Used Multifunction Copier Printer Scanner for sale (6,693)

Condition: good (used), 3DGENCE Type: Industry F420 Year of manufacture 2021 Technical data: Working space: 380 × 380 × 420 mm (60 648 cm³) Iodpot I Dm Ijfx Ah Ueik External dimensions (WxDxH): 900mm x 950mm x 1950mm Printing system: double extruder equipped with cleaning system Diameter of the filament: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 places for the filament with automatic exchange system Temperature of the print head (max.): 500°C Temperature of the print bed (max.): 180°C Temperature of the working chamber (max.): 180°C (active heating) Temperature of the filament chamber (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Iiedpfsux Sfzjx Ah Uek Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Year of construction: 2015, condition: new, We have a MATICA Espresso card printer available. This printer is bought by us in 2015 and has been standing in the showroom. Price new ist € 1.599,-, price now is € 999,- We have come to the conlcusion that this type of machinery is not the type of machinery we are able to offer as a distributor in a correct manner. Therefore this printer is new and has just printed max 10 cards in its life. Single or double side edge-to-edge Optional Magstripe and Smart Card encoder Ethernet and optional WiFi Iodjfnldqspfx Ah Uoik Prints up to 850 cards per hour 100-card feeder The Matica Espresso II is a compact and powerful desktop ID card printer, that is a brainchild of Italian design & engineering and reflects German reliability in consistent performance. The Espresso II offers great value and versatility with extraordinary printing speed and outstanding print quality. With its robust and durable construction, the Espresso II looks and works great in any office or card production environment. The Espresso II is a single side desktop ID card printer for projects needing printing only on one side. The Espresso can be field-upgraded to easily double the printing capacity with the duplex printing feature. Any Espresso II printer can evolve to duplex anytime, anywhere without the need to install additional hardware components. Contact and contactless smart card encoding are also field-upgradable features. LED status indicators on the front of the printer allows you to monitor the card production process at a distance, and the blue LED light on the card hopper door keeps you aware of your card input availability in real time. You can also use optional single card manual insertion for individual card printing as needed. Each printer comes with a rear output hopper to catch full card runs as needed, which can improve the throughput speed in higher volume scenarios. In standard setup, having front-side input and output trays is also convenient for situations where space is limited, in a desktop environment, a cabinet or under a counter. Each Espresso II printer also has the option for inline magnetic stripe, contact chip or contactless smart card encoders, to maximize its functionality for a broader set of application uses, such as access control, time & attendance, payment services, and many more. The entire line offers Ethernet connectivity and optional WiFi making printing and encoding convenient and trouble-free. You can easily define your printer and choose the one that perfectly matches your current needs, as Espresso II offers a vast range of options. Whether or not your requirements evolve in the future, you have still the possibility of making an upgrade by adding functionalities to your existing configuration. The new printer line works perfectly for a wide variety of applications such as Employee and Membership ID Badges, Service and Benefits Cards, Gift and Loyalty Cards, Access Control Cards, Student IDs, and Transit Cards, just to name a few. The Espresso II is available with different specifications ​— modules, encoding, color, etc..

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Ijdpfjxpux Rox Ah Usik Capable of producing delicate components with wall thicknesses down to 0.4 mm. Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2012, Accu-Sort Axiom-X 2L Barcode Scanner RA2283 Manufacturer: Accu-Sort Model: Axiom-X Number of lasers: 2 Maximum scans per second 1120 SPS Voltage: 230V AC (12-30V DC) , 24V output Size L 311 mm x W 354 mm x D 176 mm Weight of scan head 6.6 kg Mounting bracket: 1.9 kg Cable base 0.8 kg Power supply unit 1.1 kg Housing Powder-coated cast aluminum, high-impact plastic, protection class IP54 Operating temperature: 0° to +50° C Storage: -20° to +70° C Relative humidity 10% - 90% non-condensing Laser type Visible laser diode 650 nM (standard) Power consumption < 40 W Optical indicators (LEDs) Status, trigger, read, RX/TX, network, link, read quality (5 LEDs) Barcode types All standard 1D symbologies Isdpfxsr Dwbgo Ah Uoik Connections Dedicated setup connection, optional RJ45 connection for Ethernet Communication Standard On-board EtherNet/IP, Ethernet TCP/IP, Serial RS232, RS422 and 4 programmable I/O relays Communication Optional DeviceNet, Profibus MTBF > 71,949 hours at 30° C Conformity UL, cUL, CE, FCC (Class A), 21CFR1040, IEC-60825-1 Year of manufacture 2012 Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg

Condition: as good as new (ex-display), Year of construction: 2015, We have a Xante Impressia digital printing system available. The Xante Impressia printing system is specially built for printing envelopes! System can also print documents of course ranging up to A3 and 300 gr/m2! Iiedpfxsd Tfiuo Ah Ujk This Xante Impressia just came in. Year is 2015 and counters are 317.152 color and 19.901 prints black. but the printer is in good working condition. Of course all the drums and toners are in the machine. This is part of the printer. Please contact us to get a hold of this machine for a super discount price!

Condition: excellent (used), Type: AM250 / SMC Thermo Chiller HRS024-A-20-T Complete system for metal 3D printing / additive manufacturing Description For sale is a complete metal 3D printing system consisting of: Renishaw AM250 Additive Manufacturing System SMC Thermo Chiller HRS024-A-20-T (MS400) for precise temperature control The system originates from an industrial research environment and was used for additive manufacturing of metal components. The AM250 is renowned for its high process stability, repeatability, and Renishaw’s proven powder bed technology. The accompanying thermo chiller ensures a constant operating temperature and is specifically calibrated to the system. Technical Data – Renishaw AM250 Description / Value Machine Number: 380T38 Control Cabinet No.: AM250 Operating Voltage: 230 V Phases: 1 PH + N + PE Control Voltage: 24 V DC Heating Power: 2 kW Current Consumption: 16 A Operating Temperature: 15°C – 30°C Overload Protection: Circuit Breaker Technical Data – SMC Thermo Chiller HRS024-A-20-T (MS400) Description / Value Model: HRS024-A-20-T (MS400) Iijdpfx Aexnzu Aeh Uok Cooling Capacity: approx. 2.4 kW Operating Voltage: 230 V AC, 1 phase Temperature Range: 5°C – 35°C Refrigerant: R407C Condition: used Scope of Delivery Renishaw AM250 main unit SMC Thermo Chiller HRS024-A-20-T (MS400) Control and connection cables Control module / Control cabinet (Specifications and data subject to change and error!) We are happy to answer further questions for you by phone.

Condition: used, Year of construction: 2019, Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Iisdpfek Abl Ejx Ah Ujk Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019

Condition: good (used), German reprap (innovatiq) Type: German RepRap X500 RepRap 3D printer Technical Data: Material: Composite materials (carbon fiber, glass, Kevlar) Technology: Fused deposition molding (FDM/FFF) Dimension: 1120 × 850 × 955 mm Weight: 185 kg Nozzle diameter: 0.4 Ø mm Printing speed: 10 - 150 mm/s mm/sec Precision XY: +/- 0.05 mm µm Iisdpfx Ahsuif Ize Uok Max. Volume: 500 × 400 × 450 mm Power: 230 V AC 50Hz 10 A 2.3 kW Further features: Touchscreen Condition: second-hand / used Scope of delivery: (see pictures) + filament rolls (PETG) and printing accessories Only PC (WIN 7) available! Screen and input devices not! License for current software to operate the printer must be purchased by the customer (approx. 200 Euro for Simplify3D)! (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm Iiedjk Abllspfx Ah Uok width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Iiedsqy Edyspfx Ah Uok Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Omnidirektionaler barcode scanner X Manufacturer: ACCU-SORT Featured: The Omni-directional barcode scanner product family mini-X are used for the reading of arbitrarily oriented bar codes. This is made possible by an optical arrangement of several arranged crosswise to each other scanning, which is integrated in a compact housing. Bar codes can be identified at a distance of 500 up to 1800 mm. A total of six configurations to satisfy a wide range of read. With the DRX de fragmentierung technology also badly damaged or poorly printed codes can be reconstructed safely. The TachTrac function maps the read result the right object with several objects in the reading pane. RS 232, RS 422 or RS 485 interfaces the reading result is decoded in the device is delivered. Usage area: The Omni-directional barcode scanner X for arbitrarily oriented bar codes is used in identifying non-aligned objects or labels in the Variantenfertigungs - or material flow control, and charge capture. Multiple scanners can be operated side by side to extend the reading width. Specific applications are picking and returns handling items in the shipping trade of so-called small, E.g. From CD\'s, books, or videos, as well as the sorting in distribution centers. The scanner in the identification of wheels or bodywork in automobile production, as well as packages for package services is further used. Iodpfxok Aa Dwo Ah Ujik Delivery in Germany (without Islands): free incl. mains cable without software Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Isdju Ebybopfx Ah Usik Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Iodpfx Asnkalgsh Uoik Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos EOSINT plastic laser-sintering system Here we offer an Eos EOSINT plastic laser-sintering system. Eos EOSINT Plastic Laser-Sintering-System P380 The EOS P380 system includes the following Installation space container Powder container Overflow tank Cooler: Termo TEK Termochiller Type: 802-18644-3 Unpacking stamp Removal trolley 3DM 8 zone process chamber heating 250°C Each zone individually adjustable, homogeneous temperature field ± 1°C Kelvin 350mm x 350mm x 610mm Iiedpfjft R Swjx Ah Uek Voltage 3/N/PE/ 400V AC Frequency 50 Hz Connected load 8 kW Fuse 32 A MAX. Laser power 100 W Laser class open 4 Laser class Closed 1 Weight 850 kg Type: EOSINT P 380 condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), Rexcan Type: 3D scanner Rexcan CS2 + 3-axis swivel table TA 300+ Technical data: 6.0 MP camera 1 lens set FOV:125,250,500 V:125,250,500 B:95,195,380 H:80,155,320 SPA:0.036, 0.072, 0.145 G:0.01-0.015, 0.02, 0.03 Iiedpjvt Sydefx Ah Ujk Triangulation angle = 25 degrees PC and software included (screen not included) Scan software: eZScan 2017 Geomagics Control X Version 2018.1.2 Scanner “Rexcon CS2” Rotary table “TA300+” Optics set 125, 250, 500 Calibration plate for all three optics Clamping set Holder for small parts Cabinet on wheels + adjustable with integrated spirit level Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office Ijdpfxsk Hz Nqe Ah Uoik X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Color: 390,000 colors (5 print heads, including black) Iijdpfxshb Dtpe Ah Usk Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Iisdpfx Aheu Ebt Us Usk Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Eos Metal Laser Sintering System Here we offer an Eos Metal Laser Sintering System. Material processed with the system: Gold Laser type: Yb-fibre laser, 100 W Scan speed: up to 7.0 m/s Construction volume: Ø80mm x 100mm Dimensions (W x D x H) system: 800 mm x 950 mm x 1,850 mm Installation area: 1000mm x 3000mm x 2500mm Weight approx. 580 kg Iodpfx Aeqzgvaoh Ujik Software: EOS RP Tools, Offline PSW CAD interface: STL Network: Ethernet Type: EOS M080 External gas connection (nitrogen) Power consumption maximum 2.3 kW 13A Scope of delivery: See pictures Condition: used (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Ijdpou Ebufofx Ah Ueik Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Iodpfxou Ebv Ao Ah Ujik Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: used, 3DGENCE Type: Industry F420 Technical data: Ijdpfswnpbgox Ah Ujik Working area: 380 × 380 × 420 mm (60,648 cm³) External dimensions (W x D x H): 900mm x 950mm x 1950mm Printing system: dual extruder equipped with cleaning system + Interchangeable nozzle head Filament diameter: 1.75 mm Printing material: PLA, ABS, ASA, PA6/69, PC, ULTEM™ filament, PEEK Support material: soluble support material ESM-10, HIPS Filament chamber: 4 slots for filament with automatic changing system Print head temperature (max.): 500°C Print bed temperature (max.): 180°C Work chamber temperature (max.): 180°C (active heating) Filament chamber temperature (max.): 50°C Condition: used Scope of delivery: (see pictures) Weight: 350 kg (Changes and errors in the technical data, specifications reserved!) We would be happy to answer further questions by phone. Written orders possible by email or fax

Condition: excellent (used), Keyence Model: VR-5200 Type: Measuring Head Light Sources Viewing Light Source: LED Ring Light (red, blue, green) Measurement Light Source: White LED Control Unit: VR-5000 Viewing and Measurement Range Macro Mode Magnification (based on a 15-inch monitor) 12×: Horizontal 24.0 mm Vertical 18.0 mm Magnification (based on a 15-inch monitor) 25×: Horizontal 12.0 mm Vertical 9.0 mm Iodpewc Sxdofx Ah Uoik Magnification (based on a 15-inch monitor) 38× Horizontal 8.0 mm Vertical 6.0 mm Magnification (based on a 15-inch monitor) 50× Horizontal 6.0 mm Vertical 4.5 mm Micro Mode Magnification (based on a 15-inch monitor) 40× Horizontal 7.6 mm Vertical 5.7 mm Magnification (based on a 15-inch monitor) 80× Horizontal 3.8 mm Vertical 2.9 mm Magnification (based on a 15-inch monitor) 120× Horizontal 2.5 mm Vertical 1.9 mm Magnification (based on a 15-inch monitor) 160× Horizontal 1.9 mm Vertical 1.4 mm Zoom 1× to 4× Height Measurement Measurement Resolution 0.1 µm Height Measurement Range Without Z-Compositing Macro Mode: 10 mm Micro Mode: 1 mm With Z-Compositing Macro Mode: 50 mm Micro Mode: 30 mm Repeatability (σ) Without image stitching in Z 0.4 µm With image stitching in Z 1.0 µm Measurement accuracy Without image stitching in Z ±2.5 µm With image stitching in Z ±4.0 µm Width measurement Repeatability (σ) Macro mode: 1 µm Micro mode: 0.5 µm Measurement accuracy Macro mode: ±5 µm Micro mode: ±2 µm Image stitching Fully automatic measurement (automatic XY control + automatic Z focus), Automatic assignment, automatic area setup Measurable XY area 206 x 104 mm Stage XY travel 184 × 88 mm (motorized) Z travel 73 mm (motorized) Load capacity 4.5 kg Working distance 75 mm Image pickup element 4-megapixel CMOS, B/W Transmitter lens Dual telecentric lens x 2 Receiver lens Dual telecentric lens Data processing Dedicated PC according to KEYENCE specifications (Operating system: Windows 11 Pro) Power supply Voltage 100 to 240 V AC, 50/60 Hz Power consumption Max. 200 VA Environmental resistance Ambient temperature 15 to 30 °C Relative humidity 20 to 80% RH (no condensation) Weight Approx. 28 kg (weight of the measurement unit only: approx. 11 kg) Distance extension stage Viewing software VR-5000 Version 3.3.5.75 Image composition module VR-H3J Creates a single large image from a series of images captured with the viewing software. You see color images. Analysis Expansion Module VR-H3CA Extends the functionality of the analysis software. Can perform measurement comparison and 3D CAD measurement comparison. Condition: Used Scope of delivery: (as shown) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. Iisdpfjivpdwox Ah Uok The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.