Used Narrow Track Tractors for sale (8,683)

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 1,196 h, load capacity: 2,000 kg, lifting height: 5,560 mm, free lift: 1,940 mm, fuel type: electric, mast type: triplex, construction height: 2,730 mm, fork carriage width: 860 mm, fork length: 1,200 mm, empty load weight: 6,780 kg, total length: 2,640 mm, drive type: Elektro, construction width: 1,250 mm, Narrow-aisle forklift Load center of gravity: 600 Fork width: 100 mm Fork thickness: 40 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Bandages Front tires Size: 16 1/4 x 7 x 11 1/4 Rear tires Type: Bandages Rear tires Size: 18x7x12 Battery Volt: 48V Battery Ah: 775Ah Battery year of construction: 2018 Hsdpfxou Dzt Eo Ab Uefr Sideshift, Full free lift,

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 2,000 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC-5, IRB2600 on a track of 10m 2 x IRBP-L2000 4000 x 1800mm Hfsdpfxexbd Eko Ab Usr EWM Phoenix 452 Two wirefeeders with welding gun Tool exchanger Bulls-eye Toortsreiniger Sensing with the wire ArcWelding Sensor Fence and safety curtains 2 clamping frames

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), Year of construction: 2025, ### Crawler Mobile Crusher / Track-Mounted Mobile Stone Crusher: Introduction and Application Introduction: Hedpfoq Nfvuex Ab Ujfr Crawler mobile crushers, also known as track-mounted mobile crushers, are versatile and highly efficient machines designed for crushing various materials on-site. Unlike traditional fixed crushers, these mobile units are mounted on tracks, allowing them to navigate rough terrains and remote locations with ease. These crushers integrate feeding, crushing, screening, and conveying processes into one system, providing flexibility and reducing the need for multiple pieces of equipment. Powered by diesel engines, they offer mobility, reduced setup time, and a compact design that simplifies transportation. Key Features: 1. Mobility: Track-mounted design ensures ease of movement across different sites. 2. Versatility: Suitable for crushing various types of materials, including rocks, ores, and demolition waste. 3. Efficiency: High-performance crushing and screening capabilities. 4. Eco-friendly: Equipped with dust suppression and noise reduction systems. 5. Automation: Advanced control systems for smooth operation and minimal manual intervention. Applications: 1. Quarrying and Mining: Ideal for crushing hard and abrasive stones such as granite, basalt, and limestone. They efficiently process raw materials for construction aggregates and mining operations. 2. Construction and Demolition: Perfect for on-site crushing of demolition waste, including concrete, bricks, and asphalt. This reduces the volume of waste and allows for recycling of materials, contributing to sustainable construction practices. 3. Infrastructure Projects: Widely used in road construction, railway ballast production, and infrastructure development. Their mobility ensures they can operate close to the construction site, reducing material transportation costs. 4. Recycling: Effective in recycling operations, particularly for crushing and processing concrete and asphalt debris. This contributes to reducing landfill use and conserving natural resources. 5. Aggregate Production: Essential for producing high-quality aggregates used in construction projects. Their capability to produce different sizes of aggregates meets various industry standards and requirements. Conclusion: Crawler mobile crushers are indispensable in modern construction and mining operations. Their mobility, efficiency, and versatility make them a valuable asset for industries requiring on-site crushing and screening. By reducing setup time and transportation costs, they enhance operational efficiency and contribute to eco-friendly practices through material recycling.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS Hodpfxjxya Hzs Ab Uofr 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: used, Year of construction: 2013, Robotic system consisting of: 1 welding robot Qirox QRH 390 incl. control unit, programming hand device, 24 V buffering, PC-side computer interface, 2 GB flash drive Gas nozzle sensor, arc seam tracking, point editor, Hfjdpfxsx Atp Ij Ab Usr Qineo Puls 450 with Premium control module, wire feeder, torch hose package, welding torch, torch testing gauge, mechanical cleaning, pressure booster, Floor-mounted track 10 kN, travel length 8 m, robot installed in upright position on base pedestal. Wire drum travels with the system. 4 positioners with counter bearing WP-TC 10 kN, load capacity 1,000 kg, clamping length 3.0 m, rotation radius 1 m Connection control, 4 light barriers, 4 prestart selectors, Delivery: immediately available. Special price for purchase by 15.12.2025! System will be cleaned, tested, and serviced prior to dismantling. Warranty: functional guarantee Very low operating hours

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. Hsdpfx Ajk Abdpsb Uefr With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2012, condition: ready for operation (used), A continuous cooling line/band cooling section Pennekamp is available. Belt width: 4500mm, pass-through height: 400mm, zones: 7, total length: approx. 23750mm. Some control components have been removed. Documentation available. An on-site inspection is possible. Hedpfx Aox E Acfjb Ujfr

Condition: used, functionality: fully functional, machine/vehicle number: FN568361 / FN568362, Year of construction: 2018, operating hours: 6,584 h, load capacity: 1,600 kg, lifting height: 12,280 mm, load center: 620 mm, fuel type: electric, mast type: triplex, construction height: 5,045 mm, battery voltage: 80 V, battery weight: 2,178 kg, fork length: 1,250 mm, overall weight: 9,908 kg, total height: 5,045 mm, total width: 1,600 mm, color: yellow, Equipment: UVV, full service history, Used EKX (2 units available) with guidance on induction loop Aisle width = 1,800 mm Distance between racks = 1,900 mm Max. speed = 12 km/h Lifting/lowering speed 0.6 m/s / 0.5 m/s Lead-acid battery: 80V6PzS930 + charger SLH090 Braking system: electro-mechanical Wheels: Vulkollan (PU) Hedpfx Absx Agvne Uefr

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 926 h, Aisle Master 20S Articulated forklift Serial: 30870 Hjdpfx Absv Ipdij Usfr 2016, gas, capacity 2000Kgs, lift height 4750mm, 3 stage full free lift mast, side shift, only 926 hours on the clock

Condition: excellent (used), Catalogue number 7807 TECHNICAL SPECIFICATIONS - Track width: 350mm - Cutting width: 350mm - Blade diameter: from 355 to 505mm - Cutting height: 10-170mm - Spindle diameter: 80mm - Table dimensions: 1900x790mm - Height from base to table: 830mm From above: - 2 rows of pawls/kickers - 2 smooth, metal glide rollers - Shaft with saw blades - 2 pressure glide rollers From below: - Guide bar - Pawls/kickers - Track - Electric height adjustment of the body - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 4kW - Main motor: 75kW - Extractor spigot diameter: 2x150mm - Overall dimensions (L/W/H): 2050x1800x1800mm - Weight approx.: 3500kg FEATURES Hfodpsxvb Hzofx Ab Uer - German-made - DTR technical documentation - Used multi-blade saw - Very good condition Net price: 58,900 PLN Net price: 14,000 EUR depending on exchange rate 4.2 EUR (Prices may change due to stronger exchange rate fluctuations)

Condition: used, lifting height: 25,200 mm, Year of construction: 2016, Weights Empty weight: 12.200 kg Functional Lifting capacity: 6.000 kg Identification Serial number: AMC2055 Other information Hsdpfoxvk Tkox Ab Uefr Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 5.86x2.32x2.65 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. Hodek Aa Txspfx Ab Usfr The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2004, condition: ready for operation (used), A continuous Pennekamp cooling line/belt cooling section is available. Belt width: 3800mm, pass through height: 400mm, zones: 8, burner: Pennekamp. Includes a partially existing spray system with mixing tank. Some control components have been removed. Documentation available. An on site inspection is possible. Hsdpfx Aex E Acleb Ujfr

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH241-14/433886, operating hours: 131 h, ABUS ELV crane system crane runway bridge crane indoor crane crane Load capacity / lifting capacity: 5t - 5000 kg Gauge: 13,500 mm, overall width approx. 13,700 mm Year built: 1999, with floor control Lifting height: 6 m Hodpex Ev Tkefx Ab Usfr Overall height from crane top edge to hook approx. 1,020 mm (Girder: 540 mm + lifting gear: 480 mm) End carriage length with buffers approx. 270 cm SWP: Full load hours used: 131, theoretical remaining service life: 1,469 hours Crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipment by freight forwarding possible, please inquire with postal code Collection preferred

Condition: used, functionality: limited functionality, load capacity: 1,000 kg, lifting height: 7,000 mm, Equipment: cabin, head guard, Offering here is a Linde high-level order picker. The order picker was taken out of operation two years ago due to the purchase of new equipment. The battery is now fully discharged and must be replaced. Apart from the defective battery, the order picker is fully operational. Hedpfoxy Ahuox Ab Ujfr The platform can be removed, allowing for pallet transport as well. Important: The battery is defective and must be overhauled or replaced! A loading ramp is available for loading. The costs for dismantling the mast and preparing the machine for transport are borne by the buyer. Technical specifications: Manufacturer: Linde Model: V10E01 Load capacity: 1000 kg Battery weight: approx. 900 kg Year of manufacture: 1992 Unladen weight: approx. 3,300 kg Battery voltage: 48V The order picker is being sold due to excess stock.

Condition: new, Year of construction: 2023, functionality: fully functional, type of input current: DC, table length: 600 mm, table width: 600 mm, It is a portable CNC cutting system from the brand manufacturer Thermacut: Hodpfxjv Ai T Hj Ab Uefr Input voltage: (VAC) 230V / 120 V, 50/60 HZ, 180 W, 0.5 A Max. cutting area: 3050×1525 mm Max. cutting speed: 3000 mm/min Vertical stroke: 100 mm Autogenous cutting area: up to 100 mm Plasma cutting area: up to 35 mm Plasma interface: Yes Burner height control via arc voltage Total weight: 145 KG Scope of delivery: Autogenous torch, nesting software, Operating instructions Mini cutting table: small, portable and robust with water tank for cutting with water 600×600 mm cutting area Grid is replaceable with Drain valve low weight (only 108kg) built-in lockable wheels maximum material load 400 kg can be purchased with plasma device and burner on request!

Condition: good (used), TigerStop / TigerCalvet Electronic length stop Hfodpfxexqzawj Ab Usr • Positioning length: 6.8 meters • Repeat accuracy: +/- 0.1 mm • Maximum positioning speed: 60 m/min • Can also be used as a pusher up to 80 kg • Drive: 32 mm steel-reinforced belt • Controlled via the Tiger Calvet system TigerStop 5.301, version TigerCalvet 4.6.8.7196

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: Hfodpfx Abok Abgvs Uer conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S1 Deflection roller (UR): Ø = 42 mm Drive drum (AT): Ø = 64 mm Belt: Type XVT-2128 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2024, SCHORR track dumper with box, tipping hydraulics and ride-on platform 500 kg load capacity 9.2 hp engine -- Self-propelled & powerful caterpillar drive -- Large & high-quality tipper body -- Folding ride-on platform fitted as standard -- Width of only 680mm -- Top price-performance ratio -- NEW & IMMEDIATELY AVAILABLE! The SCHORR track dumper RR500DHKB has a hydraulic tilt drive and a payload of 500 kg as well as a powerful 9.2 hp single-cylinder 4-stroke gasoline engine. Thanks to its slim design (680 mm), the minidumper can also drive through narrow paths and doors, making it an extremely flexible means of transportation. Thanks to the minidumper's powerful track drive, you can also overcome rough terrain, inclines and kerbs with ease. The rubber tracks provide a secure footing in any working area. Lifting and lowering the tipper body is effortless and requires little effort, even when fully loaded. With a robust trough made of thick sheet metal and removable side walls, the loading area can be enlarged if required, allowing Euro pallets or firewood to be transported, for example. SCHORR RR500DHKB minidumper - The advantages at a glance: -- Self-propelled & powerful caterpillar drive -- Large and high-quality tipper body Hfodemv Eu Repfx Ab Ujr -- Folding ride-on platform fitted as standard -- Removable side walls allow the loading area to be enlarged Technical data: Load capacity: 500kg Weight: 284kg Tilt drive: Hydraulic Engine: 9.2 HP (Loncin, 270cc) Starter: Cable starter Length: 950mm Width: 680mm Height: 465mm Track width: 180mm Pump flow rate: 9 L/min. 3 forward gears 1 reverse gear Removable trough Type of packaging: Plywood box Packaging size: 167x77x113cm Our minidumper is extremely maneuverable and is often used on construction sites, in agriculture and forestry or in gardening and landscaping as well as for conversion work. Especially in combination with one of our mini excavators, the track dumper is a worthwhile investment. The excavated material can be easily transported into a container or similar with the mini dumper. Of course, we always have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Whether you want to have the minidumper delivered or collect it from our premises in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our minidumpers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: TH431-14/698428, operating hours: 12 h, ABUS ELV Overhead Crane Runway Bridge Crane Industrial Hall Crane Load Capacity / Lifting Capacity: 3.2 t - 3,200 kg Track Gauge: 8,248 mm, External Dimension: approx. 8,400 mm Year of manufacture: 2004 with pendant control; converted in 2020 with a new hoist from 2,500 kg to 3,200 kg (conversion documentation from Abus is available!) Lifting Height: 6 m Overall Height (top of crane to hook): approx. 690 mm (Girder 300 mm + Hoist 390 mm) End carriage length including buffer: approx. 2,330 mm SWP: Used full load hours: 12 h, Theoretical remaining service life: 3,188 h Hfodpfxsx Ev E Hs Ab Ujr The crane is dismantled and immediately available. Very good condition – almost as new, test log book is available. Column-mounted jib cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder is possible – please inquire with your postcode. Collection preferred.

Condition: used, Year of construction: 2001, Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor R17 DT71D4/MM03/BW1 Electrical data: 50 Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum(AT): Ø = 64 mm Belt: Type HSL-8E Year of construction: 2001 Characteristic / Accessories: Design as folding belt possible on request Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Hedpfx Absk Aa Uge Uofr Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Year of construction: 2025, operating hours: 21 h, Powerful mini dumper in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 The SCHORR RR500 DHKB 2 PRO tracked dumper is a versatile machine powered by a powerful 270 cc 4-stroke gasoline engine with 9.2 hp. This performance allows the dumper to operate effortlessly even outdoors and offers sufficient power for demanding tasks. Advantages of the SCHORR RR500DHKA2 tracked dumper: -- Powerful 9.2 HP four-stroke engine -- Robust track drive for high traction -- 500 kg payload -- Removable side panels for increased loading volume -- Automatic opening of the front during tipping -- Standard folding ride-on platform -- 6 forward and 2 reverse gears The box body, made of robust sheet steel, is equipped with removable side panels, allowing the loading area to be flexibly expanded. Tipping operations are possible even on slight inclines. A generous tipping angle ensures that even fully loaded dumpsters can be completely emptied without the need for manual assistance. A major advantage of the dumper is the automatic opening of the front of the tipping body during tipping. This ensures particularly easy and convenient unloading, even when fully loaded. The hydraulic tilt drive allows for effortless raising and lowering of the tipping body, while the extra-large hydraulic oil tank with integrated oil filter extends the service life of the machine and minimizes maintenance requirements. The powerful chain drive ensures that even uneven terrain, inclines, and curbs can be easily handled. The durable rubber tracks provide secure footing in any work environment. Technical Specifications: Manufacturer (abbreviation): SCHORR Manufacturer's type designation: RR500 Model: DHKB2 Load capacity: 500 kg Tilt drive: Hydraulic (infinitely variable) Travel drive: Chain Weight without/with packaging: 305 kg / 335 kg Drive Engine: Air-cooled single-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 hp Transmission: 6 forward gears / 2 reverse gears Speed Forward gear: max. 8 km/h Reverse gear: max. 5 Fluids Fuel tank capacity: 6 L (unleaded gasoline) Hydraulic oil tank capacity: 3 L (ISO VG 32) Gear oil tank capacity: 1.5 L (SAE) 80W-90 Engine oil tank capacity: 0.9L (15W-40) Basic dimensions Total length of platform folded: 1870mm Total length of platform unfolded: 2105mm Total width (including chain): 770mm Total height: 1050mm Container dimensions (internal dimensions): 1040 x 700 x 300mm Container dimensions (external dimensions): 1100 x 755 x 310mm Loading volume (flat): ~ 218L Loading volume (heaped): up to 500L (depending on load) Hsdpswh I Hbjfx Ab Ujfr Drive chain dimensions: 180 x 60 x 38mm Packaging dimensions: 1600 x 770 x 1270mm Filling height with walls: 740mm without: 445mm We at SCHORR are happy to answer any questions you may have about our motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: like new (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: TH117-110-020467, operating hours: 1 h, ABUS ELK overhead crane, crane runway, bridge crane, indoor crane, crane Load capacity / lifting capacity: 5t - 5000KG Span: 18,249 mm, overall external dimension approx. 18,400 mm Hodpfx Absx Evvxs Ujfr Year of manufacture: 2013, with pendant control Lifting height: 6 m Overall height from top edge of crane to hook approx. 1,240 mm (beam 760 mm + hoist 480 mm) End carriage length with buffers approx. 3,210 mm SWP: Used full load hours 1 hr, Theoretical remaining service life 1,599 hrs Crane is dismantled and available immediately Very good condition – almost like new, inspection book is available Column-mounted and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please request by postal code Collection preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH363-14/433884, operating hours: 55 h, ABUS ELV Overhead Crane Crane Runway Bridge Crane Workshop Crane Load capacity / Lifting capacity: 5t - 5000 kg Track gauge: 13,500 mm, Exterior dimension approx. 13,700 mm Year of manufacture: 1999 with floor control Lifting height: 6 m Overall height (top of crane to hook): approx. 1020 mm (girder 540 mm + hoist 480 mm) End carriage length with buffer: approx. 270 cm SWP: used full load hours 55, Theoretical remaining service life 1545 hrs The crane has been dismantled and is available immediately. Hedpjx Evu Isfx Ab Usfr Very good condition, inspection book available. Also available: pillar jib cranes and wall-mounted jib cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarding possible, please inquire with your postcode. Pickup preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: TH360-14/433885, operating hours: 140 h, ABUS ELV Overhead Crane Crane Runway Bridge Crane Indoor Crane Load capacity / lifting capacity: 5t - 5,000kg Track gauge: 12,946mm, external dimension approx. 13,200mm Year of manufacture: 1999 with pendant control Lifting height: 6m Overall height from top of crane to hook: approx. 1,020mm (540mm beam + 480mm hoist) End carriage length with buffer: approx. 270cm SWP: approx. 140 full operating hours, remaining theoretical service life: 1,460 out of 1,600 hours!! Hfodox Enavepfx Ab Ujr Crane is dismantled and immediately available Very good condition, inspection logbook is available Column-mounted slewing cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please inquire with your postal code Collection preferred