Used Morbidelli Author 600 for sale (53)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Todexy Tmnopfx Am Tsa

Condition: used, functionality: unexamined, Ferwood Code: RU0002781 - Manufacturer Code: 2734022833D - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Tjdpfx Amev D Hzdo Tea

Condition: used, functionality: unexamined, Ferwood Code: RU0002782 - Manufacturer Code: 2734022850L - Condition: Used - Functionality: Not tested - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Tedpfx Amsv D H Abs Toa

Condition: excellent (used), Technical specifications: • Working area: 3660 × 1550 × 150 mm • Part passage: 150 mm • Electrospindle 13 kW, HSK 63F • Speed range: 1,500–24,000 rpm • Drilling head: 7 vertical spindles Tjdpszl Taxefx Am Tea • Tool magazine: 10 positions • Multi-functional aluminum table with 8 vacuum zones • 2 vacuum pumps 250 m³/h (total 500 m³/h) • SCM Xilog Maestro control system • Centralized automatic lubrication • Electrical cabinet air conditioning

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3110 mm Working area Y: 1620 mm Working area Z: 180 mm Tedozltgrjpfx Am Tja 3-axis electrospindle, 9.5 kW Vertical drilling spindles: 13 Horizontal drilling spindles X: 6 Horizontal drilling spindles Y: 4 Blade for grooving in the X direction 14-position tool changer on the machine side Approx. 14-position tool changer on the machine side Work table with 6 supports Laser positioning device for suction cups with Maestro CNC and Xilog Plus Panel Mac Touchscreen operator console SCM eye-M PRO-SPACE safety system 1 vacuum pump at 90 m3/h Weight approx. 3800 kg Includes door routing unit

Condition: used, machine/vehicle number: 005448, Max. panel width: 3000 mm Max. panel length: 1350 mm No of injectors: 24 Todpfx Amewcydze Toa

Condition: used, machine/vehicle number: 005446, X axis working area: 3000 mm Tedpfxewuciqs Am Toa Y axis working area: 1300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 112

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Tedpfx Amsyngzve Toa Total number of drilling spindles: 18 Total number of tool changer positions: 20

Condition: used, machine/vehicle number: 005449, Position 1: Panel Tipper MORBIDELLI-FLEXA 912+FLEXA 902 Position 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902 Tsdpfx Amswucl Eo Tja

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Tsdpfx Amozi Tytj Tja Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: AA100001570, functionality: fully functional, travel distance Z-axis: 180 mm, table length: 5,510 mm, table width: 1,620 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC Tedpjxmgr Rjfx Am Tea MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm Tjdpfx Aszdfhasm Tsa 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: ready for operation (used), Operation in X, Y, Z axes Horizontal drills on X-axis – 10 pcs Horizontal drills on Y-axis – 2 pcs Tjdpjx An Avofx Am Tsa Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Year of manufacture: 1992

Year of construction: 2013, condition: excellent (used), Technical design: Console table 3050 x 1200 mm with 6 consoles that can be manually moved, each console with 2 vacuum suction cups and one pneumatic excavation rail. Dot laser positioning aid, vacuum pump. Control system: CNC XILOG Plus. Main spindle: 8.5 kW (12 HP) HSK 63F with C-axis, 1500 – 24,000 rpm. Tjdokqyizjpfx Am Toa Tool changer: rotary tool magazine, 12 positions. 1 adapter unit with pivoting saw. Drilling head with: 12 vertical spindles, 4 + 2 horizontal spindles, nut saw. Bumper safety system. The tools, HSK tool holders, drills, etc., shown in the images are not included in the scope of delivery!

Condition: used, Year of construction: 1991, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 40 mm, overall weight: 4,000 kg, Taper: PS25 CNC control Tria 6000 Motor power 5.5 kW There are 4 pieces available Tsdpfx Amoua Arfs Tja

Condition: new, Year of construction: 2024, Morbidelli M200 CNC CONTROLLED MACHINING CENTER - C.E. Safety instructions - Morbidelli m200 3715x1620 Z250 - Volt 400 EU - Frequency 50 Hz - PRO-SPACE safety devices - Plate passage Y 2200 mm - Retractable safety belts - "TECPAD wired" remote control with 7" touchscreen monitor - Tool changer TRB14 (version Y=1620) - Tool changer FAST14 - 1 vacuum pump, output 250/300 m³/h at 50/60 Hz - Central optimized suction nozzle on rear drilling head - Drilling unit with pneumatic vertical positioning (single Z-axis) - RO.AX F31LTC drilling unit - Suction hood for drilling unit - Drilling unit with inverter - Pressure booster - 5-axis unit "Prisma 5" version "KT" - Suction hood for 5-axis electrospindle - 7-position extraction hood for 5-axis electrospindle - Device for liquid cooling (air type) - 6 "TV FLEXMATIC" work tables 1600 - Conveyor belt for chip and remnant removal for X=3710mm - Removable chip collection container at the end of the machine frame - Sensor for reading the tool length - 4 devices for loading aid H=75 1600 - Front stops H=75 for 6 supports - 12 x fixed suction cups 145x145 H=75 mm - 6 x rotary suction cups 145x55 H=75 mm - Preparation for clamping cylinder for 6 supports TV FLEX / TV FLEXDRIVE / TV FLEXMATIC - Maestro connect: service contract for 1 year (kit gateway "plug&play" included) Todpfsu Illmjx Am Tsa - SCM DIGITAL SOLUTIONS: MAESTRO CONNECT - Human-machine interface software (HMI) MAESTRO ACTIVE - Machine user interface software Maestro lab - Hardware key for Maestro - Additional hardware key for Maestro (for USB slot) - Mobile operating console "eye-M TOP" - TELESOLVE remote maintenance via the Internet - Mobile control unit with 6.5 m cable length - S-N-D 3-position selector switch - MACHINE LANGUAGE: German - incl. delivery, 3 days training in advance, 1 week installation and training - New machine is still in original packaging

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: Tsdpfeh T Dvtex Am Tea KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, production capacity: 1,500 unit/h, TECHNICAL DETAILS Minimum panel width: 250 mm Maximum panel width: 3,000 mm Minimum panel length: 100 mm Maximum panel length: 900 mm Minimum panel thickness: 12 mm Maximum panel thickness: 60 mm Tjdpfeyzn Sdox Am Tea Maximum panel weight: 50 kg Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 split lower vertical drilling heads, automatically adjustable with NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (per side), independently arranged on two levels External reference: MMA004.003

Condition: ready for operation (used), functionality: fully functional, workpiece weight (max.): 50 kg, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, TECHNICAL DETAILS Panel width min.: 250 mm Panel width max.: 3,000 mm Panel length min.: 100 mm Panel length max.: 900 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Maximum panel weight: 50 kg Tedpfeyzn D Tox Am Tsa Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 EQUIPMENT EASYTOOL software 5 segmented lower vertical drilling heads, automatically adjustable via NC control, each with 26 independent spindles 3 segmented upper vertical drilling heads, automatically adjustable via NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (each side), independently arranged on two levels External reference: MMA004

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: AL/008514, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, workpiece height (max.): 60 mm, overall weight: 2,800 kg, controller model: PC mit Xilog Plus Software, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Workpiece thickness (processable): 60 mm Upper drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Lower drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Todpfx Amoydl Ads Tja Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW MACHINE DETAILS Control: PC with Xilog Plus software Weight: 2,800 kg EQUIPMENT Panel clamps Manual workpiece loading on Flotex table Automatic workpiece unloading Automatic central lubrication

Condition: good (used), Year of construction: 2018, machine/vehicle number: AB00004121, functionality: fully functional, operating hours: 5,581 h, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 65 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 95 mm, workpiece weight (max.): 50 kg, number of axes: 6, number of slots in tool magazine: 6, controller manufacturer: NUM, actuation type: pneumatic, total height: 2,450 mm, total length: 4,680 mm, total width: 2,225 mm, overall weight: 2,343 kg, table length: 1,350 mm, Equipment: CE marking, documentation/manual, We are offering this well-maintained Morbidelli CX200 vertical woodworking centre, year of manufacture 2018. Manufacturer: Morbidelli Model: CX200 Year of manufacture: 2018 Condition: good Tsdpfxey E N E Ho Am Toa Category ID: 2502 Type ID: 4257 Machine type: Vertical woodworking centre If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2009, condition: ready for operation (used), Main Drive Number of axis 3 Tedex Nr Uropfx Am Tea This 3-axis MORBIDELLI UNIX KBT was manufactured in 2009. It features a CNC control system, a working area of 3000 × 1000 mm, and a maximum panel thickness of 60 mm. Equipped with multiple drilling and milling units, including 24 vertical and 4 horizontal spindles, it also has a fixed saw unit and supports both manual and automatic panel handling. Consider the opportunity to buy this MORBIDELLI UNIX KBT CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs Todpfx Amsgb D Afe Tsa horizontal heads L + P- 2 pcs The second drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Line availability August 2021

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: CNC drilling and milling center Morbidelli Uniflex S (SCM Group), year 2017, serial number AA2/004505. Weight 4,450 kg, power supply 400V/3-phase, 46A/50Hz. The machine is in working condition. Contact us for more information and price. Tjdpfx Amoy N Tmpe Tsa

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Tsdpfx Aoxg Izaom Tea Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.