 2001933

Condition: used, functionality: fully functional, machine/vehicle number: 30841202, infeed width: 480 mm, MBO "Z2" Mobiles Folding Unit, Knife Folding Unit Usable for MBO folding machines as well as other brands. Swivelable 180 degrees, thus folding with the knife is possible from above and below. Maximum feed width 48 cm, up to 150 cycles/min. Nlodpjwptycjfx Ag Tsc

Condition: new, Year of construction: 2024, table length: 1,450 mm, table width: 500 mm, overall weight: 550 kg, input voltage: 400 V, oscillation stroke: 20 mm, input frequency: 50 Hz, OBS 150 ARCO edge sanding machine. NEW. Sanding height 150 Oscillation stroke 20 mm Machine length 1450 mm Front side of the processing side is curved Table spread (adjustable) Rear side for straight processing. Table tiltable up to 45 gr. Motor power 2.5 kW, 2 speeds. Sanding speed 11.5 and 8 meters/sec. Central extraction Diam 140 mm. Pneumatic tensioning of sanding belt. Njdpfxor Erhws Ag Tolc The machine is very suitable for staircase manufacturers.

Condition: defective spare-parts repository (used), Surface grinding unit on the left, roller diameter: 100 mm Grinding belt length: 950 x 100 mm Horizontal/vertical table support: 120 x 180/10 x 250 mm Contact grinding wheel on the right, 200 mm diameter, grinding belt dimensions: 50 x 2000 mm 2 spindle speeds thanks to pole-changing motor: 11450/2900 rpm Nledjwvt I Hopfx Ag Tec Drive motor: 380 V, 0.9/1.3 kW Space required: 1000 x 400 x 1800 mm Weight: 140 kg

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 4/3509, power: 2.2 kW (2.99 HP), Model: LZK 3/4. Machine No.: 4/3509. Belt dimensions: 150 x 2600 mm. Feed unit: Masterwood type MEC 8V. Main motor: 2.2 kW. Oscillation motor: 0.18 kW. Nlodpfx Agey Nz H Do Tec

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: VO995, total length: 1,700 mm, total width: 1,000 mm, total height: 1,150 mm, table length: 880 mm, table width: 370 mm, overall weight: 260 kg, power: 2.2 kW (2.99 HP), grinding width: 150 mm, grinding length: 2,580 mm, Machine type: LVO 120, Machine number: VO995, Year of manufacture: 2009, Main motor: 2.2 kW, Oscillating motor: 0.11 kW Nlsdpsy Nznusfx Ag Tsc

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Nodpfxoitvkuo Ag Tolc Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Nlsdpfod E Ixzjx Ag Tjc Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Technical data: Working width mm 1,350 Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Nsdpfxjhtuvro Ag Tolc Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Nlsdpfx Aouxqzuog Tec Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm Nledett Da Djpfx Ag Tjc CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Nlodpfoy H N Tmsx Ag Tec Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 101780, total length: 4,300 mm, total width: 720 mm, total height: 1,390 mm, type of input current: three-phase, input voltage: 400 V, feed rate X-axis: 6 m/min, power: 8.4 kW (11.42 HP), We offer this used Rehnen KBA edge sanding machine, year of construction 2008. Manufacturer: Rehnen Model: KBA Year of Construction: 2008 Condition: used Category ID: 826 Type ID: 94 Nlsdpfjyvfwrox Ag Tjc Type: edge sanding machine Aggregates total: 5 Moulding aggregates: 2 Sanding aggregates: 3 Workpiece width min mm: 60 Workpiece thickness max mm: 90 Feedrate max m/min: 6 Aggregates oscillating: Yes Sanding belt: Yes Profile sanding pad: Yes Milling aggregate vertically scanning: Yes Stepless rotational speed control: Yes Clamping system: Upper pressure rolls Jump-in control: pneumatic CE marking: Yes Total connection kW 6,50 Required space LxWxH mm 4300x720x1390 Availability short-term, ex location customer! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 9,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 1,000 mm, CME TRAVELING COLUMN MILLING / BORING MACHINE CME TECHNICAL FEATURES - VISIBLE IN OPERATION Brand: CME Model: MB 9000 Year: 2007 CNC: Siemens Sinumerik 840D Njdpfx Agou R Rk Hs Tjlc X-axis: 9000 mm Y-axis (Vertical): 4000 mm Z-axis: 1000 mm W-axis (Ø 150 mm): 700 mm 2 rotary translation tables (linear travel: 2000 mm) 2500 x 2500 mm (25 TN) capacity Heidenhain optical scales on all axes Direct spindle 90-position tool change ZF range change Internal coolant Chip extractors

Condition: excellent (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotating tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotating table. The machine is equipped with two rotating tables. Rotating table diameter – 1400 mm Maximum product height – 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours – 5275 Commissioning date: 03/31/2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blasting wheel, number and type: 2 WX1M External diameter of blasting wheel: 330 mm Blasting wheel speed: 2900 rpm Amount of abrasive material thrown per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Nsdpfx Agoy Uc Iao Telc Rotating table diameter: 1400 mm Rotating table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 1500 kg

Condition: new, Year of construction: 2025, We offer a new table blasting machine – high-quality Czech production, made using premium materials. Model – TS 330/1. - Diameter of rotary table – 1000 mm. - Maximum height of blasted part – 550 mm. Nljdpowt T Uzefx Ag Toc - Overall machine height – 2750 mm. - 1 blasting wheel – power input – 5.5 kW. - Bucket elevator – power input – 0.75 kW. - Table rotation – power input – 0.75 kW - Total machine power input – 7 kW. We also manufacture table blast machines with table diameter – 1500 mm. Equipment with frequency inverter – regulating the rotation speed of the blasting wheel. A major advantage of the machine is the ability to change the turbine’s rotation direction to right or left. Blasting equipment comes with CE certification. Further advantages include high blasting efficiency, quiet operation, low energy consumption, and minimal space requirements for installation. Within its category, thanks to its design, this table blast machine can be considered highly advanced. (Sandblaster, sand blasting, shot blasting, sandblasting machine, blasting machine, blast cleaner). Blast machine.

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm Nsdpfx Agjxrb Rfe Tjlc - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW - With vacuum conveyor belt Nedovwa Drjpfx Ag Tjlc - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa Nedpfxjx Ex Tms Ag Tslc - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x760x1160 mm Weight 230 kg Total power requirement 3,5 kw Nljdpfx Aevz Hnrsg Tjc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1720x950x1260 mm Weight 250 kg Total power requirement 3,5 kw Nlodjvz Hkgspfx Ag Tec

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1600x1500 mm Weight 540 kg Nledpfx Agevz Hgno Tjc Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1320x700x1120 mm Nlodpfx Agevz Hmzj Toc Weight 125 kg Total power requirement 1,5 kw