Used Oil Skimmer for sale (6,629)

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm Godpfx Ajzt I Rzjn Ieug -Weight: 22.2 kg

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Gusdpfox El Abjx An Ieg

Condition: like new (used), Year of construction: 2016, operating hours: 46,000 h, functionality: fully functional, overall weight: 1,890 kg, motor manufacturer: garden denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, noise level: 75 dB, type of cooling: water, color: blue, Equipment: type plate available, Oil-free Screw Compressor Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter COMPAIR D75HRS Screw Compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75kw power, air flow: 11.4 m3/min / 684m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2016.11 hours: 46000 Drive power: 75Kw Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400v 50Hz 3 phase 85A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. Gedpfjw Nzrfox An Ieug

Condition: used, Dimensions: 2430x2400x2730 mm Trolley dimensions: 800x1000 mm Capacity: minimum 180 baguettes Usable baking surface: 32 m² Burner location: Top Model: R1016-6 / 4130901 Iedcowxl R Esu T Rxijii Power: 5.0 kW Gsdpfx Aswxl R Ejn Ieug Voltage: 400 V Year: 1996 Gas burner

Condition: used, - Dimensions LxWxH: 2150x1970x2730 mm - Model: LR-812-H - 2 trolleys: 800x600 - 360 baguettes - Baking surface: 19.2 m² - Refractory stone system Gusdpsytc A Hsfx An Ijg - Power: 5 kW - Voltage: 400V - Rotating rack convection oven with integrated heat recovery and heat distribution to the interior through refractory stone walls 1- Exhaust duct 2- Convection turbine 4- Rotating mechanism 5- High-performance steam generator 6- Suction wall 7- Suspended rotating rack(s) 8- Insulation 9- Rotating tray

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. Godpfx Anjzutgko Ieug The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Guodpfx Anjyrncis Ijg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling

Condition: used, - Type: Professional deck oven - 5 decks × 3 chambers - 15 openings - Energy source: Triple fuel – gas/wood/diesel - Heating system: Annular tubes for uniform heat distribution - Usable depth: 2,200 mm - Condition: Almost new, used only for commissioning and ignition tests - Previous use: No commercial production, only technical tests - Structure: Full stainless steel, durable and easy to maintain - Cooking type: Stone hearth - Controls: Manual adjustment Godpfxszhk Rme An Ioug - Operating temperature: Up to 300°C - Insulation: High density, limiting heat loss and consumption - Overall dimensions: Large structure suitable for production workshops - Production capacity: Ideal for high-volume baking (bread, pizza, pastries, etc.) - Overall condition: Excellent

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Equipped with automatic air and temperature control for the workspace. Gusdpfx Ajxnlwzon Ieg An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, Year of construction: 2009, machine/vehicle number: Bongard Cervap 600/9.222, - Brand: Bongard - Model: Cervap 600 / 9 chambers - Type: fixed-deck oven - Technology: steam tube - Energy: gas or oil - Configuration: 3 decks - Number of lanes: 3 lanes - Lane width: 600 mm - Total number of chambers: 9 - Usable height per deck: 170 mm - Application: bakery - Application: pastry - Application: viennoiserie - Conduction baking - Radiant baking - Annular steam tubes - Refractory stainless steel hearth Godpfx Aey Du I Den Isug - Integrated steam generator per deck - Standard control: Ergocom - Optional control: Opticom - Baking surface 600/9.222: 12.10 m² - Floor area 600/9.222: 8.40 m² - The Bongard Cervap (model 600/9.222) is the reference oven for traditional French bakeries, renowned for its exceptional robustness with 3 baking decks, each divided into 3 lanes, making a total of 9 chambers.

Condition: used, Year of construction: 2020, machine/vehicle number: LF 4.3.2, - Brand: Logiudice Forni - Model: Steam LF 4.3.2 - Catalogue reference: LF-432 - Type: steam deck oven - Technology: annular tube - Number of decks: 4 - Number of mouth openings: 12 - Doors per deck: 3 Gujdpjy Du Eiofx An Ieg - Door width: 620 mm - Baking surface: 17.95 m² - Chamber dimensions: 1860 x 2410 mm - Chamber height: 200 mm - External dimensions: 2420 x 3830 x 2680 mm - Weight: approx. 12,000 kg - Thermal power: 120,000 kcal/h - Thermal power: 139 to 140 kW - Electrical power: 1.5 kW - Energy: gas, oil, or wood - Origin: Italy - This Logiudice Forni oven (reference LF 4.3.2) is a professional Italian-made deck oven, designed for high-output artisanal bakeries.

Condition: ready for operation (used), functionality: fully functional, fuel: diesel, For sale: 2 oil-powered high-pressure cleaners, including accessories, extraction system, oil tank, and remaining oil. The system is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. Gsdjzvc A Rspfx An Isug Location: Neusäß, near Augsburg. Condition and dimensions can be seen in the pictures.

Condition: excellent (used), Year of construction: 2001, For sale is a fully functional and very well-maintained gas burner from Weishaupt, model RGL40, including gas piping (Dungs DN); with control unit and burner control system; in TOP CONDITION. Gujdjy Urrzopfx An Iog 1. Burner type: RGL20/1-B Output: 450 - 2550 kW Design: ZM Year of manufacture: 2001 Connection pressure: 15-500 mbar

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Gedpfx Asqmmffon Isug Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: good (used), Oil-water separation system for compressor condensate External dimensions: Diameter: 600 mm Height: 1180 mm Weight: approx. 50 kg Condition: good, second-hand Gusdpszh Iddofx An Isg

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange Guodszxwxxjpfx An Iog -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 157, working width: 400 mm, overall weight: 2,200 kg, total width: 400 mm, For sale: a complete, used line for applying and curing oil/oil-wax on wooden floors (Soest + Prochera). I am selling a set of four machines that form a line for oil-waxing floorboards, used in a production facility for two-layer parquet in Krotoszyn. The line has not been used for approximately 3 months and has been regularly maintained and repaired during this time. The set includes: 1. SOEST RC-L-400 (Netherlands): application unit with a roller, serial number 157, year of manufacture 05/2017, total weight 580 kg, CE marking. 2. SOEST VP-400-2P-B (Netherlands): spreading/brushing unit (spreading oil, stain, or other coatings using pads and brushes), serial number 264, year of manufacture 05/2017, total weight 480 kg. 3. SOEST UV-3-400 (Netherlands): curing/drying unit, serial number 286, year of manufacture 04/2018, total weight 780 kg, CE marking. Gedpfezrm Ucsx An Ijug 4. PROCHERA SPL1-400C (Poland, Ziębice): brushing/polishing unit, no. 7, year of manufacture 2024, weight 355 kg, power 2 kW, CE marking. All units have a working width of 400 mm and are equipped with integrated conveyor belts and control/electrical cabinets. Total weight of the set: approx. 2,195 kg. Technical condition: unused for approx. 3 months, regularly maintained and repaired. Price: PLN 182,500 net (negotiable), plus VAT. Note: the line is sold as used, in its current condition. Before purchasing, an on-site inspection and individual verification of suitability for a specific type of finish are recommended (e.g., UV oil vs. classic oil-wax cured by air).

Condition: used, machine/vehicle number: Bongard 10.16, functionality: fully functional, -10 outlets -This oven is a Bongard 10.16 deck oven, a true classic for artisanal bakeries -Type: deck oven with ring-shaped tubes -Energy: gas or oil -Baking surface: 10 m² -Useful height per deck: 200 mm -Number of decks: 5 Guedpfx Anjy Duzws Iog -Doors: 600 mm, 2 doors per deck -Controls: panel on the right -Steam: high-performance steam generator heated by exhaust gases -Voltage: 400V

Condition: used, functionality: unexamined, Used Samoa high-pressure oil (reelmaster) hose reel + oil ratio pumps Manufacturer: Samoa Complete with 7 x Samoa air-powered ratio pumps / high-pressure stripped pumps Complete lot with accessories. Guedpfoxt Ekfjx An Iog

Year of construction: 2017, condition: good (used), machine/vehicle number: 4789, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Gusdoqmmcgjpfx An Ijg

Condition: used, - Dimensions: 1970x2150x2730 mm - 2 racks: 800x600 mm Gujdpfx Anow Enwze Iog - Serial number: 3002245 - Model: LR1-812H - Year: 01/2017 - Baguette capacity: minimum 360 - Baking surface: 19.2 m² - TOUCHMATIC touchscreen control panel - Voltage: 400V - Power: 5 kW Ndsy Tdjw Enwzjxugsa - Burner: Gas - Maximum baking surface with minimal footprint, compact and robust construction - Significant increase in productivity - The right choice for a wide range of requirements - The impressive dimensions of HEINLUXROTOR rotary ovens (baking surface relative to floor space) are made possible by the integration of the burner in the upper section and an optimized airflow design.

Condition: good (used), Oil-water separation system for compressor condensate. Gedpfezqc Uvox An Isug Height: 1000 mm Width: 500 mm Depth: 500 mm Weight: approx. 20 kg Condition: good, second-hand

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the Guedpfxsqmmkke An Ieg scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Year of construction: 2012, VapoReal model by Real Forni, equipped with 12 doors. 220 cm. Type: steam tube oven Brand: Real Forni Model: VapoReal / Vaporeal - 4 decks - 12 loading mouths Gjdpfx Ansy Dt S Io Ijug

Condition: good (used), Year of construction: 1996, BERTRANS HT594 THERMAL OIL BOILER Automatic vertical thermal oil boiler manufactured by BERTRANS, equipped with a WEISHAUPT modulating burner. TECHNICAL DATA Gujdpfx Anjzvf Rko Ieg Manufacturer: BERTRANS Model: HT594 Boiler type: Thermal oil boiler Configuration: Vertical Operation: Automatic Thermal oil volume: 6.01 m³ Maximum working pressure: 35 bar Manufacturing number: M1101009/IB Burner manufacturer: WEISHAUPT (2003) Burner model: WKG 3/0-A ZM Burner output range: 1,200–12,000 kW Burner serial number: 4,177,116