Used Multi Function Excavator for sale (31,588)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Pgjdoxrtb Nepfx Adiow Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: used, total length: 10,500 mm, Year of construction: 2016, load capacity: 14,000 kg, Trailer Multi-Trans VAL 30 Drive No Drive Year built 2016 Lifting weight (kg) 14,000 Pgjdpjxd Edmofx Adisw

Condition: good (used), Year of construction: 2017, conveyor belt length: 7,100 mm, conveyor belt width: 2,500 mm, Double steering Wheel diameter Platform size 7100 x 2500 mm Inspection valid 11.2025 Podpfxswq N Sds Adijgw Length:7100mm Width:2500mm Height:900mm

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN Pgsdpfxoh Rkhnj Adisw SOME PICTURES AND VIDEOS AVAILABLE

Condition: ready for operation (used), functionality: fully functional, The MPFSH-075-01 Multi-Fill dosing machine is an ideal solution for the precise dosing of various food products. Thanks to its versatile design, it can handle a wide range of products, such as cooked pasta, rice, vegetables, cut fruit, surimi, chilled salads, and even cooked meats. Indeed, this machine stands out for its ability to precisely dose difficult-to-handle products while ensuring uniform distribution in different types of containers. Pjdswf D Rwjpfx Adisgw Furthermore, the machine is designed to operate efficiently, with optimized air and water consumption, reducing operating costs while ensuring consistent performance. Furthermore, its integration into a production line improves productivity and guarantees high-quality results. Furthermore, this robust machine is suitable for demanding industrial environments, offering a durable solution for the needs of the food industry. In short, the MPFSH-075-01 Multi-Fill dosing machine is essential equipment for companies looking to improve the efficiency of their dosing processes while ensuring consistent product quality. Technical Specifications: Model: MPFSH-075-01 Brand: Multi-Fill Year of Manufacture of this Multi-Fill Filling Machine: 2006 Air Consumption: 60 CPM > 80 PSI / 30-35 Cubic Feet/min / 5.5 Bar / 51-60 Nm/hour Water Consumption: 0.75 – 1 Gal/min / 2.8 – 3.8 Liters/min Total Required Frequency with Air Vacuum = 0.45 kW Products Filled: Cooked pasta, rice, cut vegetables and fruits, surimi, chilled salads in a variety of containers, cooked meats. HTwLg8C1

Condition: used, Floor cleaners, floor preparation products, floor coating Psdpfjqyi Unox Adisgw -Manufacturer: Multi Clean, floor cleaner, floor preparation agent -Types: Ultra Brite II Ultra Primer -Type/Quantity: see photo parts list -Price/tax: complete -Transport dimensions: 1200/800/H400 mm -Total weight: 138 kg

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Pgodpfx Adexrr Uhjiew Rental or sale EU-wide.

Condition: used, functionality: fully functional, In this offer you purchase a used Multi Purpose Stacker "Plockmatic MPS" Object of sale: 1 x Plockmatic MPS Type F139-101 Fits other Plockmatic finishing machines Fits various Canon / Ricoh machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). Pedpfx Adownqp Eeijgw Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping are available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, Simatic Multi Panel Touch Siemens Siemens MP 277 10-inch Touch 6AV6 643-0CD01-1Ax1 Made in Germany Stock: 2 units Condition: Used Price per unit External width: approx. 330 mm External depth: approx. 275 mm Internal width: approx. 305 mm Psdpfx Adewg Tmdeiogw Internal depth: approx. 245 mm Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system has been in operation until dismantling. Thanks to the excellent workmanship of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopes for loading and unloading your goods! We would be happy to provide you with a customized quote or advise you on design or installation issues. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of specialists. We have successfully implemented projects for companies in a wide range of industries, including logistics, the pharmaceutical industry, skilled trades, and the electronics sector. Together, we will develop ways to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or additional components such as picking racks or containers.

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. Pgodpfx Adsq Nd Rbeiow 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: used, mobile welding smoke filter, welding smoke extraction -portable -Extraction connection: 1 -Drive: 1 kW Pgodpfx Adeb A Ng Ieiew -Volume flow: max. 170 m³/h -Number: 1x available -Weight: 20 kg

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Pgjdpjuf Rw Tefx Adisw Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: used, In this offer, you are buying a used ‘Ricoh Multi Folding Unit FD5020’. Subject of sale: 1 x Ricoh Multi Folding Unit FD5020 for various Ricoh Pro models Ricoh Pro C7100 Series Ricoh Pro C9100 Series Ricoh Pro C7200 Series Podpforvhz Uox Adijgw Ricoh Pro 8200 Series Ricoh pro 8300 Series Condition: This is a used device that may show signs of use. (small scratches or yellowing). The device has been functionally tested. Packaging and shipping: You are welcome to come and see the appliance during our office hours. Please make an appointment to do so! Seaworthy packaging and worldwide shipping are available on request! For further information, please contact us personally.

Condition: excellent (used), functionality: fully functional, Equipment: UVV, cabin, For rental only! Pgsdpjxqp Icjfx Adisw

Condition: used, axle configuration: 3 axles, first registration: 07/2018, total length: 11,100 mm, total width: 2,550 mm, total height: 1,600 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional options and accessories = - EBS = Remarks = Pgjdpfx Adsxvxkdeiow Number of axles: 3, Unladen weight: 5,750 kg, Gross weight: 37,000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, ABS, EBS, Body year: 2018, Coupling positions: 2x20 + 1x30 + 1x40 + 1x45 high cube, Extendable chassis: Front / Rear, Axle manufacturer: BPW = Further information = General information Cab: Day Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Left tyre tread: 8 mm; Right tyre tread: 11 mm Axle 2: Left tyre tread: 11 mm; Right tyre tread: 10 mm Axle 3: Left tyre tread: 3 mm; Right tyre tread: 7 mm Weights Unladen weight: 5,750 kg Payload: 31,250 kg Gross weight: 37,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical inspection): valid until 09.2026 Condition General condition: average Technical condition: average Optical condition: average Damages: none = Company information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands; model years and price categories. Why buy at Kleyn Trucks? It’s simple! • Large, rapidly changing stock • Guaranteed quality • Fair prices • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration numbers arranged quickly • Expert technical services • The security of certified quality • And more… Visit our website for special offers and the complete stock list. Leasing via Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send your enquiry via our website. Ask us directly about our European warranty package.

Condition: used, maximum load weight: 26,646 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2018, next inspection (TÜV): 08/2026, Color white, Thermoking SLXi Spectrum-50, rail-loadable, total operating hours 7,634, diesel hours 6,042, electric 1,589. Sale in as-is condition. Podpoxv Nxfefx Adiegw

Condition: used, mileage: 598,000 km, first registration: 02/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, 4 x DAF XF106 450 SSC BDF swap bodies with hydraulic VANTEC lifting frame • VANTEC lifting frame / multi-changer • Emissions standard: EURO 6 D • Intarder • Wheel configuration: 6x2 • Lift / steer axle (3rd axle) • Automatic climate control • Auxiliary climate control • Auxiliary heating • Automatic transmission • Differential lock • Adaptive cruise control • Lane departure warning • Emergency brake assist • Hill start assist • Multifunction steering wheel • Refrigerator • Airbag • Radio-CD player • 2 beds • Gross vehicle weight: 26,000 kg • Unladen weight: 10,220 kg • Parking height: 1,020 - 1,320 mm • For swap bodies of 7,150 and 7,450 mm • Tires: 315/60 R22.5 - German vehicles! Pgodpswmplcefx Adisw - 1st owner! - MOT / AU and SP available upon request for an additional charge! Subject to errors and prior sale!

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 04A62, cutting height (max.): 150 mm, saw blade diameter: 450 mm, cutting width (max.): 690 mm, spindle speed (max.): 3,600 rpm, TECHNICAL DETAILS Max. saw blade diameter: 450 mm Max. distance between saw blades: 550 mm Max. cutting width: 690 mm Max. cutting height: 150 mm Min. workpiece length: 2,000 mm Min. feed speed: 20 m/min Pedsxw R Nbjpfx Adiegw Max. feed speed: 120 m/min Max. spindle speed: 3,600 rpm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 2,200 x 2,150 x 2,080 mm Weight: 3,500 kg Main motor power: 30.0 kW

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 660mm, Swing over bed 660mm, maximum turning length 1,540mm, Traverses X Y Z 630mm, 300mm (+/-150mm), 1585mm, B axis 240degrees (+/- 120), C axis 0.001 degrees, main spindle speed 3,000rpm, milling speed 12,000rpm, Pgedpjq T Rt Dofx Adiow bar capacity 102mm, 40 station ATC, Capto C6 taper, spindle power 26/18.5 kw, Fanuc 31iB control, probe, swarf conveyor, hydraulic steady, coolant

Condition: used, power: 122 kW (165.87 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 8,321 h, Equipment: air conditioning, Technical information AdBlue system: Yes Make of engine: C7.1 Podpfexz Hryex Adijgw Top speed: 6 km/h Empty weight: 22.800 kg Functional CE mark: yes Identification Serial number: CAT00323LRAZ01103 Other information EPA Marked: yes Undercarriage condition: 80 Output of the auxiliary hydraulics: 429 l/min Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 9,53x2,98x3,16 Production country: JP Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: good (used), power: 205 kW (278.72 HP), fuel type: diesel, color: yellow, Year of construction: 2019, operating hours: 10,045 h, Equipment: air conditioning, Technical information Track width: 90 cm AdBlue system: Yes Make of engine: C7.1 Empty weight: 30.800 kg Functional Bucket capacity: 2,2 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: CAT00330KPFN00194 Other information EPA Marked: yes Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 10,4x3,5x3,5 Production country: JP Podpfx Aexq Aluediogw Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Year of construction: 2019, condition: excellent (used), functionality: fully functional, machine/vehicle number: FKLB07-6WH921-0001, Technical Specifications: Refrigerant: R410A (73.3 kg) Power Supply: 3~400V, N, PE, 50Hz Max. Pre-Fuse: 100 A Full Load Input: 43.1 kW Psdpfx Adowz Rhzeiegw Full Load Current: 92 A Protection Rating: IP20 PED Category: 2 Type D – suitable for industrial applications Pressure Ratings: High Side Pressure PS: 4.32 MPa Low Side Pressure PS: 3.00 MPa Additional Information: Serial Number: FKLB07-6WH921-0001 Software Version: CV3.08.002 / DV4.08.000 Cooling Medium: R410A Construction Order No.: PO-215630 121721 Operating Manual / Wiring Diagram: PR-2013-0101-R3

Condition: used, Year of construction: 2015, operating hours: 6,175 h, CE mark: yes Serial number: 3xxxx Please contact ATS Norway for more information Psdpoxf Tdkefx Adijgw Please provide reference number upon request: 21416 Specifications: 2015 model 6175 (want a little) Gets certified before sale 7620 kg 50.7 kW Machine width: 322 cm Cut Chassis (see pictures) Additional hydraulics Central lubrication S50 attachment Tiltrotator Sanding bucket Narrow drawer Excavator bucket Light Air conditioning/ac Radio Delivery by appointment   Description: We have a 2015 Komatsu PC78us Excavator w/ Rototilt, sanding bucket, narrow bucket and digging bucket for sale. The machine functions as it should and is certified before sale. Services and maintenance have been taken on a continuous basis. Ready for delivery Hours: 6175 Own weight: 7620 CE: Yes Model: PC78us Gravemaskin m/ Rototilt, pusseskuffe, smalskuffe og graveskuffe

Condition: new, power: 370 kW (503.06 HP), fuel type: diesel, color: yellow, Year of construction: 2023, operating hours: 5 h, Equipment: air conditioning, Technical information Make of engine: C15 Top speed: 4 km/h Empty weight: 74.700 kg Functional Bucket capacity: 5 m³ Condition General condition: very good Technical condition: very good Visual appearance: very good Identification Serial number: CAT00374KKHH2007 Pedpfoxzarmjx Adiegw Other information Undercarriage condition: 100 Output of the auxiliary hydraulics: 896 l/min Delivery terms: EXW Transport dimensions (LxWxH): 13,682x4,519x3,5 Production country: CN Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: used, Year of construction: 2018, operating hours: 6,549 h, CE mark: yes Serial number: Product ID Number: HCMDBS5XC0060xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21258 Specifications : 2018 model. 6549 hours. 128.4 kW. Net weight: 20800 kg. Additional hydraulics. Central lubrication. Rear view camera. Bunkering pump. Excavator bucket. Pjdow Upc Aspfx Adiegw Encon Rototilt. Belt width: 60 cm. Machine width: 280 cm. CE marked. Certified: yes. Watch video. Description : The drawer that comes with the machine is not included in the sale. It comes with a digging tray. A sanding bucket can be included for an additional price. Delivery is arranged. Hours: 6549 Own weight: 20800 Total Weight: 20800 CE: Yes Model: ZX 190 LC-6