Used Oerlikon Boehringer Vdf 180 Cu for sale (77)

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Ibodpfsy Uyf Njx Am Dsc

Year of construction: 1985, condition: ready for operation (used), Voltage: 380V, current consumption: 125/118A, control system: Philips B2T 6, equipment: hydraulically actuated turret vorhanden, enclosed working area with slant bed geometry, hydraulic clamping system, piping, condition: fully functional, very good mechanical condition, visually well maintained, partially overhauled, tool turret: angular position encoder completely renewed, turret indexes absolutely faultlessly and precisely according to the data sheet, CNC control system: power supply professionally overhauled, main spindle drive: power section/drive completely overhauled, with power chuck and base jaws. An on-site inspection is possible. Ijdpfx Ajy U Nqnom Dsbc

Year of construction: 1985, condition: used, Spindle nose: A11, turret: VDI60, voltage: 380V, rated current: 153A, fuse protection: 160A, control: Philips B2T, one tool position for boring bars is defective, no driven tools, without chuck, with documentation and maintenance records, the machine was mechanically overhauled in 2010. An on-site inspection is possible, available from mid-December 2026. Iedpfsz Agfpsx Am Debc

Condition: used, Year of construction: 1982, Center height: 220 mm Center width: 1250/1300 mm Swing diameter: over bed 440 mm Spindle bore: Spindle mount: Tailstock taper: 5 MK Spindle speeds: 11.2 - 2240 rpm Feeds: longitudinal/transverse 0.1-2.8/0.05-1.4 mm/rev Thread pitches: Electrical connection: 380 V, 11 kW Space required: 3400 x 1400 x 1300/1700 mm Weight: approx. 2700 kg Ijdevzn Itopfx Am Debc

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is an Oerlikon Nonwoven ecuTEC+ electrostatic charging machine, designed for the electrostatic charging of filter media. The machine is intended for integration into a production line and processes material webs with a width of up to 1,700 mm. The material is guided through the machine by a system of deflection rollers and electrostatically charged using charging bars. The system is equipped with an HMI control panel and can operate in constant-current or constant-voltage mode. The machine has seen very little use and is being offered due to changes in the production setup. Manufacturer: Oerlikon Nonwoven / Oerlikon Neumag Model: ecuTEC+ Year: 2020 Application: electrostatic charging of filter media Maximum material width: 1,700 mm HMI operator panel Adjustable charging system Constant-current / constant-voltage operating modes Ijdpfxozumire Am Djbc Designed for integration into an industrial production line CE documentation available According to the manufacturer's documentation, the material is guided through the machine via seven deflection rollers and electrostatic charging takes place at four charging positions. The system includes the machine frame with safety guarding, deflection roller/charging section, electrical cabinets with control electronics and high-voltage generators, and touchscreen control panel. Condition: Used, very low operating use. The machine is currently dismantled/disconnected from the production line. Detailed technical documentation is available. A comprehensive PDF specification/manual can be provided to interested buyers upon request. Inspection can be arranged by appointment. Further information, photos and documentation are available on request.

Condition: used, Year of construction: 1982, turning diameter over bed 500 mm turning length 1500 mm centre height 250 mm spindle passage 70 mm Isdpfxeqy Rp Ue Am Dobc swing diameter over face slide 285 mm turning speeds 11,2 - 2240 U/min

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Ibedpfx Amezulh Te Doc Worldwide inquiries are welcome.

Condition: good (used), Year of construction: 1994, For sale OERLIKON MATTISON R.P. 5 Vertical Surface Grinding Machine with Magnetic Circular Table – Ø 1100 mm – 45 kW Description: For sale, a vertical surface grinding machine with a vertical spindle and rotary table, manufactured by OERLIKON MATTISON, model R.P. 5. This is a very powerful and robust machine, ideal for quickly grinding large series, as well as for grinding flat surfaces, discs, blades, large rings, or large mechanical parts. Technical specifications: Brand: OERLIKON MATTISON Model: R.P. 5 Diameter of the magnetic circular table: ~1,100 mm (measured with a meter) Spindle power / main motor power: 44 / 45 kW (60 HP) Motor speed: 750 rpm Motor: SELIN Genova (380 V / 50 Hz / 87 A) Included equipment: Large, recessed electromagnetic circular table Separate electrical cabinet (380 V) Paper filter system / coolant separator with belt conveyor Segment grinding wheel head Ijdpfszpzynex Am Debc Control panel on the front

Condition: used, total length: 6,000 mm, total width: 2,250 mm, total height: 1,900 mm, Colour: Green Empty weight: 8.000 kg Price: On request - Documentation available: Yes - CE certificate present: No - Serial number: 958 - Drive system: Conventional - Centre height [mm]: 575 - Swing over bed [mm]: 1150 - Carriage turning diameter [mm]: 800 Ibsdjz Hx Tdjpfx Am Dec - Distance between centres [mm]: 3000 - Bed width [mm]: 720 - Spindle bore [mm]: 65 - Min. spindle speed [rpm]: 24 - Max. spindle speed [rpm]: 1285 - Options: Four-jaw chuck, Quick-change tool post, Fixed steady - Transport dimensions: 6000mm x 2250mm x 1900mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2012, operating hours: 7,500 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 1,500 kg, input voltage: 400 V, total width: 4,000 mm, total height: 2,000 mm, total length: 8,000 mm, cutting height (max.): 110 mm, track width: 2,950 mm, Equipment: documentation/manual, Selling an Oerlikon plasma cutting system, Plasmatome 20 HPC, Nertajet HP 300 plasma source with CPM 400/450 torch heads for aluminum, steel, and stainless steel. Cutting range 2 x 6 m, cutting current 30-260 A, power consumption 80 kVA. Material thickness of the sheets to be cut with piercing up to 35 mm, external thickness up to 50 mm. Ibodpfjv I U Hcjx Am Djc Sold without cutting table.

Condition: ready for operation (used), Oerlikon SL-2, bevel gear lapping machine. Ibodpfsz H Np Aox Am Dec

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 Ijdpfx Ameunhd Ro Debc - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Largest drilling diameter into solid material: 55mm for cast iron with feed: 0,6mm/rev. Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: good (used), Year of construction: 2008, Offer 26289 Ijdpfszvnb Ssx Am Dsbc Approximate technical specifications: - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table!

Condition: used, Year of construction: 1983, functionality: limited functionality, feed length X-axis: 1,700 mm, feed length Y-axis: 650 mm, feed length Z-axis: 700 mm, table width: 570 mm, table length: 2,000 mm, Oerlikon FM 3 CNC milling machine Heidenhain TNC 320 was used until recently for milling weld preparation edges Tool holder: SK 50 Loading possible with an overhead crane Ibodpfx Ameyp Dxuj Djc

Year of construction: 2007, condition: used, Welding power source: Starmatic 1003 DC, max. welding current: 1000A at 100% duty cycle, lifting column height: 4850mm. Including flux tray, rail and vessel turning device. Documentation available. An on-site inspection is possible. Ijdpezxhl Asfx Am Djbc

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Ibjdpfxeuanq Te Am Dec

Condition: used, Year of construction: 1941, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 860 mm, turning length: 2,500 mm, center height: 400 mm, workpiece weight (max.): 10,000 kg, spindle bore: 57 mm, total length: 5,100 mm, total width: 1,860 mm, rotational speed (min.): 6 rpm, rotational speed (max.): 250 rpm, Equipment: documentation/manual, For sale: Oerlikon DM4S conventional lathe, manufactured in 1941. Dimensions: Estimated weight: 10 tons Center height: 400 mm Footprint: 1860x5100 mm Distance between centers: 2500 mm Spindle bore: 57 mm Options: Multi-fix turrets Isdpey Taplsfx Am Debc 4-jaw chuck Ø1050 mm Rapid traverse Numerous accessories... Inspection and testing possible at 1822 Chernex, Switzerland. Price: 5,000 Euros (negotiable) Travel and transportation costs are the responsibility of the buyer. More photos or videos are available upon request. Please contact me for further information.

Condition: used, functionality: unexamined, For sale is a Leybold RUTA vacuum pump unit in adapter configuration, consisting of a RUVAC WS 501 rotary lobe pump and a TRIVAC D 65 B rotary vane pre-pump. Technical data and markings: - Configuration: RUVAC WS 501 / TRIVAC D 65 B / Adapter - RUVAC catalog number: 11732 - RUVAC nominal pumping speed: 505 m³/h - TRIVAC D 65 B, catalog number 11296 - TRIVAC serial number: 31000491088 - TRIVAC pumping speed: 65 m³/h - Pumping speed of the pump unit at 0.1 mbar: approx. 380 m³/h - Ultimate partial pressure: < 2 × 10⁻⁵ mbar - Installed motor power: approx. 4.4 kW - Connections: DN 63 ISO-K on the suction side, DN 40 ISO-KF on the discharge side - Druschke article number: SGWS501 - Druschke serial/ID number: 11732-ID15931 - RUVAC marking 2003/08; TRIVAC marking CW 31/2011 Visible scope of supply according to the images: Ijdpszzr Nkefx Am Debc - RUVAC WS 501 - TRIVAC D 65 B - Direct adapter - Side filter/separator housing - Connection line, cable, and plug - Base frame with drip tray Used condition with dirt, paint damage, and slight corrosion. The operational condition and achievable vacuum performance were not re-tested after disassembly; therefore, it is sold as untested. A control cabinet or frequency inverter is not shown and is not part of the described scope of supply. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and by prior agreement. The transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Ibedpfjyucd Hox Am Doc Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Only single profile grinding possible, see photo.

Condition: used, Year of construction: 2007, max. wheel diameter 400 mm workpiece dia. 36-300/400 mm axis distance 135-290 mm spindle turning speed - stepless 3000 1/min dist. between centers 100-550 mm Control Siemens 840D weight of the machine ca. 4000 kg dimensions of the machine ca. 2000x3055x2788 mm Test method: Ibedsy D T Sujpfx Am Dec - Single flank rolling test - Double flank rolling test - Structure-borne noise test - Heli testing in two-flank contact. Features: - Use of up to 6 test slides - Highest testing accuracy and repeatability - Machine table with workpiece drive - Swiveling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: W000257776, type of input current: three-phase, type of cooling: water, welding current (min.): 20 A, welding current (max.): 400 A, Oerlikon Citopuls MXW 420 MIG/MAG welding machine with water cooling – 400 A For sale is a used Oerlikon Citopuls MXW 420 MIG/MAG welding machine from the production stock of Syntegon Technology GmbH. The machine was used in its own production and is being sold due to a production and inventory consolidation, as it is no longer needed. The machine is functional and has been regularly inspected. The annual safety inspection certificate is available. This powerful industrial machine is particularly suitable for demanding MIG/MAG welding applications in the fields of mechanical engineering, metal construction, maintenance, and manufacturing. The water cooling ensures reliable operation even at higher welding currents. Technical data: Manufacturer: Oerlikon Model: Citopuls MXW 420 Year of manufacture: 2007 Serial number: W000257776 Welding current range: 20 – 400 A Power connection: 400 V Welding process: MIG/MAG [Machines_...likon 2134 | Excel] Water cooling with existing water cooler Welding torch included Condition: Functional Safety inspected Used, from ongoing production Ibsdjzlrwcopfx Am Dsc The machine is ideal for workshops, metalworking shops, metal construction companies, as well as training and repair companies looking for a reliable industrial welding machine. Inspection possible by prior appointment. Loading upon agreement. Important conditions: Please note that the sale of this machine is only possible under the following conditions: • Sale exclusively to end users/manufacturing companies (no resale to dealers) – corresponding company profile required • Sale only within Germany Sales/transfer conditions: • Disassembly, removal, and transport are the responsibility of the buyer and at their own risk. • The buyer is responsible for providing personnel, tools, and transport equipment. Personnel may only work with appropriate personal protective equipment, and only trained personnel may be used.

Condition: good (used), Year of construction: 1973, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 860 mm, Oerlikon milling machine, lightly used, only employed for punch tool repairs. Guide columns are like new, showing no signs of wear! Highly precise, equipped with FAGOR CNC control. Suitable for workpiece weights up to 3000 kg. Ibodpfx Amjz Duqas Dsc

Condition: good (used), Machine is in good condition. Isdpfxszb Nfqo Am Dobc

Condition: good (used), BALZERS LTE 020 – Thermally regulated sample preparation station ✔ Applications: Coating technology, semiconductor processing, surface analysis, electron microscopy. • Digital display unit with 4 channels (B1–B4) • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate control for power supply and lamp • Power supply: 220 V Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Ibodpsxl A Edofx Am Dsc You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Arbor for Oerlikon Spiromatic, bevel gear milling machines. Iedpoz H Nvvefx Am Djbc