Used Muhr for sale (16)

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Gjdpfx Agjxf Utao Nskc Good condition

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Ø 40 in 22 mm throat 500 mm Max. hole diameter 80 mm Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching 16 mm Godpfx Aslzc Dceg Nskc Motor power 8 kW Weight 5500 kg

Condition: used, Year of construction: 2004, punching pressure 40.0 t square edge steel 28.0 mm L-beam 80 x 8.0 mm round bar steel 30,0 mm punch diameter 30 in 10 mm square material 28 x 28 mm shear: flat material 150 x 10 oder 100 x 15 mm adjustment of stroke 35.0 mm strokes per minute max. 24 H/min. voltage 400 V weight 1020 kg dimensions 910 x 670 x 1930 mm from a maintenance workshop well-maintained condition (!!) Equipment: - electro-hydraulic profile steel shears - punching station, flat steel shears, angle steel shears, profile steel shears - stepless adjustment of the stroke - very compact design - support table at the notching and punching station - various MUBEA punches + dies - flat steel station with manual material hold-down device Godpfjxau Uaex Ag Njkc - protective devices at work stations - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Gkodpfx Agjvvx E So Njc weight of the machine ca. 1 t

Condition: refurbished (used), functionality: fully functional, Year of construction: 2004, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, product height (max.): 15 mm, Mubea / Muhr and Bender KLH 500 / 610: - hydraulic hole punch - Punching force 50 to - stroke 60 mm - punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 in 4.5 mm - throat depth 610 mm - with support table Special tools and devices on request. Trade-in of used machines. Gkodpfxsvdiduj Ag Nec Europe-wide delivery possible.

Condition: good (used), Mubea Muhr und Bender section shear combined Gksdpsncc Hujfx Ag Nec Type: KBL 16 Dimensions: 200x75x197 cm LxWxH

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Gsdpfx Agjfkmr So Nokc Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Completely refurbished machine

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: Gksdpfx Ageu Id Ruj Nsc - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport Gkjdjxaaipepfx Ag Nec - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz Gksdpfondz Npex Ag Nec combination machine ja extensive accessories ca. 50 Sätze pressure 50 t

Condition: reconditioned (used), punching force: 100 t, sheet thickness steel (max.): 40 mm, Mubea / Muhr and Bender hole punching machine VP1000 - Hydraulic hole punch with CNC coordinate table - 5-punch tool with quick-change system and automatic punch selection - Punching force: 100 tons - Throat: 620 mm - Stroke: 60 mm - Punches up to: Ø 40 in 20 mm Ø 10 in 30 mm - Max. plate size: 1200 x 750 mm - Max. plate thickness: 40 mm - Travel speed 21 m/min Godpfxjvl Hx Es Ag Nekc Special tools and devices on request. Trade-in of used machines. Delivery possible throughout Europe.

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Godpfxju Ickyo Ag Nekc Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears Gjdpfoqfgy Hox Ag Nskc - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Gkedpfjium Eujx Ag Nec Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg Gkodpjwnhd Hsfx Ag Njc - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 77480, Single-knife high-performance guillotine cutter PERFECTA 115 SE 18.5" touchscreen – color display Virtually unlimited storage capacity (approx. 20,000 - 40,000 programs possible) Technical data: Cutting width mm 1150 Insertion height mm 165 Min. residual strip mm 20 Gsdpfx Asxl Uxveg Nskc Clamping force kN 2.5-45 Main drive power kW 4.0 Table height mm 870 Net weight kg 3200 Includes machine tool spare knife, documentation