Used Multiple Saw for sale (7,104)

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min Itsdpfx Aajzkkf Aoxek • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm Ijdpexpqzhefx Aaxotk The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: KK/126675, functionality: fully functional, cutting height (max.): 100 mm, saw blade diameter: 315 mm, saw blade bore: 30 mm, overall weight: 250 kg, intake manifold diameter: 120 mm, TECHNICAL DETAILS Maximum cutting height: 100 mm Cutting height at 45°: 70 mm Minimum saw blade diameter: 250 mm Maximum saw blade diameter: 315 mm Saw blade bore: 30 mm Saw unit tiltable: 45° to 90° Table and guides Roller table length: 840 mm Table width: 560 mm Parallel guide adjustment: 1,300 mm Dust extraction Dust extraction port diameter: 120 mm MACHINE DETAILS Electrical data Voltage: 400 V Current consumption: 10 A Fuse rating: 16 A Main motor power: 3.0 kW Dimensions & weight Dimensions (L x W x H): 2,100 x 900 x 1,050 mm Machine weight: 250 kg Transport packages: 1 piece EQUIPMENT CE marking Ijdpfx Aezuwuxoaxstk Note: The shaft and saw blade for the scoring unit are present, but the drive motor for the scoring unit is missing.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 Isdpfxezuygqs Aaxstk • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: - Saw blade dimensions: 300 x 3.4 x 32 mm Itodpfx Asd Aai Tsaxok - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: repair required (used), Year of construction: 2024, Overhauled: 2024 PLC control: Siemens S7 Saw blade 60 - 250 mm Motor power 1.5 KW Saw blade feed 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metal) Max. working area: 70x40 mm (steel) Working area max.: 60x40 mm (non-ferrous metal) Working range round: 5 - 70 mm (steel) Working range round: 5 - 50 mm (non-ferrous metal) Feed length 5 - 500 mm 5-9999 (multiple stroke) Feed speed max. 500 mm/sec Weight (saw)approx.: 610 kg Dimensions LxWxH (saw)approx.:2500mm x 1000mm x 2000mm The machine will be overhauled in our company on customer request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - Replacement of the pneumatic feed or replacement of the ball screw spindle - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Optimization of the suction concept - Maintenance of the central and minimum lubrication system - Replacement of general wear parts - Overhaul of the machine body The machine also has: - Minimum lubrication for optimum sawing quality Due to its equipment and design, the machine is suitable for mass cutting of steel in the high-precision tolerance range. Guarantee: Itsdpfx Asuiy I Asaxsk Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion of the sawing unit to a gearless main drive for sawing non-ferrous metals and plastic materials (speed 1000 - 3000/1min.). - Feed unit 1000mm - Feed unit 2000mm - Screw magazine 4m - Screw magazine 6m - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prismatic jaws (60°) for mass clamping of round materials - Discharge system - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2023, HYDRAULIC HIGH PERFORMANCE BAND SAW LINE Manufacturer: BEHRINGER Model: HBM 440 A Year: 2023 Condition: As new – only 82 operating hours Technical Specifications: - Cutting range (round): 440 mm - Cutting range (flat WxH): 440 x 440 mm - Minimum round/flat: 15 mm / 12 x 12 mm - Saw band dimensions: 6700 x 54 x 1.1 mm - Drive power: 11 kW - Cutting speed: 15 – 150 m/min - Material feed length per stroke: 600 mm - Material feed length, multiple stroke: Max. 5400 mm - Machine weight: 4600 kg - Dimensions (LxWxH): 4900 x 2650 x 2700 mm - Transport height: 2700 mm All information subject to change – errors excepted Equipment & Features: - Coolant system 200 l - Full enclosure of the saw - Chip conveyor - BEHRINGER BT 65 TOUCH CONTROL + AUTO FEED CONTROL - Automatic bar change, max. 3000 kg Infeed: - Magazine KM 45 F-VR /600-6,200 mm - Round material: 50 – 440 mm - Flat: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Driven roller conveyor: 6100 mm Iedexw T Ugjpfx Aaxotk - Usable material storage: 3000 mm - Safety fence Outfeed: - Output side: metal belt, ejector plate, storage table Metal belt: - For transporting cut pieces, finished parts, and remnants - Width: 550 mm, length: 4200 mm - Guides on both sides up to 1000 mm length Side ejector for short bars (pusher) Storage table for cut material and stock: - Max. weight: 1000 kg - Length: 2400 mm - Usable depth: 1500 mm Subject to prior sale

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW Ijdpfjzugt Rox Aaxetk – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Condition: good (used), Year of construction: 1992, machine/vehicle number: 5164, Offer 23148 Technical data: - with hydraulic clamping and feed device - Cutting range round 320 mm - square 300 x 300 mm - large cut-off length with single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm Itedeq Evn Eopfx Aaxjk - Infinitely variable cutting speed 20 - 100 rpm - Hydraulically infinitely variable feed speed - Coolant device - Material support height 720 mm - Saw band - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Condition: repair required (used), Year of construction: 1997, machine/vehicle number: 26992, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 415 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,900 mm, cutting width (max.): 4,500 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, rotational speed (max.): 4,750 rpm, STRIEBIG Econom II Vertical Panel Saw (1997) Fully operational Striebig Econom II vertical panel saw removed from our professional joinery workshop following replacement with a newer machine. The machine is fully functional and was in regular use until removal. It cuts accurately, the carriage runs smoothly and all operating functions work as intended. The saw is being sold as in need of repair because it does not have a functioning motor brake, meaning it no longer complies with our workshop's health and safety requirements. It should therefore be inspected and recommissioned by the purchaser before being returned to service. Itedszimnkopfx Aaxjk Specification Manufacturer: Striebig Model: Econom II Year: 1997 Machine No: 26992 3 kW motor 415V, 3 Phase Maximum cutting height: 2200 mm Blade speed: 4750 rpm Dust extraction connection Viewing is welcome. Collection only from Finchampstead, Berkshire. Buyer responsible for loading and transport.

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; Ijdpevxwkfefx Aaxstk frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: used, De Walt crosscut saw Motor 2.2 kW, Max blade: 300 mm, Itedjyxnbmepfx Aaxjk Adjustable saw blade in multiple directions, Cutting length on the arm: 65 cm, Max cutting height: 8 cm.

Condition: good (used), Year of construction: 2002, machine/vehicle number: 122668, functionality: fully functional, cutting height (max.): 460 mm, cutting width (max.): 600 mm, saw band length: 7,470 mm, saw band width: 54 mm, section length (max.): 760 mm, section length (min.): 8 mm, TECHNICAL DETAILS Saw Blade Dimensions: 7,470 x 54 x 1.3 mm Cutting speed: infinitely variable (approx. 1:7) Working Area Iodjzmdrnopfx Aaxjtk Material diameter - round material: max. Ø 460 mm Material dimensions - square material (w x h): max. 600 x 460 mm Cut-off length - single stroke: min. 8 mm, max. 760 mm Cut-off length - multiple strokes: min. 8 mm, max. 9,999.9 mm Minimum part length in automatic mode: 90 mm Working Height Working height: 720 mm MACHINE DETAILS Dimensions & Weight Dimensions (L/W/H): 2,320 x 3,660 x 2,570 mm Width with chip conveyor (option): 4,650 mm Weight: approx. 6,000 kg Electrical Data Main motor: 7.5 or 9.2 kW Hydraulic motor: 2.2 kW Saw drive motor: 0.18 kW Coolant pump: 0.19 kW Chip conveyor (option): 0.18 kW Roller conveyor drive (option): 0.8 kW NC positioning drives (option): 0.37 kW

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, - complete with hydrostation, Itedpfxjtqt T Ij Aaxek - electrical cabinet.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube Ijdozba E Ispfx Aaxetk The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: used, Year of construction: 2021, UK's Best Selling Automatic Crosscut Saw Built to meet the precise standards of fine joinery while embodying the robust quality of a sawmill, the globally acclaimed TR500 saw unit boasts a distinguished history of over 400 installations in the UK and over 50 years of industry use. A key component within the TR platform, the TR500 stands out with its ever-present 7.5kW saw motor - a consistent feature across the entire Stromab range. Its variable speed cutting cycle allows the precise cutting of softwoods or hardwoods, accommodating dimensions of up to 135mm in height or 360mm in width, all managed by a single top clamping unit. Infeed: The industry standard rack and pinion system featured through the Stromab range allows timber lengths of up to 14m and up to 90kg to be push fed without additional rollers. Featuring a table incline of 8 degrees, automatic lifting pusher system and a positioning accuracy of 0.4mm, the Stromab Matrix powers through your repetitive and bulk cutting requirements. Controller: Harnessing the power of an ELCO Top 12 colour touch screen, cutting lists are simple to programme using the innovative optimisation methods: BASE with board sequence, max length, or sequence. OPTI with base features and volume, minimum waste or priority. Iodpszd Uqcefx Aaxstk Alternatively, use our 'Design2Saw' software to pre-optimise files for the highest yield savings, loaded quickly via USB to reduce operator programming time. Specification Saw Unit: 7.5kw saw motor 500mm diameter saw blade 135mm x 120mm cutting height 360mm x 55mm cutting width Infeed & Outfeed: 90m/min positioning speed 0.4mm positioning accuracy 8 degree incline on table Servo driven rack & pinion 1m outfeed table as standard Automatic lifting of pusher arm Controller Elco TOP12 12" industrial touch screen PC 3 optimisation criteria - longest length, sequence & board sequence Fitted with the following options - 6000 mm in feed capacity Pneumatic lifting of pusher 10 hp saw motor Ø500 mm saw blade Opti version with full optimisation and board length reading Defect reading camera ( chalk mark reading )

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Itjdpfxjwqw Tvj Aaxek Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Ijdpfxjyzf E Uo Aaxetk Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Depth of Cut: 60mm Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, year of last overhaul: 2020, Equipment: CE marking, Automatic Bandsaw - Crosscut and straight cut - machine was refurbished in 2020 and is in excellent condition - nice and simple to use - built to last, made in Italy. Itsdey S Dbpopfx Aaxsk

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Itsdpfxjzq Ab Ne Aaxok Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Ijdpjyx H Dtofx Aaxetk Installation • Wall-mounted or free-standing installation possible

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, The log processing line includes the following units: • log splitting band saw – ELCA SNV14 • log handling carriage – ELCA CMOL33 • planer – ELCA PTL1000 • cross-cutting circular saw – ELCA TRCBT3 • multiple-blade rip saw – COSTA LEONE 2160 • log profiling system – VISION_1200 • material handling systems required for servicing the processing line ◦ cross conveyor chain conveyor ◦ roller conveyor • band saw sharpening machine – ALIX AF 518 Isdpfozg Dl Ijx Aaxjtk • dust and chip extraction system – VENTIL VENETA, model PF/JET, designed specifically for the system

Condition: used, Year of construction: 2008, machine/vehicle number: 08063895, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, KNUTH B180 For sale is a robust and reliable miter band saw for metalworking. Technical data: Cutting capacities: * 90° rectangular: 180 × 290 mm * 90° round: 180 mm * 45° rectangular: 100 × 120 mm * 45° round: 100 mm Band speeds: * 22 / 33 / 45 / 65 m/min Drive: * Main drive motor power: 0.75 kW * Supply voltage: 400 V Dimensions & weight: * Blade dimensions: 2360 × 20 × 0.9 mm * Machine dimensions: 1244 × 457 × 1580 mm * Weight: approx. 105 kg Features & advantages: * Precise miter cuts * Robust and stable construction * Multiple adjustable blade speeds * Ideal for steel, stainless steel, and other metals * Suitable for workshops and professional applications Condition: used / fully functional Inspection and test run possible by appointment If interested, please get in touch. Iodpfx Aey R T R Rjaxotk

Condition: refurbished (used), grinding wheel diameter: 150 mm, year of last overhaul: 2026, disc diameter: 150 mm, grinding spindle motor power: 2,200 W, compressed air connection: 5 bar, The machine has been completely disassembled, all wear parts have been replaced, and it has been repainted – it is in like-new condition. Sale includes a functional guarantee. Key features: - For resharpening and re-toothings of HSS segment, CV, and solid carbide saws using the CBN deep grinding process Tooth form A, Aw, B, Bw, and C according to DIN1840 - Grinding of Vario teeth (option) - Grinding of special teeth (option) - Grinding of carbide teeth (option) - Grinding of segment teeth (option) - Freely adjustable (programmable) tooth geometry - Grinding of repair segments for segment saws - Chamfering on alternating top/bottom or on one side - Rake and clearance angles can be continuously adjusted - Improved machine guard for easy opening/closing Key advantages: - Short grinding times with high surface quality due to stable machine design with adapted clamping flanges for the saw blades and high drive power. - Consistent, repeatable quality thanks to CNC control - Powerful grinding wheel drive - Fully digital servo drives (2 CNC axes) Technical data: - Saw blade diameter 20-550 mm - Maximum saw blade thickness 6 mm - Number of teeth 20-999 - Working speed 3-75 teeth/minute - Cooling approx. 5 bar at 40 l/min - Grinding wheel drive 2.2 kW - Dimensions L x W x H approx. 1750 x 1200 x 1800 mm - Net/gross weight approx. 800/980 kg - Paint color: Dove blue Iodpepgkgqjfx Aaxetk Accessories: - Software for grinding curve teeth, bevel teeth, circular grinding (Software extensions such as special teeth, Vario teeth, carbide teeth, available on request) - Saw blade arbors, diameter 400, 300, 215, 180, 140 mm (other sizes available on request) - Conversion to English language (keyboard input) possible - Reducing rings, diameter 16x22, 27, 32, 40, 50 mm (other sizes available on request) - Multiple grinding wheels, new and used, included - Basic arbor for saw blade arbors - Mechanical clamping nut - Cooling system incl. high-pressure pump, mist extraction, and magnetic separator, designed for cooling with emulsion. - Automatic central lubrication with lubrication pressure monitoring (linear guides + ball screw drive) - Operating manual incl. circuit diagrams - Operating voltage 400 V A trade-in of your existing used ECE 45 is possible. Spare parts that may be required later can be supplied by us.

Condition: ready for operation (used), Year of construction: 2018, We offer for sale a industrial extraction and filtration system designed for efficient removal of sawdust, wood chips, and dust from woodworking machines. The system is suitable for medium to large production facilities and ensures high filtration efficiency with stable and reliable performance. Key Features & Benefits High-capacity central extraction system Designed for woodworking industry (chips, sawdust, dust) Complete filtration with clean air return to production hall Robust industrial design High filtration efficiency (approx. 99.985%) Integrated multi-branch extraction system Technical Specifications Filter Unit Model: FZŠ-H-C-7 Filtration area: approx. 528 m² Number of filter hoses: 352 pcs Separation efficiency: 99.985% Dimensions Approx. 8,081 × 2,450 × 6,245 mm Cleaning System Automatic cleaning via 6 vibration motors (EVK 150 W each) Isdjzgtkmspfx Aaxotk Extraction Performance The system includes multiple extraction branches with different capacities: Branch 1: approx. 13,700 m³/h, 18.5 kW Branch 2: approx. 10,900 m³/h, 15 kW Branch 3: approx. 10,900 m³/h, 15 kW Branch 4: approx. 10,900 m³/h, 15 kW Branch 5: approx. 8,350 m³/h, 11 kW Branch 6: approx. 8,350 m³/h, 11 kW Fans included: 1 × 18.5 kW 3 × 15 kW 2 × 11 kW Total Installed Power Approx. 89.7 kW System Description Central filter with multi-branch ducting system Suitable for connection to multiple woodworking machines (e.g. saws, CNC, optimizing saws) Chip and dust separation with air recirculation Designed for continuous industrial operation Condition & Sale Terms Condition: Good working condition Complete system available (filter + fans + ducting as per scope) Dismantling and transport to be arranged by the buyer Additional Offer A smaller and newer version of this extraction system is also available for sale: Installed power: approx. 29.5 kW Suitable for smaller production capacities Advantages High performance and filtration efficiency Proven industrial solution Scalable for different production setups Reliable and low-maintenance operation